Cannot connect to 10g instance from 11g client (ORA-12638)

Hi,
I don't know why I have problems when I connect from a 11g client to a 10g server. I get the error ORA-12638.
However, it works fine doing the same with a 10g client.
Can anybody tell me how to avoid this problem without having to install the 10g client ?
Thanks in advance.
Regards.

Hi, user7409638,
To understand the problem, I advice you to enable tracing and have a look at it.
As you may know, ORA-12638 is the problem with the authentication service.
It was just unable to get your credentials.
If you want me finally get the solution, please report it at my system http://1dayotn.blogspot.de/p/question-me_7.html
If you have any questions, ask.
Kirill Babeyev

Similar Messages

Cannot connect to iChat Server from Leopard Client

I just installed Leopard Server fresh and did all of the software updates. I let Directory Utility configure my Leopard client machine to setup all of the accounts. When I try to connect with iChat, I get the following prompt:
*Please type your Kerberos password for patrick@LKDC:SHA1.48E73...0D0.*
I enter my password on the server, and I then get:
*Kerberos Login Failed:*
Cannot resolve network address for KDC in requested realm.
My co-worker has a similar problem, but it instead asks him to type in the Kerberos password for "[email protected]". It also fails for him.
Keep in mind this is a freshly-installed Leopard Server set for basic usage. I'm literally shocked that it doesn't *just work*. I'm even more shocked that nothing I seem to try actually has any result on fixing it.
What am I doing wrong? (Or rather, what is Leopard Server doing wrong, since all I did was follow the instructions to install this thing.)
Thanks,
Patrick

Yes, the problem turned out to be that when I initially installed Leopard, the IP address I was using didn't have a reverse DNS entry. Leopard should really provide a WARNING when this is the case, as it causes so many problems across the board, and I've read so many other users having other problems because their DNS was not set up properly. Since there is no easy way to remedy this once it's installed, it's even more pertinent that an administrator be notified at the time of installation that this is the case. I fixed my DNS issue and reinstalled Leopard Server, and that solved the problem. (And yes, I will file a bug report with Apple.)

Cannot login via ssh/sftp from certain clients

Hi Guys,
Strange issue here. I have a machine running 10.7.4 that I want to be able to access via sftp/ssh.
I can login into the machine in terminal using either ssh or sftp.
I cannot however login to the machine from finder via sftp. I am just told the username/password is wrong.
Equally I cannot login to the machine from certain clients on my android phone (the main reason I need sftp)
I can however login from cyberduck on the other machines I have, and from some clients on my android phone.
When a mac is denied access it gives authentication failed as the reason, when a android client is denied access it gives network communtaction issues as its reason for failing, not authentication.
From memory these issues started when smb broke for me in 10.7.3.
Can any one shed any light on this?
Cheers

bump

I cannot connect to Nokia Account from my Lumia 92...

I cannot connect to Nokia Account from my lumia 920. I have done a reset which allowed account details set up but although I can get to the sign in page that is as far as it goes. I can however connect via the website from this phone. does anyone have a simple solution.

Me too facing same problem.Can anyone plz help me.

HT3529 cannot connect to itunes store from iphone error message

cannot connect to itunes store from iphone error message

More than likely its your router. You need to make sure that the router's firewall, if enabled(most are by default), permits connection to these domains as trusted:
* itunes.apple.com
* ax.itunes.apple.com
* albert.apple.com
* gs.apple.com
This article may prove helpful in identifying the problem:
http://support.apple.com/kb/HT3501

Cannot connect to itunes store from iphone4

I cannot connect to itunes store from my iphone 4. v4.2.10. It use to work and now I keep getting this error, any suggestions.

You don't have another device like a mac book or a mac sitting close to it while you do this do you? When I try to use the iPad next to a Powerbook 800 while both have to connect to the wireless in my house, usually the iPad loses and gets incomplete connections. I have to move about 10 feet away from the other device.

Cannot connect to Oracle 8 from JDeveloper 10g

Hi everybody,
I have a connection problem to my local database Oracle 8.0.5, when I try to create a connection from JDeveloper J2EE Developer Preview Edition Version 10.1.3.0.2.223 using Oracle JDBC, when i test the connection.. i have the following messages:
ORA-00604: error occurred at recursive SQL level 1
ORA-02248: invalid option for ALTER SESSION
And when I do the same thing on Oracle 9i Release 2, the connection is ok!!
Please help me, maybe there's an additional configuration, answer me if anyone have ideas...
Thanks a lot,
David

Hi David,
I'm afraid future versions of JDeveloper will not be supporting the Database version 8.0.5. We will continue to support 8.1.7 and above versions of the Database but 8.0.5 is no longer supported by Oracle.
Regards,
Lisa
JDev QA

How to restart Oracle instance from oracle client

I have an Oracle server 10g with DEVEL instance on AIX machine. I have an Oracle Client on Windows machine as well. I want to stop and start the instance DEV from my client using bat file. Is it possible ? Is anybody knows how to do it ?
KP>

well, right now the correct question should be : how to start database.
I am able to login as sysdba to DEVEL on AIX ( from Windows client) and shutdown it but when I try to startup it returns such a message:
ORA-12505: TNS:listener does not currently know of SID given in connect descriptor
but I am still able to tnsping my DEVEL from client ...Post listener status, its contents and entry tnsnames.ora file. Here is how I got connected shutdown and started. The process I followed:
1)Made entry in listener.ora file as I said earlier, restarted the listener
2)Made change in tnsnames.ora file
3)Connect from client shutdown and started.
SQL*Plus: Release 9.0.1.0.1 - Production on Fri Sep 18 16:30:58 2009
(c) Copyright 2001 Oracle Corporation. All rights reserved.
SQL> conn sys/hawaii@ia1dev as sysdba
Connected.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 364904448 bytes
Fixed Size 1287356 bytes
Variable Size 226495300 bytes
Database Buffers 130023424 bytes
Redo Buffers 7098368 bytes
Database mounted.
Database opened.
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL>
Regards.
Edited by: virendra.k on Sep 18, 2009 4:36 PM

Data Model damaged, Cannot connect to Access 2013 from within Excel 2013

Hello,
Recently I am not able to use PowerPivot for Excel 2013 and I cannot connect to my Access 2013 database tables from within Excel 2013. Whenever I try to click on a slicer in my Excel worksheet, it gives me the following error: "Excel was unable to load
a necessary component. This component might have been damaged or deleted. Reinstall the client software or data source driver software for your database."
I am using Microsoft Office Pro Plus 2013 on Windows 7, 64-bit version. I have tried reinstalling Microsoft SQL Compact Edition 2005 and reinstalling Office 2013. I have run out of ideas and am a loss what to do next ?
Can anyone help point in the right direction for a possible solution to this problem ???
Would appreciate all help.
Thank you.
~Maneesh
The problem with being punctual is, there's nobody there to appreciate it !!!

Hi
This is the forum to discuss questions about apps for office develop. For your question is more about Excel, I will move this thread to the TechNet forum for
Excel
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly
can either share their knowledge or learn from your interaction with us.
Thank you for your understanding.
Best Regards
Lan
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to connect Oracle 10g Express from Visual Studio Server Explorer

Hello,
Please help me out here. I am connecting from Visual Studio 2008 to Oracle 10g Express Edition and the I have installed the ODAC 11 and the ODP.NET as well for Visual Studio(Both include Oracle Developer tools). But whenever I tried to connect from my Visual Studio 2008 server explorer so that I can have the database and its object there, I do get this error : "ORA-12560 : TNS: protocol adapter error."
The following is what I specified in my connection box:
DataSource Name: (Local Database)
Username : HR
Password: the password for it.
My OS is : Windows Vista Ultimate.
Please anyone who has solved such error should just help out here.
Thanks all

Thank you for your reply. I will like to know if you can use Visual Studio. In visual studio there is what we called Server Explorer and from there you can create connection and access all the database server from there. I am able to connect to the Oracle XE through the browser and I was able to crete table and other stuffs like that but when I tried to connect from Visual Studio 2008, I get the 12560 Error. I checked my TNSNAMES and found this:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = OLAMMIE)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Look at what I have in my Sqlnet.Ora file,
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES = (NTS)
Please kindly help me out of this as it is very urgent. I can connect from browser using http://127.0.0.1:8080/apex but cannot connect from my C# code and Server Explorer. What is likely to cause this error.
Thank you for helping me in advance.

"System cannot connect to the application server" (Admin Client only)

Hello Experts,
I have a strange issue: I am getting "system cannot connect to the application server" when I am trying to launch BPC Admin.
I successfully connect to the same application server with Excel client on the same PC.
I am able to connect via Admin from another PC.
The installation in question is a new installation. The only difference between my PC and a troubled one is IE7 vs. IE8 - IE8 is the one giving issues.
BPC site is in Local Intranet zone. Windows Authentication is enabled. What am I missing? Local Policy? IE8 settings? Folder permissions (I'm local admin on both PCs)?
It's BPC 7.5 SP05.
Thanks in advance,
Akim
P.S. OS: Windows Server 2003 SP2 32-bit (Citrix box).
Edited by: Akim Zubarchuk on Mar 30, 2011 12:28 AM

Hi Akim,
Check client diagnostic for admin client can provide good information.
Any way if you are able to connect with excel client not with admin client I will say:
1. Check the rights of user used to connect with admin console
2. Check proxy settings
3. Disable antivorus or firewall into that computer.
4. Make sure the installation of admin client was correct done.
In my opinion it is a big probability to be point 3 or 4.
Regards
Sorin Radulescu

Connecting to DirectAccess server from a client behind proxy with authentication

Hi,
All our DA clients are working fine except those that are working from a client company where a proxy with authentication is used.
Our DA server is running Windows server 2012 and clients are running Windows 7.
I have found similar posts, where it states it is a known issue and it is fixed by a new feature in Windows 2012, however i cannot find more info:
http://technet.microsoft.com/en-us/library/hh831416.aspx
IP-HTTPS runs in a system context rather than a user context. This context can cause connection issues. For example, if a DirectAccess
client computer is located in the network of a partner company that uses a proxy for Internet access, and WPAD auto detection is not used, the user must manually configure proxy settings in order to access the Internet. These settings are configured in Internet
Explorer on a per user basis, and cannot be retrieved in an intuitive way on behalf of IP-HTTPS. In addition, if the proxy requires authentication, the client provides credentials for Internet access, but IP-HTTPS will not provide the credentials required
to authenticate to DirectAccess. In Windows Server 2012, a new feature solves these issues. Specifically, the user can configure IP-HTTPS to work when behind a proxy that is not configured using WPAD and IP-HTTPS will request and provide the proxy credentials
needed to IP-HTTPS request authenticated, and relay it to the DirectAccess server.

Hello,
As far as I know it's a feature of Windows 2012 URA with a Windows 8 client.
Unfortunatelly you will have trouble with proxy authentication with Windows 7 client I think
Regards,
Follow me on Twitter http://www.twitter.com/liontux | My Blog (French/English) :
http://security.sakuranohana.fr/

Cannot connect to itunes store from my Netbook and Ipod touch 4g

Hello
I have upgrated my Ipod touch to Ios 5.0.1 and until recently i was able to download and update Apps from itune store from both my Netbook and Ipod Touch 4g . The weird thing is i am able to browse the store but only not able to doanload or update it says to check network connections. And also i am not able to open the Apple ID login page from both Ipod touch and netbook. Now from yesterday even my gamecenter wont login. I have tried so many solutions provided in the forums and discussions,
Tried resetting the Network setting
Tried resetting all the settings
Tried Hard Reset
Tried Logout and Login the Apple id
Tried with parental controls turning off , turning them on uncheck , recheck the settings
tried deleting hosts files
Tried to restore - which annoyingly did not restore coz it gives me an error cannot connect to software update
Tried Lan settings - uncheck Proxy Server
I have tried open the Apple Id in my office computer and it opened just fine. I am able to browse other websites from both Safari and my IE 8 and Chrome. But still i am not able to connect.
Now i have reset my password and need to check if that will work .
But can anyone help me with this. Its drivning me crazy for the past few days and i am kicking myself for upgrading to IOS 5 instead of my old version . Please help

Thank you so much for replying. But resetting my apple I'd Password seems to have done the trick. I am able to download apps :). Got me worried I even uninstalled kaspersky 2012 :( got to reinstall back

Cannot connect to wireless network from a new HP Officejet Pro 6830

Just purchased a HP Officejet Pro 6830 wireless printer.
Set it up connecting my Dell PC and it initially worked.
THEN something happened.
ICON on screen on printer indicates "NO WIRELESS NETWORK FOUND"
Tried rebooting the Cable modem, then the router, then the printer and then the PC.
Still did not work.
What should I do?
Thank you for any help.

Hi @I-Love-HP-Gear,
Welcome to the HP Forums!
I noticed that you cannot connect to the wireless network from a new HP Officejet pro 6830, I am sorry to hear this, but I am happy to help you with your connection issues!
Are you able to make copies with the printer? Copy Text or Mixed Documents.
What Operating System are you using? Windows or Mac? If you do not know the Operating System you are using, please visit this website. Whatsmyos.
In the meantime, please see the following:
This general printing guide, Print Jobs from Your HP Printer are Stuck in the Print Queue.
This wireless guide for maintaining the connection. Printer Does Not Maintain Wireless Connection.
The HP Wireless Printing Center for more information. HP Wireless Printing Center.
Hope this information helps, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

After update client and server to Lion Unable to (re)connect to OD server from updated client (Lion)

Hi all,
I'm a bit in the dark here.
All day searching and reading.. but nothing much yet.
After updating the server and a client to OSX Lion, I'm unable to connect to the open directory of the updated server.
The previous config worked very nice for months.
Now it's a bit iritating, cause imho it seems nothing is in place and its a bit hard to find a solution or how to setup / correct the OD Lion server .
Of course i have downloaded the manuals, that state it's all so easy, and I have seen all the movies on the tubers and they also state its so easy.
Well, since I am feeling a big noob now and before my "self value" degrades 2 below 0 I'm asking 4 your help guys...
Can you give me the candle to find the way in the dark?
There are more things that don't work, but save that for later.. ;(
Situation is as follows:
Started to upgrade the Server 1st.
Then tested from the "old client" and all is working reasonably
Then upgraded to the new Lion client also,
and you guessed it right, no way in.
It's a pretty strait up config...
Hope someone can push me in the richt direction..
(hope it's not the push service from apple, arf arf, cause that's one of the other things that is not working yet)

Steps I took upto now:
What I did is go to the client and start the Directory Util, and then select the search config.
Add manually the info of the server.
Then If I type in the IP address, i got the green bulp. But it seems not to work.
When I enter the fqdn, I get the error 2100 could not connect to the ODserver (send by the com.apple.systempreferences)
Because it's an upgrade I deleted then the total contents of the previous settings that where initiated by the "old" setup send by the OD server prev. upgrade.
Then I deleted the kerberos files on the client, and all other things related. connecting to the OD server.
Then I deleted the Machine account on the OD server and back to the client.
Then I created the machine account again from the client manually by going in the OD util on the client.
(connected manually by adding the ip address and then clicking the lock on top of the menu and then after auth succeeded I could see all the rec's and other stuff ..which is a great new feature that you used to do by the
WGM. Now available by the ODutil. Nice.
Okay, after all these steps, I get the feeling it should be able to work, but still the 2100 error.
Somehow it "seems" that the DNS is not responding, but when I get in the terminal, it responds nicely to the pings.!!! And almost everything (not because of faulty DNS) is working.!
So now what?
Any help be appreciated.
(srry 4 typo's /Language. it's a bit late in Europe and not my main Language)

Cannot connect to 10g instance from 11g client (ORA-12638)

Similar Messages

Maybe you are looking for