Cannot connect to Cisco WebEx meeting with Safari 5.1.9 / 10.6.8

I'm trying to join an Internet meeting which is running through the Cisco WebEx system. When I click on the meeting url, it takes me to a login page; I enter my name & email, click the Join button, and go to a page that says "One Moment Please…" And stops; it goes no further.
If I drag the url to Chrome, it goes through the same routine to "One Moment Please…" then after one moment the "Cisco WebEx Meeting Center" software (previously downloaded and installed) opens, and I'm in the meeting okay.
Same positive result with Firefox.
But Safari won't do it. I discovered that Java (which is used by the Cisco software) was turned off in Safari, so turned it on; no help. I reinstalled Safari (5.1.9), Java (update 15), and the latest Security update. No help. Chrome and Firefox still work, but not Safari.
Of course I could use Chrome or Firefox, but after being an Apple loyalist for 25 years, my first choice of course is Safari… though I'm beginning to wonder why, with all the constant "Web pages must be force reloaded" and spinning beachballs it's been giving me.
I was on the phone for an hour with a knowledgeable and helpful Cisco rep, who in the end was as stumped as I was. Everything works, but Safari.
(Btw, I found a Discussion from 2009 which suggests "WebEx uses VERY OLD APIs and will not run in 64-bit Safari. For now, use Safari in 32-bit mode or just use Firefox to launch WebEx." Tried that, didn't help. Presumably WebEx has be updated in the last four years.)
Anyone have any ideas?

I'd use that terminal command - takes seconds (and a restart) + no download. But otherwise yes - the 10.6.8 v1.1 then the update & anything else software update picks up (not safari, obviously )
Some people happily get a copy of just the safari 5.0.5 application & use that, since apparently it works, although I'm not sure what cookie function you'll get (easy enough to see). You'd use Pacifist to extract it from the 5.0.5 installer package, or grab it from a backup.
Although you'd hope software update would catch the security change - I'm not sure if the combo would overwrite the new or not... on the one hand, it's newer, but on the other, it sure over-wrote safari 5.1 when i checked it... so better to be sure, I haven't checked since that update.
If you look at the files in /System/Library/Keychains/ afterwards - if EVRoots.plist, SystemRootCertificates.keychain, and SystemTrustSettings.plist are all dated 23 April 2011, the combo rolled them back - if they're later... it didn't.
Apple do know, since bug reports come back as 'duplicate of...' - but  there's no public info to my knowledge.
How much of a security issue is this? Should I worry about it, or just leave it until they update to fix?
more privacy than real security, I'd say - although there are add-ons to manage cookies.

Similar Messages

  • Want to playback archived webcast recorded using Cisco webex recording. Downloaded Cisco webex meeting software from apple download page but still cannot play recording

    Want to playback archived webcast recorded using Cisco webex recording. Downloaded Cisco webex meeting software from apple download page but still cannot play recording

    You will probably find better support about the features of the Webex app on their support page here: http://www.webex.com/products/web-conferencing/mobile-iphone-ipad-faq.html
    Doesn;t look like it's listed as a feature of the iPad app.

  • HT1212 my ipad just died.  When i hook up to my computer on itunes it says cannot connect because it is locked with a passcode.  i know my passcode but nothing is coming on, the screen is just blank and it is was fully charged

    My ipad will not turn on.  It was fully charged before it just died and would not turn back on.  When I hook it up to my computer on itunes it says cannot connect because it is locked with a passcode.  I know my passcode but the screen is just black, no power, so I cannot enter a pass code.

    FORCE IPAD INTO RECOVERY MODE
    1. Hold Sleep/Wake button down and slide to turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...

  • Cisco Webex Meeting Server v2.5 Certificate Type

    Dear Team,
    We have installed Cisco Webex Meeting Server v2.5 and we need to but a public CA.
    i have created the CSR file (Using SAN) and i sent to the CA vendor but they asked my about the certificate type.
    Cisco or Tomcat or what?
    i have searched in Admin and Planning guide but i didn't find the answer.
    Apprentice your answer.
    BR,
    HS

    Hi HS,
    Apache/Tomcat cert is what you need.
    Kind regards,
    -Dejan

  • IPod is in Recovery Mode and when I Try to connect my itouch it says it cannot connect because it is locked with a password, but I cannot unlock it since it is in recovery mode! Help!! Pleaseee

    iPod is in Recovery Mode and when I Try to connect my itouch it says it cannot connect because it is locked with a password, but I cannot unlock it since it is in recovery mode! Help!! Pleaseee

    Try putting it in DFU mode and then restore.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Cannot connect to Cisco WiFi...?  Anyone else?

    I cannot for the life of my connect to my office Cisco 1252 Lightweight AP. I have tested with virtually every setting, including a basic broadcasted SSID of "test" with no security. I always get a "cannot connect to the wireless network" error message. No other machine in the office has a problem connecting to this AP.
    I have another "regular" Cisco AP and I can connect to that one just fine.
    BTW, the iPhone sees the "test" SSID (listed visibly), but it will not connect.
    Anyone running into any of these issues?
    Thanks,
    Ed

    If you have posted about this previously, I may have answered already, but there is also another discussion about this going on currently and you can see if there is anything new in it that you haven't tried already.
    https://discussions.apple.com/thread/4233102

  • Cannot log in to Google "Accounts" with Safari

    I cannot seem to login and use Google Services with Safari 2.04.
    This started when I discovered I was unable to log in to google calendar in Safari, and became a support ticket to Google (which is still pending) and is really confounding me.
    What happens is that I go to go to http://www.google.com/accounts and attempt to login. Once I hit the submit button, accounts page plainly refreshes. However, if I put in a totaly invalid user or password, I will get a message telling me the user or pass is invalid.
    In Firefox, if I attempt the same scenario from google.com/accounts, after submit, I get the page that shows me all the services available for me to use, like gMail, calendar, etc.
    Here's what I've already tried.
    Safari troubleshooting...
    - backup/remove ~/Library/Safari
    - backup/remove ~/Library/Caches/Metadata/Safari
    - backup/remove ~/Library/Caches/Safari
    - backup/remove ~/Library/Preferences/com.apple.internetconfig.plist
    - backup/remove ~/Library/Preferences/com.apple.internetconfigpriv.plist
    - backup/remove ~/Library/Preferences/com.apple.Safari.plist
    - backup/remove ~/Library/Cookies
    After removing all the above, Safari is basically back to Apple's factory default settings. Even after all this, Safari still cannot log in. The same behaviour occurs when I hit the submit button, I'm just brought right back to the same page I started at, and am not logged in. Calendar never renders, or I'm left looking at the accounts log in screen.
    It's notable that this issue does not appear to be specific to my google account, but specific to one particular Mac I use. I am able to login to google/accounts on my laptop, but not on my office machine using Safari.
    To make it even more mind numbing, it seems to be specific to a user profile on my office Mac. I tried creating a new user account on this same machine, and with the fresh clean home directory, was able to login to google accounts, calendar, etc. So, obviously, a totally clean home directory, library, app support, etc results in usability.
    I'm not sure where else to go with this. Are there other supporting files to Safari within my home directory that I missed removing to set it back to "clean". I cannot imagine the problem being specific to the application bundle for Safari since each user on the computer is using the same one, this behaviour must be related to something within the user home directory somewhere.
    Anyone else seen this same behaviour and know how to fix it, preferably without just creating a new user and home dir.
    -jim-

    Hello Jim,
    Check your router for firmware updates,not being able to sign into only 1
    or some sites has been a symptom for some users see this topic,
    http://discussions.apple.com/thread.jspa?threadID=635607&tstart=500
    The other thing to check for is a firewall on your router that may need
    adjusting.Are you using Net Barrier?
    Post back & let us know, how you fare.
    Eme
    P.S you did make sure to QUIT Safari before removing the cache folder
    etc.. correct, if it is not QUIT it will recreate the same corrupt, files & or folders.

  • My Ipad 2 says its connected to my wifi but when i try to go ontofacebook it says I cannot connect and when i try on safari it says I am not connected to the internet. Yet on settings it says I am. Any help?

    I recently got an IPad 2 and when I first set up the wifi connection the safari and facebook worked but suddenly whenever  I  attempt to get onto facebook it says Unable to connect and whenever I go on safari it says I am not connected to the internet. yet when I go on settings-- Wi-fi The network I should be cnnected with is ticked and it says I have connection, but once i try to go on the internet I have the same problem. Is there a way I can solve this by resetting or do I need to go into the apple shop to get it sorted. Any help? Thanks.

    I recently got an IPad 2 and when I first set up the wifi connection the safari and facebook worked but suddenly whenever  I  attempt to get onto facebook it says Unable to connect and whenever I go on safari it says I am not connected to the internet. yet when I go on settings-- Wi-fi The network I should be cnnected with is ticked and it says I have connection, but once i try to go on the internet I have the same problem. Is there a way I can solve this by resetting or do I need to go into the apple shop to get it sorted. Any help? Thanks.

  • HT5569 cannot connect to wi-fi network with my 2nd gen itouch even after following most troubleshooting solutions; have 3 other devices that connect with no problem (using wndr3700v3 dual router)

    cannot connect to home wi-fi connection with my 2nd gen itouch even after following most troubleshooting solutions. i have 2 5-gen itouch ipods and a kindle fire hd 8.9 that can connecto to my wi-fi network and even download from my e-mail accounts with no problem. it had no problem connecting with my old a/b/g netgear router nor the first time i installed my new netgear wndr3700v3 router. since then, no connection. don't know what happened.
    help

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar
    Could it be this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • Cannot connect to Lacie Ed Mini with new Airport Extreme BS

    I've just bought a new AE and cannot connect to my Ed Mini when its connected to an ethernet port when using an XP PC. I'm using the AE in bridged mode (temporarily) but I'm not sure if this is preventing being able to connect to the drive or not. Help!! any ideas? thanks in advance.
    Windows XP Pro

    Thanks Stuart, nice set up!
    I listened to your advice and it worked!!!! They are both synced up, however somewhere in the setting I seem to get some problems.
    I can use both Desktop(LAN only) and Imac (wireless only) to play Airtunes however I realized that the Imac is surfing the net using the Airport Express rather than the Airport Extreme. Hence a very slow surfing experience.
    I went back into the Airport Express and set to join an existing network and tried using a different name, so the Imac won't use the Express to do the surfing. Upon resetting the Express, the green light is active which is good news but now I cannot play Airtunes on both my machines. So I guess even with the green light, the Extreme and Express are not linked up. Am I right?
    Furthermore I can get my Imac to use the Extreme to surf the net which is ideal but have the problem where I cannot play Airtunes with Express. I think it's because Express is not linked with my Extreme base station.
    What I want is for both machines to surf the net at normal fast speed using Extreme, and for Itunes to connect to Express via Extreme and play my music using Airtunes so I can get great music out on my HiFi.
    Any solutions, or settings I need to do? Much appreciated for all feedback from members here.
    Thanks!

  • Cannot connect to Internet wirelessly or with wired connection

    Hi!
    I have a wireless linksys router connected to a wired linksys router (for vonage). My PC is wired to the wireless router and works fine. My Powerbook G4 was working fine on the wireless network too.
    Then, I decided to try to add an Airport Express just for streaming music (it is not wired to the wireless router). I have messed something up. Now, even with the AE unplugged, I can log onto the Linksys network, but the Internet connection does not work. Also, when I Turn Airport Off and wire directly into the router from my G4, I cannot use the Internet.
    I've restarted everything I can think of. Any ideas?
    Thanks!

    Sounds like you need to restart the modem and hard reset the Linksys router which is connected to it. Then reconfigure that Linksys router and verify connection (Ethernet and/or wireless). After you get that setup you can add the other devices.

  • I cannot clear history without clearing cookies with Safari 8.0

    I have the new Safari 8.0 with OS X Yosemite. I can not clear history without also clearing cookies. With Maverick it was possible to clear history and keep cookies, not now. This is NOT an improvement! Is there a way to keep cookies and clear history?

    this is absolutely the worst period of apple I've ever experienced. and I've worked with them since apple iic.
    iOS 8 made my working phone a wreck, and then they take down the option to (downgrade) fix it.
    yosemite has left with me a computer that cannot do anything. bluetooth is broken and causes audio delay.
    there is constant video delay cause of system wide slow down. my system cache is overflowing constantly
    since upgrading, i am continously throwing away trash just to keep the system working.
    no mail notifications so i have to leave the mail program open all the time which also causes system slowdown.
    this is the worst heap of junk they ever "sold" on us. i had working machines, after i did what they said would be fine i now have 2 piles of wasted money.

  • Cannot download application loader 3.0 with safari

    I'm using an iPAD Tablet with iOS 5.1.1. I'm trying to submit an app for review but I'm required to download the application loader 3.0 but when I download I'm getting a prompt that says safari cannot download file. I would appreciate any assistance.
    Thanks!

    iOS devices cannot download applications using Safari. The only applications that can be downloaded are in the App Store app. The application your Mac.

  • Cannot connect to my Internet or work safari!

    Hi,
    Last month I purchased a MacBook Pro running OS X 10.8.3 with the intent of being able to Skype and have Internet access on my deployments. Within the past couple days I've experienced a random haunt to all abilities in accessing the Internet. My battery died completely and the next morning I plugged it in and tried to use it as per usual. Safari kept bringing me to a page that showed that I was not connected to the Internet and that my computer is offline. After trying network diagnostics, trying to change wifi networks and even restart or forget networks and keychains (all with no avail), I called apple. I saw a lot of comments about the airport utility on other forums, but since i have never used that, i don't feel like that is the problem. Apparently they want to charge me $100 to reconfigure my network when I don't even know if that is the issue! I'd greatly appreciate any ideas you guys have! Let me know if you need any additional information, thanks in advance!
    -Zack

    Bring it in to an Apple store and have them show you how to connect to the internet. You may have a problem with your modem, router, ISP or all.

  • My touch shows the connect to itunes with usb on screen however when i try to do so it says it cannot connect because it is locked with a passcode. It will not let me enter the code on the ipod or computer. so i cant do anything. Any ideas?

    I have tried rebooting it. nothing seems to help. it always ends up with the same screen a picture prompting me to hook up via usb to itunes.Then without fail i get an error message. itunes connpt connect to the ipod touch because it is locked with a passcode. you need to enter the passcode on the ipod touch first. unfortunately the touch will not show any other screen but the connect to itunes.

    Connect the iPod touch to your iTunes library in Recovery Mode and restore it to factory setting.  See this article for instructions on getting your device into Recovery Mode.
    http://support.apple.com/kb/ht1808
    B-rock

Maybe you are looking for

  • How do you know what Mac Mini version you are getting?

    I heard that as of September 2005, Apple had completly updated there Mac Mini's.. I heard that they put in a 64mb 9200 Graphic Card, and all had Bluetooth and Airport.. But, how would I know that what I am getting is the updated version? Compusa's Ma

  • Excel problem in abstract portal component

    Try below code to output Excel. OutputStream out = response.getOutputStream();                     response.setContentType("application/vnd.ms-excel");                     response.setHeader(                          "Content-disposition",           

  • Stop at error in SAP new debuggger

    hello friends, I am having error in creating a sales order. In debugging, Can I stop at where the error is occuring. I am using new debugger. I want to stop cursor at the point where it is creating a error. thank u . madhu

  • Music doesn't loop seemless

    Hi to all and thanks for this forum. I'm almost new to Encore (have 2.0). I created a nearly 8 seconds audio to loop very well and put it in the start menu. I loops, but each time it loops I notices something like 1 o 2 seconds of silence. Any help w

  • Choosing only a selection of String from BufferReader/downloading images

    I'm trying to write a program to download images from a webpage (basically it's a slide show, with links to the next/previous photo).. I am trying to automate it so that it will automatically load the next link, download the next image, until there a