Cannot connect stereo using bluetooth

it runs great using bluetooth to connect my stereo and iphone/ipad/ipod. However, it doesn't work for my macbook. I can find my stereo bluetooth device and the connection is successful. However, there is no sound and then the bluetooth kick my macbook out. Also, there is the message on macbook that "error....."
What should I do for this issue?
I am using 10.6.8
Thank you,
Pipat

Hi,
Frist u need to open Media in the BB open Menu, select Receive Using Bluetooth. I your PC select file you want to transfer, then right click Send via Bluetooth.. In your phone select file to SAVE.
Hope This Will Help.

Similar Messages

IPad2 can't connect ipod2 using bluetooth

IPad2 can't connect ipod2 using bluetooth
why? Can anyone tell the reason?

For what purpose are you trying to connect the two?
Bluetooth between iOS devices is limited to only specific peer-to-peer apps for specific functions (like mutiplayer games).
You cannot just pair the devices, you need an app that specifically uses Bluetooth for communication.

How can I stream music from my ipad2 to my car stereo using bluetooth?

Trying to connect my ipad 2 to my car stereo using bluetooth. Do I/can I do this with or without additional harware?

I don't think it's possible.
If the hyperlink doesn't work, try again. There is a problem at the Apple site.

New to the iphone, I cannot connect with the bluetooth to other devices, any help?

I have a new IPhone 4, I cannot connect with other bluetooth devices - any help??

What, exactly, are you trying to pair your phone with? These are the only supported bluetooth profiles:
http://support.apple.com/kb/ht3647

Unable to connect internet using Bluetooth in my E...

Hi
Iam using Nokia E5.
Iam able to connect to mobile internet to laptop using USB connection,while using bluetooth for connceting internet iam getting below error.
"failed to connect to network.the modem is in use by another application ormay not be configured properly"
please advise how to over come this.

Same problem here with E72...well in 75% of cases, sometimes it connect easily, which make me believe the settings are correct.
Any news here? Does the problem lie with the computer or with the phone? Sometimes, but usually not, restarting one or both device helps.
Thanks,

I have ios 8.1 on my iphone 5s and I cannot connect to my bluetooth in my 2013 honda accord

I have ios 8.1 on my 5s Iphone but cannot connect to Bluetooth on my 2013 Honda accord

Hello 3lion0,
For issues connecting to your iPhone to your car via Bluetooth, then check out the articles below to get it sorted out. The first one will walk you through resolve conflicts with your iPhone and iCloud and unused devices. The other article is general troubleshooting if the first article does not work out.
If you can’t use a Bluetooth accessory or car kit
http://support.apple.com/kb/ht6473
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Regards,
-Norm G.

How to connect mega516 using bluetooth

I can't connect megaplayer 516 and nokia 6230 using bluetooth.
my handset ask me to type passcode for megaplyer.
pls help me

The passcode should be 1111, hope its not too late

Cannot connect to mobile bluetooth device in my car

I have an iPhone 4 and cannot connect zu the mobile bluetooth device in my car. My iPhone doesn't find it. Can anybody help?

http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-84194-1&lc=en&dlc=en&cc=us&...
if you don't have it , download and install hp wireless assistant and when your driver installation tells you to turn on bluetooth, open hp wireless assistant and turn it on.
Did someone help you? Pay it forward. Help someone else.
NC4400, TC4400 Win 7 Ultimate, xp pro, both dual boot
a bunch of thinkpads

How do I connect printer using bluetooth

What do I need to do to my printer so I can use bluetooth to make a wireless connection. I saw a bluetooth device that plugs into the usb plug on the printer, is that all there is to it.
Thanks
Happypappy

The Bluetooth profile HCRP is :
HCRP (hardcopy cable replacement profile). This profile allows the transfer of rendered data between Bluetooth-enabled devices, such as between a laptop and a printer. It is assumed that the client device (in this case, the laptop) will include a driver that renders the data. Note that Mac OS X supports Bluetooth printing through the Mac OS X printing API.
(from the Apple Bluetooth Device Access Guide )
To have the HCRP profile, you'll need to have Bluetooth software 1.5, or later. I'm running OSX 10.2.8 and ASAIK I have Bluetooth 1.3.2, so I don't have the HCRP profile.
You can use the Bluetooth Setup Assistant in /Applications/Utilities to configure your Bluetooth device, once the device is within range.
To sum up, whether the Bluetooth adapter in the link will work for you depends on the OSX version you're running on your G4. I would guess if you're running Panther, or Tiger, you'll probably have HCRP.
Sorry I can't be of more help.
Ed
PB G4 Mac OS X (10.2.x) PM G4 Dual 1.25, PM G4 Dual 867, OSX 10.2.8, OSX Server 10.2.8

Cannot connect E71 using Wlan

Hi,
Since I have purchased E71 I have never been able to connect via Wlan. Are there any advance setting to be done.
Wlan get detected on the phone but when I try to browse using the access point it says cannot connect.
Thanks,
Sameer

Hi,
which security settings, you have enabled on your hotspot ?
Whcih WLAN standard is used (b\a\g\n) ?
What Router is used ?
Guess we need to have this information to help you out further.
Br, Oliver

Connecting ovi using bluetooth win7 64x on nokia 5...

Dear All,
I'm was desperately trying to connect my nokia 5230 using bluetooth and as i struggeled a bit i thought i'd just as well share what to do... (in my case at least)
I have Win7 x64 with "Bluetooth Stack for windows by Toshiba" - v7.00.11
Check this by viewing the "info" of the software that came with your bluetooth adaptor (bluetooth tray icon - info)
system requirements: http://europe.nokia.com/support/download-software/nokia-ovi-suite/compatibility-and-download (don't forget to click the "View full system requirements"
bluetooth settings on the nokia are active etc... all should be good
when i try to connect from my phone to my laptop:
bluetooth : on
my phone's visibility: shown to all
laptop shows as available device
error message: pairing device with laptop: unable to pair with ...
when i try to connect from my laptop to my phone (by adding a new connectiong using bluetooth adaptor software)
phone shows as available device
error message: detection of service has failed
when i try to connect from my laptop to my phone (by adding a new device using Ovi)
error again...
Solution: change some default settings in the bluetooth adaptor sofware
search the options for "security" and manually check the box "forced security connection level (verification and encryption)" (or something like that, mine is in dutch)
I then easily connected the devices using ovi. (ps: this doesn't work when the adaptor is already in use so make sure to close any windows open from previous attempts like with the bluetooth adaptor software)
A lot of connections attempts are made to the phone so just keep accepting them and after a while the ovi software will indicate the devices are connected.
you'll see the laptop appear as a paired device on your nokia 5230, make sure to set it as "authorised"
ps: i also had to search a bit to find the "paired devices" so on your nokia 5230...
press the white central button to go to the options menu
select settings
select connectivity
select bluetooth
select the central icon at the top of the screen
you should be in the "paired devices" section now
select the device you want to connect too & set as authorised
(you can also initiate a new paired device from this menu...)
Greetings,
Manuel

Similar issue faced by me as well.. not all the tracks was transferred on the first sync.. so I manually copied them to device. But tried the second time, this time I deleted all the songs in device and transferred using Ovi suite, surprisingly it worked this time
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

I just got an iPad 2 16 gb and was wondering how I can upload pictures from a micro sd card but my iPad is saying cannot connect device using too much power. I have tried a 16 gb micro sd card and 4 gb micro sd card. Can anyone help please??

I got an iPad 2 and I cannot get my pictures to upload from a micro sd card as the iPad is saying device not accepted using too much power. Can anyone help? My iPad 2 is a 16 gb and my micro sd card is 4 gb

You can use a USB flash drive & the camera connection kit. First download the pics to your computer.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
 Cheers, Tom

Cannot Connect To Lenovo Bluetooth Laser Mouse

Today, my T61 Thinkpad's fan broke down and therefore the hard drive was swapped to another T61. Everything was fine except that when I tried to use the Bluetooth Mouse, I could no longer connect it to the Thinkpad. The Bluetooth connection in the 'new' was already established and the green light was on. However, no matter how I tried to connect the mouse, it never appear in the list while icons of other Bluetooth devices were there. Can anyone advise me how I can reconnect the Bluetooth Mouse again ? Many thanks.
BBW

I am having the same exact problem with my Lenovo Thinkpad Bluetooth Mouse and Thinkpad x220 (Win 7, 64 bit). I reinstall the mouse, it doesn't work and then it vanishes from the list of devices. I have diabled "allow the bluetooth to turn of this device" in the manager.
I looked at my registry but I do not have a USB folder (I have several others that start with usb, like usbhub, usbcir, usbprint, usbstore.
HELP!
thank you!

N82 SIP clint cannot answer/hangup using bluetooth

Hi,
I have a N82 (V 20.0.062) and a NOKIA bluetooth headset BH-202. My problem is that I cannot bluetooth answer/hangup when I use the SIP client. In GSM mode bluetooth anser/hungup works fine. Is this something that can be fixed somehow?
All the best

I've noticed the same thing in the N95 (v21) and can only assume that there's some technical reason why it wasn't implemented.
Message Edited by grschinon on 11-Jun-2008 09:04 PM
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Cannot connect devices using Extend Network via Ethernet

Hi
I have been going nuts with this issue, and cannot seem to find any solutions. PLEASE HELP!
I have an Airport Extreme (pretty new and all up to date) connected to my modem. Everything works perfectly. The wi-fi is great, all devices can connect without any issues so nothing is wrong here. The Airport extreme is dishing out the IP addresses etc. The Airport extreme is in the lounge.
I purchased a new airport express yesterday. I put it in my study, far away from the lounge. I connected the airport extreme to the airport express using an ethernet cable. I plugged it in, and set it up to extend the wireless network via ethernet. I.e. it is set up in bridged mode and set up to 'create a wireless network' with identical name password etc. Everything is good. It reboots and the light is green. in the Airport utility everything shows up correctly.
Here is the problem., The second that any device (lets say iphone) moves from the lounge to the study, and tries to 'jump' to the stronger network provided by the express, it kills the ENTIRE network. The following happens:
1. The iphone loses wi-fi signal immediately. If I go into wi-fi settings, it sees my netwrok with FULL strength, but just remains in the 'spinning ball' state trying to connect. Seems to me that the express is unable to hand out an IP address or something.
2. If i open the airport utility on my Imac (in the study), the airport extreme has a yellow warning light and cannot be found via ethernet OR wi-fi. (The Imac is also Hard Wired from the Airport extreme in the lounge).
THe whole system requires a re-boot in order to work again.
If I re-boot the system, and leave a device near the airport express, it immediately receives signal, gets an IP address, and has an internet connection. Going back to the lounge causes no issues, it doesnt drop signal and still connects to the internet via the extreme. But as soon as I walk back into the study again - BOOM, everything drops.
I only purchased the new express because i was having EXACTLY the same issue with an older Airport extreme. No matter what I do, it just wont work via ethernet. I have tried all manner of settings. The ONLY setting that seems to work is to extend the wi-fi network. However, the rooms are too far apart, and this will require a third station in the middle, which i want to avoid (by the time the wifi network is extended across 3 decvices it is too slow).

Can I use airport express to make my pc pick up the wifi by plugging the pc into the ethernet socket?
Yes. But, it is the AirPort Express that would "pick up the wifi". Then, you would connect an Ethernet cable from the AirPort Express to the PC.
Configure the AirPort Express to "Join a wireless network" and click the option to "Enable Ethernet clients" during the setup to activate the Ethernet port on the device.
I would also plug a printer (currently connected to the pc) into the usb, so it can become a shared printer.
There is a good chance that your printer will work connected this way, but you won't really know until you try.

Cannot connect stereo using bluetooth

Similar Messages

Maybe you are looking for