Cannot connect to Air Disk on Wired PC.

I cannot connect to my air disk on a wired PC. It gives me an invalid user or password (error 5) Message. I can connect just fine via my Wireless PC. Odd.
Any ideas?

Urp, make that error 1203.

Similar Messages

  • Suddenly, my wireless connection (including Air Disk) is acting all screwy.

    My airport express sometimes shows three of four airport bars and my connection becomes very intermittent. When the signal is full strnegth, everything seems to work, with the exception of my Air Disk. It simply won't mount anymore. I have never had these problems until the most recent updates. However, under a wired cnnection, everything works fine.
    Is there some sort of a bug going on with all the latest Apple-latest wireless and airport drivers? This is pretty annoying.

    I just had the same problem. Downgrading the airport firmware from 7.2 to 7.1 fixed it for me.
    Message was edited by: J Moore

  • Cannot connect iPad Air to VGA Monitor

    Hi,
    I received n Ipad Air for Christmas so gave away my old gen 1 Ipad, now I am beginning to wish I hadnt as there are so many problems!
    One I am trying to resolve right now is very iportan as I have aconference to attend and need to connect the ipad to a std PC VGA monitor to output video (I cannot use airdisplay or wireless connectivity). I have a STD PC monitor here which worked fine ith my 1st Gen Ipad and i bought a lightnng convertor for my VGA adaptor but hen connected ot the mobitor I get nothing. Have tried every permutation of on/off of monitor and Ipad to no avail.
    Does anyone have any suggestions?
    thank you
    Elizabeth

    Hi,
    sorry, to  clarify, I had an adaptor for my Gen 1 Ipad to VGA and that used to work fine, when I got the Ipad Air the Apple store sold me a lightning adaptor which goes from the Ipad Air to the Gen 1 VGA adaptor and I pug the VGA cale into that original Gen 2 Adaptor, does that make sense now? The idea being so that I could use the orginal VGA adaptor from my Gen1 Ipad which was a much cheaper option hat buying a whole new adaptor. Do you think I was sold the wrong thing then?
    thanks
    Elizabeth

  • Cannot connect Macbook Air to Samsung TV via HDMI

    Hello, I have been completely unable to get my Macbook Air (13-inch, Mid 2011, running OS X 10.9.1) to connect to my new Samsung TV (UN32EH5000F)  I feel like I have tried everything I can think of, have spent hours now looking for a solution online.  I also consulted Samsung tech support, who were not helpful in that they insisted the problem is with my Macbook (because the HDMI port on the TV works when I hook up my DVD player).
    I'm trying to connect my Macbook Air to the TV using a Mini DisplayPort (Thunderbolt Compatible) to HDMI cable.  I have gotten the connection to work on my LG monitor (via the same HDMI cable), but this did require some switching back and forth between sources before it would appear as an external monitor on my Mac and doesn’t seem to work reliably.  Sometimes I can get the LG monitor to work as an external display over HDMI and sometimes I can’t. 
    I have also gotten the TV to work ONCE on my Macbook Pro (15-inch, Late 2008, running 10.9) by plugging the cable into the Mini DisplayPort while the computer was asleep.  I have not been able to replicate this in many tries since that first time.
    When I insert either end of the cable (either into the TV or the Macbook Air), the screen flashes as if recognizing that the cable is plugged in, but the TV always says "No Signal." 
    I have also tried:
    Every possible combination of plugging in cables
    Shutting down my Mac and the TV and rebooting
    Switching the source on my TV back and forth
    Plugging the HDMI cable into both ports on the TV
    Changing the name of the HDMI source on my TV (to available options like "PC", "DVI", "DVI PC", etc.)
    Battery power and AC adaptor
    Resetting the PRAM and the SMC
    Using the Option button in Display preferences to click “Detect Displays”
    Any help would be appreciated!

    For Netflix viewing, youre going the LONG way around to watch same using your Macbook
    Get an AppleTV which you can use for Netflix, and Airplay and watching tons of free content.
    I use the same for netflix and Airplay of video over wifi.
    Best $100  gadget money can buy

  • Cannot connect to USB disk connected to Airport

    I have a USB disk connected to the USB port on my Airport Extreme.  The disk has a volume label already set and had been previously directly connected to my IMac
    I've gone into the Airport utility and updated the 'Disks' information to include "Enable file sharing" and "Secure Shared Disks" "With Accounts".  I have the users listed under acounts and have set the passwords, same as login passwords.
    But, I can't successfully login to the disk.  I've tried the base station password, the network access pasword, the user password: none work.
    What am I missing here?

    Does the disk appear as a volume when you check using the Disk tab in AirPort Utillity?  In the example below, a WD Drive is connected to the USB port of an AirPort Extreme.
    If the drive does not appear here first, you will not be able to access it. Check to make sure that the drive is formatted in Mac OS Extended (Journaled). FAT32 will also work as well. 
    Some other formats like NTFS or exFAT might be able to be read when the drive is connected directly to a Mac.....but these formats are not supported with the USB port on the AirPort Extreme.
    If the drive is formatted correctly, try using a powered USB hub. Connect the powered hub to the USB port on the Extreme, then connect the drive to the powered hub.

  • Windows can't find air disk

    I have been searching for a long time now and can't find any answer how get my windows xp to connect to air disk..! Can anyone help would be greatly appreciate.
    ( I use air disk to share data in office, not to syn or anything )
    Thx

    You need to install the Airport Base Station Disk Agent software that comes on the installer disk with the Airport Base Station. You might be able to download the software from Apple, too. This will put an icon on your system tray that allows you to access the AirDisk.

  • HT1338 cannot connect my MacBook Air to a projector  -does not detect and 2nd monitor. I have a new Mini port to VGA cable made by apple. When I read online I see that many people have the same problem - Is this an Apple defect??????????????????

    I cannot connect my MacBook Air to a projector - It will not detect a 2nd monitor or display. I am using an Apple made Mini Display port to VGA adapter. As I read online I see that many other peple are having the same problem. Is this an Apple defect!!???? If so it just burst the bubble about how great macs are. I never had a problem with that on a PC. I hope I am wrong. What can you tell me?

    Hi There,
    I have had the exact same issue but with a projector.
    The issue lies with Mountian Lion 10.8.2.
    I tried many a combination with no luck to get HDMI working.
    Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
    Bought my macbook home and voila, now displaying through my projector.
    There is a small graphics update after 10.8.1 which seems to be the cause.
    Hope this helps.
    Thanks.

  • My app store won't work on my iPod Touch 4gen running on ios 6.1.5 and when I open app store it says "cannot connect to iTunes Store" i shut my ipod down and turned it back on but it still dosn't work but it will open on my Mac Book Air

    My app store won't work on my iPod Touch 4gen running on ios 6.1.5 and when I open app store it says "cannot connect to iTunes Store" i shut my ipod down and turned it back on but it still dosn't work but it will open on my Mac Book Air. If sombody could tell me how to fix this that would be awesome!

    Can't connect to the iTunes Store

  • My iPad won't recognise my air printer, it is connected as I checked by typing in IP address into Safari, but when I try to print it just says cannot find any air printers.

    my Ipad won't recognise my printer. It is connected as I have typed the IP address into Safari which confirms connectivity. Spoken with canon who suggest it it is a problem with IOS not recognising the functionality. When I try to print it says cannot find any air printers. Printer is working via LAN set up on my laptop. Don't want to have to spend £25 to speak to an apple support team. Has anyone else experienced this problem. Printer is a canon MG 3250.

    A few things you could try:
    Reboot your modem/router.
    Turn your printer off then on again & make sure it's connected to the network.
    Reboot your iPad holding down the home & sleep/wake buttons simultaneously until the apple logo appears then release & let the iPad boot up normally.
    Try going into Settings on your iPad & select General->Reset->Reset Network Settings.
    Also, have a look at this:
    http://www.canon.ca/support_images/KB_Images/Shared_wifi_documents/How_to_Print_ Using_Apple_AirPrint_NEW.pdf

  • "Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."  Trying to format my iomega external HD for use with Mac

    Hi. Trying to connect iomega ext. HD. i have to reformat for Mac. When i plug in & go to Disk Utility,the external shows up and i'm supposed to click "partition". When i do, a box comes up saying ""Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." I quit and relaunched, same results. After googling my question, i came up with this:
    "Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."
    (Quitting and reopening Disk Utility does not help.)
    The following also appears in Console log:
    *** malloc[419]: Deallocation of a pointer not malloced: 0x290a410; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug : for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
    Workaround
    Quit Disk Utility.
    From the Finder's Go menu, choose Go to Folder....
    Type the following, then click OK: /Library/Receipts
    Temporarily remove these iTunes receipts from /Library/Receipts (sort the folder alphabetically as a list):
    iTunes.pkg
    iTunes4.pkg
    You can put them on the desktop, for example. Do not remove iTunesX.pkg or iTunes Phone Driver.pkg.
    Open Disk Utility and repair disk permissions again.
    Quit Disk Utility.
    Put the removed iTunes receipts back in /Library/Receipts.
    Note: This issue does not affect Disk Utility's verify or repair disk features.
    All seemed good, for a moment, until, upon going back to Disk Utility after removing itunes4.pkg and putting on desktop (i did not have itunes.pkg to remove) the same thing was happening. When i highlite my iomega ext. on left of page, disk perrmissions is grayed and does not allow me to click on it. Same problem from the start. Can somebody please help me out here? That would soooo awesome. Thanx!

    i'm just scared i will do something wrong on my own and lose my data.
    You shouldn't be scared of that, because you should already have backups. If you don't have backups, then backing up is the first priority.
    Insert the Snow Leopard DVD and restart. When you hear the chime, hold down the C key and keep holding it until the Apple logo appears on the display. You should now see the language selection screen. Select your language, then choose Utilities > Disk Utility from the menu bar. In the Disk Utility window, select the external drive (not the internal). The drive may already have a data partition, in which case there will be another icon below the drive icon. Choose the drive icon, then select the Partition tab. Create a single partition with the default options (GUID partition table, Mac OS X Extended Journaled).
    When the partitioning is done, select the startup volume on your internal drive in the DU window. Select the Restore tab. Drag the icon of the startup volume to the "Source" field. Then drag the icon of the newly-created volume on the external drive to the "Destination" field. Make sure you have this right. Then click the Restore button, and the data on your startup volume will be copied to the external drive.

  • Hi.  My air port is connected and wifi is working but i cannot connect to the time capsule to access any files stored there

    Hi.  My air port is connected and wifi is working but i cannot connect to the time capsule to access any files stored there

    Hi.  My air port is connected and wifi is working but i cannot connect to the time capsule to access any files stored there

  • Facetime between iPad2 and MacBook Air worked fine here in the USA.  The iPad2 is now in Rome, Italy and we can't connect internationally.  We both can hear the caller ringing in, but after accepting the call we cannot connect.  No voice, no video.

    Facetime between iPad2 and MacBook Air worked fine here in the USA.  The iPad2 is now in Rome, Italy and we can't connect internationally.  We both can hear the caller ringing in and can see who is trying to call, but after accepting the call we cannot connect.  No voice, no video. iPad is successfully sending and receiving eMails, but no Factime connection   What's up?

    I am curious if possibly the hotel has some sort of VOIP block on.  Have you tried Skype?  Did you talk to the hotel staff?  My husband is traveling to Milan in a couple of days and I wonder if he will run into the same issue.  He has had no problems from Istanbul but he is staying in a corporate apartment there.  If you find an answer please post back.  Thanks

  • Cannot connect Time machine external disk

    My Mac with OS 10.9.5 (Mavericks?) time machine disk keeps loosing the connection to the disk and I cannot figure out how to reconnec the disk.

    If Disk Utility does not recognize the external device, it's probably broken and needs to be replaced. Try a different USB cable and different USB port on your Mac before drawing that final conclusion.
    An OS X upgrade itself won't directly cause hardware failure. What might have occurred is that the extensive backup subsequent to upgrading OS X may have accelerated its eventual demise.
    Also, if you had been using particular Western Digital "utility" software known as "drive manager", "SmartWare", or words to that effect, it was known to cause external hard disks to become unusable, chronicled here. WD allegedly fixed that problem a long time ago. All software similar to it should be avoided.

  • HT4356 I can see my printer and iPad on router but iPad cannot connect to printer. Printer is on list of air printer models accepted. Help!

    I can see my printer and iPad on router but iPad cannot connect to printer. Printer is on list of air printer models accepted. Help!

    You may have to visit the printer manufacturer's web site and look into their support pages to get a print driver for your Mac, and install it. Or see if you can see if a driver may already be in your Mac by checking settings, since there are many drivers already installed in Mac OS X.
    Good luck & happy computing!

  • HT4356 I have an Epson sx235 stylus printer but cannot connect it to Air print, any suggestions?

    I have an Epson Stylus SX235 printer but cannot connect it to Air print, any help with this would be apprecated

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    You can print to a USB printer connected to your LAN or computer by installing/activating Ait Print on a PC or Mac.
    Activate AirPrint on a Mac;
    http://netputing.com/airprintactivator/
    Install AirPrint on a PC;
    http://jaxov.com/2010/11/how-to-enable-airprint-service-on-windows/

Maybe you are looking for