Cannot connect to broadband with new modem

Hello
Had to upgrade my setup with a new router and a new modem.
The modem is a TP-link 8817 and I have followed the instructions to set it up.
All went through fine and I can see the ADSL status as 'showtime' and can see the sync rate fine too.
What I cannot see is the ip address, dns and gateway field populated. The status of the line is "Down"
I am connecting using PPoA VC MUX using a MTU of 1400 with VPI 0 and VCI 38. Frankly I cannot see what I am doing wrong.
I have got FON on the line which is not disconnected yet, would that be an issue?
THanks

rento wrote:
Out of boredom I tried using [email protected] and password as a password.... It does connect now.
Cheers!
Yes, you normally need a password, otherwise many routers simply do not authenticate.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

Cannot connect to DB2 with new v7.1.1

Our DB2 has just been updated from version 6 to 7.1. Now, when I try to connect I get this error:
SQLException: COM.ibm.db2.jdbc.DB2Exception: [IBM][CLI Driver] SQL0332N There is no available conversion for the source code page "1208 UNKNOWN 3" to the target code page "". Reason Code "". SQLSTATE=57017
Error Code: -332
Do I need a new driver? I don't think so, because the docs say it works with version 7.1.
Any clues as to what I need to do to fix this?

FYI: I believe we've made some ground on this one. We strongly feel it is a character conversion problem. The DB2 docs say that when a client or application accessing a database is running in a code page that is different from the code page of the database, then a character conversion will occur. However, does anyone know how to solve this problem. Do we have to install something on the DB2 side that will interpret the code pages of JDBC?

Cannot connect to wifi with new iPad or iphone5

Everything was fine before ios6 update? Do I need a new router or what? This is very frustrating and it seems apple is doing nothing! Not acceptable!

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

TS1286 Cannot connect to internet with USB

I am a new user of Ipod touch 5th gen 32 gig I cannot connect to internet with usb?

Hi bikernblondie,
When you say that you're trying to connect to the internet with USB, do you mean that you're trying to connect your iPod to the internet so that you can surf the internet with a browser on your iPod, or that you're trying to connect your iPod to your computer so that you can sync it with iTunes and bring over songs, movies, apps, etc.?
- O.C.

After a system restart i cannot connect to SAP with SAPGUI.

After a system restart i cannot connect to SAP with SAPGUI.
See attached log "dev_disp" and "dev_w0"
At the end of this message you can see the comparison between the
defective system and another working system
I notice the absence of the "IGS400" process
Could you please help me ?
Best regards to everybody.
"dev_disp" log file tell me : ************************
trc file: "dev_disp", trc level: 1, release: "640"
Thu Jun 21 13:21:24 2007
kernel runs with dp version 132(ext=102) (@(#) DPLIB-INT-VERSION-132)
length of sys_adm_ext is 312 bytes
sysno      00
sid        SVI
systemid   324 (IBM iSeries with OS400)
relno      6400
patchlevel 0
patchno    147
intno      20020600
make:      single threaded, ASCII, 64 bit
pid        380
Thu Jun 21 13:21:27 2007
***LOG Q00=> DpSapEnvInit, DPStart (00 380) [dpxxdisp.c   1100]
     shared lib "dw_xml.so" version 147 successfully loaded
     shared lib "dw_xtc.so" version 147 successfully loaded
     shared lib "dw_stl.so" version 147 successfully loaded
     shared lib "dw_gui.so" version 147 successfully loaded
     shared lib "dw_mdm.so" version 147 successfully loaded
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >FRASTEST_SVI_00                         <
DpShMCreate: sizeof(wp_adm)          10712     (824)
DpShMCreate: sizeof(tm_adm)          3021432     (15032)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpShMCreate: sizeof(comm_adm)          216000     (432)
DpShMCreate: sizeof(vmc_adm)          0     (448)
DpShMCreate: sizeof(wall_adm)          (22440/36712/56/104)
Thu Jun 21 13:21:28 2007
DpShMCreate: SHM_DP_ADM_KEY          (addr: 700000080000000, size: 3337656)
DpShMCreate: allocated sys_adm at 700000080000000
DpShMCreate: allocated wp_adm at 700000080001830
DpShMCreate: allocated tm_adm_list at 700000080004208
DpShMCreate: allocated tm_adm at 700000080004230
DpShMCreate: allocated wp_ca_adm at 7000000802e5ca8
DpShMCreate: allocated appc_ca_adm at 7000000802ea2f8
DpShMCreate: allocated comm_adm_list at 7000000802eba68
DpShMCreate: allocated comm_adm at 7000000802eba80
DpShMCreate: allocated vmc_adm_list at 700000080320640
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 700000080320668
DpShMCreate: allocated wall_adm at 700000080320670
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
Thu Jun 21 13:21:29 2007
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsIUnamFileMapInit: ES base = 0x7000000d0000000
EsStdInit: Extended Memory 4096 MB allocated
<ES> 1023 blocks reserved for free list.
ES initialized.
Thu Jun 21 13:22:33 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
Thu Jun 21 13:22:35 2007
***LOG Q0K=> DpMsAttach, mscon ( FRASTEST) [dpxxdisp.c   10036]
Thu Jun 21 13:22:36 2007
DpStartStopMsg: send start message (myname is >FRASTEST_SVI_00                         <)
DpStartStopMsg: start msg sent
Thu Jun 21 13:22:47 2007
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Thu Jun 21 13:22:49 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
DpMsgAdmin: Set patchno for this platform to 147
Release check o.K.
Thu Jun 21 13:39:13 2007
DpSigInt: caught signal 2
DpHalt: shutdown server >FRASTEST_SVI_00                         < (normal)
Thu Jun 21 13:39:14 2007
***LOG Q0I=> NiPWrite: writev (32: Broken pipe) [niuxi.c 1140]
ERROR => MsINiWrite: NiBufSend (rc=NIECONN_BROKEN) [msxxi.c      2455]
ERROR => MsIModState: MsINiWrite (rc=NIECONN_BROKEN) [msxxi.c      3695]
MBUF state OFF
MBUF component DOWN
DpModState: change server state from STARTING to SHUTDOWN
Thu Jun 21 13:39:15 2007
Stop work processes...
Thu Jun 21 13:40:18 2007
ERROR => DpWpKill(411, SIGUSR2): kill failed [dpxxtool.c   2462]
Stop gateway
Stop icman
Terminate gui connections
waiting for termination of work processes
Thu Jun 21 13:40:19 2007
waiting for termination of work processes
Thu Jun 21 13:40:20 2007
waiting for termination of work processes
Thu Jun 21 13:40:21 2007
waiting for termination of work processes
"dev_w0" log file tell me : ************************
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
M sysno      00
M sid        SVI
M systemid   324 (IBM iSeries with OS400)
M relno      6400
M patchlevel 0
M patchno    147
M intno      20020600
M make:      single threaded, ASCII, 64 bit
M pid        404
M
M
M Thu Jun 21 13:22:00 2007
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 404) [thxxhead.c   1146]
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Thu Jun 21 13:22:11 2007
C R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is R3640ASVI
C
C Thu Jun 21 13:22:13 2007
C Connection to database done without problems.
C -
C -
DbSl EGO Structure
C -
C     SAPSYSTEMNAME               = SVI
C     Character encoding          = ASCII
C     process class               = dialog process
C     workprocess id              = 0
C     local host                  = FRASTEST
C     dbhost                      = FRASTEST
C     rdbname                     =
C     dbname                      = SVIFRASTEST
C     dblib                       = R3SVIDATA
C     application server          = DVEBMGS00
C     Connect type                = LOCAL
C     pid                         = 404
C     dbjobname                   = WP00
C     dbjobuser                   = SVI00
C     dbjobno                     = 025901
C     wpjobname                   = WP00
C     wpjobuser                   = SVI00
C     wpjobno                     = 025901
C     DB2/400 vers. appl. server = PASE 4
C     DB2/400 vers. DB server     = V5R4
C     da_cache_size               = 100
C     reopen                      = ON
C     timeout_retry               = 3
C     ODP threshold               = 800
C     ODP commit thresh.          = 810
C     ODP open thresh.            = 850
C     QAQQINI library             = Default (QUSRSYS)
C     Alternate QAQQINI library   = Not specified
C     use_lobs_for_long           = ON
C     use_lobs_for_short          = OFF
C     single_execution_threshold = 2000
C     single_execution_reuse      = OFF
C     keep_tmp_SQLpkgs            = OFF
C     dbsl_trace                  = off
C     allow_cancel                = OFF
C     nqe_optimize_method         = O - All I/O (compatibility mode)
C     query_compl_reval           = O
C     nte_list_size               = 10
C -
C
C Thu Jun 21 13:22:17 2007
C SQL monitor started for job
B
B Thu Jun 21 13:22:18 2007
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20070621 132200 FRASTEST
M
M Thu Jun 21 13:22:37 2007
M db_connect o.k.
M
M Thu Jun 21 13:22:38 2007
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
ACTIVE TRACE LEVEL           2
ACTIVE TRACE COMPONENTS      all, M
M -
C-STACK -
=> 64 bit R/3 Kernel
=> 64 bit OS400 Kernel
=> Heap limit      = unlimited
=> Stack limit     = unlimited
=> Core limit      = unlimited
=> File size limit = unlimited
=> Heap address = 0x40000000000000009ED34587C2E94220
=> Stack address = 0xffffffffffff3f0
=> Stack low     = 0xfffffffffffdb30
=> Stack high    = 0xffffffffffffa90
=> Stack Trace:
     Unknown at 0x3618
     sleepms() at 0x1000f9324
     SpinLockSemRq1() at 0x1000f926c
     SemRq() at 0x1000fcf6c
     ThIPCInit() at 0x1000ac1a0
     tskh_init() at 0x1000ad704
     tskhstart() at 0x1000c0950
     DpMain() at 0x10175ad2c
     nlsui_main() at 0x10172dee8
=> CPU Registers:
     msr = 0x800000000000f032     iar = 0x0000000000003618
     ctr = 0x0000000000003610      lr = 0x09000000000a2890
     xer = 0x0000000008000000      cr = 0x000000002a404445
     r00 = 0x0000000000000000     r01 = 0x0ffffffffffff3f0
     r02 = 0x00000000000000a4     r03 = 0xffffffffffffffff
     r04 = 0x0000000000000000     r05 = 0x0000000000000000
     r06 = 0x0000000000000000     r07 = 0x0ffffffffffff520
     r08 = 0x0000000000000001     r09 = 0x0000000010108003
     r10 = 0xb00010000c90e000     r11 = 0xb00010000c90ef30
     r12 = 0x0900000000001eb0     r13 = 0x0000000182784a50
     r14 = 0x0000000000000002     r15 = 0x00000001810e6c48
     r16 = 0x0ffffffffffffb28     r17 = 0x000000018001bf20
     r18 = 0x0000000000000003     r19 = 0x0000000000000004
     r20 = 0x0000000180c6de34     r21 = 0x0000000180c6de28
     r22 = 0x000000018004ce60     r23 = 0x0000000180c6e244
     r24 = 0x0000000000000064     r25 = 0x0000000000000158
     r26 = 0x0000000000000158     r27 = 0x0000000000000000
     r28 = 0x0000000000000000     r29 = 0x0fffffffffffffe0
     r30 = 0x09001000a005ec48     r31 = 0x0000000000000000
Thu Jun 21 13:40:23 2007
Library   |(SRV)PGM |Module    |Function/Statement No.
Thu Jun 21 13:40:24 2007
|--||--
QSYS      |QP2USER2 |QP2API    |__Qp2Fork 8
QSYS      |QP2USER2 |QP2API    |runpase_main__FPi 6
QSYS      |QP2USER2 |QP2API    |runpase_common__FiPvT2 2
R3640ASVI |O4PRTLIBC |AS4STACK |As4Stack_From_PASE 3
R3640ASVI |O4PRTLIBC |AS4STACK |As4StackOut 10
R3640ASVI |O4PRTLIBC |AS4STACK |_MATINVS2__8O4_StackFv 8
M -
ACTIVE JOBS OF DEFECTIVE SYSTEM
Opz Sottosis/Lav corrente    Tipo % CPU Funzione        Stato
      R3_00         QSYS        SBS     0,0                  DEQW
        DISP_WORK   SVI00       BCI     5,3 PGM-disp+work   CNDW
        GWRD        SVI00       BCI    10,9 PGM-gwrd        RUN
        ICMAN       SVI00       BCI     1,8 PGM-icman       RUN
        MSG_SERVER SVI00       BCI     0,0 PGM-MSG_SERVER SELW
        RSLGCOLL    SVI00       BCI     0,0 PGM-rslgcoll    SELW
        RSLGSEND    SVI00       BCI     0,0 PGM-rslgsend    SELW
        SAPOSCOL    SVI00       BCI     1,0 PGM-SAPOSCOL    RUN
        SAPSTART    SVI00       BCH     0,0 PGM-sapstart    EVTW
        WATCHDOG    SVI00       BCI     0,4 PGM-disp+work   SELW
        WP00        SVI00       BCI     1,0 PGM-disp+work   RUN
        WP01        SVI00       BCI     1,0 PGM-disp+work   RUN
        WP02        SVI00       BCI     1,0 PGM-disp+work   RUN
        WP03        SVI00       BCI     1,1 PGM-disp+work   RUN
        WP04        SVI00       BCI     0,9 PGM-disp+work   RUN
        WP05        SVI00       BCI     0,9 PGM-disp+work   RUN
        WP06        SVI00       BCI     0,8 PGM-disp+work   RUN
        WP07        SVI00       BCI     0,6 PGM-disp+work   RUN
        WP08        SVI00       BCI     0,0                  RUN
ACTIVE JOBS OF WORKING SYSTEM
      R3_03         QSYS        SBS     0,0                  DEQW
        DISP_WORK   TST03       BCI     0,0 PGM-disp+work   SELW
        GWRD        TST03       BCI     0,0 PGM-gwrd        SELW
        ICMAN       TST03       BCI     0,0 PGM-icman       SELW
        IGS400      TST03       BCI     0,0 PGM-igswd_mt    THDW
        IGS400      TST03       BCI     0,0 PGM-igsmux_mt   THDW
        IGS400      TST03       BCI     0,0 PGM-igspw_mt    THDW
        IGS400      TST03       BCI     0,0 PGM-igspw_mt    THDW
        MSG_SERVER TST03       BCI     0,0 PGM-MSG_SERVER SELW
        RSLGSEND    TST03       BCI     0,0 PGM-rslgsend    THDW
        SAPSTART    TST03       BCH     0,0 PGM-sapstart    EVTW
        WATCHDOG    TST03       BCI     0,0 PGM-disp+work   SELW
        WP00        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP01        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP02        TST03       BCI     2,5 PGM-disp+work   RUN
        WP03        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP04        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP05        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP06        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP07        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP08        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP09        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP10        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP11        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP12        TST03       BCI     0,0 PGM-disp+work   SEMW

Following your suggestions i got this error message in the log file "dev_w0"
This process creted also a very big "core" file
B ***LOG BY4=> sql error 304    performing FET on table DDNTF      [dbntab#7 @ 10281] [dbntab 1028 1]
B ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab 1028 1]
B *** ERROR => missing return code handler
caller does not handle code 1 from dbntab#7[3098]
Here is the complete log:
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
M sysno      00
M sid        SVI
M systemid   324 (IBM iSeries with OS400)
M relno      6400
M patchlevel 0
M patchno    147
M intno      20020600
M make:      single threaded, ASCII, 64 bit
M pid        317
M
M
M Wed Aug 1 17:53:03 2007
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 317) [thxxhead.c   1146]
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Wed Aug 1 17:53:05 2007
C R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is R3640ASVI
C Connection to database done without problems.
C -
C -
DbSl EGO Structure
C -
C     SAPSYSTEMNAME               = SVI
C     Character encoding          = ASCII
C     process class               = dialog process
C     workprocess id              = 0
C     local host                  = FRASTEST
C     dbhost                      = FRASTEST
C     rdbname                     =
C     dbname                      = SVIFRASTEST
C     dblib                       = R3SVIDATA
C     application server          = DVEBMGS00
C     Connect type                = LOCAL
C     pid                         = 317
C     dbjobname                   = WP00
C     dbjobuser                   = SVI00
C     dbjobno                     = 028178
C     wpjobname                   = WP00
C     wpjobuser                   = SVI00
C     wpjobno                     = 028178
C     DB2/400 vers. appl. server = PASE 4
C     DB2/400 vers. DB server     = V5R4
C     da_cache_size               = 100
C     reopen                      = ON
C     timeout_retry               = 3
C     ODP threshold               = 800
C     ODP commit thresh.          = 810
C     ODP open thresh.            = 850
C     QAQQINI library             = Default (QUSRSYS)
C     Alternate QAQQINI library   = Not specified
C     use_lobs_for_long           = ON
C     use_lobs_for_short          = OFF
C     single_execution_threshold = 2000
C     single_execution_reuse      = OFF
C     keep_tmp_SQLpkgs            = OFF
C     dbsl_trace                  = off
C     allow_cancel                = OFF
C     nqe_optimize_method         = O - All I/O (compatibility mode)
C     query_compl_reval           = O
C     nte_list_size               = 10
C -
C
C Wed Aug 1 17:53:09 2007
C SQL monitor started for job
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20070801 175303 FRASTEST
M
M Wed Aug 1 17:53:12 2007
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Wed Aug 1 17:53:13 2007
I MtxInit: 0 0 0
M SHM_PRES_BUF               (addr: 700000200000000, size: 4400128)
M
M Wed Aug 1 17:53:14 2007
M SHM_ROLL_AREA          (addr: 700000210000000, size: 268435456)
M
M Wed Aug 1 17:53:15 2007
M SHM_PAGING_AREA          (addr: 700000220000000, size: 67108864)
M SHM_ROLL_ADM               (addr: 700000230000000, size: 2672386)
M SHM_PAGING_ADM          (addr: 700000240000000, size: 164896)
M
M Wed Aug 1 17:53:16 2007
M ThCreateNoBuffer          allocated 324144 bytes for 1000 entries at 700000250000000
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 7440 bytes (50 server) at 700000260000000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B
B Wed Aug 1 17:53:20 2007
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B
B Wed Aug 1 17:53:25 2007
B dbtbxbuf: Buffer TABL (addr: 7000002d0000100, size: 64000000, end: 7000002d3d09100)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 31427136
B ***LOG BB0=> buffer TABL       started with length 64000000   bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B
B Wed Aug 1 17:53:26 2007
B dbtbxbuf: Buffer TABLP (addr: 7000002e0000100, size: 16776192, end: 7000002e0fffd00)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 8322944
B ***LOG BB0=> buffer TABLP      started with length 16776192   bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: Opening /usr/sap/SVI/DVEBMGS00/data/tbxnew failed (No such file or directory).
B dbtbxbuf: Renaming /usr/sap/SVI/DVEBMGS00/data/tbxnew to /usr/sap/SVI/DVEBMGS00/data/tbxstat failed (No such file or directory).
B dbtbxbuf: 110 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 8009 * 40 = 320360
B 4: 4000 * 160 = 640000
B 5: 8009 * 8 = 64072
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 319664 * 128 = 40916992
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 700000300000108, size: 41943040, end: 700000302800108)
B ***LOG BB0=> buffer EIBUF      started with length 40960k     bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of ESM   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 4001 * 40 = 160040
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 28755 * 128 = 3680640
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM   (addr: 700000310000108, size: 4194304, end: 700000310400108)
B ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of CUA   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 16411 * 40 = 656440
B 4: 8191 * 160 = 1310560
B 5: 16411 * 8 = 131288
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 57325 * 256 = 14675200
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA   (addr: 700000320000108, size: 16776192, end: 700000320fffd08)
B ***LOG BB0=> buffer CUA        started with length 16383k     bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of OTR   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 4001 * 40 = 160040
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 28754 * 128 = 3680512
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B
B Wed Aug 1 17:53:27 2007
B dbexpbuf: Buffer OTR   (addr: 700000330000108, size: 4194304, end: 700000330400108)
B ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf#2 @ 2212] [dbcalbuf2212 ]
C
C Wed Aug 1 17:53:29 2007
C *** ERROR => Error 304 in function db_fetch
[dbsldb4.cpp 9041]
C === DBSL Begin of SQL request after execution ===
C === DBSL SQLP0400 ===
C Function              5
C Package               DDNTFIH             Library               R3SVIA2062
C Main_Pgm                                  Main_Lib
C Statement_Name        "Wx3AAADpDB"        Cursor_Name           "CADDNTF16461"
C Open_Options          x80                 Clause_For_Describe   N
C Commitment_Control    C
C Date_Format           USA                 Date_Separator        /
C Time_Format           USA                 Time_Separator        :
C Naming_Option         SYS                 Decimal_Point         .
C Blocking_Factor       1                   Scrollable_Option     0
C Position_Option       0                   Relative_Record       0
C Rows_To_Insert        0                   Direct_Map            N
C Reuse_DA              N                   Name_Check            Y
C Use_Ptrs              0                   With_Hold             N
C Close_File_Name                           Close_Library_Name    *THRESHOLD
C Reopen                0                   Use_Perf              1
C Query_Compl. (Reval) !                   Statement_Text_CCSID 819
C Sort_Sequence_Table   *JOB                Sort_Sequence_Library *LIBL
C Language_ID           *JOB                Allow_Copy_Data       S
C Allow_Blocking        L
C === DBSL SQLDA ===
C sqldaid: SQLDA 2 , sqldabc: 816, sqln: 10, sqld: 4
C === TRACE VAR 0 ===
C sqlvar: 0, sqtype 469, sqllen 30, sqlname.data 13488
C sqlind: 0
C sqlname (hex):
C 0008000034B00000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 005400430041004C 0053002000200020 0020002000200020 0020002000200020
C 0020002000200020 0020002000200020 0020002000200020 00200020
C === TRACE VAR 1 ===
C sqlvar: 1, sqtype 501, sqllen 2, sqlname.data 0
C sqlind: -2
C sqlname (hex):
C 0000000000000000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 0000
C === TRACE VAR 2 ===
C sqlvar: 2, sqtype 497, sqllen 4, sqlname.data 0
C sqlind: -2
C sqlname (hex):
C 0000000000000000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 00000031
C === TRACE VAR 3 ===
C sqlvar: 3, sqtype 405, sqllonglen 32700
C sqldatalen NULL
C sqlind: 0
C sqlname (hex):
C 00080000FFFF0000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 0000028742000007 4100000000010000 0000280001000000 0100010000004944
C 0000000000000000 0000000000000000 0000000000000000 00000000004B4142
C === DBSL errc ===
C errc: OK
C === DBSL sqlca ===
C sqlcode: 304
C sqlerrml: 68, sqlerrmc:
C 00035CD540404040 4040404040404040 4040404040404040 4040404040404040
C 4040404040404040 4040404040404040 4040404040404040 4040404040404040
C 40400006
B ***LOG BY4=> sql error 304    performing FET on table DDNTF      [dbntab#7 @ 10281] [dbntab 1028 1]
B ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab 1028 1]
B *** ERROR => missing return code handler
caller does not handle code 1 from dbntab#7[3098]
==> calling sap_dext to abort transaction
[dbeh.c       93]
M -
C-STACK -
=> 64 bit R/3 Kernel
=> 64 bit OS400 Kernel
=> Heap limit      = unlimited
=> Stack limit     = unlimited
=> Core limit      = unlimited
=> File size limit = unlimited
=> Heap address = 0x40000000000000009E570787C2ED4260
=> Stack address = 0xfffffffffffd6f0
=> Stack low     = 0xfffffffffffd6f0
=> Stack high    = 0xffffffffffffa90
=> Stack Trace:
     AixStack() at 0x10008d040
     CTrcStack2() at 0x10008d138
     ThControl() at 0x1006551a4
     dyThControl() at 0x1003ab070
     dextIntern() at 0x1003aa06c
     sap_dext() at 0x1003aff24
     dbeh_exit() at 0x100416924
     db_ntab() at 0x10039d48c
     read_ntab() at 0x101512474
     db_cbufload() at 0x10150f40c
     reset_handling() at 0x101512f00
     init_shm_and_load_cals() at 0x10151394c
     db_cbufinst() at 0x101514c48
     db_calinit() at 0x1005ae8bc
     db_init() at 0x1001c7ae0
     ThCallHooks() at 0x1000c3654
     ThIPCInit() at 0x1000ac574
     tskh_init() at 0x1000ad704
     tskhstart() at 0x1000c0950
     DpMain() at 0x10175ad2c
     nlsui_main() at 0x10172dee8
Wed Aug 1 17:53:29 2007
Library   |(SRV)PGM |Module    |Function/Statement No.
|--||--
QSYS      |QP2USER2 |QP2API    |__Qp2Fork 8
QSYS      |QP2USER2 |QP2API    |runpase_main__FPi 6
QSYS      |QP2USER2 |QP2API    |runpase_common__FiPvT2 2
R3640ASVI |O4PRTLIBC |AS4STACK |As4Stack_From_PASE 3
R3640ASVI |O4PRTLIBC |AS4STACK |As4StackOut 10
R3640ASVI |O4PRTLIBC |AS4STACK |_MATINVS2__8O4_StackFv 8
M -
M ***LOG R1B=> ThControl, sap_dext-call (00 ) [thxxdynp.c   355]
M in_ThErrHandle: 1
M *** ERROR => ThControl: illegal sap_dext call !!! (step 1, th_errno 5, action 1, level 1) [thxxhead.c   9564]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M Entering ThSetStatError
M Entering ThReadDetachMode
M ThISend: still inside critical section semaphore ?

Cannot connect to Host with user name J2EE_ADMIN !!!

Hi all,
this exception when deploy from NWDS04s:
<i><b>Caught exception while checking the login credentials for SAP J2EE Engine. Cannot connect to Host with user name J2EE_ADMIN</b></i>
Complete exception:
<i>Result
=> deployment aborted : file:/D:/DOCUME1/VITO1.PAL/LOCALS~1/Temp/temp23237GivaudanNavigation.ear
Aborted: development component 'GivaudanNavigation'/'local'/'LOKAL'/'0.2006.03.20.16.50.48':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [milds2004] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Access Denied.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted</i>
Any help will be appreciate. Thx.
Vito

Hi Nagarajan,
it seems not good
D:\usr\sap\GVD\DVEBMGS01\SDM\program>sdm changepassword "sdmhome=D:\usr\sap\GVD\
DVEBMGS01\SDM\program" "newpassword=ADMIN1"
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_java_home=D:/j2sdk1.4.2_09
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_64bit_switch=
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_heap_size=128
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_memory_switch=-Xmx128M
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_com="D:/j2sdk1.4.2_09\bin\java" -X
mx128M -jar "D:\usr\sap\GVD\DVEBMGS01\SDM\program\bin\SDM.jar"
D:\usr\sap\GVD\DVEBMGS01\SDM\program>"D:/j2sdk1.4.2_09\bin\java" -Xmx128M -jar
"D:\usr\sap\GVD\DVEBMGS01\SDM\program\bin\SDM.jar" changepassword "sdmhome=D:\u
sr\sap\GVD\DVEBMGS01\SDM\program" "sdmhome=D:\usr\sap\GVD\DVEBMGS01\SDM\program"
"newpassword=ADMIN1"
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addI
viewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBased
SecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator g
enerateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem
startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConf
igurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHiera
rchicalContext lookup
Starting SDM - Software Deployment Manager...
tc/SL/SDM/SDM/sap.com/SAP AG/7.0005.20051006181702.0000
Initializing Network Manager (50117)
Checking if another SDM is running on port 50118
SDM is integrated in JStartupFramework. No repository changing commands are poss
ible.
Processing error. Return code: 4
Could U help, pls? Thx
Vito

Cannot connect Service Manager with Orchestrator Web Service URL

Dear TechNet User,
i cannot connect my service manager console with my Orchestrator Webservice. i try to connect to "http://AMSCO01:81/Orchestrator.svc" ... the user i´ve choose is local admin on the orchestrator Machine.
Thats the Logfile:
Date: 07.10.2013 15:23:16
Application: System Center Service Manager
Application Version: 7.5.2905.0
Severity: Error
Message: Could not connect to the Orchestrator web service.
System.Data.Services.Client.DataServiceQueryException: An error occurred while processing this request. ---> System.Data.Services.Client.DataServiceClientException: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>404 - File or directory not found.</title>
<style type="text/css">

</style>
</head>
<body>
<div id="header"><h1>Server Error</h1></div>
<div id="content">
<div class="content-container"><fieldset>
<h2>404 - File or directory not found.</h2>
<h3>The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.</h3>
</fieldset></div>
</div>
</body>
</html>
   at System.Data.Services.Client.QueryResult.Execute()
   at System.Data.Services.Client.DataServiceRequest.Execute[TElement](DataServiceContext context, QueryComponents queryComponents)
   --- End of inner exception stack trace ---
   at System.Data.Services.Client.DataServiceRequest.Execute[TElement](DataServiceContext context, QueryComponents queryComponents)
   at System.Data.Services.Client.DataServiceQuery`1.Execute()
   at System.Data.Services.Client.DataServiceQuery`1.GetEnumerator()
   at Microsoft.EnterpriseManagement.ServiceManager.Sdk.Connectors.OrchestratorRunbookConnector.GetRunbookFolders(OrchestratorContext scoContext, Folder parentFolder)
   at Microsoft.EnterpriseManagement.ServiceManager.UI.Administration.Connectors.Orchestrator.OrchestratorConnectorHelper.ValidateServerConnection(Boolean found)
System.Data.Services.Client.DataServiceClientException: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>404 - File or directory not found.</title>
<style type="text/css">

</style>
</head>
<body>
<div id="header"><h1>Server Error</h1></div>
<div id="content">
<div class="content-container"><fieldset>
<h2>404 - File or directory not found.</h2>
<h3>The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.</h3>
</fieldset></div>
</div>
</body>
</html>
   at System.Data.Services.Client.QueryResult.Execute()
   at System.Data.Services.Client.DataServiceRequest.Execute[TElement](DataServiceContext context, QueryComponents queryComponents)
any ideas? Thank you very much!

Hi,
I am unable to connect to
http://hostname:81/Orchestrator2012/Orchestrator.svc/ in IE and am getting the same error while creating the connector.
I can connect to orchestrator via http://hostname:81/ but it still gives me the same error when I create the connector (Cannot connect Service Manager with Orchestrator Web Service).
anyone seen it before?

I cannot connect my ipad with the program of yamaha stagemix, is urgent that they solve this problem to me, buys ipad esfecificamente to use that application

I cannot connect my ipad with the program of yamaha stagemix, is urgent that they solve this problem to me, buys ipad esfecificamente to use that application, has somebody been able it to solve?

I cannot connect my ipad with the program of yamaha stagemix, is urgent that they solve this problem to me, buys ipad esfecificamente to use that application, has somebody been able it to solve?

HT204053 i cannot connect the icloud with my Imac

i cannot connect the icloud with my Imac

Go to System Preference and click 'iCloud'. Then, just login with your apple account and click on items you want to activate. (like mail, notes, and photo stream)

HT1222 I cannot connect Iphone 5 with itunes store.

I cannot connect Iphone 5 with itunes store.

I couldn't earlier but it seems OK now. Possibly it was down temporarily?

Cant connect with new modem

Im currently using the Versalink 327W modem and it works fine but it disconnects randomly lately. I tried replacing the ethernet cable but it only recognizes the one I was using for some reason. I decided to purchase the Westell 6100 on Ebay but I cant connect. When I try opening internet explorer I get a log in page asking me to enter my isp email adress and phone number.
I also tried using the GT704WG modem but I cant connect to it either. All lights are fine except for the Internet light which turns Red. Is there a reason I cant connect with a new modem, when my old modem works fine?

Try this.

Cannot connect to internet with iMac connected to airport via Ethernet

Hi all,
Firstly please forgive if this problem has been posted before but unfortunately i haven't yet been able to find a solution to my problem.
I cannot seem to get my wireless network to work since updating my Airport to v5.7. I have reverted back to 5.6 but with no joy. OK, here's my setup - I have an iMac G5 1.8 which is connected to my airport via an ethernet cable (it is plugged into the correct port) and an iBook with an Airport card to connect wirelessly. The airprot is connected to my ADSL modem which is a D-Link 300T. When set up like this my iMac cannot connect to the internet even though my iBook can. When i take the4 iBook and Airport out of the equation my iMac connects fine to the internet via ethernet cable direct to my modem.
As i've said, as soon as i bring in the iBook and Airport the iMac cannot connect via airport extreme, even though the iBook can connect.
I have searched through the discussions looking for clues and answers. I have made sure that distrubute IP address is not checked and that internet sharing is off on my iMac but on on my iBook. I have tried all channels and all possible different settings on the airport admin utility but nothing works.
I hope i've given enough information to give a clear indication what is wrong, if not please ask and i will try my best to answer. Any help would be much appreciated so i can convince my girlfriend that buying my iBook was not "a waste of money!".
Many thanks in advance,
Carl.

Same questions as Paul.
Open up the Network System Pref on the iMac G5.
If you pick Show: "Network Status", what do you see ? Be precise.
If you change Show: to "Built-in Ethernet", what do you see on the TCP/IP, PPPoE and Ethernet tabs ? Again, be precise.
On the Network Status, you should see a green mark next to Built-In Ethernet, which should be at the top. It should also give you an IP address and tell you you are connected to the Internet. Well it would if it was working, so "say what you see".

Please help! Cannot connect to Itunes with Iphone or on laptop!

I dont know whats going on but I need someones help. I just bought an iphone today and cant log in into app store. It says "Cannot connect to Itunes store" when entering my apple id. I have made an account online. The weird thing is that my girlfriend account logs in just fine. Same thing with the Itunes on out laptop. I can sign in to Itunes with her account just fine, but when i sign in with mine it says "We cannot complete your itunes store request, an unknown error occured (0x800B010F) There was error in the Itunes store please try again later" But how can that be possible if my girlfriends account logs in perfectly fine? I made another account and nothing still the same, Help very frustrating since we just moved from android. I did the time adjustment by switching the year and time and going back to app store, made a new account, reseted iphone, reseted settings, whats going on? Please help

Start iTunes on your computer and make sure you are logged into your account. Now connect and sync your iPhone and Touch, disconnect and try again.

Time Capsule not working with new modem

I have been using my TC with our motorola modem for 2.5 years. On Friday last week, the modem crapped the bed and AT&T sent us a new modem, a netgear. The modem is working fine; when I connect the ethernet cable directly to my laptop the internet work perfectly, however when I try to get the wireless network going through my TC, there is no connection. All the lights on the modem work fine and every time I try to work with the TC, it says that it is working fine as well. It seems like something is not communicating between the modem and the TC.
I've tried restarting both machines numerous times, I've checked and rechecked the WEP password, the IP addresses are fine, and I'm still lost
The modem works. Time Capsule Works. I don't get it!

The new netgear is probably a modem router whereas the old Motorola was pure modem.. not sure but possible.
Reset the TC and set it to bridge modem.. plug into the netgear modem router.. and it should work fine.
If the new netgear is in fact a pure modem.. you need to turn it off and put the TC in place.. wait up to 15min for the ISP to renew the lease on the MAC address then turn on the cable modem.. wait then turn on the TC. But this is not necessary if it is a router.
What is the model number of the netgear so I can check this.. ?

I cannot connect to iTunes after new update on iPad air

I Cannot connect to iTunes or App Store after new update and I have tried all the trouble shooting stuff....no good. When I close the app the contents are there but when I tap on them the error message comes up and the app contents goes blank....Help. I need them for my business.
thanks

Hello Deryn340,
Thanks for using Apple Support Communities.
If you're currently unable to connect to either the iTunes Store or the App Store on your iPad, then I'd like you to please follow the troubleshooting steps outlined below.
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update(iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
If the steps above didn't resolve your issue, be sure that your specific alert isn't listed as a possible iTunes Store error. Then, if your issue is still unresolved, follow these steps.
Can't connect to the iTunes Store - Apple Support
Cheers,
Alex H.

Cannot connect to broadband with new modem

Similar Messages

Maybe you are looking for