Cannot connect to file share since upgrading to Lion

Since i updated my desktop Mac Pro from the snow cat to Lion, i can no longer connect remotely to file shares (from two different MacBook, both also running Lion). The Mac Pro shows up in Finder ok and automatically, but when i try to connect, via Connect As and specifying the proper login, it fails with a vague error. The same if i try connection via Apple ID. If i try to connect via Cmd+K and entering afp://MyMacPro.local, i get asked for a password, then shown the proper list of available shares (i don't get that far when connecting via the Finder's sidebar!), but after selecting one, it still fails, with the same vague ("there was a problem connecting") error.
if i try to connect from terminal with mount_afp, i get an error -1069:
MyMacBook:~ mh$ mount_afp afp://MyUser:[email protected]/MyShare /Volumes/test
mount_afp: AFPMountURL returned error -1069, errno is -1069
i have of course tripple-checked that file sharing is still enabled on my Mac Pro, and that the firewall is disabled. i *can* connect in the oposite direction, frommy Mac Pro to the laptops.
Any ideas or suggestions?
thanx,
marc

I have the same issue. I can't find anything on here that works to fix it. Worked just fine this morning before I had to install the upgrade. Grr. Any other ideas?

Similar Messages

  • Can't always connect to remote speakers since upgrading to lion

    In one fell swoop I did a lot of upgrading, and ever since I haven't been able to reliably connect to any remote speakers using iTunes on my iMac.  From iTunes (or the Remote app on the phone or iPad) I can see remote speakers, but I cannot connect.  From iTunes, I just get the stripy progress bar, and it won't ever go away unless I cancel out.  From the remote app, it just becomes unrepsonsive.
    Context:
    I have a iMac with OSX Lion, that I upgraded from Snow Leopard a few weeks ago. At about the same time, I updated iTunes to 10.5 from the last 10.4 release to be able to get the IOS 5 update on my and my wife's phones.
    I have an Airport Extreme connected to our broadband, with 3 airport expresses in various places in our house connected on a wireless network to stereos for remote speakers.  The iMac is connected to the Airport Extreme via ethernet.  After upgrading the OS and iTunes, I got a notice that there was a firmware update for my two most recent airports (the Extreme and one of the expresses).  They are running version 7.6 of the firmware, the other two airports are running 6.3.
    There has been no change to the physical environment -- no sources of interference or anything like that.  I can play music from the Music app on my phone to any of the remote speakers, there is no problem there. 
    About half the time, if I restart everything (wireless base stations, and then the computer) I can get the remote speakers to work.  However, the next time the computer wakes up from sleep mode, I have the same connection problem described above.
    Has anyone else experiences these sorts of troubles?  I have seen some similar problems with older versions of all these applications and OS's -- and the solution there was to turn off ipV6 -- however, it doesn't look like that's an option now.  Is this an identified bug, and is there a fix on the way?  Is there anything I can do in the meantime?

    Well, after some experimentation and internet-lookin', I deduced that is possibly a wi-fi problem.  It seems that many people are having wi-fi problems since upgrading to Lion, and although I'm not connecting directly to my wireless network, it does form a pretty big chunk of my setup describe above.
    So I tried the fix outlined on OSX Daily here: http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/
    Essentially what it has you do is to create a new network location, name it, and then renew your DHCP lease.  This seems to have worked for the time being.

  • I cannot get iWeb to open since upgrading to Lion.

    Since upgrading to Lion, I cannot get iWeb to open.  The the top title bar comes up but I cannot open or create new pages.  Checked this on my mum's iMac and it has the same issue.
    Any thoughts in resolving?
    MG

    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    You can download an already compiled version with this link: iWeb Switch Domain.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • Cannot  connect to file shares on Yosemite server v4.0

    I have a fairly new installation of a Mac Mini Server.  As a Linux specialist I find some of the things frustrating but the rest of the office has a much easier life as things just work. Except for file sharing. If I use finder, use the shared section of the to display the network, find my server and double click to open up file share options, it refuses and says it cannot connect. I then use Finder>Go>Connect to Server and enter the SMB Server name as smb://[SERVER_NAME]/ and it immediately connects and I can connect to all drives successfully.
    When I check the system.log after after the unsuccessful connect attemt using Finder, The following is in the log:
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: label: default
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: dbname: od:/Local/Default
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: mkey_file: /var/db/krb5kdc/m-key
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: acl_file: /var/db/krb5kdc/kadmind.acl
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: uid=0
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: netr probe 0
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: init request
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: init return domain: BRTSRV00-IDENTI server: BRTSRV00 indomain was: <NULL>
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: uid=0
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: init request
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: init return domain: BRTSRV00-IDENTI server: BRTSRV00 indomain was: <NULL>
    Feb 11 09:08:13 brtsrv00.identitylabs.uk kdc[25915]: Got a canonicalize request for a LKDC realm from local-ipc
    Feb 11 09:08:13 brtsrv00.identitylabs.uk kdc[25915]: Asked for LKDC, but there is none
    Feb 11 09:08:13 brtsrv00.identitylabs.uk sandboxd[582] ([25915]): kdc(25915) deny file-read-data /private/etc/krb5.conf
    Feb 11 09:08:13 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: uid=0
    Feb 11 09:08:13 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: init request
    Feb 11 09:08:13 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: init return domain: BRTSRV00-IDENTI server: BRTSRV00 indomain was: <NULL>
    Feb 11 09:08:13 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: uid=0
    Feb 11 09:08:13 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: init request
    Feb 11 09:08:13 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: init return domain: BRTSRV00-IDENTI server: BRTSRV00 indomain was: <NULL>
    Feb 11 09:08:13 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: uid=0
    Feb 11 09:08:14 brtsrv00.identitylabs.uk digest-service[27507]: digest-request od: ok user=BRTSRV00-IDENTI\\ghorne proto=ntlmv2 flags: ENC_128, NEG_VERSION, NEG_TARGET_INFO, NEG_NTLM, NEG_TARGET, NEG_UNICODE
    Feb 11 09:08:14 brtsrv00.identitylabs.uk rpcsvchost[27362]: passwd entry for uid=1031 homedirectory invalid
    If I connect using Finder>Go> Connect to Sever I get the same error but the difference is the file shares are visible in the "Select the volumes you want to mount box" and I can mount the shares with no additional errors successfully. Please excuse me I am not very graphically savvy with OS-X (or OS-X for that mater). (Happy with Solaris, OpenBSD or Linux) I am a command line junkie (deep linux dude). Struggling to find my way around some of the things Apple DO. I am not sure I like people taking some of my toys and levers away.
    Any clue how to solve this issue?

    I am using fully qualified domain names for all servers on my network.  I have multiple domains untold virtual machines etc and services everywhere as it is a dev environment.  I use smb://brtsrv00.identitylabs.uk/ and it works without fault. Still no authentication from the Finder discovery.  Sorry I am a bit knew to to OS-X even though I have used different MacBook's for over 7 years.  DO a lot of VMware Fusion server development so don't touch OS-X much.  By the way, the name is provided by DNS and both the forward reverse lookup is correct. (dig brtsrv00.identitylabs.uk and dig -x 10.0.1.3)

  • I cannot connect to Ibooks store since upgrading to OSX Mavericks

    Imac 3.06 4meg. OSX 10.9.4  I have not been able to connect to the Ibooks store since updating to Mavericks.  Any help please. Brian.

    Hello ARBUTHNOT37thobbs,
    Thanks for using Apple Support Communities.
    Since the iBooks Store utilizes the same service as iTunes Store, please follow the troubleshooting in the article below for your Mac.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Take care,
    Alex H.

  • Since upgrading to LION unable to connect to wifi, in system preferences it says wifi off - cannot override it, what should i do?

    since upgrading to LION unable to connect to wifi, in system preferences it says wifi off - cannot override it, what should i do?

    While we all have MacBooks in this forum most of us don’t run Mountain Lion. There's a Mountain Lion Support Community where everybody has Mountain Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/os_x_mountain_lion

  • Since upgrading to Lion I cannot connect to my Buffalo Terastation

    Since upgrading to Lion I cannot connect to my Buffalo Terastation and get the following message. "The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem".  I have updated the firmware on the Terastation but still can’t connect to it. I have also posted this message on the Buffalo forum. Any suggestions?

    Lion changed the rules for NAS communication.  See this Web page.  As that page dates from last July, I'd hope that NAS vendors would have fixed things by now.  I'd ask Buffalo directly whether that product supports the protocol(s) described in that article.

  • Safari works great on my iMac, but not so well on my Macbook Pro since upgrading to Lion.  I get a message that I am not connected to the internet when I try to open a webpage even though the wireless icon at the top of my screen shows I am connected.

    Since upgrading to Lion I am having problems with Safari on my Macbook Pro.  I am using wifi to access the internet and the internet works in all other application except for Safari.  When I try to access a webpage most times I get a error message saying I am not connected to the internet.  If I click on diagnose the problem, I get connect again to the internet through the diagnostic process and the webpage generally works.  This is not a problem when wired to the internet.

    Check your network settings, in particular the advanced setting "DNS Server". If it is by chance 127.0.0.1, make sure to change is and use a know DNS Server (from Google for example, or your own Router local address).

  • All of my apple sets (iphone, ipad and computer) cannot connect the app store since yesterday, what's wrong with the app store?

    All of my apple sets (iphone, ipad and computer) cannot connect the app store since yesterday, what's wrong with the app store? do you know? or do you have have the same experience?

    I still have access.  Must be your phone or your internet connection.

  • Cannot open preview at all since upgrade to Mavericks

    cannot open preview at all since upgrade to Mavericks

    It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.
    If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

  • Since upgrading to Lion OS, the wifi connectivity keeps blocking up intermittently and we need to manually keep switching on and off the wifi utility to get the connection back. even locking the preferred wifi network in system preferences does not help.

    Since upgrading to Lion OS 10.7.1, the wifi connectivity keeps blocking up intermittently and we need to manually keep switching on and off the wifi utility to get the connection back. even locking the preferred wifi network in system preferences does not help. This never used to happen with Snow Leopard

    This is a big thank you to Rys Sinnefeldt who posted this fix.
    Rys has made this fix very easy to do and takes literally 2 mins. It involves replacing the Atheros Lion driver 4.0 and replacing it with the snow leopard driver. Don't worry, Rys has made this so simple to do even I could do it and so far I have had no more wifi drops.
    follow this link
    http://rys.pixeltards.com/2011/09/04/osx-lion-wifi.html
    Thanks again to Rys.

  • Since upgrading to LION, stuffit doesn't work (get message Power Pc apps no longer supported)  So, how to I unzip RAR files now?!?

    since upgrading to LION, stuffit doesn't work (get message Power Pc apps no longer supported) So, how do I unzip .RAR files now?!?

    Use the current version of Stuffit Expander.
    (63916)

  • Since upgrading to Lion, i am unable to take screen shots.  i get the message that i don't have permission to save files to the place where SSs are saved.  how can i regain the ability to save screen shots?  thanks

    since upgrading to Lion, i am unable to take screen shots.  i get the message that i don't have permission to save files to the place where SSs are saved.  how can i regain the ability to save screen shots?  thanks

    First of all, are you using the OS native screen capture?
    If not, make sure the application you're using has been update for Lion.  I was using Snapz Pro for years, but I need to update it for use with Lion. Meanwhile Grab and the keyboard shortcuts are working on my Lion load.
    If you are using the native capture mode unsuccessfully, I would run the Disk Utility and repair permissions on the drive. For some reason, even in past OS Versions, routine maintenance of permissions makes life a lot easier.

  • Since upgrading to Lion, my MacBook Pro is super slow connecting to Wi-Fi. Not so with Daughter's Snow Leopard or Wife's Dell.  Any ideas?

    Since upgrading to Lion, my MacBook Pro is super slow connecting to Wi-Fi (seems to search forever).  This is not the case with my Daughter's MacBook (still on Snow Leopard) or my Wife's Dell (Windows 7).  Any ideas?

    Hold Option when you click on the Airport in the top bar & post the stats.

  • Since upgrading to Lion USB devices no longer connect to my virtual machine in parallels despite my parallels settings.

    Since upgrading to Lion USB devices no longer connect to my virtual machine in parallels despite my parallels settings. As a result all usb devices show as networked drives from the mac. Therefore cannor access encrypted part of drive. Any ideas???

    I actually have the same problem, since I upgraded to Mavericks my MacBook Pro can't seem to find the Bose sounddock 10. Has anyone found a solution to this.
    It still works with the iPhone 5
    Thank you

Maybe you are looking for

  • Using my .mac account on iChat AV (problems)

    Hi, I've been using iChat AV with my .mac account since december, and it was all fine 'til some weeks ago. From the end of may 2006 I have many problems using my .mac account in iChat AV. Sometimes I can connect, but usually I can't connect! And the

  • How to add a file as an object in Numbers spreadsheet

    In MS Excel one can add any file namely doc, xls, PDF as an object in a spreadsheet......how can we do that in MAC Numbers

  • On-premise High-trust App and 401 (appredirect.aspx) for anomyous user

    Hello, I've developed a provider hosted App. The App can be used by authenticated and anonymous users. On my development platform the App is working in both cases as expected. Then I configured a new test Server (I did all the steps for high trusted

  • Deletion flag for customer

    Hi all, I set a Deletion flag for a customer in xdo6, when i am trying make the sale order system is giving only warnning message and allowing me to make the sale order. But i need a error message and should not allow me to make the sale order , supp

  • Sql loader & decimal point

    Hello, I need to import data with field containing floating point number. When I do this load on linux it goes ok. But when I try to load the same data from my windows there is problem with decimal point character. (My oracle server is 9i on linux).