Cannot connect to Enterprise Manager. Displays Enterprise Manager(null)

Hi All:
I have downloaded and installed VMware, Oracle 10g RAC and Red Hat Enterprise Linux 3 using Disk1 and Disk2.
All seemed fine. However I cannot log on to the Enterprise Manager nor start the listener nor any instance of the database
I got the error message below when I tried starting an instance of the Database. The Enterprise Manager displays "
Enterprise Manager(null) in the title bar of mozzila browser when I tried to start it.
[oracle@raclinux1 /]$ srvctl start instance -d o10G -i o10G1
PRKP-1001 : Error starting instance O10G1 on node raclinux1
raclinux1:ora.raclinux1.vip:Interface eth0 checked failed (host=raclinux1.us.oracle.com)
raclinux1:ora.raclinux1.vip:Invalid parameters, IP, NETMASK and IF all must be specified
raclinux1:ora.raclinux1.vip:checkIf: interface name is NULL
raclinux1:ora.raclinux1.vip:Interface eth0 checked failed (host=raclinux1.us.oracle.com)
raclinux1:ora.raclinux1.vip:Invalid parameters, IP, NETMASK and IF all must be specified
CRS-0215: Could not start resource ora.O10G.O10G1.inst.
Does anyone have any suggestions?
Thanks
1113777

If you read the README you'll see that the recommended way is to not bother downloading VMware, just use OUI to install it, it will fix the subnet mask to 192.168.203.0. If you still choose to install on your own, please refer to the readme for details on how to manually fix it.
It is also safe to install VMware in this fashion even if you already have it installed, just to get the subnets correct. Without this step, as you can see, nothing works inside the VM. This is because we are using fixed IP addresses and the randomly chosen subnet number doesn't match what we expect.
good luck,
Saar.

Similar Messages

When trying to connect to youtube "cannot connect to YouTube" is displayed.

I'm able to pull up YouTube on safari but, when I try and connect using the app it displays "cannot connect to YouTube."
My bookmarks tab no longer exists on safari either. Only the history tab and ipad user guide. I've tried resetting and connecting to itunes and browsing the store and then syncing as one of the other posts suggested however, that did not work with my ipad. Both of these problems happened simultaneously.

https://support.mozilla.org/en-US/kb/Hyperlinks-in-Messages-Not-Working

Cannot connect to WIFI with WPA2 enterprise security

I'm currently trying to switch my Wifi from WPA2 Personal to WPA2 Enterprise using a dd-wrt flashed TP-Link router and a Synology Diskstation as the RADIUS server. The diskstation also creates the CA certificate which I can download from there for all client devices.
Configuration on the side of the router appears to be fine, I've entered all the details for RADIUS authentication and left "WPA Algorithms" at its default setting "TKIP", other options being ("AES" and "TKIP+AES"). I said it appears to be fine because my Android phone connection is established succesfully using the following (default) parameters:
EAP method: PEAP
Phase 2 Auth: NONE (also works with MSCHAPV2, and probably other options)
CA cert: unspecified (didn't download it to smartphone, must be fetched automatically from router I guess)
User cert: unspecified
Identity: myDiskstationUsername
Anonymous Identity: (blank)
Password: myDiskstationPassword
So far, so good... I still cannot manage to get a connection from my laptop running Arch. Prefered method would be via "wicd". The best match seems to be the following configuration profile:
name = PEAP with TKIP/MSCHAPV2
author = Fralaltro
version = 1
require identity *Identity password *Password
optional ca_cert *Path_to_CA_Cert
protected password *Password
ctrl_interface=/var/run/wpa_supplicant
network={
ssid="$_ESSID"
scan_ssid=$_SCAN
proto=WPA
key_mgmt=WPA-EAP
pairwise=TKIP
group=TKIP
eap=PEAP
identity="$_IDENTITY"
password="$_PASSWORD"
ca_cert="$_CA_CERT"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
But it's not working, both with and without specifing the optional path to the CA certificate. Any ideas what I could've been missing or any clues for debugging?
Last edited by saciel (2013-11-07 09:55:16)

Why don't you use netctl?
I'm using netctl to connect to my FreeRadius Server, and I use this config...
Description='A wireless connection using a custom network block configuration'
Interface=wlp0s29f7u3
Connection=wireless
Security=wpa-configsection
IP=static
Address='192.168.1.200/24'
Gateway='192.168.1.1'
DNS=('192.168.1.1')
WPAConfigSection=(
'ssid="SSID"'
'key_mgmt=WPA-EAP'
'eap=PEAP'
'phase2="auth=MSCHAPV2"'
'group=CCMP'
'pairwise=CCMP'
'identity="user"'
'password="password"'
'priority=1'

Cannot connect to direct access clients from management servers

I have direct access setup on a Server 2012 machine and I have successfully added clients to it. Clients can reach internal resources and everything seems to be working great inbound. However, I am having some trouble with outbound management.
From the Direct Access server I can ping, RDP, browse files, etc... From the management server I have defined in the DA setup I can only ping the machines and nothing else.
I had worked with some MS tech support to get to this point, and they had me configure my DA server and the few management server with status IPv6 addresses. I'm not sure if this is necessary or if outbound managment should work using ISATAP?
My DA server is Server 2012, and the clients are Windows 8 and Windows 8.1.

You should be able to make outbound management work using either ISATAP or native IPv6. If you have configured native IPv6 and it's not working, there may be some kind of routing issue with the way that IPv6 is setup in your environment, or even a piece
of networking equipment that is not IPv6 capable.
If you're interested in trying the ISATAP route to see if you can get it working that way, Chapter 3 in this is dedicated to the setting up of ISATAP: http://www.packtpub.com/microsoft-directaccess-best-practices-and-troubleshooting/book
(sorry, not trying to be self-serving, but these kinds of questions are exactly the reason why I put the book together)

Why is it that the 2010 macbooks cannot connect with the thunderbolt display even though they have a thunderbolt port?

I am wondering why cant the 2010 macbooks access the thunderbolt capabilites on the new thunderbolt display? I think it is pointless and some what disrespectful that they force you to try to buy a new computer if you are interested in the display. The 2010s are still very good and relevant devices and apple prides its self on making devices that are usable for more than one year. In that case the older comps will soon stop being able to be updated.

The Thunderbolt specification and implementation was rolled out starting with the Early 2011 models. For some reason, Apple decided to recycle the connector already being used for the Mini-DisplayPort.
So no, you can't "access" TB capabilities in the older MBP cause the circuitry isn't there.

Can Connect via Database Control but Cannot Connect from Enterprise Manager

Hi experts,
This is a 10g database on a Windows server.
when I remote into the server:
- I CAN connect via the web-based Database Control
- I CANNOT connect to any db/instance via regular Ent Mgr - get the ugly "ORA-12154 TNS: could not resolve the connect identifier specified" error.
I thought both tools used the same connection files (tnsnames, listerner etc), but maybe not.
When db control connects, but Enterprise Manager cannot, what should I check to find the problem?
Thank you.
John

Thanks madrid.
I eventually got it to work by changing the tnsnames.ora in the client_1 folder
This is the original:
FS9ENFP1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PNCLAFDB)(PORT = 1521))
(CONNECT_DATA =
(SID = FS9ENFP1)
(SERVER = DEDICATED)
ORCL=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PNCLAFDB)(PORT = 1521))
(CONNECT_DATA =
(SID = orcl)
(SERVER = DEDICATED)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I removed the EXTPROC entry and added entries for the ORCL and FS9ENFP1 databases, specifying server_database like this:
FS9ENFP1_PNCLAFDB =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PNCLAFDB)(PORT = 1521))
(CONNECT_DATA =
(SID = FS9ENFP1)
(SERVER = DEDICATED)
Not really sure WHY it is necessary to list an instance twice, once without server name and another with server name... but EM is able to connect now. I simply modeled tnsnames after another Oracle server where EM was able to connect.
John

Cannot Connect using Enterprise Manager

The details of the Oracle 9i Server 9.2.0.1.0 are as follows:
IP: 172.25.22.78
SID: MSPD
Port 1521
I am trying to connect to this server using enterprise manager but i get the "ORA-12543: TNS:destination host unreachable" Error.
However I am able to ping the server successfully.
When I try the command telnet 172.25.22.78 1521 I get an error "Could not open connection to Host, on port 1521; connect failed."
What could be the reason?
Following is the entry in TNSNAMES.ORA
# TNSNAMES.ORA Network Configuration File: C:\oracle\ora92\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
MSPD_172.25.22.78 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.25.22.78)(PORT = 1521))
(CONNECT_DATA =
(SID = mspd)
(SERVER = DEDICATED)
Thanks and Regards,
Ashwin

Hello everyone,
Thanks for all your answers so far. I appreciate your assistance very much.
Does tnsping work?
No TNSPING 172.25.22.78 1521 did not work
Can you connect via sqlplus?
No. The net service mspd_172.25.22.78 is configured in the Net Manager.
It fails when I test it from Net manager as well as SQL Plus
The server is in Boston.
This problem is only occuring when we are accessing the server from Mumbai.
My team from Cincinatti is able to connect to the server.
ping, tnsping, sqlplus, telnet are all successful for them.
When i contacted the Network team in mumbai they had a look at the Trace route of the IP and declared that there is no firewall from our side that is blocking the communication. They asked me to contact the client to see if the server port they provided is correct and is open for access.
Could it be that the client put up a firewall that allows access from cincinatti office but not mumbai? (all tests from cinci - pass, all tests from mumbai except ping fail).
Is it possible that Cinci team can access port 1521 but from mmumbai we have to give another port which is reverse mapped to port 1521?
Thanks and Regards,
Ashwin

Cannot login as sysdba in Oracle Enterprise Management Console

Hi,
I have recently installed Oracle 9.2.0.4 in Red Hat Linux 9.
I ran "oemapp console" to launch the Oracle Enterprise Manager Console Standalone. However, everytime I tried to login as:
user: sys
password: <sys password>
connect as: sysdba
I always get ORA-01031: insufficient privileges.
The Oracle database where I cannot connect as sysdba in OEM was created MANUALLY.
However, I can successfully login to OEM as sysdba if the database was created using Database Configuration Assistant...
So I might have missed out some configurations when I creasted the database MANUALLY...
any ideas??
Thanks in Advance
Regards
Prasanna

Hi there once more,
Of course it is possible that user system has the same problems as user sys (insufficient privs)....
In that case try to log on as internal/pwd@dbname as sysdba to perform the trick.
Good luck!
Regards,
Georges.

DB Enterprise Manager displays wrong values

Hi,
I modified the size of db_recovery_file_dest_size from 10GB to 15GB and manually deleted the archive log files (size 9.7GB) from destination and also restarted the DB. Even then the enterprise manager displays the free space as only 5GB instead of 15GB.
Please provide suggestions.
DB version: 10.2.0.2.0
Regards,
Ashraf

Thanks for the tips - but:
I never deleted the archivelogs - I increased the db_recovery_file_dest_size parameter - this is on ASM so the RMAN backups clear the archive logs after the backup. So there's > 40GB free, but OEM doesn't see that - even on the Individual Metric screen it thinks it's 90% full when it's more like 5%.
This isn't dbconsole, is it? It's grid control... I don't know if that matters, but it has been restarted - the RAC DB has also been restarted.
I really don't want to drop and re-add the target - this is a production instance and has a number of jobs associated with it.
Is there a way to clear the alert and have it re-check?

Error occured while performing nmConnect : Cannot connect to Node Manager.

Hi There,
I am trying to connect to my node manager via WLST, however when I try to do so I get the following exception:
WLSTException: Error occured while performing nmConnect : Cannot connect to Node Manager. : Read channel closed
I have searched Google for the reason behind this exception, but I couldnt find anything that explains why I am getting it.
Could someone help me out? All I want to do is connect to the node manager and then kill one of the nodes.
I should point out that the AdminServer and the node are the same machine.

The nodemanager will not accept SSL connections, I checked the config on WL itself.
I can confirm that it is also in nodemanager.domains
I have restarted the service and also bounced the box, but this hasnt helped. I get the following when running this command:
<27-May-2013 14:08:43 o'clock CEST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<27-May-2013 14:08:43 o'clock CEST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
Should it be going through all of this if I am trying to connect with plain text?

WLSTException: Cannot connect to Node Manager

Hello,
I am trying to connect to my nodemanager via the WLST rather than the service and get the following error. (I am using custom keystores instead of Demo)
wls:/offline> nmConnect('weblogic','1234',' xx.xx.xx ','5556','base_domain',':/Oracle/Middleware/user_projects/domains/base_domain','ssl')
Connecting to Node Manager ...
<Oct 17, 2012 4:52:38 PM PDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certifica
te parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. -For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Un
supported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupp
orted OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Warning> <Security> <BEA-090542> <Certificate chain received from xx.xx.xx - yy.yy.yy.yy was not trusted causing SSL handshake failure. Check the certificate chain to determine if it should be trusted or not. If it should be trusted, then update the client trusted CA configurati
on to trust the CA certificate that signed the peer certificate chain. If you are connecting to a WLS server that is using demo certificates (the default WLS se
rver behavior), and you want this client to trust demo certificates, then specify -Dweblogic.security.TrustKeyStore=DemoTrust on the command line for this client.>
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 123, in nmConnect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing nmConnect : Cannot connect to Node Manager. : [Security:090542]Certificate chain received from xx.xx.xx - yy.yy.yy.yy was not trusted causing SSL handshake failure. Check the certificate chain to determine if it should be trusted or not. If it should be trusted, then update the client trusted CA configuration to trust the CA certificate that signed the peer certificate chain. If you are connecting to a WLS server that is using demo certificates (the default WLS server behavior), and you want this client to trust demo certificates, then specify -Dweblogic.security.TrustKeyStore= DemoTrust on the command line for this client.
Thanks..

Yes Node Manager is running fine. I was able to overcome the above error, by using the following parameters while running Weblogic.WLST:
"java -Dweblogic.security.TrustKeyStore=CustomTrust -Dweblogic.security.CustomTrustKeyStoreFileName=<name>.jks weblogic.WLST"
Thanks,

Implementing the Enterprise Support in Solution Manager

Hi Experts,
Can anybody tell me what are the pre requisites to implement Enterprise support in solution manager?
Also let me know what are steps involved in implementing the enterprise support.
Thanks in Advance
Hari

Hello Hari,
In order to implement Enterprise Support your organization should registered as a Value Added Reseller(VAR) with SAP. You can get all the required documentation under https://websmp104.sap-ag.de/solutionmanager --> Information for VARs, ASPs and AHPs which is in the left hand side of the page. However, you need to have a S-user ID of the VAR.
The following are the steps need to perform in implementing the Enterprise Support firmly known as Service Desk for VARs.
1. SAP Solution Manager basic settings (IMG)
a) Initial Configuration Part I
b) Maintain Profile Parameters
c) Maintain Logical Systems
d) Maintain SAP Customer Numbers
e) Initial Configuration Part II
     1) Activate BC Set
         a) Activate Service Desk BC Set
         b) Activate Issue Monitoring BC set
         c) Set-up Maintainance optimizer
         d) Change online Documentation Settings
         e) Activate Solution Manager Services
         f) Activate integration with change request Managemnt
         g) Define service desk connection in Solution Manager
   2)Get components for SAP Service Market place
        a) Get SAP Components
   3) Get Service Desk Screen Profile
       a)generate Business Partener Screen
   4)Copy By price list
       a)activate Service Desk BC Set
       b)Activate Issue Monitoring BC set
       c)Set-up Maintainance optimizer
      f) Business Add-In for RFC Connections with several SAP customers
      g) Business Add-In for RFC Connection of Several SAP Cust. no.
      h) Set-Up SAP Support Connection for Customers
      i) Assign S-user for SAP Support Portal functionality
      j) Schedule Background Jobs
      k) Set-Up System Landscape
      l) Create Key Users
      m) Create Message Processor
2. Multiple SAP Customer Numbers
      a) Business Add-In for RFC Connections with several SAP customer numbers
      b) Set-Up SAP Support Connection for Customers
3. Data transfer from SAP
      a) Data Transfer from SAP
4. Create u201COrganizationu201D Business Partner
5. Service Provider function (IMG)
      a) Business Add-In for RFC Connections with several SAP customer numbers
      b) Business Add-In for Text Authorization Check
      c) Activate BC Set for Service Provider
      d) Activate Text Types
      e) Adjust Service Desk Roles for Service Provider Menu
6. Service Provider: Value-Added Reseller (VAR)
      a) Business Add-In to Process Actions (Post-Processing Framework)
     b) Activate BC Sets for Configuration
     c) Create Hierarchy and Product Category
     d) Set-Up Subcategories
     e) Create Business Partner as Person Automatically
     f) Set-Up Automatic Confirmation of Messages
    g) Maintain Business Partner Call Times
    h) Set-Up Incident Management Work Center
7. Work Center (Web UI)
    a) Activate Solution Manager Services
    b) Assign Work Center Roles to Users
Hope it helps.
Regards,
Satish.

How to add enterprise Portal in Solution manager

Hello,
I wanted to add the enterprise Portal system in Solution manager ( for Service desk ) in SMSY.
Can anybody guide me how can I add the EP( enterprise portal system) in Solution manager
Regards,

Hello,
What is your SLD look like?
You have to connect the EP to SLD and use the LANDSCAPE FETCH job to import to SMSY - Txn SMSY_SETUP - Source SLD.
Now the non abap system data present in the SLD will be reflected in SMSY.
Refer below threads:
How to define an enterprise portal system(JAVA) in SMSY in solution manager
Re: Creation of solution for J2EE system
How insert Enterprise portal in Solution Manager
Regards
Vivek

How insert Enterprise portal in Solution Manager

Hi guys,
Can anyone explane me how can I insert an enterprise portal in Solution Manager?
I have execute this steps:
- transaction smsy
- landscape components -> Systems -> Create New System With Assistant
- Choose SAP Enterprise portal
After that I can see the Entreprise portal in smsy but I haven't inserted the ip of EP.
How can connect the E.P. with my solution manager?
I would configure the "System Monitoring" scenario for EP..
Thank in advance for help.
best regards
giovanni

does this actually work out?
To have SolMan 7.0 EHp1 installed and than to install SAP EPC on top of this?
SAP EPC is based on NW, so is SolMan 7.0. But according to the SolMan 7.0 Master Guide EPC/EP is not listed as a available Usage Type
Nesimi

Reg:implementation Enterprise portal in solution manager

hi all
i am new to the concept of solution manager .In this how can we implement Enterprise portal .Actually what an EP consultant work need to be done in this solution manager.can any one provide some real time scenarios info related to it .
regards
Deepika

Hi,
Regarding the implementation phase, Solution Manager helps you via several functionalities:
- Solution Documentation: Central documentation of processes, system landscape, custom code,...
- Test Management:Change impact analysis, End-to-end test management
- Change Control Management: Integrated quality management, Synchronized transports of various components, Controlled and documented adjustment of business processes incl. approval process
- Application Incident Management: Integrated service desk, Involvement of partners in problem resolution, Provide root-cause analysis for complex landscapes with diverse technology stacks
The most important part in from my perspective for a implementation consultant is the Project Documentation functionality, where you can get Implementation Content for Enterprise Portal. This includes business scenarios documentation and business process included in the Business Process Repository, how to configure different scenarios and business processes, test cases, etc.
I think you can find some information in the marketplace about this functionality. For example you may find something under service.sap.com/alm -> SAP Solution Manager and Tools.
Best regards,
Fernando

Cannot connect to Enterprise Manager. Displays Enterprise Manager(null)

Similar Messages

Maybe you are looking for