Cannot connect to facetime using ipad air

Why can't I connect to facetime now? It was ok before! I have done the suggested steps to resolve the problem but still same thing!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

Similar Messages

  • I cannot connect to FaceTime, encountered "error processing registration, please try later" message on my Macbook Air, but I don't have this problem on my IMac. Can anyone help?

    I cannot connect to FaceTime, encountered "error processing registration, please try later" message on my Macbook Air, but I don't have this problem on my IMac. Can anyone help?

    I have the same problem on my iMac. My facetime has been working, but now I'm getting the same error as You. I've been through the following:
    The stuff that Linc Davis suggested, new profile on iMac, moved iMac into DMZ zone with no firewall rules, tested with other Apple-ID, checked hosts file, checked different timezone settings, tried to connect to 2 mobile APs (with diferent providors), changed DNS servers (ISP's DNS + Google DNS + Open DNS) - Nothing helped. Also talked to Apple Support, since i have Apple Care, but the seem to be a bit clueless also Well I've mailed them the results of my different tests, so lets see what they come up with - Unfortunately I'm sure it will be the same suggestion as all the major PC manufactures suggests, reinstall and test - RIGHT !!!!!!
    If I get solution, I'll post it here.
    Kind Regards
    Kim

  • I cannot connect with facetime in my imac. Why?

    I cannot connect with facetime in my Imac. Why? I have an apple id and password which i use for my ipad and iphone. Why does it not work for the imac?

    i had the same problem but i just kept quitting and opening the app and putting in my information a whole bunch of times and eventually it worked

  • Cannot sign in facetime using iPad2

    hello,
    I've just got 2 iPad2 few days ago for myself and sister (32GB+3G for me, 32GB+wifi for her). The problem is, my sister's iPad2 can work well with facetime, but mine can't even sign in.
    it always show "connection error......."
    I don't really know the problem, she sits right next to me and work well with facetime but I still cant even sign in.
    note that we are under same wifi network and use different apple ID
    PS. and I also can sign in facetime using my apple ID with my sister's iPad2 too. And i still not apply sim card to my iPad.
    hope to see your reply soon.
    cheers,

    My time setting is fine.
    I have also tried verifying a different email address against my apple ID, but have the same result (network error) when connecting to FaceTime using that email. I have also tried creating a new apple ID within FaceTime. The account gets created but you still cannot sign in.
    I can't explain how this can be the case. The only thing left is some kind of network error when attempting to sign-in. However, I cannot see any problem with my router. There are no weird routing tables and I am using Goggle DNS. All my other web based services are operating normally (Skype, chat etc)

  • Cannot send email from my IPad Air

    I suddenly cannot send email from my IPad Air. Keep getting message that my email recipient
    was rejected by the server because it does not allow relaying.  Don't understand what this means as I have been able to send email before.

    Paula, in most cases this message appears when you are sending email from a ISP server not in the pop settings and SMTP settings in your email program.
    In example if I send out email from my iPad I must be on my own isp's server to send. I have roadrunner but if I send email out using say Verizon's email server I will get a reject notice.
    You did not say what email program you are using but if it is hotmail or yahoo or your isp's email in two of these email accounts there are stand alone apps which work much better than the stock email program on the phone.
    If you are using road runner or another ISP email you must get the proper Pop3 (incoming) server settings and SMTP (send) settings from your ISP
    You can then just go into the Settings-Mail, Contacts and Calendar section and click on the email account and change to the proper settings from your ISP.
    You could delete as you were told but why bother when only the sending and receiving settings need to be entered.
    If the settings are correct, on an iPhone it tests the settings. If correct send an email. If incorrect you will need the proper settings from your ISP.
    It is actually very easy to do.
    Hotmail is not an option on my iPad air | Apple Support Communities
    Problems with POP email accounts set up on iPad... | Apple Support Communities
    Good Luck

  • TS3899 Cannot send email with new iPad air.  Works fine with old iPad and iPhone.

    Cannot send email with new iPad air.  Works fine with old iPad and iPhone.  I have deleted account and reinstalled.

    Thanks.  I got the problem fixed.  Spent time with the Apple folks and was kicked up to a senior advisor.  It seems the problem was with my internet provider - Tmie Warner.  Remember I could use the old ipad and the iphone to send mail.  I checked all the specifics between the three units.  It seems that TW is changing over from the RR.com  to TWC.com.  Since the new ipad air was just set up, it fell under the new TWC mail specifics. 

  • Cannot send email anymore from IPad Air

    >>Duplicate post removed to comply with the Verizon Wireless Terms of Service   Please see Cannot send email from my IPad Air<<
    Message was edited by: Verizon Moderator

    Thanks.  I got the problem fixed.  Spent time with the Apple folks and was kicked up to a senior advisor.  It seems the problem was with my internet provider - Tmie Warner.  Remember I could use the old ipad and the iphone to send mail.  I checked all the specifics between the three units.  It seems that TW is changing over from the RR.com  to TWC.com.  Since the new ipad air was just set up, it fell under the new TWC mail specifics. 

  • HT6001 After installing iTunes 11.1.4 I cannot sync wirelessly with my iPad Air.

    After installing iTunes update 11.1.4, I find I cannot sync wirelessly with my iPad Air. I connected OK with a USB cable and checked that I had wireless syncing switched on my iMac which is running OS X 10.9.1. Anyone else haviing similar issues?

    Same here...very annoying. I reinstalled mavericks, but no result

  • Does ipad air have OTG functions  to connect a USB with ipad air)?

    Does ipad air have OTG function(which means using some device to connect a USB with ipad air)?

    iPads do not have a USB port.

  • Cannot connect airport express to ipad I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express.  Does anyone have a solution?

    cannot connect airport express to ipad
    I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express.  Does anyone have a solution?

    I could not "see" my Express via my wireless router or via the Airport Utility until I reset it to Factory Settings by unplugging it then holding in the tiny reset button while plugging it back in, waiting for the flashing yellow LED signal before letting go.
    Then I set it up to DHCP - "connect to wireless network" and DOWNGRADED the firmware to 7.3.x
    I would tell you the exact Firmware but I can no longer "see" the Airport express............ AGAIN or still.....
    BUT at least I am listening to music streaming from my MacBook Pro... Hmmm.
    I log back into the router (Linksys WRT110) and it no longer shows the Airport Express as a DHCP client AND the Airport utility can no longer "find" any Airport Devices..
    So if I don't move, or there are no cosmic events, or maybe my KARMA is effecting the device or my "VIBES" are good, but I'm not sure if will continue to work.. Sure would like to use this little device from hel*.
    Since I have had this Airport Express I have spent many hours trying to get it to work.
    It works just long enough to fool me and then takes a dump...
    Maybe this time?
    5 Minute later...
    Music was playing. I went into iTunes and switched from Airtunes to Computer speakers. When I tried to switch it back GUESS WHAT?
    [An unknown error (-15006) occurred while trying to connect to remote speaker "Airtunes"]
    Wonderful Green LED though. Totally useless piece of equipment AFAIK.
    Message was edited by: Daniel Shattuck

  • Cannot access itune store through ipad air. The message says "cannot open itune store".

    Cannot access itune store through ipad air. The message says "cannot open itune store".

    Cannot connect to iTune Store
    (a) Sign out and sign in again (Settings>iTunes and App Store>Apple ID)
    (b) Check Time Zone and set to automatic (Setting>General>Date and Time)

  • Free iWork/iLife apps with used iPad Air

    I bought an used iPad Air with 4G. Now I would like to get the free apps (iWork and iLife) made by Apple. However, I cannot register the iPad to my Apple ID (last user has already unregistered this iPad from his Apple ID) which also means I can't get those apps for free.
    Is there a chance to get those apps? Or do I have to buy them?

    I can use my Apple ID on the iPad (logging in to the appstore and so forth).
    What I can't do is to go to supportprofile.apple.com and enter the iPad's serial number and register this product. It says "According to our records, this serial number is registered to another Apple ID. If you have more than one Apple ID, log in to My Support Profile with that Apple ID to see your other registered products. Not sure if you have another Apple ID? "

  • PI 7.11: Cannot connect to server using message server:...

    Hello Guys,
    we make the Application Management for a Customer PI System.
    Scenario:
    - the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
      SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
    - WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
      Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
    Problem:
    Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
    "Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
    In the Details from the Error Message:
    "<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
    Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
    The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
    Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
    Sorry for my bad English
    Best Regards,
    Markus

    Hi Markus,
    did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
    P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented.  There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
    If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
    (This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
    Solution: Establish a connection without any proxy in between.
      E.g.: a terminal server in the same network
    It would be helpful to find more people with the same problem to force a fix from SAP for that.
    If anyone else is having problems with this, please add a comment to this thread.
    Best regards
    Christian

  • Can I use iPad air cellular data in nepal? Does iPad air is carrier locked?

    Can I use iPad air cellular data in nepal? Does iPad air is carrier locked when we buy? Please give idea.

    Hi Narayanfromct,
    If you have questions about using cellular data while traveling with your iPad, you may find the following article helpful:
    iPhone and iPad: Using cellular networks while in another country
    http://support.apple.com/kb/ht1807
    Regards,
    - Brenden

  • Cannot connect to server using message server: ms://xiidhasoft:50004/P4

    Hi SAP Guru's
    When PISUPER or any any of the enduser is trying to login in the Integration Builder , they are getting error
    Cannot connect to server using message server: ms://xiidhasoft:50004/P4
    I have tryed to search in SDN and got below solution but no success
    1. Exchange Profile of PI - http://host:port/exchangeProfile
    2. Check with the rmi port number.
    3. if rmi port number is empty or any number is present ( check with Tr code: SMICM - services - check for p4 port number - it will be ex: 5<nr>04)
    4. fill the rmi port number as present in the P4.
    OR
    implement note 864268
    I have Netweaver PI 7.1 .
    Please suggest some alternative solution.
    Thanks & Regards
    Vinay Patel

    You may check your local PC Java Network Setting.
    Troubleshooting:
    Probably Javau2122 WebStart does not detect the correct Proxy Settings. In this case please proceed as follows:
    To change the Proxy Settings for Javau2122 Web Start:
    1. Click Start --> Run  and enter javaws. Press button OK.
    2. Control Panel -> Programs ->Java -> Network Settings...
    3. Select Direct Connection to switch off the proxy settings and press button OK.
    If this still does not work, select Use proxy server to set manually the HTTP Proxy and Port.
    Contact your network administrator for the correct settings.

Maybe you are looking for

  • Problem during Process Order creation

    Hi, I have problem while creating Process Order. I have maintained all the basic data required to create the process order. When I Release the order, I am able to create the control recipe also, but PI sheet is not generated along with it. System giv

  • Sales Order for assembly

    Hi, Customer on 11510.2 does not have WIP, MRP and APS. Requirement: Sales Order for an assembly needs to be entered. Customer wants to procure each component of the assembly. The components are received in a warehouse and then issued to another vend

  • Some questions and observations.

    Every time I use the BTW tester it gives different results for download/ping and upload,none of which are accurate. The quoted line below is what the so called futher diagnotics screem deplays at the bottom. "If you continue to encounter a problem wi

  • AIX core dump file,

    Hi In AIX core dump file, we got this message 'SOFTWARE PROGRAM ABNORMALLY TERMINATED'CORE FILE NAME /scclive/oracle/inst/apps/SCC_ebsprod/ora/10.1.2/forms/core PROGRAM NAME frmweb We are getting these errors frequently when there was some network is

  • Input does not work when not focusing the desired track

    Hello Sitting and working on a track here pretty much for the first time in logic X. I work with much outboard gear so I always send channels out and back into an input. The input channel which comes from the outboard gear now gets muted if I do not