Cannot connect synology nas thru airport

I am using synology NAS 213+
I cannot connect to my NAS thru internet but the capsule. That means I want to connact my NAS folder but go to the airport capsule data folder.
How to fix it, please help!

Hi, both protocols  are supported, get still an error with the following message " there is a problem with connecting to serve 192.168.0.193" the server does not excist or is not accessable. Check the servername or the ip address fromthe server, check network connection and try again.  In my opinion network is ok because otherwise i could not connect also via another device. thks

Similar Messages

  • Cannot connect synology via Mac book

    Hi  I am lost,
    Since I had an IP conflict within my network, I cannot connect my synology DS212 NAS anymore to my mac book pro. The strange thing is that I have no issue with connecting with eacht other device to the nas like windows laptop Iphone Ipad. I think there is still something wrong with IP addresses but when I run the synology assistant to find the NAS, the ip address is located but get's the message the connection failed
    Would be great if somebody has some tips or tricks.
    Thanks Jack

    Hi, both protocols  are supported, get still an error with the following message " there is a problem with connecting to serve 192.168.0.193" the server does not excist or is not accessable. Check the servername or the ip address fromthe server, check network connection and try again.  In my opinion network is ok because otherwise i could not connect also via another device. thks

  • ITunes cannot connect to remote speakers / Airport Express

    Hi Guys
    This is a quick post with a problem & solution.
    I've been searching for ages tonight to find a solution to my problem:
    'iTunes suddenly cannot connect to my Airport Express Speakers" and could not find one answer on here, only a mixture of replies all over the net.
    So, just incase some people are still looking for an answer:
    What I did...
    1. Go to System Preferences, Network.
    2. Click Advanced, on the TCP/IP tab, set "Configure IPv6" to Off.
    Open up Airport Utility, go to the Music tab, set a password (I did this just for the sake of seeing whether iTunes noticed that the Airport was now password protected, then atleast you know it's talking!)
    3. Open iTunes, go to preferences.
    4. Click on the devices tab, untick "Look for remote speakers connected with Airplay, Allow iTunes control from Remote Speakers, Forget All Remotes.
    5. Close iTunes
    6. Open iTunes, retick "Look for remote speakers connected with Airplay, Allow iTunes control from Remote Speakers, Forget All Remotes.
    7. Connect to remote speakers worked!

    thanks Simius,
    I just tried what you said to do, i had it in Automatic, but when I momenterely switched to manual the fields were all blank so I left them that way and turned on to automatic as you said and left it in auto, then tried to change itunes speaker to remote airplay and it didn t work.
    so i don t know what else to do, I read alot about this in the last few days the bug seems to be related to the newest itunes upgrade and with the presence of the IP6V not turned off completely.
    in the old system one could turn it off completely, now the off button is gone.
    there are work around using terminal, I tried that but it doens t recognize my commands, so it didn t work either.
    anybody has any idea?
    thansk a lot
    D.

  • Windows cannot connect to internet with airport

    I have a macbook with Windows via Bootcamp. I have DSL. My mac OS can access internet fine (wirelessly and ethernet). I can access internet through Windows if I connect directly through the modem (ethernet). If I connect ethernet through airport, I cannot connect. Of course I cannot connect wirelessly either. I would like to connect wirelessly. Any ideas?
    Thanks,
    Rich

    Richard,
    Some items to consider.
    First, can Windows see the wireless router? You can go under network settings in Windows and see if it "sees" the wireless access point. Or, you can log into the router and see if it sees Windows as a connected device.
    Do you have any security enabled on your router? If so, have you set up the security on Windows?
    Are you using DHCP on your router? If so, does Windows have a valid IP address?
    Also, have you made sure that the device driver for the Airport Card under Windows is current and working properly?
    Jeff

  • Cannot connect to receiver using AirPort Extreme due to password protection

    I have a new AirPort Extreme and Harman Kardon receiver. I am trying to connect the HK receiver to my home network, after entering in all the necessary info (IP, subnet mask etc) I still cannot connect to internet radio, Pandora etc. I called HK and they say it is because my home network is password protected. They recommend I disable to the password and keep it without a password. Is this the only option I have?

    There is no reason to do this if your HK receiver cannot connect using wireless, as appears to be the case here.  You must have misunderstood the HK support person, or they misunderstood you when you spoke with them.
    The information in the manual only talks about a wired Ethernet connection.  There is no information that I can find that would indicate that the HK Receiver will be able to connect to the wireless network using wireless.
    Unless you can provide another link that would indicate otherwise, you will need to plan to connect the HK receiver using a wired Ethernet cable, or use a pair of EOP adapters to send the signal over the AC wiring in your home.
    It would also be possible to use an AirPort Express to connect to the AirPort Extreme over wireless by locating the AirPort Express near the HK receiver and then in turn connecting a short Ethernet cable from the AirPort Express to the HK receiver.

  • Cannot connect to internet as Airport "has a self assigned IP address"?

    I suddenly cannot connet to wireless internet as the Airport has a "self assigned IP address" whatever that is. I have tried removing other wireless connectons but it makes no difference. I'm trying to use the wireless connection at the hotel I'm stying in..its working fine on this computer. Any suggestions ...PLEASE?
    Thanks

    Hmmm... well, not what I was hoping to find b/c that is not really a helpful answer, l.b, but thanks for joining in on the discussion. I too just experienced the same problem. Yesterday I was connected just fine, a little slow, but connecting just the same. I was able to do my banking, browsing & what have ya. Today I get up and have no internet connection and my computer says it Airport has self-assigned an ip address and I cannot connect to the Internet. I haven't done anything different and as I can tell, they haven't done anything different either. My iMAC will not connect, but this piece of poop del mini will as will my iphone4 and all three of my kids' ipod touches. Soooo.... anyone else have a solution b/c I am totally at a loss here. I really need my iMac to connect. Got things to do that I can't do on here.

  • Blu Ray player cannot connect to Gateway with airport extreme

    I have a Samsung bluray player which is plugged into an airport express. The blu ray cannot find the gateway and cannot connect to the internet. The same airport express is also used as airtunes and works just fine on the network. How do I find the correct gateway information to enter?

    Temporarily, turn off the wireless on a laptop and connect the laptop to the AirPort Express using an Ethernet cable. Can the laptop get an Internet connection?
    If yes, the BluRay player should auto configure itself the same way to connect.
    If no, the Express is not delivering an Internet connection at the Ethernet port and more troubleshooting will be required before you can connect the BluRay player.

  • HP Laptop not able to connect to internet thru airport

    I just got a new Airport Express for my Mac... I cannot get my roomates HP Laptop to connect to the internet... It seems like it has found the network I made, and connects, but won't connect to the internet... I've tried everything I can think of... and tried help routes (GeekSquad, Apple) and no one can seem to help... Apple told me to look on here... Any else have this problem know what to do??? Help!
    Thanks!

    Suggest that you post over in the AirPort for Windows Forum since the PC guys hang out over there.
    I'm sure it would help if you could tell them what operating system the HP was running...Vista, Windows 7, etc.
    And, the first thing they will likely ask is whether the HP can connect if you have no security set on the AirPort Express. So, you might want to try that and post on your results.
    AirPort Utility > Manual Setup
    Click the Wireless tab below the row of icons
    Set Security temporarily to None and see if the HP can connect that way.
    If it can, then there is a security compatibility issue on the HP that will need some figuring out.

  • Cannot connect to drive in airport extreme

    by mistake I click on disconnect on the airport capsule.. and the button Connect As...  is not working.
    cannot access my files.

    Restart your Mac.

  • "Cannot connect to server" after Airport upgrade

    On Monday evening I accepted the updates to my Mac OSX
    10.4.5 system and downloaded the upgrades. It took it to
    10.4.6 and it also contained an Airport upgrade. I
    rebooted and used the Airport admin utility to refresh
    the code in my Airport. Ever since then I cannot access
    the Epson Stylus 740 through my Airport. I moved it's
    cable to go directly to my G4 desktop and it works fine.
    How do I get it working again on my Airport so my wireless
    iBook can print to it?
    RSVP Thanks
    Dan

    I was just out searching for a fix to my Epson 740 printer problem and
    ran across an item at http://www.macintouch.com/readerreports/macosx1041/topic3047.html. It sounds strange but I followed the
    instructions and now my printer works fine through my updated Airport.
    Reset procedure for Epson 740 solves printer error Problem
    When trying to use the Epson 740 printer you get a message that says “Printer not responding. Check your connections.”
    Resolution
    1. Disconnect the USB cable from the printer.
    2. Turn off the printer.
    3. While holding down the ink and paper buttons at the same time, turn the printer on.
    4. Release the ink and paper buttons and press the paper button once.
    5. Plug the printer’s USB cable back in. The printer should now work.
    Dan

  • I cannot connect my PS3 to AirPort Express

    When I try to scan for networks on my PS3, the Airport Express network does not appear. I successfully set up my AirPort Express to piggyback off my Airport Extreme. The Airport Express is 3 ft away from my PS3 and is working fine( I checked the signal on my Mac). I check for the networks by scanning them on my PS3. Any ideas?

    Hi,
    I have a Macbook Pro running latest updates.
    Just bought an Airport Extreme in place of old
    Airport Express, and now I cannot get my PS3 or
    Xbox360 to connect to the network wirelessly like I
    had them before.
    Tried lots of variations on settings but nothing
    works!?
    Any ideas would be greatly appreciated!?
    I have a PS3 with the latest firmware (1.8) and and AEBSn with the latest firmware 7.1.1. I use WPA Personal. Works great.

  • Connecting to wireless thru airport express (joined home network)

    I have a wireless router in my bedroom, which is the source of internet connection.
    I use the airport express to join this connection, and this airport express is now plugged in my living room.
    the name of the wireless connection is "my_name room".
    the name of the airport express is "my_name airport express".
    i cannot locate the "my_name express" on my devices, including macbook pro, and iphone 5.
    i can only locate "my_name room".
    is this normal for using airport express as an extension of a network ?
    thanks in advance.

    What are the benefits of extending a wireless network then ?
    Unfortunately, you are not extending your wireless network since the Express is not compatible with your router for that purpose. 
    The benefits to extending a wireless network...assuming that your Express is working with a compatible wireless router.....are the same as "joining" with the added plus that the Express is also providing more wireless signal, so the wireless signal strength will be provided over a greater area.
    Another question is, the only purposes of joining a wireless network are for AirTunes, and remote printing ?
    As I mentioned above, the Express can be used for AirTunes or a remote printer when it is configured to "join" a network. It can only "extend" a wireless network when it is used with another Apple product. In that case, the Express is configured to "extend a wireless network".

  • Cannot connect to internet through AirPort in Costa Rica - HELP!

    Hello,
    I have been traveling Costa Rica for the past few days, and have had no problem connecting to WIFI across the country, but, tonight, I am not able to connect. I clicked on my AirPort icon > Open Network Preferences. The Status reads "On", BUT under the status is a message that says:
    "AirPort has the self-assigned IP address 169... and will not be able to connect to the internet."
    Reading through the posts here, I have tried several fixes...
    - Renew DHCP Lease
    - Repair permissions
    ...And still no luck.
    I have no access to the router itself, because I am staying at a bed and breakfast. Anyone have any other ideas?
    I really appreciate your help in advance. I love this community!
    Sincerely,
    Nathan

    Hey,
    This is obviously seems to be a DHCP problem, do you have any other wireless devices with you like an iPhone, iPad or just any wireless capable device ? If yes, try to connect through it and see if it will obtain a valid IP address successfully, if it didn't, then surely it's a router issue that it isn't able to distribute IP addresses, if you don't have a second device, can you see any ethernet connections in the wall ? another solution is to contact the IT person at your location and ask him if you should configure your network settings manually and if so, what would be the settings. Sometimes something as simple as restarting the router fixes similar issues

  • New to Windows RC 7 - ?connect to printer thru Airport Extreme

    Okay - been a mac person forever, but have to access Windows info occasionally.
    I installed RC 7 on an internal drive (directly, not via BootCamp). I am trying to set up the shared printer (HPO LaserJet 1300)I have connected via USB to my wired Airport Extreme. I was wondering if someone could guide me through the Windows RC connection to printer with this configuration for dummies?
    Thanks!

    The first thing I would suggest is to download and install Bonjour for Windows. Although the current version of Bonjour is for Window XP or Vista, it should work with Windows 7. The link provides both a 32- & 64-bit version to handle just about any variation of Windows.
    Then check out this iFelix article: Installing Bonjour for Windows on a Vista Business Edition PC. Again, its written for Vista, but you may be able to transpose the instructions to make fit for Windows 7.

  • Pc cannot connect to internet via airport

    Hi
    I have an older Airport Extreme base station (round pyramid style) that is fine with my Mac (MacBook Air, iMac, iPad-2, iPhone 4+) and other wifi devices. 
    However, we also have various PC laptops (needed for work) that can connect to the Airport base station (PC= green line from pc to base, red line crossed through to internet Windows graphic) but NOT to the web (?)
    We have high speed DSL, and a modem plugged directly into the base station.
    How can I set Airport up or the PC laptops, so that the PC laptops can have access to the web and everything stays the same for all of my other stuff?
    Very behind in my work...
    boulevardier

    Hi,
    I believe you have the problem that I was able to correct last weekend on my son's pc laptop by updating the atheros wireless adapter drivers.  Here are two simple options to test if you need to get an updated driver for the pc wireless adapter.  The first is to just connect the laptop to the Airport Extreme with a network cable.  If that is not an option, enable the guest network with no security on the Airport Extreme and connect the pc laptop to the guest network.  If either method works, the wireless security method is the problem and a new driver was the solution.
    -G

Maybe you are looking for