Cannot connect statefully to AuroraServer using inst1_http

I tested inst1_http using Net8 successfully. But when I run the url on the brower, I got "Cannot connect statefully to AuroraServer using inst1_http" message on the error.log file. Could some one let me know the cause?
Where can I find the log information about mod_ose, and ose?
Thanks,
Lixin

I am on Win 7 64 bit. iTunes and one other program I use could not make a secure connection although I was able to securely connect to online banking, etc. I tried ten different settings I read about in various posts under "Secure Connection" including the links about in your post. Nothing worked.
What finally worked for me was going into Control Panel, then selecting Internet Properties, then going to the Advanced tab, and then scrolling down to the Security section and unchecking "Check for server certificate revocation*" Note that I undid trusted sites (e.g. no trusted sites needed) and undid all the special Norton IS 2009 firewall settings and everything still worked. This seemed to all start with the updates starting with iTunes rev 9 but I can't be sure as I recently upgraded to Win 7 Premium Home from Vista Ultimate.
Hope it works for you. I will post this in a few other discussions on the same as I have not seen anything before that worked in my case.
Good luck.

Similar Messages

  • My Macbook Pro cannot connect to the internet using an ethernet cord.

    My Macbook Pro cannot connect to the internet using an ethernet cord. It was working fine for weeks, then all of a sudden just stopped. What could the problem be?

    Hi bean07670,
    If you are having an issue with the Ethernet connection on your MacBook Pro, you may find the following article helpful:
    Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
    http://support.apple.com/kb/TS1317
    Regards,
    - Brenden

  • TS1368 I cannot connect to iTunes store using iTunes. 'Secure link to iTunes store failed'. Please help!

    I cannot connect to iTunes store using iTunes. I have version 11.0.2.26 on Win 7 pc. I have had no problems until recently. Can't say exactly the problem began as I don't normally use my computer to access the store but my last successful access according to iTunes diagnostics was 28th Feb 2013 (if thats useful?!)
    I've run the Network Connectivity Test in iTunes diagnostics and I got the following results:
    - Network interfaces verified.
    -Internet connection verified.
    -Secure link to iTunes failed.
    When I click the help button next to the 'Secure link to iTunes failed' message I get the following:
              ''iTunes Help is unavailable because your computer isn't connected to the internet.'
    My pc is connected to the internet. I've checked firewalls. Windows firewall is off. I'm running AVG internet security 2013. Iv've checked the firewall settings on that and iTunes is not being blocked.
    Getting kinda frustrated. Can anybody help please???

    I seem to have tracked down the problem. AVG Family Safety software was causing the issue somehow. I have uninstalled it and iTunes now working. I will contact AVG for a solution as I now have no way of blocking certain sites.

  • My pc cannot connect to iphone 4 using bluetooth,says no bluetooth driver.

    my pc cannot connect to iphone 4 using bluetooth,says no bluetooth driver.

    What exactly are you trying to achieve by connecting via bluetooth? If you have a tethering plan, that's the only thing that's supported via bluetooth to a computer. It cannot sync or transfer files via bluetooth. Those are not features of the iPhone.

  • Cannot connect to the net using my wi fi on my blackberry curve

    hi there, i cannot connect to the net using my wi fi on my blackberry curve 8520. wen i go in to settings and click on to manage connections it as a tick at the side of wi fi  and says TALKTALK- 3B0BD4 and a tick at the end. if i turn my mobile network of my signal goes,  and when i try to connect to the net a message comes up saying  unable to connect to the internet, please try again later. if the problem persists please contact your service provider.when i try to set up a new wi fi connection and scan for networks it comes up with TALKTALK-3B0BD4 and undernieth it says connected and the signal is full at the side of it? many thanks maria

    i cannot browse the internet thru wifi using bb curve 9360..when i checked  my wifi settings it  says that im already connected but when im trying to browse it says cannot connect contact your service provider

  • Cannot connect to FMS 4 using rtmfp

    Hi people,
    I was try to connect my FMS 4 development server (Redhat linux OS) in live which was not connected, but the same setup in local windows is connected.
    I do know whats the exact problem. Also i will stop the iptables in linux but no use. Please any idea, its worthful.
    thanx and regards
    Suresh

    Hi Nikhil,
    Appreciate your reply.
    Both Firewall and the SELinux are disabled. But still cannot access the FMS
    Server using http://ip-address. Windows installation works perfectly. But
    still I can Telnet to port 80,1935 and 111 in the Linux installation. This
    is weird. I don't know why the only the Linux setup is not working. Any
    idea that I need to change any configuration in the Linux setup? Here is
    the Linux version I've installed,
    Re: Cannot connect to FMS 4 using rtmfp# uname -a
    Linux GSMedia 2.6.18-274.12.1.el5 #1 SMP Tue Nov 8 21:37:35 EST 2011 x86_64
    x86_64 x86_64 GNU/Linux
    Re: Cannot connect to FMS 4 using rtmfp# cat /proc/version
    Linux version 2.6.18-274.12.1.el5 ([email protected])
    (gcc version 4.1.2 20080704 (Red Hat 4.1.2-51)) #1 SMP Tue Nov 8 21:37:35
    EST 2011
    Re: Cannot connect to FMS 4 using rtmfp# cat /etc/redhat-release
    Red Hat Enterprise Linux Server release 5.7 (Tikanga)
    Thank you.
    Viraj
    From:     Nikhil Pavan Kalyan <[email protected]>
    To:     Kularatnav2012 <[email protected]>
    Date:     01/05/2012 03:57 AM
    Subject:     Re: Cannot connect to FMS 4 using rtmfp Cannot connect to FMS 4 using rtmfp

  • I cannot connect to the net using 3G, i have ipad2 16GB, i have tried resetting my ipad2, and resetting the network setting, my location is here in riyadh, everitime i try to connect to the net theres a pop message saying "could not activate cellular data

    i cannot connect to the net using 3G, i have ipad2 16GB, i have tried resetting my ipad2, and resetting the network setting, my location is here in riyadh, everitime i try to connect to the net theres a pop message saying "could not activate cellular data network, please help me guys thanks.....

    Thanks for the quick response. No, I did not get any error messages or any terms-of-usage screen. The employee I told my problem to was not computer savvy either. She just suggested I move to different spots w/in the library to see if that would make a difference. It didn't. When I connected to the library WiFi it did change the Verizon 3G that is usually in the upper left corner to iPad with two to three emanating arcs. I may have to go to the library in the next town. I was able to connect to theirs in the past when I had to download something greater than 20 MB. Unless I really want it, I will probably not even try to download something more than 20 MB due to the hassle. Yeah, I may have been better off getting a normal desktop or laptop and getting WiFi at home. To do that now would mean having my iPad 2 and a desktop computer, which I feel is extravagant. (I know there are a lot of big spenders out there who got the iPad as additional gadget for fun. This is a rich country.) A Verizon rep told me I couldn't set up a WiFi router at home just using an iPad. So it seems like a person who just uses 3G is limited to surfing the net (not even much YouTube because it eats a lot of data) and using email. I read about an app that helps print wirelessly using 3G, but a reviewer said you had to be an engineer to get it done right. BTW, I like the Steelers. I'm old enough to remember Franco Harris and that blond guy whose name escapes me back in the '70s. Since I live in North Jersey I feel I have to support the Giants. But I know football about as well as computers.

  • I cannot connect to the internet using apps but im connected to the internet!

    i cannot connect to the internet using apps but im connected to the internet!

    What makes you think that you are connected to the internet then?
    Try:
    - Resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset ntwork settings: Settings>General>Reset>Reset Ntwork Settings.
    - iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • My iphone 4s cannot connect the internet sometimes using the 3G, but sometimes it does work. i do not know what is wrong ?

    my iphone 4s cannot connect the internet sometimes using the 3G, but sometimes it does work. i do not know what is wrong ?

    5.0.2 has not been released, thus you can not upgrade.
    Stedman

  • Cannot connect to mobile hotspot using wpa; only open security works

    I have a Galaxy S5 and am trying to connect to the mobile hotspot using my Surface tablet.  If I have the mobile hotspot setup using WPA2 security with a password I cannot connect however I can connect if I am using Open security.
    I can connect the surface to other routers using WPA security, just not the Samsung as a mobile hotspot.
    does anyone have any suggestions?

    What you have proved here is that your tablet has a password conflict somewhere.  You should find out where your wireless profiles are being stored on that device, wipe them out and then try connecting again.  Once you provide the tablet with all of the correct connection credentials and configurations it should connect just fine.
    Connecting without a password proves there is not a WiFi issue.  Connecting to other devices is additional proof that there is not a WiFi issue going on.  You just need to straighten out the security issue and then will be good to go.

  • Cannot connect to the cloud using Adobe Ideas

    I've been through 2 (two) Adobe Technicians and neither of them could help me. One of them told me that Adobe Ideas wasn't meant to be used with an iPad.
    I can email an illy from Ideas, but cannot connect to or see the Creative Cloud files.
    Do I need additional software, Apps, or what?? Any ideas for Ideas?

    i cannot browse the internet thru wifi using bb curve 9360..when i checked  my wifi settings it  says that im already connected but when im trying to browse it says cannot connect contact your service provider

  • Cannot connect to App Store using the App in the dock.

    Trying to buy the OS X Lion software.  Using the required App Store app just gives message cannot connect to store.  Internet connection working fine, can connect to ITunes, Apple, etc, but cannot buy Lion because always redirected to use app in dock which doesn't work.  Did all suggested fixes and still can't connect to store.  How can I connect using app in dock?

    Click on the Dock icon, remove it from the Dock, open /Applications, and use the App Store.app. If that doesn't work, create a new admin user account, and try there or reinstall the 10.6.8 v 1.1 update, repair permissions, and try again.

  • Cannot Connect to Essbase Server Using MaxL

    After installing and configuring planning. I was able to create data source and application. When I shot down and restart the machine. The diagnostics report highlighted these srrors
    EPMVAL - 01010 can not connect to Essbase server using MaxL
    Network Error - 10061 unable connect to oracle.vision.com:1423. the client timed out waiting to connect Essbase Agent using TCP/IP
    Can some help please
    chi

    Hi John
    This is error from Sharedservices_security_client may it will you to identify the cause of this issue
    PMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
    [2012-03-04T17:29:20.953+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
    [2012-03-04T17:29:24.906+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
    [2012-03-05T05:21:13.515+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
    [2012-03-05T05:21:19.359+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
    [2012-03-05T05:21:24.890+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
    [2012-03-05T10:08:08.812+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
    [2012-03-05T10:08:14.875+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
    [2012-03-05T10:08:18.890+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
    Thanks
    Chi

  • Windows 8.1 laptop cannot connect to the internet using USB Mobile Broadband stick.

    I bought a new laptop and it came with Windows 8.1 installed. Well, things worked perfectly until I wanted to connect to the internet using my mobile broadband USB stick. I installed the software that came with the stick, and my laptop recognize
    the stick but I still cant connect to the internet. The stick workes perfect in my Windows 7 and Windows 8 laptops, but IT DONT CONNECT WITH MY WINDOWS 8.1 LAPTOP. What can I do to troubleshoot this???
    HOPE I AM SPECIFIC ENOUGH THOU...

    The PC Repair Guy,
    If you haven't already, verify that you can connect to the internet through some other means such as Wi-Fi or Ethernet with your laptop to rule out any network setting issues.  If you are able to connect successfully to the internet, use that opportunity
    to make sure you have
    Windows 8.1 Update installed as well as any other applicable updates your laptop may require.
    You may also want to check the
    Windows Compatibility Center to make sure that your device is compatible with Windows 8.1. 
    Another possibility is that the driver your laptop is installing for the device isn't the correct one.  Check the device manufacturer's site for the most up to date driver they have available for Windows 8.1.
    Hope this helps!
    Mike
    Windows Outreach Team – IT Pro

  • Cannot connect to Office 365 using Powershell on Windows 7 SP1

    Hi,
    I was trying to connect to Office 365 using windows azure active directory module for Windows Powershell.
    $Cred = Get-Credential
    Connect-MsolService -Credential $cred
    It failed on my windows 7 machine with the error
    Connect-MsolService : Unable to authenticate your credentials. Make sure that your user name is 
    in the format: <username>@<domain>. If this issue persists, contact support.
    This issue happened in Windows 7 SP1 OS.
    But, when I tried the same thing on a Windows 2008 R2 VM, it connected successfully.
    This means that the account I was trying to login does have the permissions.
    Both the machines ( windows 7 and windows server 2008 R2) have the following pre-requisites installed:
    Install Microsoft Online Services Sign-in Assistant: http://www.microsoft.com/en-us/download/details.aspx?id=39267
    Windows Azure Active Directory Module for Windows PowerShell (64-bit version) 
    I checked for other settings needed for this to work at :
    (Though these settings are for Windows 8, I have all these settings in Windows 7 as well)
    http://community.spiceworks.com/how_to/show/45453-how-to-prepare-a-windows-8-64-bit-pc-to-manage-windows-azure-ad-office-365-using-windows-powershell 
    Can someone please tell what is going wrong on my Windows 7 SP1 environment.
    Thanks,
    Gagan
    Gagan

    Hi,
    Have you install installed .NET Framework 4.5 and Windows Management Framework 3.0 on Windows 7 Service Pack 1 (SP1)?
    Please go through the below article to know more about what is the requirements to Connect to Exchange Online Using Remote PowerShell:
    http://technet.microsoft.com/en-us/library/jj984289(v=exchg.150).aspx
    In addition that, hope the below link be helpful:
    Connect-MsolService : Unable to authenticate your credentials. (Wrong WebServiceUrl value in Registry)
    http://jesperstahle.azurewebsites.net/?p=42
    Regards,
    Yan Li
    Regards, Yan Li

Maybe you are looking for