Cannot connect to EDGE

Have had iPhone for one week and have never connected to EDGE - only ask for WiFi connection. Can someone tell me if there is something I need to do to have device connect to WEDGE - very frustrating as I cannot get email, etc, unless I am at home or office where WiFi (and laptop!) are available.

So I assume you never see the blue square with the E in it next to your signal strength. There is nothing to do for you to connect to Edge, it does it on it's own if there is Edge coverage where you are.
If you are not seeing the E (or as you say, no internet features work when not on WiFi) I would call AT&T and ask.

Similar Messages

Iphone cannot connect to EDGE

Ever since updating to version 1.1.2 access to EDGE is intermittent. It will work for awhile, then the "E" disappears and I can't send/receive email or browse on Safari. The only way to re-connect to EDGE is to turn the phone off and restart it.
I took the phone to the Apple store and they say that AT&T is upgrading the EDGE network up and down the West Coast and some towers are down, so when usage is high some users can't connect. I don't know whether to believe this for the following reasons: I see no posts about this problem here; the problem started right after installing version 1.1.2; I had also just installed Leopard on my MacBook; and I have a friend whose iPhone is working perfectly (her MacBook is still running Tiger).
I have reset the iPhone 3 times. That hasn't helped.
Is anyone else having this problem?

I have had this problem, and what I believed it was, was when my iPhone is trying to connect to WiFi networks, the E will disappear until the phone has a dedicated connection, and is no longer in the search and connect phase.
I could be wrong, but try to turn your WiFi off on your iPhone, it works for me.

Cannot Connect to YouTube on WiFi or the EDGE network.

On one of my iPhones I get the message:
"Cannot Connect to YouTube"
I've been having this problem since Friday, 6/29/07. The YouTube Icon has never worked on my problem phone.
I have 2 iPhones on the same AT&T account.
One works the other does not - any reason when I tap the YouTube icon I get the message "Cannot Connect to YouTube"?
I have tried this on the EDGE and WiFi networks.
The Stocks, Weather and Safari work fine.
Gateway Windows XP
Gateway Windows XP

SOLUTION:
The solution for my issue was to run a RESTORE on the iphone. I first confirmed that my iphone BACKUP was current. I did the aforementioned per the Apple representative. It took about 20 minutes.
ORIGINAL ISSUE:
On one of my iPhones I get the message:
"Cannot Connect to YouTube"
I've been having this problem since Friday, 6/29/07.
The YouTube Icon has never worked on my problem
phone.
I have 2 iPhones on the same AT&T account.
One works the other does not - any reason when I tap
the YouTube icon I get the message "Cannot Connect to
YouTube"?
I have tried this on the EDGE and WiFi networks.
The Stocks, Weather and Safari work
fine.
Gateway Windows
XP
Gateway
Windows XP
Gateway Windows XP

Cannot connect to Mac 10.8.4 with Edge Inspect

I have Edge Inspect CC installed on my Computer, in Chrome and on my iPHone. I am signed in to Inspect according to the icon in the menu bar. My phone can see my Computer but cannot connect using the IP address. The Chrome Extension however says to "please start Edge Inspect" and I am not seeing the Edge icon in the Dock. So I think the thing is not activating... I seem to have the latest CC install, but I don't see a way to uninstall with the app manager and resinstall...
BTW, I don't know how or which type of port to open or find out if access is available on in Airport. I'm on a local network. The computer is connected by ethernet to the router, the phone is connected via WiFi to the network, and I've turned of NetBarrier... .

Netstat does not show anyone trying to use that port.
Here is the Console message in CHrome
Uncaught SyntaxError: Unexpected token u background.html:1
Uncaught SyntaxError: Unexpected token u background.html:1
Uncaught SyntaxError: Unexpected token u background.html:1
Uncaught SyntaxError: Unexpected token u background.html:1
Uncaught SyntaxError: Unexpected token u background.html:1
Uncaught SyntaxError: Unexpected token u background.html:1
Uncaught SyntaxError: Unexpected token u inspect.js:224
Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224// this line:
   this.receiveError = function (ev) {
        var message = JSON.parse(ev.data);
        // Pitch the error to the view?

Cannot connect to Reverse Proxy

Hi- I have what I think is a basic Lync setup, but it's basica-ally driving me crazy! What I have is:
1 Standard Edition Server
1 Edge Server
1 Reverse Proxy (IIS with ARR)
1 Office Web Apps Server
I've followed some of the numerous how-tos to set up these boxes. My internal setup works great with no issues.
I've worked with my security admin to get the firewall rules set up.. We have SSL certs (with SANs) installed and assigned on RP and Edge. I've set up persistent routes on RP and Edge to FE server. I can telnet from Reverse Proxy to Edge and
back. I've ran netstat to ensure both are listening on 443. But when I run the Microsoft Connectivity Analyzer (online) results show that connection to port 443 on the server failed and says that the port is either blocked or not listening.
Using the Lync Connectivity Analyzer (in house) shows that a connection to "Lyncdiscover.domain.com" failed.
Any insight is greatly appreciated.
Thanx

Public DNS records verified. (Although I do see some posts that say to create CNAME records instead of A records (we created A records) and other posts that say it doesn't matter.
Rewrite rules in IIS ARR verified.
I've triple-checked the certificate (issued by Digicert) and the simple URLs are all listed in the SAN:
sip.domain.com, meet.domain.com, dialin.domain.com, lyncdiscover.domain.com, and officewebapps.domain.com
Here's the error generated by the LCA:
An error occurred while sending the request.
Unable to connect to the remote server
A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond [xx.xxx.xxx.xxx]:443
If I try to open the Default Web Site from the server, I'm first presented with "There is a problem with this website's security certificate. The security certificate presented by this website was issued for a different website's address" message.
Clicking on "continue to this website" I get a "403-Forbidden" error. I read in another post that this message was as expected.
Trying to connect to lyncdiscover.domain.com from a browser on the RP returns a "Server not found". [This leads me to believe that the request is not getting through the firewall]. Attempts to access the simple URLs returns a "This page cannot
be displayed"
All services work internally...
More telnet testing: As previously posted, I CAN telnet between RP and Edge (external IPs) but CANNOT telnet to public IP of RP on 443
A similar issue with the Edge Server: netstat shows 0.0.0.0:443 listening but cannot connect via telnet to public IP on 443
RELATED QUESTION: Do I need the SANs included on my internal cert, too?
Thanx
SteveSmo
"Never, ever doubt what nobody is sure about." -Willy Wonka

Cannot connect to AppStore/iTunes

Hi,
I cannot connect to the AppStore and iTunes on my iPhone 3GS while using my WiFi connection, but can access these stores on Edge and 3G network. I have tried resetting network settings but that did not solve the problem.
I can use the AppStore and iTunes store on my PC and can download stuff and then transfer it on my phone by syncing it.
Can I change something to get the store working again on phone over Wifi?

Can't connect to the iTunes Store

Cannot connect to internet on at&t 3G but can connect wirelessly. Anybody help?

Cannot connect to internet on at&t3G but can connect wirelessly. Any suggestions?

I have the exact same phone with the exact same situation. Verizon to ATT. I called att and recieved some help. I chnaged my data package to include a personal black berry service and now I have full EDGE. they also sent to my phone the service books for a bold which is the closet they have to the tour. still says that I need to contact my provider and get them to enable the browser. did you ever figure it out?

"Cannot Connect to iTunes store" from phone.

Weird problem: For some reason I cannot download new Apps to my iPhone 4s from the phone. I can update existing apps fine, and I can search for new apps fine, but if I want to install a new App from the iTunes store on the phone itself, I always get a message: "Cannot connect to itunes store". It happens on WiFi, on 3g, on Edge... I've restarted the phone and reinstalled the software from scratch.
It's not an issue I've had before, on my 3gs. Any ideas? It's an annoying issue to say the least....

I believe for apps you use the app store.
The itunes store is to download music/shows/video is that what your trying to download.

Macbook Pro Cannot Connect to SMTP

I am running a 2010 MacBook Pro with OS X 10.6.8. I use Mac Mail app to send and receive e-mail. Since Thursday 27th Dec 2012 I have been unable to send e-mail. I get the grey spinning wheel until the following error message appears:
The SMTP connection to server “mail.(mydomain).co.uk” failed.
My outgoing mail server is currently showing as offline. In fact I have 2 e-mail accounts and both are showing as offline. No problem receiving mail. Connection doctor connects fine to incoming mail, but not outgoing.
I have tried the following (plus other things) without any success:
Checked all the details, passwords etc
Changed ports from 25 to 465 and 587
Checked my IP address - it is not blacklisted
Removed and re-added e-mail account
Telnet port 25 - it is not blocked, but appeared to successfully connect (from what I understood from checking www)
Temporarily disabled firewall
Re-installed Mac app
Rebuilt mailbox
Repaired disk permissions
Used the repair disk utility
Deselected SSL and changed various options within "Edit SMTP server list"
Reset the keychain
Tried updating software but it says no update available.
Re-instated an old Accounts.plist (and one other file which I forget, something like com.apple.mail) from time capsule.
I then set up a hotmail account on Mail app but had exactly the same problem, ie cannot connect with SMTP server.
However, I set up my e-mail account on my wife's iPad with the same details and there was no problem at all, e-mail sent just fine as it does from my iPhone. So the issue has to be with my Macbook, right? Can anyone help before I go and spent £1250 on a new Macbook? I'm sure I'm missing something obvious. Thanks in advance for any advice.

Just FYI, I've had the same problem for months now. I have been accessing my hotmail via the web, but decided to try the OS X Mail app. I could get emails into the account with no problem but couldn't send. I read all the blog and support entries and have tried everything they recommended, like changing my computer name to one word, without success. Then last night, it just so happened that my broadband provider had to change out my wireless modem. As soon as he plugged in the new one, some emails that had been in my outbasket for a month went through instantly and all of a sudden my Mail, both incoming and outgoing now work. So I think people need to look at their router settings for the a solution to the problem.

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Cannot connect to other computers on network

We have a small office network with 7 macs on it. 5 wired 2 laptops with Airport Extreme.
We have an 8 port switch where the 5 desktops and the airport connect. When I am on a laptop I cannot connect to any of the desktops. It does not even see them (and same with desktop to laptop) What do I need to do to share these two on the airport

Configure the AirPort Extreme base station (AEBS) so that it the option to distribute IP addresses is DISABLED. That will place the wireless and wired computers on the same subnet.

PI 7.11: Cannot connect to server using message server:...

Hello Guys,
we make the Application Management for a Customer PI System.
Scenario:
- the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
- WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
Problem:
Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
"Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
In the Details from the Error Message:
"<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
Sorry for my bad English
Best Regards,
Markus

Hi Markus,
did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented. There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
(This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
Solution: Establish a connection without any proxy in between.
E.g.: a terminal server in the same network
It would be helpful to find more people with the same problem to force a fix from SAP for that.
If anyone else is having problems with this, please add a comment to this thread.
Best regards
Christian

Exchange active sync cannot connect to server after migration mailbox user from exchange 2007 to exchange 2013 coexistence

Hello, everyone, my name is rafl
I have a problem with exchange 2013 active sync.
I have installed exchange 2013 coexistence with legacy exchange 2007, I have to migrate user mailboxes: [email protected] from exchange 2007 to exchange 2013.
but any problem with active sync connection on the mobile device after moving mailbox user. I reconfigure the exchange ActiveSync external connection domain (latest.domain.com) on mobile device replacing legacy exchange ActiveSync external connection domain
(legacy.domain.com)
the process of moving mailboxes successfully without error.
Access OWA for exchange 2007 and exchange 2013 is running normally
access mail from Outlook running normally
Certificate request has been installed and has no problem with it
The OWA virtual directory is configured for internal and external connections and different from the legacy exchange
The autodiscover virtual directory is configured for internal and external connections and different from the legacy exchange
ActiveSync virtual directory is configured for internal and external connections and different from the legacy exchange
user mailboxes are still on exchange 2007 is not problematic.
only problem with Exchange Active Sync on mobile devices, where I set up an email with android, iphone, windows phone. the error message: cannot connect to the server.
but, if I create a new user and create user mailboxes directly in exchange server 2013, ActiveSync can run without error on mobile device, access through OWA, MsOutlook, Outlook Anywhere also run normally.
only the results of user migration from exchange 2007 to exchange 2013 which is troubled with exchange ActiveSync connection.
any ideas for this problem, and what should I check on the exchange server ..?

i have run the activesync test connectivity and get some error :
Testing TCP port 443 on host domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 3091 ms.
Testing TCP port 443 on host autodiscover.domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 21072 ms.
Testing TCP port 80 on host autodiscover.domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 21049 ms.
I have allowed access to port 443 (https) and 80 (http) on the firewall and re-run testconnectivity, but still with the same results. if I enable active sync for users who created directly in Exch 2013 there is no problem with the ActiveSync, just a problem
for users who moved from Exch 2007 to Exch 2013. @Android, iPhone, and Blackberry the error message "cannot connect to the server"

TS3276 I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

Sometimes deleting the account and then re-creating it can solve this issue
Write down all the information in accounts before doing this
Highlight the account on the left and click the minus button
Then click the plus button to add the new account and follow the prompts

Cannot connect to iTunes store connection with the server has been reset

I have updated itunes and now I cannot connect to the itune store says connection is reset but all other programs and internet is working properly. Please help

Hi!
Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
So, what can I do now?
Thanx

Cannot connect to EDGE

Similar Messages

Maybe you are looking for