Cannot connect to BT FON with various devices

Hi all,
This seems to be a common theme on these forums, but...
I have never been able to get any of my devices to connect to a BT FON hotspot (both on my own hub and elsewhere). I think it's pretty unlikely that there are faults with all of my devices. Does anybody know how to get connected?
Android phone (with BT FON app installed):
When in a BT FON hotspot, WiFi connects and the app springs into life, but a few seconds after clicking "log in" I get a message saying "There has been a network error when trying to log in. Would you like to try again?"
iPhone (with BT FON app installed):
When in a BT FON hotspot, the WiFi connects, but nothing happens (the BT FON app doesn't appear to do anything at all). Launching Safari and attempting to navigate to https://www.btopenzone.com:8443 just times out.
MacBook (Mac OS X 10.7):
In a BT FON hotspot, the WiFi connects, but launching any web browser does not result in redirection to the BT FON landing page (as the "how to connect" advice suggests). As with the iPhone, attempting to navigate to https://www.btopenzone.com:8443 just times out.
Thanks for any help you can offer!

Update: this seems to be working now (tested with Android and iPhone 4, not tried MacBook yet).
I don't know why it's started working, but I did two things in the meantime:
- Logged into BT Yahoo! mail for the first time
- Changed my BT broadband password
The devices still won't connect to FON through my hub (v3), but I suspect that's because of the reason detailed in this sticky:
http://community.bt.com/t5/BB-Out-About/Troubleshooting-BT-Fon-issues/td-p/226955
This doesn't matter to me (I only want to connect to FON when I'm away from home), so I haven't tried resetting the hub.

Similar Messages

I cannot connect to my wrv200 with sony ericsson p990 & nds lite...

I cannot connect to my wrv200 with sony ericsson p990 & nds lite...

for getting connected to the NDS through the router , try out the mentioned steps on this link ..
regarding sony erricson P990....i guess u will need to look into its wi-fi settings..
ensure that if the router has the wireless security enabled on it..it is supported by the devices....NDS lite only supports WEP....not sure about P990

TS1368 Still cannot connect to iTunes store with iPad2. Have tried all suggestions.

I cannot connect to iTunes store with my iPad2. Not sure why. If anyone has suggestions, I'm all ears... Thanks so much!

Don't know if this has any bearing on the conversation at hand, but I ran into this issue last night. Started when I couldn't purchase anything via Comixology. Which caused a lot of swearing.
But then realized, that I couldn't get to the Apple store either.
Figuring that it was my wifi access point being a jerk, I reset that. And "forgot", then reconfigured my wireless.
Still nothing.
At this point, I checked our ISP (Charter) to see if they had an outage. They did. DNS servers were hosed. I gave up and went to bed.
This morning. Same thing. One thing I noticed, was that all of our computers -- not iDevices -- had no problems. Weird.
So I checked the firewall, and found that every request was going to Malaysia, or Thailand. I have country blocking enabled on our firewall. So, I thought that was weird. Checked the IP addresses that were blocked, and found that they were Akamai addresses. I allowed one device through, to test, and everything works.
Wondering if Apple is leaning on Akamai for the flood of traffic that the IOS 6 upgrade is causing.
In any case, if your ISP, or firewall, router, what-not blocks Asian rim countries, it's worth a check.

ERROR:Cannot connect to Host: [MTW02SDEP02] with user name: [Administrator]

Dear All,
When I try to deploy WD application, it gives me this following error and doesn't deploy.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [MTW02SDEP02] with user name: [Administrator]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during getInitialContext operation. No server is running. [Root exception is
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
     at com.sap.engine.services.security.remote.login.RemoteLoginContextExt.<init>(RemoteLoginContextExt.java:34)
     at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:81)
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:355)
     ... 38 more
Caused by: com.sap.engine.services.rmi_p4.P4ConnectionException: Possible problem: no available running server node. Check your running servers.
     at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:709)
     at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:697)
     at com.sap.engine.services.rmi_p4.Parser.newRequest(Parser.java:180)
     at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:427)
     ... 1 more
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted

Hi
Try this
1. Is this is the remote server?
   if yes make one entry in host file under C:\WINDOWS\system32\drivers\etc
    format   : <server ip> <servername>
    restart NWDS
2.If not then put the Ip address instead of name inside Window--preference --Sap server Check.
3. Put some different UserId and Password who has deployment rights
Best Regards
Satish Kumar

I suddenly cannot connect to any wifi with my ipad 1. In settings my wifi is turned on. My home connection shows up under Choose a network and has a strong signal.

I suddenly cannot connect to any wifi with my ipad 1. in settings my wifi is turned on. My home connection shows up under Choose a network and has a strong signal. I have reset the Wifi under General. But when I type in my password it still says, "Unable to join the network."

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

User cannot connect to backend system with user J2EE_ADMIN.

I am using Rapid Installer to initiate the second part of the installtion "ERP 6.0 EhP 3 Self-Service Scenarios and Automatic Roles". When I get to the J2EE User section to enter the parameters, the user is defaulted to "Administrator" and I enter my password. I click next and get this message "User cannot connect to backend system with user J2EE_ADMIN." Any ideas?

If this is a double stack installation, you need to enter J2EE_ADMIN as user, NOT administrator.
Markus

HT2534 Cannot connect to itunes store with my new iPad

Cannot connect to itunes store with my new iPad

Cannot connect to iTune Store
http://support.apple.com/kb/TS1368
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/

Cannot connect to L2TP VPN from iOS devices

This weekend I decided to perform a hard drive upgrade on my little 2009 Mac mini that I run as a homespun server as a hobby. In the process, I thought it would be worthwhile to flatten the whole thing and start again from fresh.
However, in doing so, I no longer seem to be able to connect to it's VPN from an iOS device. Both my iPhone 6 (iOS 8.1.3) and iPad 3rd Gen (iOS 8.1.3) cannot connect to the VPN server over an L2TP connection – either on my local network or over 3G, even if the local IP is provided instead of a host name.
Interestingly though, my MacBook Pro has no issues connecting over L2TP when tethered to my iPhone's 4G. It can dial back home and authenticate successfully.
The settings are exactly the same on both as both are governed under a single profile containing the VPN settings and login details.
It used to work before the hard drive upgrade, but can't remember the last time I used VPN on my iPhone. Just wondering if this is a bug in iOS 8.1.x?
iOS reports "The L2TP-VPN server did not respond". Additionally, there is absolutely nothing in the Server's console for VPN or 'racoon'. In the past when I've had issues, the connect is made but doesn't authenticate or some such. This just doesn't get to the server in any way shape or form.
Any ideas?

I believe the problem is in iOS, as I am experiencing the same issue.
I have a Yosemite Server running L2TP VPN server and my Mac connects flawless, while neither the iPhone nor the iPad (both 8.2) are able to connect.
The error is the same "The L2TP-VPN server did not respond" and by looking at the server's log it seems iOS didn't even try to connect.
I have tried changing the server address in iOS with the corresponding IP, but the results it's the same.
Maybe a network setting reset?

Bluetooth connectivity, peer to peer with other devices??

Bluetooth connectivity!!! Peer to peer with other phones?
Posted: Jun 19, 2009 1:17 AM
Reply Email
Ok, I'm a 3G user and just updated to 3.0,Im pretty excited about the new Bluetooth protocalls.
When I tried to connect to a coworkers blackberry my iPhone reconized it but wouldn't connect,
can anyone tell me why thnx?
So alittle discourged I try to connect with a friends iPhone, and couldn't even found the device.
Someone please tell me what I'm doing wrong??

You cannot connect to other phones for things like file sharing. The peer to peer is for apps so you can do things like play games with other iPhones or share data from a supported app to another supported app.

'Cannot Connect to iTunes' but with iBooks instead of apps?

Hello.
So I'm having that 'Cannot connect to iTunes' problem, but instead of not being able to update or download apps, I cannot syn sideloaded books to my iPad 2? I've tried to sync the same books to my iPhone 5s and I have the same issue, but the strangest part is that it's only certain epubs that will not sync, while some other epubs have no issues and pdfs have none. According to iTunes, the books are on my device and taking up space, however the covers are faded and have a blue bar about 75% loaded at the bottom. I cannot delete them from the device, and have to do so through iTunes. I'm getting really annoyed that half my books aren't showing up on my device. Here are some solutions I've tried:
Ensuring that I'm using the cord that came with the iPad, and not my iPhone 5s cord
Uninstalling iTunes, then downloading the latest version
Restarting my iPad
Making sure my iPad is up to date
Deleting all of the books off of iTunes and adding them back
Trying to sync books in batches of 10
Resetting my network settings
Does anyone have anything that will help? I just want to read my books. :c

Probably a problem with the update server.
There are many similar cases on this discussion.

WRT 120N- Cannot connect to the internet with more than one PC at a time.

Before I went on a three month vacation,I could connect 3 or 4 PC's either wireless or wired to my router with no problems at all.I have a desk top and a laptop computer which I use at home.After I returned,I found that I could connect to the internet with only one PC at a time.
If I was say,connected via my laptop,my desk top would continuously keep getting disconnected and vice versa.I have been reading the suggestions from experts here and have done a few checks based on them.I also cannot get to my router page which is 192.168.1.1 I keep getting a message that says "Problem Loading Page" and this happens with both,Firefox and Internet Explorer.I am running Windows 7 - 32 bit on my desk top and Vista Home Premium on my laptop.
I have opened the "Command Prompt" dialogue and pinged 192.168.1.1 and thereafter I typed in "ipconfig".These are the results:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Gordon>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Users\Gordon>ipconfig
Windows IP Configuration
PPP adapter Brownwolf:
   Connection-specific DNS Suffix . :
   IPv4 Address. . . . . . . . . . . : 92.98.42.65
   Subnet Mask . . . . . . . . . . . : 255.255.255.255
   Default Gateway . . . . . . . . . : 0.0.0.0
Ethernet adapter Local Area Connection* 22:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:35a2:8753:8832:f494
   Site-local IPv6 Address . . . . . : fec0::c:35a2:8753:8832:f494%2
   IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:35a2:8753:8832:f494
   Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:a408:59a3:918e:f0ab
   Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:a408:59a3:918e:f0ab
   Link-local IPv6 Address . . . . . : fe80::35a2:8753:8832:f494%12
   IPv4 Address. . . . . . . . . . . : 192.168.0.1
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:413:cf4f:77af:474d
   Site-local IPv6 Address . . . . . : fec0::c:413:cf4f:77af:474d%1
   IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:413:cf4f:77af:474d
   Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:1591:ad9:13da:8fea
   Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:1591:ad9:13da:8fea
   Link-local IPv6 Address . . . . . : fe80::413:cf4f:77af:474d%11
   IPv4 Address. . . . . . . . . . . : 192.168.1.100
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : fe80::35a2:8753:8832:f494%11
                                       192.168.1.1
Tunnel adapter Local Area Connection* 7:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 11:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 14:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 15:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 19:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 20:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41::5c62:2a41
   Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
Tunnel adapter Local Area Connection* 23:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 24:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 28:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
I presume that this model is a modem **bleep** router as I do not have a separate modem with my system.I have a DSL connection and the firmware version of my router is ver.1.0.If I recall,I did upgrade to the next firmware upgrade a few months after I purchased the router but I am not sure.
I use both my PC's to run a small business venture and I am worried that resetting the router may cause some other problems and will stop me from using the internet.
The Command Prompt information above was taken from my laptop.
Any help will be really appreciated.
Gerard.
Solved!
Go to Solution.

brownwolf66 wrote:
No,I have a desk top and a laptop and I cannot access 192.168.1.1 on either of them.In my OP,I have used the Command Prompt dialogue on both computers to ping 192.168.1.1 and I have attached the results.This is what I got:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Gordon>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
The results I obtained using ipconfig in the command prompt have already been mentioned in my OP.
I do not know if the above result is what it is supposed to be but I still cannot access my router's home page.How do I verify if there is a proxy server and if there is one,how do I disable it in my browsers?This problem occured suddenly as a few months earlier all was well.It's getting rather frustrating.
I suggest resetting the router. Make sure firmware is updated. You can download it here - http://homesupport.cisco.com/en-us/support/routers/WRT120N. After firmware upgrade, reset and reconfigure. Just access the link below to guide you setting up the router.
* Setting up a Linksys router for DSL Internet connection
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...
* Setting up a Linksys router with Cable Internet service
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...

RDC for MAC cannot connect to TS server with error message "You were disconnected from the Windows-based computer because of problems during the licensing protocol".

the mac clients are running RDC for mac version 2.1 and they cannot connect to Windows 2008 R2 TS server. They get the error "You were disconnected from the Windows-based computer because of problems during the licensing protocol".
really appreciated if someone have a fix for this.
thanks,
/dan

Hey,
Any proposed answer for this ?
I face the same problem and my environment
and I've got same results as dle2k
1. TS lic mode is set to per user confirmed it works for windows clients.
2. the TS server's system log logged error "The Terminal Server security layer detected an error in the protocol stream and has disconnected the client".
3. the reports shows per user cal has been issued to users. no temp per device cal has been issued.
4. yes, CoRD works .
5. we tried version 2.1.1 of the Mac RD Client but it also does not work.

HT1338 Mac OS X Mavericks 10.9.1 / iTunes 11.1.4 "iTunes cannot connect to this iPhone. This device is no longer connected."

Since updating iTunes, I have been unable to connect any of my devices to my iTunes. I have two iPad Minis which come up with same exact message as my iPhone 5. When I try to close the message it just keeps reopening and the connect sound plays repeatedly on my devices. I have to use 'Force Quit' to close iTunes.
I have tried using a different cable and replugging in and out again. I have also checked for OS and iTunes updates but my software is current.

I think I solved my problem!
I noticed, when I connected, the ipad that the new "Trust this Computer" popup to Flash on and off very quickly (See http://support.apple.com/kb/HT5868 for info on purpose of the popup). It appeared for such a short time that I was never able to see it for long enough to respond to it.
Last night I switched off the lock password (the ipad was not connected to the mac when I did this). Today when I tried again to connect the Mac I heard a beep and saw the "Trust this Computer" popup. Instead of being presented for fractions of a second, as it had been previously, it was shown for a second or two before dissappearing and reappearing several seconds later etc.
When I realised that the "Trust this Computer! popup was being presented for long enough for me to push the Trust button, I attempted to press it. The popup closed and the ipad showed it was charging. The Mac presented a popup saying it had not been able to connect. I selected "OK", itunes loaded and started to sync to the ipad.
I subsequently conncted the ipad via a different cable. The problem started again (it is a genuine apple cable, supplied with the ipad). As soon as I added the cable that had worked all was OK again.
My wife's ipad had the same behaviour as I have described above.
I noticed that ios version 7.1.1 is now available. I have installed it. However this does not solve the problem as described above.
Conclusion: I now only have one out of 6 cables that I have that actually works!!! This cable is one of those "older types" that has "clips" in the side to "lock" it into place on the ipad. The ipad end is about twice the depth of the cable that was shipped with the ipad (possibly I got it with an old ipod) . What has Apple done to make so many cables unusable at overnight? I have not yet found any sources for this old type of cable.

HT1688 Cannot connect to WiFi on my iOS7 devices. It shows connection to the WiFi router but does not connect to anything online. All other non-iOS7 devices are working fine. Please advise.

I am unable to connect to WiFi on my iOS7 devices. I have an iPhone 5 and a iPad. The WiFi symbol shows connection to my wireless router but no internet connection is received. My other non-iOS7 devices are connecting without any problems. I have tried resetting network settings on both devices and rebooting my router with no luck.
Please advise.

Hello dlove103
Check out the article below for troubleshooting issue connecting to Wi-FI on your iOS device.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thanks for using Apple Support Communities.
Regards,
-Norm G.

IBook cannot connect to woreless router with airport card

The Situation
my iBook G3 dual usb cannot connect to my wireless router. The router is using wpa and wpa2 encryption and broadcasting on 802.11b and g, on channel 12. The SSID is broadcast, but the iBook airport card cannot see it. The card CAN see other networks in my area. My iMac Mini (spec OS X 10.5.5, airport built in) is connecting to the same router and can see the SSID, so its not the aerial.
I select 'Other...' on the airport menu to connect, and type in my network name and the WPA2 Personal password. I then get the message: 'The Wireless Network <network> does not support the requested encryption method'
So what's the problem? And how can I fix it?

I'm having the same problem, but having been through the threads I'm getting nowhere!
Running a 2001 dual USB G3 Ibook. Connects fine on home network via Airport Express, but will not connect to PC/Belkin wireless network at my Dad's place. Newer macs seem to connect fine - but not my old dear.
It detects the network OK and prompts for a WPA password, but it is not recognised.
The router is set up for WPA/WPA2-PSK (AES encryption)
Tried turning the security protocols off on the router - still can't connect.
Same circular "network settings have been changed by another application" if I try and use the IBook's network / airport wizards.
My software is fully up to date - the ethernet connection works fine with the router.
This is driving me insane!

Cannot connect to BT FON with various devices

Similar Messages

Maybe you are looking for