Cannot connect to ftp server other than in safe boot

hello. After updating to 10.6, no ftp client in my use will connect or upload to an ftp server. Apple's finder (connect to server) shows the remote contents, but will not upload. Dreamweaver, FileZilla, Cyberduck and ClassicFTP don't connect at all. None of these occur in safe mode, which should indicate a conflict with third party software—however, which one could that be? I turn off all firewalls (including the system's); what else? I run Butler, no other third pary software. Anyone had that, or any idea?
Thanks

Could it be a signal? Have a look here http://suite101.com/article/2012-end-of-the-world-predictions-by-nostradamus-a148071
On a more professional note, I think it is best to contact the host, he/she is sure to help you.
Gramps

Similar Messages

Cannot connect to ftp server

We have three MBPs in an external office connecting via internet to our main FTP server in another office. One connects perfectly via the GO > Connect to server > address > user and password login. The server mounts on the desktop as it should. The other two cannot. The process skips the > user and password login phase and they connect as guests with no access. If you click on the Disconnect button then the Connect As flashes for a microsecond and disappears.
They all connect perfectly with the Firefox Fire FTP. It appears that the OS has memorised some setting and and uses that setting for their connection through the GO> Connect to server window. How would you fix that?
Thank you very much
antonio

Port 21 is the control port. You also need to open the data port. Given typical modern network configurations with two firewalls (on the client network and on the server network), both active and passive transfers can be blocked, too.
Here's some stuff that describes the general sequence and some of the risks: [Configuring FTP Services On Mac OS X|http://labs.hoffmanlabs.com/node/942] and [Why You Don't Want FTP; Firewalls And Ephemeral Ports|http://labs.hoffmanlabs.com/node/530]
It's vastly easier to use sftp. Open port 22, and Bob's Your Uncle; you're done. And you're also not showing off your username and password to everybody in the coffee shop (unlike ftp), and you can choose to set up a no-password or a passphrase-based login using certificates.

Cannot Connect To FTP Server (Waiting For Server)

no matter what I do, I am unable to connect to my FTP server. In dreamweaver when I try and connect my site, it just keeps saying waiting for server. I have also just recently downloaded filezilla to see if it was dreamweaver that was messing up, and it turns out, it wasn't! because I am having the same problems on there too, when I try and connect to my site in filezilla, it just times out. I have disabled all my firewalls, played around with every setting possible (turning mt FTP from passive to active etc) whats going on? is the server playing up? someone help me please! I have had no problems like this before, it only began yesterday.

Could it be a signal? Have a look here http://suite101.com/article/2012-end-of-the-world-predictions-by-nostradamus-a148071
On a more professional note, I think it is best to contact the host, he/she is sure to help you.
Gramps

ITunes tells me there is an update (5.1) but it never gets any further than trying to connect to the iPad server. I've tried updating directly from my iPad and it too times out saying it cannot connect to any server. My regular Apple updates work fine.

iTunes tells me there is an iOS update (5.1) but it never gets any further than trying to connect to the iPad server. I've tried updating directly from my iPad and it too times out saying it cannot connect to any server. My regular Apple updates work fine.

I haven't updated yet. Apple's download servers have been too busy. Did you know you can update via wifi instead of connection to your computer?
Here's a description of the update. Not a lot of changes for iPad 1/2.
iOS 5.1 Software Update
http://support.apple.com/kb/DL1504
You can wait a while & update at your convenience.
 Cheers, Tom

I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks

I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks

If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.

How to invoke a service on a server other than local bpel server?

Hi,
Im trying to invoke a service on a server other than the local bpel server thats installed by default. Any pointers to how this can be achieved? My jedevelper does not show "Bpel process Manager server" under the connections navigator and hence I cannot create a new connection to a different server(other than the default one). Appreciate yr help.
Thanks,
-L

If you only want to just invoke the service, you dont need a new connection.
Cant you just point to the wsdl of the service in the partnerlink ?
If you need a new connection in jdeveloper to the other server, you first need to make the new applicationserver connection and after that the integrationserver connection.
After this you can connect to an other bpelserver, besides the default.

System Update -- Cannot connect to proxy server - SOLVED

I'm on a ThinkPad T61 running Windows Vista. When I try to download from System Update, I always get the error message "Cannot connect to proxy server."
I have tried connecting to the Internet directly via Ethernet rather than through a wireless router--it doesn't make any difference.
I have also uninstalled System Update and then installed the version I downloaded from lenovo.com--same result.
System Update is an exception in Windows Firewall, and I have even tried running System Update with Firewall disabled--ditto.
Can someone please help me?
Message Edited by Tim_Lenovo on 01-29-2008 02:49 PM
Solved!
Go to Solution.

I have discovered one other potential cause of this behaviour.
If your computer is attached to a Domain, ensure you are connected to the Domain using a profile that has administrator rights when attempting these upgrades.
I was using a local profile with administrative rights, on a network connection that was outside of the corporate LAN, and I was getting the "Cannot connect to proxy server" error.
When I connected to our Corporate LAN and logged on to the machine with an administrative profile, the Proxy Server error went away, and I was then able to connect and download my required updates.
Just an FYI if you are doing this inside a large, firewalled LAN running from Active Directory.

Westel 7500 DSL Router/Modem: Cannot connect to PPPOE server

Westel 7500 DSL Router/Modem: Cannot connect to PPPOE server
My DSL connection periodically slows down to a crawl [less than 56kbps actual transfer rate].
When I reset my DSL Modem it takes 30 MINUTES to 4 HOURS to reconnect.
The Main status screen shows DSL connected at 1700/448 kbps.
Advanced status WAN Status shows DSL connected but PPPOE not connected.
I cannot ping the ISP router or the DNS Server.

Margin (dB) - Signal to noise margin. 6 is pretty bad possibly unusable at times, 20 is very good. You normally want 12dB or better IIRC from back in my DSL days. The higher the number, the better to a point.
Line Attenuation - Measure the amount the signal has degraded. Below 20dB is excellent, above 50 is poor, fill in the dots for anything in between.
Hmm...
#1 Did you try connecting your modem directly to the NID?
Points to: http://www.dslreports.com/faq/1317
#2 If not, please do and retest those margins and Line Attenuation.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

BEFW11S4 v4 cannot connected to outside server

Recently i want to play one game on test server, but cannot connected to the server, i checked the test server ip receiving & send by typing ping ip in command prompt, the result is 100%loss. I have try many other ways and i know it's not my computer's problem.
Also, I try DMH option in advence interface, Still didnt work out.
Than I go to the Forwarding option, now this is my problem, I donno wut kind of application did the test server use, and i donno how to set this up.
Help!!

As you are not able to ping the ip address,open the router setup page and Disable Block Anonymous Internet Requests and click on Save Settings...
For the Game you are trying to play,You need to open ports for that particular game on the router..Try this link.

Networking - No Internet - Cannot Connect to the Server

I have an old Intel Mac Mini running Leopard (10.5.8, I think) and connected to a wifi network created by a Time Capsule connected to a DSL router. I use the Mini (connected to a widescreen TV) mostly as a media center for Hulu, Netflix, iTunes, and iPhoto. The wifi network works fine for my laptop and iPhone, etc., but for some time now neither Safari nor Software Update has been able to access the internet from the Mac Mini. Instead I get a message that 'Safari cannot connect to [the URL] because Safari cannot connect to the server', and a recommendation to check my internet connection and try again. But I appear to be connected to my wifi network, Network Diagnostics says my internet connection appears to be working normally, and--most important--iTunes DOES connect to the internet to download podcasts etc. without any problems. I went to Network Preferences > Security > Firewall and found that iTunes was set to allow connections while Safari was set to block them--but authorizing Safari to allow connections didn't fix the problem even after a restart. (Also, because Software Update doesn't show up in Applications or Utilities, there doesn't seem to be any way to select Software Update under the firewall, which is understandable but also suggests that the problem is elsewhere.) So I turned the firewall off entirely and restarted but that didn't help either. Does anyone have any idea what to do? Thanks.

Camelot-
Thanks. I see it but I don't know what it means: The pane is set to configure proxies manually (the only other option is to configure using a PAD file). There nothing checked under 'Select a protocol to configure' and nothing entered in the 'FTP Proxy Server' box. In the 'Bypass proxy settings for these Hosts and Domains' box there are two entries (separated by commas) for '*.local' and 'nnn.nnn/nn' (with the n's representing numbers). The 'Use Passive FTP Mode (PASV)' checkbox is checked. Does anything here sound problematic, or is there anything else I can check? Also, FYI, iTunes stopped connecting too after I had started downloading small podcasts individually to check the connection after making various changes to the firewall (but restoring the firewall back where it was didn't get iTunes back). Thanks very much.
-Jim

[SOLVED] Cannot connect to NFS server.

I'm trying to setup a NFS share at home. I have one laptop configured as a server, and one desktop client. Both are running Arch. I can ping both in either way.
For some reason, I cannot connect to the server. At one time, I could connect, but only while having an empty /etc/hosts.deny file (which obviously is very insecure). Now, I cannot even reproduce this.
Thus, I believe the problem is caused by either /etc/hosts.allow or / and by /etc/hosts.deny.
Here is my server's /etc/exports:
/shared 192.168.x.xxx(rw,sync,no_subtree_check,no_root_squash)
And here its /etc/hosts.allow:
ALL:192.168.0.0/255.255.255.0
And finally its /etc/hosts.deny:
ALL: ALL: DENY
Running 'rpcinfo -p' on the server shows output, while running 'rpcinfo -p <server-ip>' on the client prints out 'No remote programs registered.'
From what I've read, when the client wants to connect to the server, the server first checks in hosts.allow to see if the client's allowed to connect. So in my case, it should be able connect.
However, when I run
sudo mount -t nfs 192.168.x.xxx:/ /mnt/SERVER
it tells me
mount.nfs: mount to NFS server '192.168.x.xxx:/`failed: RPC Error: Program not registered
And even if outcomment both hosts.deny and hosts.allow, running the same command prints out
mount.nfs: access denied by server while mounting 192.168.x.xxx:/
I'm clueless. Any help would be greatly appreciated!
Last edited by MrAllan (2009-03-20 15:05:24)

tomk wrote:
Missed a detail on first reading. Your server's exports file makes the /shared directory available to 192.168.x.xxx, but your client mount command tries to mount the server's / i.e. root directory. You can only mount directories that have been exported.
btw, there's no need to conceal internal addresses like that - we all have them, and there's no way anyone can use them to track you down. My laptop address is 10.12.62.99, my server is 192.168.10.10, and my irssi/bittorrent/whatever machine is 192.168.10.69. I challenge anyone to hack me.
But if they know his IP, couldn't they use the lan IP to gain access easier than if they didn't know the subnet addresses? Since the thread is solved, I figured I would ask since I've always wondered about it.
Btw, for anyone have unresolved NFS issues, see this bug report. The arch devs aren't responding to it for some reason, can anyone tell me why?
http://bugs.archlinux.org/task/13434

Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
Below is a summary of the issue:
After selecting datasheet view beow error occurs:
    "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available."
    "Unable to retrieve all data."
    The item counts displays say 100 out of 14000 items.
Exporting List to excel is giving only 2000 records out of 14000 records.
Other Observations   -
This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
I have checked the Alternate access mapping setting ,its fine.
It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
I checked below links also ,but doesn't seem to work in my case.
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
I am sharing my finding.
1. First install the
KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
These two steps resolved the issue in our environment. Hope it might help others as well.
Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

Can't save BISM file pointing to excel sheet (data source). ErrMsg: "There were errors found while validating the page: Cannot connect to the server or database."

Hi,
Me and a collegue is administrering our new enterprise BI portal in SharePoint 2013 (On Premise) and have a problem with using a specific Excel file including general ledger data as data source through a BISM file.
This particular BISM file can't be saved without getting the error message "There were errors found while validating the page: Cannot connect to the server or database."
BISM files against other Excel sheets and sources (for example SSAS tabular databases) works well.
Can anyone help us pinpointing whats wrong here, this is a really important stakeholder in our organization requesting this reporting?
Cheers!

Hi E.SWARD ,
My self created a Power pivot excel then i want to use this excel to create BI file . Still i am getting the same error . Pls help me to resolve this issue
Cannot connect to the server or database.
I am getting the similar error , if i use Tabular analysis server instance .
Subhash

My mini iPad will not connect to the internet. Getting a message that it cannot connect to the server. What is this and how do I fix it?

My mini iPad suddenly will not connect to the internet or retrieve my email. I'm getting an error message that says "cannot connect to the server". How do I fix this?

Nevermind. I found the answer from someone else's question. Thank you.

Error connecting to ftp server

Dear All,
I'm doing file to file scenario through XI. The receiver communication channel is a normal file adapter and it is working perfectly fine . My sender communication channel is a FTP adapter. I'm trying to send a file from FTP to a folder on my integration engine. When i went into adapter monitoring, i got the error in the sender file adaper for ftp. The error is - " Error connecting to ftp server ".
normally, i'm able to do the ftp from integration server to my ftp server, but through XI , it is giving me the above mentioned error. I think some of my properties are not specified correctly. Kindly advise . The properties that i have specified in the ftp adapter are -
adapter type - file
transport protocol - ftp
message protocol - file
adapter engine - integration server
server - ip address of the ftp host
port - 21
username - username of the ftp server
password - password of the ftp user
connect mode - per file transfer
transfer mode - binary
folder - name of the folder created on the ftp root directory ( without the path ) Do i need to give the full path here ?
file name - file in the above specified folder
Kindly let me know.
Regards.
Naveen

HI Naveen,
This link explains all the parameters that need to be entered for a file adpater. Just check it out and compare it with your values and your FTP settings.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
//folder - name of the folder created on the ftp root directory ( without the path ) Do i need to give the full path here ?
Yes, i think you should specify the full path here.
Regards,
bhavesh

Cannot connect to ftp server other than in safe boot

Similar Messages

Maybe you are looking for