Cannot connect to car stereo after 4.3.5 update

After I updated my Iphone4 (4.3.5) I cannot connect to my vehicle stereo.
Is there a fix for this?

I'm guessing your stereo supports A2DP bluetooth audio streaming. If so, what's happening is the phone is routing the audio to the last connected interface. You are plugging it in via the headphone jacke BEFORE the bluetooth connection is complete. When the bluetooth locks in, it starts routing audio out via A2DP instead. WAIT until the bluetooth connection is complete and then plug in the aux cable if that's the way you want to do it.

Similar Messages

IPhone 4s No Longer connects to Car Bluetooth after iOS 7.1 Update

My iPhone 4s has been paired to our 2006 Acura TL hands free link (Bluetooth) and working flawlessly for more than a year. After the iOS 7.1 update installed on my iPhone the connection has been lost and the car's Bluetooth does not recognize, and will not pair with my iPhone anymore! I noticed there were two back-to-back updates for iOS7. The first one caused intermittent interruptions and lost connections with the iPhone. The second update completely destroyed the connection between the car bluetooth and the iPhone. Any ideas on how to correct this problem would certainly be appreciated. Thanks!

Hello algee1,
Thank you for the details of the issue you are experiencing with pairing your iPhone with your Acura.
In my experience, when updates are released for iOS devices, compatible devices release an update to maintain compatibility. Step 2 from the article below recommends checking with the manufacturer of your car stereo to see if there is a firmware update available for your car stereo:
2. Update software and firmware if necessary
Verify that both your car stereo and your device have the latest software versions. Contact the manufacturer to see if any updates are available. If your device does not have the latest version of the iOS, update to the latest software version.
I recommend reviewing the full article here for additional troubleshooting steps:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
I also recommend these steps if the issue persists after following all the steps in the previous article:
Unable to find nearby Bluetooth accessories
If a pairing record already exists, the device does not appear as discoverable. Try to connect the device using that pairing record.
If you are unable to connect using the existing pairing record, delete the record and pair again.
Ensure that the firmware or software on the Bluetooth accessory is up to date.
Ensure that the Bluetooth accessory is charged or connected to power.
Verify that the Bluetooth accessory is using a profile that works with the iOS device.
Turn off both the iOS device and the Bluetooth accessory, then turn both devices on again.
If the issue persists, test Bluetooth with another device or consult the manufacturer's documentation.
You can find the full article here:
iOS: Third-party Bluetooth headsets, headphones, and keyboards
http://support.apple.com/kb/ht1664
Thank you for using Apple Support Communities.
Best,
Sheila M.

Cannot connect to iCloud server after 10.9.4 update.

Attaching EtreCheck information. Connection doctor states: Could not connect to iCloud iMap server. Restart of mail did not work. Reboot of computer did not work.
Thank you for any help you can provide.
EtreCheck version: 1.9.12 (48)
Report generated July 19, 2014 at 10:06:48 AM MST
Hardware Information:
iMac (27-inch, Late 2013) (Verified)
iMac - model: iMac14,2
1 3.5 GHz Intel Core i7 CPU: 4 cores
32 GB RAM
Video Information:
NVIDIA GeForce GTX 780M - VRAM: 4096 MB
iMac 2560 x 1440
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:41
Disk Information:
APPLE SSD SD0128F disk0 : (121.33 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 120.99 GB
Boot OS X (disk0s3) <not mounted>: 134.2 MB
APPLE HDD ST3000DM001 disk1 : (3 TB)
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 3 TB
Recovery HD (disk1s3) <not mounted>: 650 MB
USB Information:
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
HP Photosmart 6520 series
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.philips.iokit.DLconnect (85 - SDK 10.4) Support
[not loaded] com.roxio.TDIXController (2.0) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.parallels.mobile.dispatcher.launchdaemon.plist Support
[loaded] com.parallels.mobile.kextloader.launchdaemon.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.fujitsu.pfu.ScanSnap.AOUMonitor.plist Support
[running] com.newwellnesssolutions.DLconnectMonitor.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[loaded] com.parallels.mobile.prl_deskctl_agent.launchagent.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.parallels.mobile.startgui.launchagent.plist Support
[running] jp.co.pfu.ScanSnap.SearchablePDFConverter.plist Support
User Login Items:
iTunesHelper
Dropbox
ScanSnap Manager
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.10 Support
AdobePDFViewer: Version: 10.1.10 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 60 Check version
Safari Extensions:
Save to Pocket: Version: 1.9.1
Open in Internet Explorer: Version: 1.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Java Support
Time Machine:
Auto backup: YES
Volumes being backed up:
Destinations:
Data [Network] (Last used)
Total size: 3
Total number of backups: 55
Oldest backup: 2014-01-26 04:43:07 +0000
Last backup: 2014-07-19 15:22:17 +0000
Size of backup disk: Excellent
Backup size 3 > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      1% WindowServer
      1% fontd
      1% SearchablePDFConverterOCR
      0% dpd
Top Processes by Memory:
295 MB Mail
164 MB mds_stores
164 MB CalendarAgent
131 MB com.apple.IconServicesAgent
131 MB ScanSnap Manager
Virtual Memory Information:
27.47 GB Free RAM
2.37 GB Active RAM
433 MB Inactive RAM
1.74 GB Wired RAM
419 MB Page-ins
0 B Page-outs

Restart the router and the broadband device, if they're separate. If there's no change, see below.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Cannot connect with APPLE TALK After 10.4.7 update

There's a very very strange error happened when I tried to connect to my MacBook or vise versa. It gives an error like this:
CONNECTION FAILED
This file server is running on your machine, Please access the volumes and files locally.
This happens right after I had upgraded BOTH the iMAC and MacBook to 10.4.7.
Please Help

Hello,
I know it sounds absurd but that is what happening....but I have it fixed. I switched off file sharing on both machine and turned them back on and suddenly they know they are not on the same planet again.....weird:-)
Thanks anyway for your quick response.
Albert

Connection to Car Stereo

I have an ipod connection into my car stereo in my Infiniti. I was hoping to replace my ipod with my Blackberry Storm and be able to play it through my stereo system. Is there a cable that will fit my car connection and the Storm?

First, I don't know what type of connection your car stereo has, but as for me, I am using a simple male 3.5mm to RCA jack cable (See link below) for my car and it works wonderfully.
http://www.buy.com/retail/product.asp?sku=203945380&listingid=32518714&dcaid=17902
Message Edited by enzo_mmx on 12-10-2008 12:46 PM

I cannot connect to the Internet after installation of Windows Vista Ultimate edition.

I cannot connect to the Internet after installation of Windows Vista Ultimate edition. For some odd reason, it seems my ethernet has not yet been installed to my operating system and I do not know how to do that even with the internet, I have the LAN cable hooked up to my computer but I do not know exactly what to do about it. Is there some sort of driver I need to install, or what? How do I do that without the internet?
This operating system is on a separate partition to my other operating system that is connected to internet already (Windows Vista Premium) that I do not wish to use anymore because of it's corruption. I tell you this because you may know a way of finding the driver files on my previous operating system that I may be able to transfer to the other.

In order to avoid board clutter, we ask that you post your topic on one board only.
Please look ---> HERE for replies to your topic. Thank you.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Cannot connect to app store after downloading mountain lion

cannot connect to app store after installing mountain lion it says there is no network connection when there clearly is i am on the internet now and i had this problem with the bootcamp server i read that in another forum and the answer to remove the auto proxy setting was correct but not for this situation because it is allready unchecked i checked it and tried again still no connection please help .... oh and apple you are beginging to be more like windows/microsoft with all the problems

That poor wordpress site has collapsed in exaustion from trying to keep up with the 3mil hits a day
here is a "copied" version with credits for those looking for a solution to an annoying problem Apple should patch. (Yes, I'm aware of the irony of that statement)
July 18, 2012 · by Arthur Lockman · in Apple, Tutorials
After doing a reinstall of Lion a few weeks ago, I found that my computer suddenly would reject every VeriSign certificate that it encountered. Using Chrome, that meant that I couldn’t even access Twitter.com, because it thought that the certificate was wrong. I couldn’t login to the Apple developer portal, I couldn’t authenticate a device with XCode, I couldn’t make a purchase at Apple.com, I couldn’t download updates from the Mac App Store, and I couldn’t login to Mint.com, among other sites. I essentially couldn’t do anything that used a VeriSign certificate for SSL.
What did I do? I called my trusty AppleCare advisor, hoping for an answer. I thought that maybe they could help me figure it out. After getting to senior support, I was told to reinstall Lion, which I did to no avail. My case was then forwarded to the Apple engineering team, with 3 to 5 days to wait until I had an answer. I looked around, through my console logs and through Keychain access, and finally came up with an answer, and a solution to my problems.
It turned out that my solution was pretty simple. I had to delete a few files and reset one to its default setting.
Delete the files /var/db/crls/crlcache.db and /var/db/crls/ocspcache.db. These can be found using Finder’s Go >; Go To Folder menu (Cmd + Shift + G). This resets the cache of accepted certificates in the system. It doesn’t remove them, it just forces the system to rebuild the caches upon restart.
Open Keychain Access (/Applications/Utilities/Keychain Access). Select Certificates in the Category picker on the left side. In the search bar, type in the word Class. Look through that list, and find any certificates that have a blue + symbol over their icon. These are the ones you need to modify.
Select one that has a blue +, and hit Command + I. Click the disclosure triangle beside the “Trust” list to show the list of permissions. Now, what we need to do is to set this certificate to use the system defaults. However, for some reason, when you select it, it doesn’t save. So what you need to do is this. Under “Trust”, where it says “Secure Sockets Layer (SSL)”, change the dropdown menu to say “No Value Specified”. Then, close the window. It will ask for your administrator permissions. Then, open the info pane for that certificate again. Under “Trust” again, now set the dropdown that says “When using this certificate:” to say “Use System Defaults”. You can then close out of the info pane, and enter your password again. Do this for any of the certificates that have a blue + on their icon. There should only be one or two at most.
Restart your system.
This solution seemed to work just fine for me. All of my certificate problems have been fixed. It must be something with the OSX installer that causes this certificate issue. I’ll file a bug report. Hopefully someone looks into it and fixes the flaw in the OS. And, I hope that this fixed the flaw for you.
Addendum – a note on security:
This procedure won’t affect the security of your Mac. I’ve had some questions come in about that, and if anything, it makes it more secure because then sites that require SSL certificates can actually use them, unlike before where they might default to non secure connections because the certificate was bad.

I cannot connect to the internet after switching providers. I've changed the email address associated with the new account but am sure there is something else I need to change. Can anyone help me?

I cannot connect to the internet after switching providers. I've changed the email address associated with the new account but am sure there is something else I need to change.   I have also changed the apple information as well including user name and password. Can anyone help me? (This is an ipad question).

Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
iOS: Changing the signed-in iTunes Store Apple ID Account
http://support.apple.com/kb/ht1311
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT4623 I cannot connect to my wifi after updating to iOS 6

I updated my iPhone 4s to iOS 6. I cannot connect to my wifi after updating to iOS 6. I updated while connected to iTunes. I can no longer connect to the wifi that I had previously used at that location. However, I can connect to all of the other wifi areas I had previously connected to ie. home, coffee shop, etc.
I have tried turning off cellular data.. Other than not being able to connect to my office wifi it appears that iOS 6 is working properly..
Thank you in advance for your assistance

I have the same problem too and I have not been able to "fix" it. It is very frustrating! My other electronics connected to my wifi: pc, ipad, iphone 3G,and TV they all working fine. I went to the Apple store and they say this problem is ralated to my network provider, then when I went to AT&T they say it is Apples problem. Who do you believe?
Luis

Cannot connect to itunes store after update

I cannot connect to itunes store after downloading latest update. I have tried everything list in "support" including flushing, etc

My problem appeared after upgrading to itunes 8.
"itunes could not connect to itunes store"
"Make sure network connection is active and try again"
Norton was the problem ....
-open Norton
-Select "Internet Security", then "Status & Settings"
-Select "Personal Firewall", then "Programs"
-Scroll down to itunes
My situation had itunes Internet access set to
"block all" I changed this setting to "permit all"
Hope this info helps you out ... Happy Holidays

Need help...my Ipod touch 2, cannot connect to App store after jailbreak

Need help..my Ipod touch 2 cannot connect to App store after jailbreak then restore to 4.2.1? thank you in advance..

Try restoring again.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Canon camera no longer connects to Macbook Pro after 10.4.7 update

Has anybody gotten word from Apple on this issue yet? My Rebel XT/350D stopped connecting to my MBP after the latest software update. It has stopped working with iPhoto, Image Capture and Capture ONE. If I put the CF card in a USB reader, it is recognized (occasionally) as a removable disk.
What gives?

CZ:
Did you update the system via the Software Update? If so then download the 10.4.7 COMBO updater and run it. There are some files it's reported, that are left off the incremental updater and the combo one will fix some of the problems that causes. Not sure your problem is one of them but it's work a try. Don't forget to repair disk permissions afterward.
Do you Twango?

My ipod says "cannot connect to itunes store" when i go to update my apps using wifi

i need help because my ipod says cannot connect to itunes store when i go to update my apps using wifi

Can you access other webpages via Wi-Fi?
If yes, did you check your security software settings?
iTunes for Windows: Troubleshooting security software issues

My IPad says "cannot connect to iTunes store" when I try to update

My IPad says "cannot connect to iTunes store" when I try to update apps. How can I resolve this?

I had the same problem and tried absolutely everything...on my own and stuff I'd read on-line. Nothing worked. What finally did was this. I held down an app until all started jiggling. Then I deleted one of the ones that needed updating. Then pushed the round button at the bottom of the iPad to stop the movement. Then went to the "Featured" section of the App Store. In the search box (top right corner) I typed in the name of the app I'd just deleted. When it pulled up, I chose "Install". Worked perfectly. I went through this process, one-by-one, until I got all of them done. Now, everything is updated.
Sure hope this helps you and hope this isn't the new norm for how to do updates. I used to just select "Update All", entered my password, and the updates started happening.

ITunes tells me there is an update (5.1) but it never gets any further than trying to connect to the iPad server. I've tried updating directly from my iPad and it too times out saying it cannot connect to any server. My regular Apple updates work fine.

iTunes tells me there is an iOS update (5.1) but it never gets any further than trying to connect to the iPad server. I've tried updating directly from my iPad and it too times out saying it cannot connect to any server. My regular Apple updates work fine.

I haven't updated yet. Apple's download servers have been too busy. Did you know you can update via wifi instead of connection to your computer?
Here's a description of the update. Not a lot of changes for iPad 1/2.
iOS 5.1 Software Update
http://support.apple.com/kb/DL1504
You can wait a while & update at your convenience.
 Cheers, Tom

Cannot connect to car stereo after 4.3.5 update

Similar Messages

Maybe you are looking for