Cannot connect to camera via internet

I connect with my camera WVC54GCA in my local network,but when i try from somewhere else nothing happens.I use the domain name i took from TZO but i cannot access the camera.I have also forwarded the ports 80 and 1024 from the router.Any idea please???

thanks Gollum,
I have used TZO free 1year, quite easy to use.
Things seem to work now but I need some confirmation my pc are not open to the world now.
Can you please help me ?
Camera settings :
ddns activated with TZO provider. domain name, email, tzo keys written as received via email ; update period : every 24h at 12h
upnp activated in discover mode only (??? what is it ?)
axess port substitute : 1024
rtp/rtsp : 554,5000,1400 (?)
rtp/rtsp multicast : desactivated
basic parameters :
camera name : mycamera1
config : fix IP 192.168.1.110
subnetwork:255.255.255.0
gateway:192.168.1.1
main domain : 195.238.2.21 (what is it ???)
secondary domain : 195.238.2.22 (???)
ssid : myssid
type of network : infrastructure
security : wep
on Linksys wag200g router :
dhcp activated and start at 192.168.1.100
encapsulation : RFC2516 PPOe
Multiplexing : LLC
QS:UBR
DDNS : desactivated
Applications and games : transfer of unique connexion : http,out:80;in:80;protocol tcp
DMZ : activated
When I desactivate and use in Firefox : http://mondialpigeons.linksys-cam.com and then user and pw, I am in the router setup !!!
when I activate, I am on linksys web page
2. Is there a way to show video without showing all axess menus and linksys logo to the world ?
thanks for help
best regards
Marc

Similar Messages

Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

We did that, but it just doesn't seem to be able to connect. So basically we tried to connect to our network and insert the password, but afterwards it does nothing. Weird thing is also that the network symbol (top right of the screen) says that it has been connected, but when I go look at the system preferences --> network, it states that it has not been connected

Cannot connect to database via TNS

Hello!
I installed XE with default settings and have some trouble. I cannot connect to database via TNS. Two symptoms:
1. I can connect with SQLPLUS system/pwd (locally, without tns name input), but CANNOT connect with SQLPLUS system/pwd@EX (WITH TNS NAME input).
2. I cannot start Database Home Page.
How to avoid this problem? Any ideas?
DETAILS:
PC configuration: Win2k+SP4, 512Mb, Outpost Firewall (disabled!), No another Oracle products being installed.
TNSNAMES.ORA file:
************* BEGIN TNSNAMES *****************************************
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = pz)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
************* END OF TNSNAMES *****************************************
Listener status:
************* BEGIN STATUS *****************************************
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Prod
ction
Start Date 22-MAR-2006 17:27:15
Uptime 0 days 1 hr. 8 min. 53 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File D:\oracle\ora10xe\app\oracle\product\10.2.0\server\ne
work\admin\listener.ora
Listener Log File D:\oracle\ora10xe\app\oracle\product\10.2.0\server\ne
work\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=pz)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation
HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully
************* END OF STATUS *****************************************
NETSTAT -an results:
************* BEGIN NETSTAT *****************************************
Proto Local Address Foreign Address State
TCP 0.0.0.0:1521 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2298 0.0.0.0:0 LISTENING
TCP 127.0.0.1:2455 127.0.0.1:8080 ESTABLISHED
TCP 127.0.0.1:8080 0.0.0.0:0 LISTENING
TCP 127.0.0.1:8080 127.0.0.1:2382 CLOSE_WAIT
TCP 127.0.0.1:8080 127.0.0.1:2455 ESTABLISHED
TCP 192.168.200.49:1521 192.168.200.49:2298 ESTABLISHED
TCP 192.168.200.49:2298 192.168.200.49:1521 ESTABLISHED
<truncated>
************* END OF NETSTAT *****************************************
I found following error in SQLNET.LOG:
*************** START LOG *********************************************
Fatal NI connect error 12570, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 22-MAR-2006 17:28:59
Tracing not turned on.
Tns error struct:
ns main err code: 12570
TNS-12570: TNS:packet reader failure
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
*************** END OF LOG *******************************************

I successfully connect with XE client to another Oracle databases from LAN, including 8i and 9i databases.
But cannot connect from another machines to my XE.

Problem In Camera Of Lenovo K3 Note "cannot connect to camera"

I bought K3 Note a week ago...it showing "cannot connect to camera" error...I also installed latest system update of 17 mb.What should i do?Plz,I need fix of it.

Yes fully agree... Even the FFC( front facing camera) has its problem. The major problem if you may have noticed is that all images captured appear as mirror images i.e. things on your left appear on your right...mole on your right cheek will be on the left.... Very annoying indeed.. Hope they fix this up too...

Why I cannot connect to twitter via iPhone?

I just cannot connect to Twitter via iPhone.
It started around 6 months ago, before it was working just fine.
Important notes:
I live in China, dono need to connect to it via VPN.
Interesting thing is that in my iPad app I have no problem at all, can connect, place posts, etc.
Just in iPhone its not possible, not even connecting to the site via Safari.
Why's that? Anyone has any idea on how to solve this problem?

You have to buy Photoshop Express first. It's a In-App Purchase.
Setting>Purchases>Adobe Effect Pack
http://i1224.photobucket.com/albums/ee374/Diavonex/e6e3553e.jpg

HP 7 Voice Tab - "Camera Error - Cannot Connect to Camera"

Hi, I am facing a Error on my HP 7 Voice Tab. when i try to open camera it showing Camera Error- Cannot Connect to Camera. I bout this in December 2014. I did few trouble shott like go to Setting -Apps- Camera- Force Stop, Claer Data, Clear Chache and then reboot the tab, But Still i have same error. Even i try installed new Camera apps from google Play Store, but Still the erroe remain same. I was thinking to to do Factory Data Reset. (The last option i Have) Please let me know if there is any other solution. Thanks,Raghu

Hey @JaishalCalicut ,
Welcome to the HP Forums!
I understand you're unable to connect to your Slate 7 Voice Tab to transfer data from your PCs.
Does the VoiceTab show up in Device Manager when it is connected?
Have you recently updated to KitKat?
How long is the cable you are connecting the devices with?
Is the device in MTU mode?
Clear all cache on the tablet: Settings > Storage > Cached Data. You should have the option to erase all the cached data here.
Hard reset: While the tablet is on, press and hold the power button for 8+ seconds to force shut down. Turn the tablet back on and see if that helps.
Factory reset: Make sure you backup any important files or information first. Settings > Backup & reset > Factory data reset.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Changed apple-ID password - cannot connect to icloud via macbook air but it works on iphone and itunes..

My Ipad got stolen soon after i updated in to ios7.
the idiot i am, i did not activate find my ipad, so i changed all my passwords, including the apple-id.
now i have the following problem:
on my iphone, everything works as usual.
however, i cannot connect to icloud via my macbook air, if i type in my password (and trust me i have already changed it a few times, it always works on the phone but not on the macbook) i get the following message: "Sie konnten aufgrund eines Kommunikationsproblems mit iCloud nicht angemeldet werden." which means more or less that i could not connect to icloud due to a communication problem.
does anyone have an idea how to fix this?
thank you!
regards

Sign out of iCloud, the sign in with the new ID/ Password.

Connect two vi via internet

hello,
I have these vis and I need to establish a connection between them via internet . in LAN the data is sent . but I don't know how to connect these vis internet.
any help please and thank you very much.
I have a static ip:80.81.xx.xxx
Solved!
Go to Solution.
Attachments:
data.llb ‏102 KB

Here you go
First do this: Go to Tools>Options. Then Select VI Server: Machine Access and place * to accept allow all incoming connections.
Then, do this : Enable Web Server. Change ports according to your requirements or try with default. I normally use 81.
Then the following:
And Finally this:
Here,you can open the VI on the remote PC.
If you want to remotely control the VI through internet, then go to Tools>Web Publishing tool and select your VI, select Embedded option, and allow control. Start the web server on the remote pc and you can control this VI through internet.
Hope this helps
-FraggerFox!
Certified LabVIEW Architect, Certified TestStand Developer
"What you think today is what you live tomorrow"

Client Computer cannot connect to server over internet (VPN)

Hello Guys,
I am setting up a windows server 2012 Data centre for business purpose. I have installed & configured server with AD DC, DNS, DHCP, IIS, NPS, Routing etc.. I am able to connect client computers which is on the same domain to the server through same router.
VPN also work fine. But if I try to connect to the server via VPN through a different internet connection it won't connect. Can some one please tell me what I am doing wrong.
My Network Confg is,
DHCP IP ADDRESS FROM ISP
DHCP Disables Router, (Tried with enable)
Have my own website domain which is not linked with the server.
NAT not configured.
Thanks in Advance
Emmanual.

Hi Emmanual,
Thank you for posting in Windows Server Forum.
Can you ping to the remote server after connecting through VPN?
Did you find any specific error\event id for your case?
What’s your client OS version?
If you are not getting ping successfully then seems there is connection issue through VPN. So for this you can initially check the connection setting with following article.
You Cannot Connect to the Internet After You Connect to a VPN Server
http://support.microsoft.com/kb/317025
There are several reason as client is not getting remotely connected to server. In addition you can checl following article.
Enabling remote client access over a VPN connection
http://technet.microsoft.com/en-us/library/cc995159.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do i get video from my sony hx100 digital camera to my mac? after connecting the camera via the supplied usb cable, iMovie shows icons for 5 videos, but none will load.

i've connected the camera to the mac using the supplied usb cable. imovie shows 5 icons for videos but all of them have the red circle with slash through them and the box to import them is grayed out.

Get a nice Sony miniDV camcorder. It is not too expensive; it is small and easy to carry around to shoot your video. Most importantly, it will be instantly compatible with iMovie. You don't have to install any software, just connect it via FireWire (Sony calls this iLink) and you are good to go!
I have had several Sonys and love them. You don't need one with fancy editing capabilities because you will edit your movies in iMovie. Just be sure that it has AV In and Out so you can import and export back to the camcorder.
My current version is the small DCR HC-26. There are newer versions of that HC-30something and 40something. Look at the specs on Sony's website
Some of them require the use of a dock to import and export. I am not really fond of that feature. I like just connecting directly to the camera.

Connecting DV camera via firewire disconnects external firewire drive

All of a sudden this has started happening.
When i connect my video camera via firewire to my external Lacie harddrive, and turn the camera on, the drive I have it connected to goes off line. A window come up saying 'Device Removal'. When I disconnect the camera, the drive comes back online.
I have 4 drives connected inline and it happens to any one of them, whichever I attach the firewire to.
I trashed FCP permissions, but that didn't help. I'm running FCPHD 4.5.
Any ideas?
PowerBook G4 15 Titanium Mac OS X (10.3.9)

Its the canon camera. Firewire and canon cameras apparently don't play in the same sandbox very well. All macs have only one firewire bus. For a macbook pro you can use an express card slot, but the imac's you are kinda stuck. The best course of action is to copy to hard drive and then move it within imovie. I read this in Tom Wolksy's book on FCE. It is weird. I have a Sony HDV and an older imac and i can use one firewire port for importing and go straight to an external firewire drive--no problem. However, in his book on page 56. It states the firewire issue. I know this is an imovie forum, but i can assume its also the same for imovie.

Cannot connect to database via JApplet

Hi,
I created a Java application which allows me to send information to my mysql database using the jdbc connector via a JFrame. However when i modified the file to be a JApplet the info will not sent and i cannot connect to the database? Any particular reason for this?
I need it to be a JApplet so i can add it to a browser window.
Code: ( java )
private void save ()
Connection conn = null;
try
Statement stmt;
String userName = "root";
String password = "PASSWORD";
String url = "jdbc:mysql://localhost:3306/DATABASE";
Class.forName ("com.mysql.jdbc.Driver").newInstance ();
conn = DriverManager.getConnection (url, userName, password);
System.out.println ("Database connection established");
//Get a statement object
stmt = conn.createStatement();
stmt.executeUpdate( "INSERT INTO TABLE(Info i know to put in) VALUES('Values i know to put in')");
catch (Exception e)
System.err.println ("Cannot connect to database server");
finally
{if (conn != null)
{try
{conn.close ();
System.out.println ("Database connection terminated");
catch (Exception e) { /* ignore close errors*/ }
As i said above it works fine as a JFrame but not as a JApplet. Any help would be great.
Thanks G

Your error reporting is not good. You print a meanningless message or ignore the error.
Print the stacktrace in the catch blocks.
Change the code, rerun it and then check the Java Console for output.
I'm guessing you'll see a security error. Unsigned applets can't access the client file system. If so, sign the applet.

Cannot connect to apexlistener via SQL developer.

I cannot connect via SQL developer to my installed apexlistener (2.0.1) installed on Glassfish (3.1.2) webserver.
In the server.log from this domain i always see following error messages;
[#|2013-04-24T10:49:25.199+0200|SEVERE|glassfish3.1.2|null|_ThreadID=453;_ThreadName=Thread-2;|No pool found for: http://servername:8080/apex/oauth2/token|#]
[#|2013-04-24T10:49:25.199+0200|INFO|glassfish3.1.2|null|_ThreadID=453;_ThreadName=Thread-2;|No DB connection found for: /apex/oauth2/token|#]
[#|2013-04-24T10:49:25.206+0200|SEVERE|glassfish3.1.2|null|_ThreadID=453;_ThreadName=Thread-2;|The pool named: apex_al does not exist|#]
Help appreciated...
Regards,
Ton

Turned debug on in defaults.xml;
[#|2013-04-24T12:19:47.840+0200|SEVERE|glassfish3.1.2|null|_ThreadID=453;_ThreadName=Thread-2;|No pool found for: http://.......:8080/apex/oauth2/token|#]
[#|2013-04-24T12:19:47.840+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Could not find any database pool to use for this request|#]
[#|2013-04-24T12:19:47.841+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Applied database connection info|#]
[#|2013-04-24T12:19:47.841+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Attempting to process with PL/SQL Gateway|#]
[#|2013-04-24T12:19:47.842+0200|INFO|glassfish3.1.2|null|_ThreadID=453;_ThreadName=Thread-2;|No DB connection found for: /apex/oauth2/token|#]
[#|2013-04-24T12:19:47.844+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Not processed as PL/SQL Gateway request|#]
[#|2013-04-24T12:19:47.844+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Attempting to process as a RESTful Service|#]
[#|2013-04-24T12:19:47.863+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Default Database connection does not exist|#]
[#|2013-04-24T12:19:47.952+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Choosing: oracle.dbtools.rt.oauth.TokenHandler as current candidate with score: Score [handle=null, score=0, scope=SecurityConfig [constraint=secure, realm=OAUTH_CLIENT, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true]|#]
[#|2013-04-24T12:19:47.954+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Determining if request can be dispatched as a Tenanted RESTful Service|#]
[#|2013-04-24T12:19:47.954+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Request path has one path segment, continuing processing|#]
[#|2013-04-24T12:19:47.955+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|No JDBC Principal established, cannot dispatch|#]
[#|2013-04-24T12:19:47.956+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Chose oracle.dbtools.rt.oauth.TokenHandler as the final candidate with score: Score [handle=null, score=0, scope=SecurityConfig [constraint=secure, realm=OAUTH_CLIENT, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true] for: POST oauth2/token|#]
[#|2013-04-24T12:19:47.960+0200|SEVERE|glassfish3.1.2|null|_ThreadID=453;_ThreadName=Thread-2;|The pool named: apex_al does not exist|#]
[#|2013-04-24T12:19:47.965+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|oauth2/token authorized as: IsZv_-R511-vq79m880SQA..|#]
[#|2013-04-24T12:19:47.965+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|must be accessed over https only|#]

E4200v2 - Cannot connect IP Camera w/ WPA-PSK

I recently puchased a new E4200v2 router and one of the devices that I have on my network is a Level1 WCS-2040 wireless network camera. My old router was a Netgear WPN-824. I was able to (and I'm still able to) connect the camera to the Netgear router with WPA-PSK but not to the new E4200v2. The only way for me to connect it to the new router is with WEP, which I obviously do not want.
I'm at a loss for what the problem is because the setup is easily done. I'm thinking it's an issue with the E4200v2 but I'm not sure what... hoping that the issue could be resolved in the next revision of the firmware. I've tried WPA2/WPA Mixed Mode, WPA Personal (which I understand is the same thing as WPA-PSK) and WEP. The camera supports WEP and WPA-PSK. When I have the camera configured with WPA-PSK it simply isn't connecting to the E4200v2, only the old netgear.
See screenshots below:
Netgear router wireless config:
Netgear router connected devices (shows laptop and wirelss camera):
IP Camera config while connected to old router:
IP Camera working on old network:
E4200v2 wireless status:
IP Camera config while connected to E4200v2 router (via wired connection, not wireless):
When the wired connection is removed from the camera and powercycled, the E4200v2 does not list the camera as a connected device. I've power cycled everything, multiple times and tried everything I know of. What could be the problem? Note that the MAC address for the camera is the same for both wired and wireless adapters. Not sure what to do, any help would be appreciated. And no, Password1 is not my default password... just what I was testing with for the purpose of screenshots.
Regards,
Henrik Gustavsson

The camera does not support WPA2, only WPA-PSK (TKIP) and WEP. That being the case, I've tried it with the router in WPA2/WPA Mixed Mode and WPA Personal. No dice... Still only works with WEP. Works with WPA-PSK on the old router just fine, just not the E4200v2.

Since updating to Leopard can't connect to server via internet

Since updating our server to Leopard I haven't been able to connect to it via the internet from home. Any ideas? Says verification failed when I try to re-add it. Ports 3283 and 5900 are open at both ends.
Edit: I just managed to access it using the root account. Any ideas why it's not working with the other admin accounts via the internet (they work when I'm local)?

It appears that the adding a user to the "allow access for" list corresponds to adding group membership, in the group "com.apple.access_ssh".
So, one way of brute-forcing a user into this list would be to add it to the group. One way of doing this at the command-line:
sudo dscl . append /Groups/com.apple.access_ssh GroupMembership whatever-my-admin-account-is-called
This will require a password and only work for people with sudo permission, natch.
CAVEATS:
1) I have no idea what you mean when you say "local" users. What distinguishes the "local" users from the others?
2) I do not know where the OS stores the information about whether or not the "All Users" radio button is checked. I just checked to see whether checking this box adds all users to the com.apple.access_ssh group, and I confirmed that it does not.
Message was edited by: John Clements

Cannot connect to camera via internet

Similar Messages

Maybe you are looking for