Cannot connect to 1 Ghz G4 Flatpanel on home intranet or from INTERNET.

Here is the set up:
1) Powerbook G4 Aluminum running Leopard 10.5.1
2) White iMac Dual Corp Intel running Leopard 10.5.1
3) 1 Ghz Flatpanel G4 iMac running Leopard 10.5.1
Items 1 thru 3 are HOME networked using an ACTIONTEC DSL modem which distributes intranet addresses WIRELESSLY to all computers running Airport band B/G. DSL service is per Qwest.
4) White iMac Dual Corp Intel running Leopard 10.5.1 wireless on Office network behind firewall with appropriate ports opened and directed to target computer at home.
PROBLEMATIC BEHAVIOR.
Prior to upgrade from Tiger, I could remote in from the office using both my desktop, or my laptop which I never have online at the same time since they share the same fixed internal IP address. This could view and control the one targeted computer behind the DSL Modem/wireless router at home. When at home, with the laptop or using the intel iMac, I could use ARD to monitor/view and control any computer in the home intranet.
Once upgraded to Leopard, ARD still works from the office into the home for the intel dual core desktop machine. However, I cannot connect to the flat panel G4 desktop AT ALL. It is visible on my list of computers and shows available (or sometimes Screen sharing avialable). It will not allow me to view with screen sharing over iChat either.
Solutions tried: just about everything I can find on this website / discussion list. Nothing works to bring this flat panel G4 online. And, other than remoting in when away from home to help my wife with her desktop, the G4, used by my teen boys, is the machine I really need to surveil.
Does any guru out there think that an uninstall reinstall of ARD files would help?
I need this solved definitively.
Thanks

PS: Yes, ports are open at home and at work. From inside the intranet at home I can see the G4 domed base mac but not connect. If I reconfigure the ports to target the computer from the internet it demonstrates the same behavior: I can see it listed as available but msg: Cannot connect is returned.
Sorry if that was unclear to begin with.

Similar Messages

When I try to download a song onto my iPad from iTunes Match, my iPad says "Cannot connect to the iTunes Store" even though I have a perfect Internet connection.

When I try to download a song onto my iPad from iTunes Match, my iPad says "Cannot connect to the iTunes Store" even though I have a perfect Internet connection.

Try a power cycled of the iPad.

RDC for MAC cannot connect to TS server with error message "You were disconnected from the Windows-based computer because of problems during the licensing protocol".

the mac clients are running RDC for mac version 2.1 and they cannot connect to Windows 2008 R2 TS server. They get the error "You were disconnected from the Windows-based computer because of problems during the licensing protocol".
really appreciated if someone have a fix for this.
thanks,
/dan

Hey,
Any proposed answer for this ?
I face the same problem and my environment
and I've got same results as dle2k
1. TS lic mode is set to per user confirmed it works for windows clients.
2. the TS server's system log logged error "The Terminal Server security layer detected an error in the protocol stream and has disconnected the client".
3. the reports shows per user cal has been issued to users. no temp per device cal has been issued.
4. yes, CoRD works .
5. we tried version 2.1.1 of the Mac RD Client but it also does not work.

I cannot connect to apps such as Pandora and App store. The internet does work though.

I cannot connect to Pandora and some other apps like app store. My internet is working and I can get on the internet from my ipod. What could be wrong?

If you are getting can't connect to iTunes then:
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight
Can't connect to the iTunes Store
otherwise what ahppens when you try?

HT1689 my ipod cannot connect to itunes store, nor will it accept downloaded apps from mac or pc. Help !!!

My daughters ipod touch cannot connect to i tunes store, nor will it take downloaded apps from pc or Mac, have tried restore etc, nothing seems to work, even though it has no problems going online using Safari, it will not connect or download apps from i tunes store. Any advice appreciated.

You need to update the iOS. You need iOS 2 or later for apps. See the following to get the last update for the 1G iPod.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad

WRT610N : laptops cannot connect to 5 Ghz wireless network !

Hello,
I have a Linksys WRT610N (hardware v1) router, and i configured the wireless settings for the 5 Ghz and the 2.4 Ghz
wireless network, but the problem is that my laptops (wifi n compatible) only detect the 2.4 Ghz network, but NOT the
5 Ghz network. I have no clue what the problem might be :-(
These are my configurations :
Settings for wireless network (5 Ghz) :
network mode : only wireless-n
network name (SSID) : WRT610WiFi-N
channel width : auto (20 or 40 Mhz)
wide channel : auto (DFS)
standard channel : auto (DFS)
SSID broadcast : enabled
Settings for wireless network (2.4 Ghz) :
network mode : only wireless-g
network name (SSID) : WRT610WiFi-G
channel width : only 20 Mhz
wide channel : auto
standard channel : auto
SSID broadcast : enabled
Security Mode on both is "WPA2-personal", and encryption is "WPA-TKIP or WPA2-AES"
But my laptops only see the WRT610WiFi-G, and not the other one :-(
I am somewhat disappointed currently, as you can understand, but hopefully someone here can
provide me with a solution for this problem...
best regards,
Chris.
Solved!
Go to Solution.

Correct. Should be a/b/g/n

Cannot connect to Wi-fi outside of my home counrty.

I cannot use my Macbooks’ airport to connect to Wi-fi within Japan. In the U.S. I never had problems connecting, using multiple locations across multiple states. However, in Japan at multiple locations (Starbucks, local cafe, my own room) it always fails. Airport recognizes access points, says it is connected, but the web page never loads. I know that all of these locations are working as I also have an iPad and it has no trouble recognizing the access points and connecting. If I insert my ethernet cable, i have no trouble using the internet on my macbook. Can anyone help me to figure this out. As I am in Japan, I cannot exactly walk into the nearest Apple store and ask for help.(My Japanese being only on the most basic of levels) Nor, can I call America's apple support as I do not have a phone that can call outside of the country.
About my macbook: Mac OS X Version 10.6.8
About my Airport & the Wireless Router I am 'supposidly' connected to:
Software Versions:
Menu Extra:          6.2.2 (622.2)
configd plug-in:          6.2.5 (625.6)
System Profiler:          6.0.1 (601.1)
Network Preference:          6.2.2 (622.2)
AirPort Utility:          5.6.1 (561.3)
IO80211 Family:          3.2 (320.1)
Interfaces:
en1:
Card Type:          AirPort Extreme (0x14E4, 0x93)
Firmware Version:          Broadcom BCM43xx 1.0 (5.10.131.42.4)
Locale:          FCC
Country Code:          JP
Supported PHY Modes:          802.11 a/b/g/n
Supported Channels:          1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
Wake On Wireless:          Supported
Status:          Connected
Current Network Information:
106F3F73A72A:
PHY Mode:          802.11n
BSSID:          10:6f:3f:73:a7:2a
Channel:          1
Country Code:          JP
Network Type:          Infrastructure
Security:          WPA2 Personal
Signal / Noise:          -28 dBm / -92 dBm
Transmit Rate:          52
MCS Index:          11

If your iPad connects to other Wi-Fi networks ok then the problem definitely lies in your Wi-Fi network. Try the suggestions given by Diavonex. If they do not work check to see if there is a firmware update for your Wi-Fi router in your home.

WRT54GS cannot connect to windows media center with xbox360/can stream media from PC to x-box

- running win XP MCE and set up xb 360 on wireless router WRT54GS updated from V1 to V 4.71.4 . PC wired to router and DSL signal goes by wire from wall to modem, router, PC. I can stream media through xbox but not make the WMC connection. I still get the"xbox360 not found on network". I have gone through x-box set up page and installed the setup files. I excluded windows firewall as a problem. I can connect to Xbox live and xbox live/media tests on the xbox run w/o any failures.

Thanks for your reply Yes, I can connect to Xbox live from x box w/o diff. It seems that the xbox can "see" the PC but the PC cannot "see" the xbox. My PC is XP not Vista.

I have a MacBook and cannot connect to App Store. I have no problem with the internet connection. I want to be able to buy the apps that are available for my computer. The date, time and location are all correct - all the suggestions have failed

I have a MacBook - I am unable to connect to App Store - I have no problems using the internet to connect to anything else. I have checked out all the suggestions - Apple Preference and time, date, location etc. they are all correct. I cannot think what else I should do. Any suggestions please Cynthiafromgrayshott.

If you don't see any messages, not have anti-malware running or the Firewall on, try installing the Mac OS X 10.6.8 Update Combo
It's ok to do this even though you are already running v10.6.8 (according to your profile).
Restart your Mac after the combo in installed, try the App Store.
Also... if you have an app called Little Snitch installed, that can prevent a connection to the App Store.

I cannot connect to the ITunes store or Amazon cloud due to "No internet connection" which I obviously have

Every time I attempt to connect to the Itunes store or to the Amazon cloud I am given an error message that states I do not have an internet connection which is not true because I do have an internet connection.

reset your hosts file
* http://support.microsoft.com/kb/972034

My MacPro OS 10.6.8 cannot connect to my wireless HP Officejet 6500APlus printer. It sees internet modem. Hp went thru all it's procedures, including new uploaded Driver. Utilitie tool found no issues. Now what?

I just switched internet provider and ran into this: My MacPro OS 10.6.8, recognizes the modem, as does my HP Officejet 6500A Plus wireless printer, but the computer doesn't "see" the printer. HP tried all its procedures, Mac Utility Disk repair was used without resolving the blind spot. Can you help? Now what?

If you just changed Routers, it is quite possible the Printer is holding onto its old IP Address, which is no longer in the smae subnet and not visible from the rest of your equipment.
You need to know what the IP Address of the printer is. Some HP printers will show you on a front panel, some can print it on a test page.

Cannot bring up saved page, complete or HTML only, if disconnected from internet: "Server not found"

I right clicked, chose "Save Page As...", chose both HTML Only and Complete on 2 different tries. When I tried to bring the page back up when disconnected from the internet network, I receive the "Server Not Found" error page. I shouldn't have to be connected to bring a saved page back up. I've not had this happen before, and it has only happened w/ a particular page, but one which is perfectly normal. What might be the explanation and solution? Thank you.
Jeff Bowrs

I would start with seeing if the Web Browser on the G4 can get to 192.168.0.1 which should be the web server (Set Up pages) on the router.
If that does not work I would double check the cable (Use another).
If you can I would connect two computers together and see if the Self Assigned IP (169.xxx.xxx.xxx) works to eliminate the Ethernet Card.
You have no connection to the Internet.
You need to sort out where it is breaking down.
As other devices seem to get on the 'Net then it would appear to be:-
The Ethernet Port on the routing device.
The Cable itself.
The Card or Port on the Mac
10:56 PM Wednesday; August 25, 2010

WLSTException: Cannot connect to Node Manager

Hello,
I am trying to connect to my nodemanager via the WLST rather than the service and get the following error. (I am using custom keystores instead of Demo)
wls:/offline> nmConnect('weblogic','1234',' xx.xx.xx ','5556','base_domain',':/Oracle/Middleware/user_projects/domains/base_domain','ssl')
Connecting to Node Manager ...
<Oct 17, 2012 4:52:38 PM PDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certifica
te parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. -For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Un
supported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupp
orted OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Warning> <Security> <BEA-090542> <Certificate chain received from xx.xx.xx - yy.yy.yy.yy was not trusted causing SSL handshake failure. Check the certificate chain to determine if it should be trusted or not. If it should be trusted, then update the client trusted CA configurati
on to trust the CA certificate that signed the peer certificate chain. If you are connecting to a WLS server that is using demo certificates (the default WLS se
rver behavior), and you want this client to trust demo certificates, then specify -Dweblogic.security.TrustKeyStore=DemoTrust on the command line for this client.>
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 123, in nmConnect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing nmConnect : Cannot connect to Node Manager. : [Security:090542]Certificate chain received from xx.xx.xx - yy.yy.yy.yy was not trusted causing SSL handshake failure. Check the certificate chain to determine if it should be trusted or not. If it should be trusted, then update the client trusted CA configuration to trust the CA certificate that signed the peer certificate chain. If you are connecting to a WLS server that is using demo certificates (the default WLS server behavior), and you want this client to trust demo certificates, then specify -Dweblogic.security.TrustKeyStore= DemoTrust on the command line for this client.
Thanks..

Yes Node Manager is running fine. I was able to overcome the above error, by using the following parameters while running Weblogic.WLST:
"java -Dweblogic.security.TrustKeyStore=CustomTrust -Dweblogic.security.CustomTrustKeyStoreFileName=<name>.jks weblogic.WLST"
Thanks,

Cannot connect to internet via Vivaz in Cambodia with CellCard(Mobitel)

I cannot connect my Vivaz phone as modem with my laptop to the internet via a telecom company is called Mobitel (Cell Card). Any one can help?

http://talk.sonyericsson.com/message/7095#7095 Link to related thread about using the Vivaz as a modem.PC suite has been replaced by PC companion now.

HT1222 I get a "cannot connect to iTunes store"when I try to retrieve updates on my iPad 2.

I get a "Cannot connect to iTunes Store"whenI try to update my Apps from the Apps icon. I am more than totally clueless. Help please.

Try rebooting your router first. Unplug it for 30 seconds and then plug it in again. Reboot your iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If you still can't connect to the iTunes store, look here for help.
Can't connect to the iTunes Store.
http://support.apple.com/kb/TS1368
And look here for more advanced troubleshooting help.
iTunes: Advanced iTunes Store troubleshooting.
http://support.apple.com/kb/TS3297

Cannot connect to 1 Ghz G4 Flatpanel on home intranet or from INTERNET.

Similar Messages

Maybe you are looking for