Cannot connect synology via Mac book

Hi  I am lost,
Since I had an IP conflict within my network, I cannot connect my synology DS212 NAS anymore to my mac book pro. The strange thing is that I have no issue with connecting with eacht other device to the nas like windows laptop Iphone Ipad. I think there is still something wrong with IP addresses but when I run the synology assistant to find the NAS, the ip address is located but get's the message the connection failed
Would be great if somebody has some tips or tricks.
Thanks Jack

Hi, both protocols  are supported, get still an error with the following message " there is a problem with connecting to serve 192.168.0.193" the server does not excist or is not accessable. Check the servername or the ip address fromthe server, check network connection and try again.  In my opinion network is ok because otherwise i could not connect also via another device. thks

Similar Messages

  • Face Time cannot connect on my MAC Book Pro

    My Face Time cannot connect, but it used to work well before.
    My friend have incoming call, when I press accept, it says connecting, after a minute, it shows failure.
    I cannot dial out with Face Time too. All failure.
    Anybody can help?

    Hi there lauhohioi,
    You may find the troubleshooting steps in the article below helpful.
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    -Griff W. 

  • Downloaded ios7 on my iphone 4s and cannot connect to my mac book

    I have a mac book that is a few years old. Im on mac os x 10.5.8. I cannot sync with Itunes and when I try to download a newer verision of itunes it tells me that I can't download until I get 10.6.1. So what version is that and is anyone solving thier issue after they update thier software?
    Thanks,

    You've posted to the iTunes Match forum which your question is not related to. However, see this post for more information on upgrading your version of OS X: Re: Updating Version 10.6.8 to OS X Mountain Lion to get in the Cloud?

  • The magic mouse still can't connect to my mac book

    i change the new batteries with my magic mouse
    it cannot connect to my mac book with lion
    i can see the green light but only for few seconds
    reboot no work
    i have the pad& keyborad also, they all work, only the mouse

    Sorry for not explaining myself better, I can easily connect to the windows machine from the Mac using the IP address. I can't connect to the Mac from the PC and I have tried using the IP address.

  • HT201177 Why won't my TV connect to my Mac Book Pro via HDMI thunderbolt after an upgrade to OS X Yosemite version 10.10.1?

    Why won't my TV connect to my Mac Book Pro via HDMI thunderbolt after an upgrade to OS X Yosemite version 10.10.1?

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

  • Connection Iphone 4s Mac book Air

    Hello!
    Le wifii est cassé (grisé) sur mon iphone 4s
    Savez vous comment je pourrai me connecter au wifii via mac book air? (cable/bluetooth/airport?)
    Merci!!
    alex

    Pairing those devices is not supported except for tethering.
    Barry

  • How can i connect my 2008 mac book pro to a tv?

    how can i connect my 2008 mac book pro to a tv?

    The Mini-DVI to DVI adapter is designed for the iMac (Intel Core Duo), MacBook, and 12-inch PowerBook G4 — allowing you to connect to an external DVI monitor. It can also be used in combination with the Apple DVI to ADC adapter to support older Apple flat panel Studio or Cinema Displays.

  • I have my HP OfficeJet Pro 8500 A connected to my Mac Book Pro on a Wireless network. It works and

    I have my Hp Officejet Pro 8500 A connected to my MAc Book Pro which is running Lion OS on a wireless network.  It works just fine and prints and everything.  The problem is a "HP Utility" window that pops up on my screen and says it is "connecting to device" and lists my printer.  It just runs and runs and the entire thing is gray - meaning I can't close it, cancel it, or anything. When you try to click on it, the arrow becomes the color wheel of death.   It is driving me crazy.  I have gone through settings, I have downloaded the latest drivers, I have looked in utilities, I have opened the printer folder and can't find where this thing is coming from or how to turn it off.  Please help.  And yes I have turned offf the computer and rebooted.  

    If you are using Snow Leopard or Lion and have HP software for pre-Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the HP software on your Mac before you upgraded - even if you did a standard uninstall of the old software or installed new software over the top of it) you must uninstall the software using the 'scrubber' option:
    Go to Applications/Hewlett Packard/ click on HP Uninstaller
    Click on Continue
    Highlight your device on the left pane
    Press and hold Control + Alt + Cmd keys on the keyboard simultaneously while you click on Uninstall <<<< This IS the Scrubber Option, there is no button labeled "Scrubber"
    There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
    Click Continue and let it finish
    Restart your Mac
    Download and install this: http://support.apple.com/kb/DL907
    Now reset the printing system:
    - Sys Prefs, Print & Fax
    - Right (control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
    If you want more features, you can download and install the Full Featured software from the "Support & Drivers" button at the top of this page, otherwise, basic printing and scanning will work without it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?

    I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?
    The firewire port reads the dj software and I can hear music playing through the sound card when I plug my headphones into it but there is no signal to the hardware (my dj mixer).
    I have reset the firewire by turning off my mac book pro for a few hours and can see the sound card device in the fire wire section after clicking on the apple icon on the top left corner of my mac.
    My dj mixer works on another mac computer with the same soundcard and different firewire cable.
    Hope someone can help
    Thanks
    Wayne

    kmiddlet88,
    yes, it could be due to nearly anything listed in your kernel extensions, startup items, launch daemons, launch agents, or user items above. Please check all of your installed third-party software to make sure that the versions which are installed on your MacBook Pro are compatible with Mavericks; uninstall every software package which isn’t Mavericks-compatible. After you’ve done that, boot into Safe mode, and see if you still get the beach ball of doom there. If it doesn’t appear there, restart normally and see if it appears then.

  • I cannot boot up my Mac book and all I get is a long beep

    I cannot boot up my Mac book and all I get is a long beep
    Have tried checking the keypad and no luck
    Is this a logic board issue or is it something else?

    My daughters Mac crashed mid assignment and after hours for phone support. So was looking to see if there was anything we could do here. Your advice is correct but the issue was "long beeps". Which are generally a serious issue and not one that we are going to be able to deal with. Like the icon .... and do appreciate the fact that you were happy to help. cheers

  • I keep getting this error message and cannot back up my Mac Book Air to MacBook Air to Time Machine; "Air.sparsebundle" is already in use" how do I correct this?

    I keep getting this error message and cannot back up my Mac Book Air to Time Machine; "Air.sparsebundle” is already in use" how do I correct this?

    Restart the Time Capsule. Launch AirPort Utility and check for a firmware update.

  • Cannot use facetime with mac book pro since a few days, only via my iphone

    For a couple of days now, I cannot make or receive facetime calls on my Mac Book Pro, I can only receive them via my Iphone5.
    It always worked fine, I didn't cgange anything, any idea what the problem could be?

    Delete the E-mail and add it again. It's Work!!!

  • Why won't my iPhone 4 connect with my Mac Book Pro?

    My Mac Book can see my iPhone, but cannot connect to it.  Also, my bluebud x Jaybirds work fine with my iPhone 4, but are not seen by my Mac Book.

    Well snozdop as you can see, I am new around here.  In most online forums you can "bump" an old thread and get new responses, rather than making a whole new thread about the same question.
    So I was hoping by pointing out the fact that Panicazi (who seems to have to deleted his profile, maybe because of people like you) said that "This solved my question" when in fact it didn't, because you asked...
    "For what purpose are you trying to connect the iPhone to the Mac via Bluetooth?"
    and then said
    "Apple have never said "why" their implementation of Bluetooth is the way it is.
    However, there are over 20 different Bluetooth profiles - not every device supports, or needs to support every profile. Some Bluetooth profiles would be useless on some Bluetooth devices.
    File transfers over Bluetooth are slow. For the multi-gigabytes media files an iPhone it would be impractical for file transfers. USB 2 is many times faster."
    didn't answer why his "...Mac Book can see my iPhone, but cannot connect to it..."  or the rest of his question; someone might respond with an answer, rather than a rude comment.
    -TH
    <Edited By Host>

  • How do I connect my 2010 Mac Book Pro to two HDMI Monitors?

    Hi All,
    I currently have a 2010 Mac Book Pro (Non Retina) which has only one MiniDisplay Port. I am trying to connect it to two HDMI Monitors. How do I do this? I originally was going to buy a MiniDisplay Port to HDMI Adapter and a HDMI Splitter, but won't that show the exact same thing on both displays? Thanks.

    If you can connect each computer to the Internet at the same time without swapping cables, you have all the infrastructure in place for File Sharing.
    On your Mac,
    System Preferences > Sharing > File Sharing can be used to "Share" [read: "make available to others"]
    OS X Mountain Lion: Set up a Windows computer to share files with Mac users
    If you decide to connect an external Hard drive:
    The PC does not believe there are any other Operating Systems, so it cannot read Mac OS X files.
    The Mac can read and write FAT and exFat, and can Read but not write NTFS.

  • Cannot connect between a Mac Pro (late 2013) and a MBP and vice versa

    Cannot connect to Macbook Pro from Mac Pro late 2013. I have tried via ethernet and wifi. I can screen share either way. I have tried to connect to other MBP's on the same network with no luck. I try and connect as a registered user, as I usually do, with no luck. When I enter the Username and then Password the box vibrates as if the details are incorrect, they are definitely correct however.
    I have no firewall on. Both devices are using the most recent OS.
    Thanks in advance
    Jeff

    Hi Grant, Here is the Console system log. Tried to connect to Macbook Pro at 15:46:30
    Mar 22 15:44:28 Jeffs-Mac-Pro com.apple.xpc.launchd[1] (com.apple.preference.datetime.remoteservice[744]): Service exited due to signal: Killed: 9
    Mar 22 15:44:38 Jeffs-Mac-Pro kernel[0]: hfs: mounted Time Machine Backups on device disk2s2
    Mar 22 15:44:40 Jeffs-Mac-Pro com.apple.backupd[736]: Disk image /Volumes/Data/Jeff’s Mac Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
    Mar 22 15:44:40 Jeffs-Mac-Pro mds[35]: (Volume.Error:880) Root store set to FSOnly with matching create! (loaded:1)
    Mar 22 15:44:41 Jeffs-Mac-Pro com.apple.backupd[736]: Backing up to /dev/disk2s2: /Volumes/Time Machine Backups/Backups.backupdb
    Mar 22 15:45:27 Jeffs-Mac-Pro com.apple.backupd[736]: Will copy (72.8 MB) from Jeff Mac Pro HD
    Mar 22 15:45:27 Jeffs-Mac-Pro com.apple.backupd[736]: Found 973 files (72.8 MB) needing backup
    Mar 22 15:45:27 Jeffs-Mac-Pro com.apple.backupd[736]: 1.56 GB required (including padding), 232.28 GB available
    Mar 22 15:45:48 Jeffs-Mac-Pro NetAuthSysAgent[773]: NAHSelectionAcquireCredential complete: iakerb A88A5E19-89A1-8FEF-EE42-8F065FC94669 - ***@mac.com: GSSCred: 0x7ffa296262f0 <MC: iakerb com.apple.idms.appleid.prd.4f7466316e4d737570647351515953457261382b32773d3d@WEL LKNOWN:COM.APPLE.LKDC>
    Mar 22 15:46:41 Jeffs-Mac-Pro NetAuthSysAgent[773]: NAHSelectionAcquireCredential complete: iakerb A88A5E19-89A1-8FEF-EE42-8F065FC94669 - ***@mac.com: GSSCred: 0x7ffa29432780 <MC: iakerb com.apple.idms.appleid.prd.4f7466316e4d737570647351515953457261382b32773d3d@WEL LKNOWN:COM.APPLE.LKDC>
    Mar 22 15:47:04 Jeffs-Mac-Pro Console[781]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
    Mar 22 15:47:17 Jeffs-Mac-Pro com.apple.xpc.launchd[1] (com.apple.PubSub.Agent[784]): Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.pubsub.ipc
    Mar 22 15:47:17 Jeffs-Mac-Pro com.apple.xpc.launchd[1] (com.apple.PubSub.Agent[784]): Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.pubsub.notification
    Mar 22 15:47:36 Jeffs-Mac-Pro com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
    Mar 22 15:47:56 Jeffs-Mac-Pro Dock[286]: void CGSShmemReleaseMappedMemory(CGSShmemID): failed to find shmem ID 787.

Maybe you are looking for