Cannot connect to hamachi servers
I try to connect to the servers I uninstall and install three times but it still does not work and I cannot connect to the servers while my friends can pls help
The activation servers are probably overloaded with everyone trying to update to iOS 7 today. You might need to wait and try again later.
Similar Messages
-
Cannot connect to network servers after recent security update on OSX 10.5.8
I can no longer connect to others servers/PC's on the network at my brothers office. I had no problem the last time I was in there. The only thing that has changed is that I did the latest security upadate from Apple.
There should be no reason why I no longer access files from other devices on the network, that I previoulsy been able to access with no problems.
*** is going here APPLE?This not being an iTunes issue, I'd suggest you post in the Mac OS X 10.5 Networking forum. If anyone knows a fix, you'll probably find it there.
Good luck. -
Yesterday Firefox did an automatic update. I was in a hurry out the door when I chose what I think was the wrong option. The options were., "Allow Always, "Allow only Once, or "Do Not Allow". I either chose allow only once, or do not allow because now I cannot connect to any server through Mozilla Firefox. How do I fix this problem?
Was that a message from your firewall?
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls -
Cannot connect to remote servers or exchange email?
I have the same issue and can connect via any other connection including Att hotspots, wifi etc etc. I do not think the issue is related to my system and to clarify, I am not connecting via VPN. Any help on this is greatly appreciated.
VZW mobile broadband devices sit behind a NAT firewall. The NAT hides your public IP Address and the firewall blocks custom ports from communicating to devices on the VZW network. Pending on what you are trying to do on your remote servers or exchange servers one of the other is likely broken due to the nature of the VZW network.
The work around is to setup a VPN to a VPN server that allows you to make the customizations that you need to support your applications. That or buy a static IP address from VZW for $500. That or configure your applications to communicate over the internet over more traditional protocols and ports.
Contact your system or network administrators in charge of your remote servers to find out what the requirements are for connecting to them. See if they can offer you any work arounds or custom configurations. Chances are others have the same limitation and they already have something cooked up to work around it. -
Cannot Connect to Apple Servers
I first noticed this problem when I tried to watch trailers on Apple's QuickTime page and I got a white question mark superimposed over the QuickTime logo. I figured it was a codec issue, so I tried to reinstall the program and it still didn't work. I tried to check for updates and it said that it could not establish a connection to the QuickTime Software server. Since the program works fine playing offline files and I can play .mov files embedded in non-Apple sites, I figure that the problem is not with the software, but with the server. Any ideas on how to fix this?
Just to update, I also installed iTunes, and that program won't connect to the online store.
-
Adobe Connection Manager unable to connect to Adobe Servers
Hello,
I have found many threads for that topic, but non helped me solve my issue.
I haven't been using my application in quite a few months. A few weeks ago I started again and always get the message that my membership could not be verified because it cannot connect to the Adobe Servers. I started the Application Manager and get the same message there.
I tried everything in this document: http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html and all steps are successful
I tried to connect my laptop directly with the LAN cable to the modem, still no success
I don't use any Proxies.
I disabled my firewall and Antivirus, Spyware, etc. applications, still it says it cannot connect.
I tried to download the Desktop Application, but also get the message it cannot connect to the servers.
I really do not know what to check anymore. I have no problems with secure sites or anything else I am using.
Any suggestions what else could be the problem?
Side note: It says to set the clock correctly. What time yone does it check against? My Windows is German, he CC is German, I am in Germany and use the correct timezone. I often use the US formatting of numbers and date formats, because I need it hat way for work. I tried it with both US and German settings, though. Makes no difference.
Thank you!If you are a home user then enable the Hidden admin, restart and try to update/activate. Check here for instructions on enable/disable Hidden admin : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/
If connected to corporate network then contact your IT department to see if Firewall or Proxy server is blocking the activation.
Thanks!
Ankit -
PhoneGap Build:Cannot Connect to Server Dreamweaver CS6
Hey guys, I was wondering if someone could fix this problem, Im having, i have Dreamweaver cs6 on a mac, And im trying to login to phonegap build in dreamweaver, but everytime i try, it tells me that it cannot connect to the servers, plz try again later, is this a known problem?
thanks,
JonathanI have a phonegap account and it's linked to the Adobe account;
Logging in phonegap.com and compiling my apps in their website, works just fine;
I have always Dreamweaver signed in to the Adobe account;
Here are the content of my files:
init_status.txt: {"message": "Failed to upload application. Unable to create zip file. Reason: null","error": 404}
auth_status.txt: {"statusCode": 200,"statusMessage": "Authenticated"}
Hope this helps you help us.
I just want to say that this was THE feature that made me buy CS6 in the first place, and it's not working as intended. -
Cannot connect to Session broker server, but can to other servers in Cluster
Hi Everyone,
Hopefully this is the right place to post. Have searched quite a bit through the forums (not all 19000+ pages though), and can't seem to find a similiar issue.
I have also searched the internet and tried all solutions others with a similiar problem have.
This is my problem:
We have two servers running Server 2008 R2, set up as Remote Desktop Servers in a cluster setup.
The session broker is located on the second server (This is an active server which has sessions load balanced to it). There is also a DNS round robin setup
Problem: When sessions are allowed to be load balanced on Server2, then the users cannot connect to the cluster. The round robin seems to still send some sessions to the first server, and these seem to connect fine.
I suspected the issue was with the WMI Respository, and so started. I found a lot of errors, but have been unable to fix them.
I downlaoded the WMIDiag from Microsoft, and here is the report:
48866 15:56:44 (0) ** WMIDiag v2.1 started on 15 April 2015 at 15:48.
48867 15:56:44 (0) **
48868 15:56:44 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
48869 15:56:44 (0) **
48870 15:56:44 (0) ** This script is not supported under any Microsoft standard support program or service.
48871 15:56:44 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
48872 15:56:44 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
48873 15:56:44 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
48874 15:56:44 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
48875 15:56:44 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
48876 15:56:44 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
48877 15:56:44 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
48878 15:56:44 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
48879 15:56:44 (0) ** of the possibility of such damages.
48880 15:56:44 (0) **
48881 15:56:44 (0) **
48882 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48883 15:56:44 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
48884 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48885 15:56:44 (0) **
48886 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48887 15:56:44 (0) ** Windows Server 2008 R2 - Service pack 1 - 64-bit (7601) - User 'MIBCO\CONN.LOMBARD' on computer 'SSCRDS02'.
48888 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48889 15:56:44 (0) ** INFO: Environment: .................................................................................................. 1 ITEM(S)!
48890 15:56:44 (0) ** INFO: => 3 possible incorrect shutdown(s) detected on:
48891 15:56:44 (0) ** - Shutdown on 05 December 2014 22:55:28 (GMT-0).
48892 15:56:44 (0) ** - Shutdown on 12 December 2014 06:43:00 (GMT-0).
48893 15:56:44 (0) ** - Shutdown on 27 February 2015 05:19:26 (GMT-0).
48894 15:56:44 (0) **
48895 15:56:44 (0) ** System drive: ....................................................................................................... C: (Disk #0 Partition #1).
48896 15:56:44 (0) ** Drive type: ......................................................................................................... SCSI (DELL PERC H700 SCSI Disk Device).
48897 15:56:44 (0) ** There are no missing WMI system files: .............................................................................. OK.
48898 15:56:44 (0) ** There are no missing WMI repository files: .......................................................................... OK.
48899 15:56:44 (0) ** WMI repository state: ............................................................................................... CONSISTENT.
48900 15:56:44 (0) ** AFTER running WMIDiag:
48901 15:56:44 (0) ** The WMI repository has a size of: ................................................................................... 26 MB.
48902 15:56:44 (0) ** - Disk free space on 'C:': .......................................................................................... 297281 MB.
48903 15:56:44 (0) ** - INDEX.BTR, 5513216 bytes, 2015/04/15 03:52:21 PM
48904 15:56:44 (0) ** - MAPPING1.MAP, 76804 bytes, 2015/04/15 03:50:51 PM
48905 15:56:44 (0) ** - MAPPING2.MAP, 76804 bytes, 2015/04/15 03:52:21 PM
48906 15:56:44 (0) ** - OBJECTS.DATA, 22036480 bytes, 2015/04/15 03:52:21 PM
48907 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48908 15:56:44 (0) ** INFO: Windows Firewall status: ...................................................................................... ENABLED.
48909 15:56:44 (0) ** Windows Firewall Profile: ........................................................................................... DOMAIN.
48910 15:56:44 (0) ** Inbound connections that do not match a rule BLOCKED: ............................................................... ENABLED.
48911 15:56:44 (0) ** => This will prevent any WMI remote connectivity to this computer except
48912 15:56:44 (0) ** if the following three inbound rules are ENABLED and non-BLOCKING:
48913 15:56:44 (0) ** - 'Windows Management Instrumentation (DCOM-In)'
48914 15:56:44 (0) ** - 'Windows Management Instrumentation (WMI-In)'
48915 15:56:44 (0) ** - 'Windows Management Instrumentation (ASync-In)'
48916 15:56:44 (0) ** Verify the reported status for each of these three inbound rules below.
48917 15:56:44 (0) **
48918 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI)' GROUP rule: ............................................. ENABLED.
48919 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI-Out)' rule: ............................................... ENABLED.
48920 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI-In)' rule: ................................................ ENABLED.
48921 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (DCOM-In)' rule: ............................................... ENABLED.
48922 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (ASync-In)' rule: .............................................. ENABLED.
48923 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48924 15:56:44 (0) ** DCOM Status: ........................................................................................................ OK.
48925 15:56:44 (0) ** WMI registry setup: ................................................................................................. OK.
48926 15:56:44 (0) ** INFO: WMI service has dependents: ................................................................................... 2 SERVICE(S)!
48927 15:56:44 (0) ** - Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Disabled')
48928 15:56:44 (0) ** - SMS Agent Host (CCMEXEC, StartMode='Automatic')
48929 15:56:44 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
48930 15:56:44 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
48931 15:56:44 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
48932 15:56:44 (0) ** this can prevent the service/application to work as expected.
48933 15:56:44 (0) **
48934 15:56:44 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
48935 15:56:44 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
48936 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48937 15:56:44 (0) ** WMI service DCOM setup: ............................................................................................. OK.
48938 15:56:44 (0) ** WMI components DCOM registrations: .................................................................................. OK.
48939 15:56:44 (0) ** WMI ProgID registrations: ........................................................................................... OK.
48940 15:56:44 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
48941 15:56:44 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
48942 15:56:44 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
48943 15:56:44 (0) ** WMI providers EXE/DLL availability: ................................................................................. OK.
48944 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48945 15:56:44 (0) ** INFO: User Account Control (UAC): ................................................................................... ENABLED.
48946 15:56:44 (0) ** => WMI tasks requiring Administrative privileges on this computer MUST run in an elevated context.
48947 15:56:44 (0) ** i.e. You can start your scripts or WMIC commands from an elevated command
48948 15:56:44 (0) ** prompt by right clicking on the 'Command Prompt' icon in the Start Menu and
48949 15:56:44 (0) ** selecting 'Run as Administrator'.
48950 15:56:44 (0) ** i.e. You can also execute the WMI scripts or WMIC commands as a task
48951 15:56:44 (0) ** in the Task Scheduler within the right security context.
48952 15:56:44 (0) **
48953 15:56:44 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
48954 15:56:44 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
48955 15:56:44 (0) ** privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
48956 15:56:44 (0) ** to ensure that administrative privileges are granted. If a Local User account is used for remote
48957 15:56:44 (0) ** accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
48958 15:56:44 (0) **
48959 15:56:44 (0) ** DCOM security for 'Microsoft WBEM UnSecured Apartment' (Launch & Activation Permissions): ........................... MODIFIED.
48960 15:56:44 (1) !! ERROR: Actual trustee 'NT AUTHORITY\SYSTEM' DOES NOT match corresponding expected trustee rights (Actual->Default)
48961 15:56:44 (0) ** - ACTUAL ACE:
48962 15:56:44 (0) ** ACEType: &h0
48963 15:56:44 (0) ** ACCESS_ALLOWED_ACE_TYPE
48964 15:56:44 (0) ** ACEFlags: &h4
48965 15:56:44 (0) ** NO_PROPAGATE_INHERIT_ACE
48966 15:56:44 (0) ** ACEMask: &hB
48967 15:56:44 (0) ** DCOM_RIGHT_EXECUTE
48968 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
48969 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
48970 15:56:44 (0) ** - EXPECTED ACE:
48971 15:56:44 (0) ** ACEType: &h0
48972 15:56:44 (0) ** ACCESS_ALLOWED_ACE_TYPE
48973 15:56:44 (0) ** ACEFlags: &h0
48974 15:56:44 (0) ** ACEMask: &h1F
48975 15:56:44 (0) ** DCOM_RIGHT_EXECUTE
48976 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
48977 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
48978 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
48979 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
48980 15:56:44 (0) **
48981 15:56:44 (0) ** => The actual ACE has the right(s) '&h14 DCOM_RIGHT_LAUNCH_REMOTE DCOM_RIGHT_ACTIVATE_REMOTE' removed!
48982 15:56:44 (0) ** This will cause some operations to fail!
48983 15:56:44 (0) ** It is possible to fix this issue by editing the security descriptor and adding the removed right.
48984 15:56:44 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
48985 15:56:44 (0) **
48986 15:56:44 (0) ** DCOM security for 'Microsoft WBEM UnSecured Apartment' (Launch & Activation Permissions): ........................... MODIFIED.
48987 15:56:44 (1) !! ERROR: Actual trustee 'NT AUTHORITY\INTERACTIVE' DOES NOT match corresponding expected trustee rights (Actual->Default)
48988 15:56:44 (0) ** - ACTUAL ACE:
48989 15:56:44 (0) ** ACEType: &h0
48990 15:56:44 (0) ** ACCESS_ALLOWED_ACE_TYPE
48991 15:56:44 (0) ** ACEFlags: &h4
48992 15:56:44 (0) ** NO_PROPAGATE_INHERIT_ACE
48993 15:56:44 (0) ** ACEMask: &hB
48994 15:56:44 (0) ** DCOM_RIGHT_EXECUTE
48995 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
48996 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
48997 15:56:44 (0) ** - EXPECTED ACE:
48998 15:56:44 (0) ** ACEType: &h0
48999 15:56:44 (0) ** ACCESS_ALLOWED_ACE_TYPE
49000 15:56:44 (0) ** ACEFlags: &h0
49001 15:56:44 (0) ** ACEMask: &h1F
49002 15:56:44 (0) ** DCOM_RIGHT_EXECUTE
49003 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
49004 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
49005 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
49006 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
49007 15:56:44 (0) **
49008 15:56:44 (0) ** => The actual ACE has the right(s) '&h14 DCOM_RIGHT_LAUNCH_REMOTE DCOM_RIGHT_ACTIVATE_REMOTE' removed!
49009 15:56:44 (0) ** This will cause some operations to fail!
49010 15:56:44 (0) ** It is possible to fix this issue by editing the security descriptor and adding the removed right.
49011 15:56:44 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
49012 15:56:44 (0) **
49013 15:56:44 (0) **
49014 15:56:44 (0) ** DCOM security warning(s) detected: .................................................................................. 0.
49015 15:56:44 (0) ** DCOM security error(s) detected: .................................................................................... 2.
49016 15:56:44 (0) ** WMI security warning(s) detected: ................................................................................... 0.
49017 15:56:44 (0) ** WMI security error(s) detected: ..................................................................................... 0.
49018 15:56:44 (0) **
49019 15:56:44 (1) !! ERROR: Overall DCOM security status: ................................................................................ ERROR!
49020 15:56:44 (0) ** Overall WMI security status: ........................................................................................ OK.
49021 15:56:44 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
49022 15:56:44 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 5.
49023 15:56:44 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
49024 15:56:44 (0) ** 'select * from MSFT_SCMEventLogEvent'
49025 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
49026 15:56:44 (0) ** 'SELECT * FROM __NamespaceCreationEvent'
49027 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
49028 15:56:44 (0) ** 'SELECT * FROM __ClassOperationEvent WHERE TargetClass ISA "CCM_Policy_EmbeddedObject"'
49029 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
49030 15:56:44 (0) ** 'SELECT * FROM __ClassOperationEvent WHERE TargetClass ISA "CCM_Policy_Config"'
49031 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
49032 15:56:44 (0) ** 'SELECT * FROM __ClassOperationEvent WHERE TargetClass ISA "CCM_Policy"'
49033 15:56:44 (0) **
49034 15:56:44 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
49035 15:56:44 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 3 NAMESPACE(S)!
49036 15:56:44 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTTPM.
49037 15:56:44 (0) ** - ROOT/CIMV2/TERMINALSERVICES.
49038 15:56:44 (0) ** - ROOT/SERVICEMODEL.
49039 15:56:44 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
49040 15:56:44 (0) ** use an encrypted connection by specifying the PACKET PRIVACY authentication level.
49041 15:56:44 (0) ** (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
49042 15:56:44 (0) ** i.e. 'WMIC.EXE /NODE:"SSCRDS02" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
49043 15:56:44 (0) **
49044 15:56:44 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
49045 15:56:44 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
49046 15:56:44 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 34 ERROR(S)!
49047 15:56:44 (0) ** - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49048 15:56:44 (0) ** MOF Registration: ''
49049 15:56:44 (0) ** - Root/CIMV2, Win32_OsBaselineProvider, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49050 15:56:44 (0) ** MOF Registration: ''
49051 15:56:44 (0) ** - Root/CIMV2, Win32_OsBaseline, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49052 15:56:44 (0) ** MOF Registration: ''
49053 15:56:44 (0) ** - Root/CIMV2, Win32_DriverVXD, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49054 15:56:44 (0) ** MOF Registration: ''
49055 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49056 15:56:44 (0) ** MOF Registration: ''
49057 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49058 15:56:44 (0) ** MOF Registration: ''
49059 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49060 15:56:44 (0) ** MOF Registration: ''
49061 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49062 15:56:44 (0) ** MOF Registration: ''
49063 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49064 15:56:44 (0) ** MOF Registration: ''
49065 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49066 15:56:44 (0) ** MOF Registration: ''
49067 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49068 15:56:44 (0) ** MOF Registration: ''
49069 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49070 15:56:44 (0) ** MOF Registration: ''
49071 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49072 15:56:44 (0) ** MOF Registration: ''
49073 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49074 15:56:44 (0) ** MOF Registration: ''
49075 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_NETDataProviderforOracle_NETDataProviderforOracle, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49076 15:56:44 (0) ** MOF Registration: ''
49077 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_NETDataProviderforOracle_NETDataProviderforOracle, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49078 15:56:44 (0) ** MOF Registration: ''
49079 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49080 15:56:44 (0) ** MOF Registration: ''
49081 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49082 15:56:44 (0) ** MOF Registration: ''
49083 15:56:44 (0) ** - Root/WMI, ReserveDisjoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49084 15:56:44 (0) ** MOF Registration: ''
49085 15:56:44 (0) ** - Root/WMI, ReserveLateCount, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49086 15:56:44 (0) ** MOF Registration: ''
49087 15:56:44 (0) ** - Root/WMI, ReserveJoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49088 15:56:44 (0) ** MOF Registration: ''
49089 15:56:44 (0) ** - Root/WMI, ReserveDelete, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49090 15:56:44 (0) ** MOF Registration: ''
49091 15:56:44 (0) ** - Root/WMI, ReserveBandwidth, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49092 15:56:44 (0) ** MOF Registration: ''
49093 15:56:44 (0) ** - Root/WMI, ReserveCreate, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49094 15:56:44 (0) ** MOF Registration: ''
49095 15:56:44 (0) ** - Root/WMI, SystemConfig_PhyDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49096 15:56:44 (0) ** MOF Registration: ''
49097 15:56:44 (0) ** - Root/WMI, SystemConfig_Video, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49098 15:56:44 (0) ** MOF Registration: ''
49099 15:56:44 (0) ** - Root/WMI, SystemConfig_IDEChannel, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49100 15:56:44 (0) ** MOF Registration: ''
49101 15:56:44 (0) ** - Root/WMI, SystemConfig_NIC, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49102 15:56:44 (0) ** MOF Registration: ''
49103 15:56:44 (0) ** - Root/WMI, SystemConfig_Network, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49104 15:56:44 (0) ** MOF Registration: ''
49105 15:56:44 (0) ** - Root/WMI, SystemConfig_CPU, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49106 15:56:44 (0) ** MOF Registration: ''
49107 15:56:44 (0) ** - Root/WMI, SystemConfig_LogDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49108 15:56:44 (0) ** MOF Registration: ''
49109 15:56:44 (0) ** - Root/WMI, SystemConfig_Power, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49110 15:56:44 (0) ** MOF Registration: ''
49111 15:56:44 (0) ** - root/ccm/LocationServices, ClientInfo, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49112 15:56:44 (0) ** MOF Registration: ''
49113 15:56:44 (0) ** - root/ccm/LocationServices, ClientInfo, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49114 15:56:44 (0) ** MOF Registration: ''
49115 15:56:44 (0) ** => When a WMI performance class is missing (i.e. 'Win32_PerfRawData_TermService_TerminalServices'), it is generally due to
49116 15:56:44 (0) ** a lack of buffer refresh of the WMI class provider exposing the WMI performance counters.
49117 15:56:44 (0) ** You can refresh the WMI class provider buffer with the following command:
49118 15:56:44 (0) **
49119 15:56:44 (0) ** i.e. 'WINMGMT.EXE /SYNCPERF'
49120 15:56:44 (0) **
49121 15:56:44 (0) ** WMI MOF representations: ............................................................................................ OK.
49122 15:56:44 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
49123 15:56:44 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
49124 15:56:44 (0) ** WMI EXECQUERY operations: ........................................................................................... OK.
49125 15:56:44 (2) !! WARNING: WMI GET VALUE operation errors reported: ................................................................... 5 WARNING(S)!
49126 15:56:44 (0) ** - Root, Instance: __EventConsumerProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
49127 15:56:44 (0) ** - Root, Instance: __EventProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
49128 15:56:44 (0) ** - Root, Instance: __EventSinkCacheControl=@, Property: ClearAfter='00000000000015.000000:000' (Expected default='00000000000230.000000:000').
49129 15:56:44 (0) ** - Root, Instance: __ObjectProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
49130 15:56:44 (0) ** - Root, Instance: __PropertyProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
49131 15:56:44 (0) **
49132 15:56:44 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
49133 15:56:44 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
49134 15:56:44 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
49135 15:56:44 (0) ** WMI static instances retrieved: ..................................................................................... 6304.
49136 15:56:44 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
49137 15:56:44 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 3.
49138 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49139 15:56:44 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
49140 15:56:44 (0) ** DCOM: ............................................................................................................. 0.
49141 15:56:44 (0) ** WINMGMT: .......................................................................................................... 0.
49142 15:56:44 (0) ** WMIADAPTER: ....................................................................................................... 0.
49143 15:56:44 (0) **
49144 15:56:44 (0) ** # of additional Event Log events AFTER WMIDiag execution:
49145 15:56:44 (0) ** DCOM: ............................................................................................................. 0.
49146 15:56:44 (0) ** WINMGMT: .......................................................................................................... 0.
49147 15:56:44 (0) ** WMIADAPTER: ....................................................................................................... 0.
49148 15:56:44 (0) **
49149 15:56:44 (0) ** 34 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
49150 15:56:44 (0) ** => This error is typically a WMI error. This WMI error is due to:
49151 15:56:44 (0) ** - a missing WMI class definition or object.
49152 15:56:44 (0) ** (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
49153 15:56:44 (0) ** You can correct the missing class definitions by:
49154 15:56:44 (0) ** - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
49155 15:56:44 (0) ** Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
49156 15:56:44 (0) ** (This list can be built on a similar and working WMI Windows installation)
49157 15:56:44 (0) ** The following command line must be used:
49158 15:56:44 (0) ** i.e. 'WMIDiag CorrelateClassAndProvider'
49159 15:56:44 (0) ** Note: When a WMI performance class is missing, you can manually resynchronize performance counters
49160 15:56:44 (0) ** with WMI by starting the ADAP process.
49161 15:56:44 (0) ** - a WMI repository corruption.
49162 15:56:44 (0) ** In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
49163 15:56:44 (0) ** to validate the WMI repository operations.
49164 15:56:44 (0) ** Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
49165 15:56:44 (0) ** executing the WriteInRepository command. To write temporary data from the Root namespace, use:
49166 15:56:44 (0) ** i.e. 'WMIDiag WriteInRepository=Root'
49167 15:56:44 (0) ** - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
49168 15:56:44 (0) ** the WMI repository must be reconstructed.
49169 15:56:44 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
49170 15:56:44 (0) ** otherwise some applications may fail after the reconstruction.
49171 15:56:44 (0) ** This can be achieved with the following command:
49172 15:56:44 (0) ** i.e. 'WMIDiag ShowMOFErrors'
49173 15:56:44 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
49174 15:56:44 (0) ** ALL fixes previously mentioned.
49175 15:56:44 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
49176 15:56:44 (0) **
49177 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49178 15:56:44 (0) ** Unexpected, wrong or missing registry key values: ................................................................... 1 KEY(S)!
49179 15:56:44 (0) ** INFO: Unexpected registry key value:
49180 15:56:44 (0) ** - Current: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 0
49181 15:56:44 (0) ** - Expected: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 1
49182 15:56:44 (0) ** From the command line, the registry configuration can be corrected with the following command:
49183 15:56:44 (0) ** i.e. 'REG.EXE Add "HKLM\SOFTWARE\Microsoft\WBEM\CIMOM" /v "Logging" /t "REG_SZ" /d "1" /f'
49184 15:56:44 (0) **
49185 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49186 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49187 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49188 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49189 15:56:44 (0) **
49190 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49191 15:56:44 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
49192 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49193 15:56:44 (0) **
49194 15:56:44 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\USERS\CONN.LOMBARD\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2.SRV.SP1.64_SSCRDS02_2015.04.15_15.48.25.LOG' for details.
49195 15:56:44 (0) **
49196 15:56:44 (0) ** WMIDiag v2.1 ended on 15 April 2015 at 15:56 (W:110 E:41 S:1).
This seems to be the biggest problem:
48960 15:56:44 (1) !! ERROR: Actual trustee 'NT AUTHORITY\SYSTEM' DOES NOT match corresponding expected trustee rights (Actual->Default)
This seems to be the second biggest error (and there are a few of them):
0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
I have tried:
winmgmt /resyncperf
winmgmt /verifyrepository
winmgmt /salvagerepository
winmgmt /resetrepository
I have also tried registering the mof files with
MOFCOMP <FileName.mof>
Lastly, I even disabled the WMI service, renamed the Repository folder, and had it rebuild the repository.
I got stuck on re registering the 'NT AUTHORITY\SYSTEM' (I think it is in the Components section in Administrative tools), as I could not find clear instructions on exactly how to go about it.
Chkdsk found no errors
Sfc /scannow found no errors
winmgmt /verifyrepository finds no errors.
I'm hoping someone here might be able to steer me in the right direction to get this resolved, as I do not want to rebuild a server that hosts a connection broker and has over 100 user profiles on it, as well as some very annoying and finniky LOB apps installed,
which will have to manually be reinstalled for each profile.Hi,
Here is a blog regarding how to fix WMI issue might be useful to you:
Fixing WMI issues Using Batch Script
http://social.technet.microsoft.com/wiki/contents/articles/6887.fixing-wmi-issues-using-batch-script.aspx
In addition, you mentioned Remote Desktop Servers are in a cluster setup, would you tell us how did you create the cluster?
As far as I know, with RD Connection Broker, we don’t need to create a cluster but just add multiple RD session hosts into one collection, then RD connection Broker would redirect sessions automatically.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
I cannot upload my iPhoto book to the Online Store. I get an error message that I cannot connect. Instructs me to try again later. Apple support said servers are too busy. Anyone else have this problem and a solution?
I get an error message that I cannot connect. Instructs me to try again later.
Try again later?
LN -
I have an airport extreme and have airport utility version6.1. I have gone into airport utility and entered in the port 25565 into the public and private udp and tcp. i also have reseved the dchp and put in my mac adress as well as entered in the ip adress straight from the network section in preferences. In my minecraft server properties I have left the ip blank. I have used a port checker tool and it says it cannot connect to the port on tcp with 25565. I have no idea why this is happening because I entered everything in correctly. I would really appreciate it if someone were to help me.
You will need to set your Mac up to have a static IP address on your internal network. This can be found in System Preferences>Network:
You will want to select DHCP with manual address. -
Just recently I notice that quite often I cannot connect to sites using Safari (7.0.6). I am using the Mavericks 10.9.4 OS. Often when I go to somewhere else, I can connect and then back at home the connection works. However, the connection at home can suddenly decide not to connect to these sites. I am not sure whether it is a problem with my router or not, but then again, Chrome does connect to these sites as well as windows 7 (even when using Safari on windows). So it seems like there is some issue with my Mac at my home. But not always - so this is the confusing part.
Has anyone else seen this kind of behavior? If so, I'd appreciate, if not a solution, at least some cause for this.
Thanks.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path ".+s/Resources" -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press thereturn key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press returnthree times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
PI 7.11: Cannot connect to server using message server:...
Hello Guys,
we make the Application Management for a Customer PI System.
Scenario:
- the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
- WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
Problem:
Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
"Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
In the Details from the Error Message:
"<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
Sorry for my bad English
Best Regards,
MarkusHi Markus,
did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented. There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
(This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
Solution: Establish a connection without any proxy in between.
E.g.: a terminal server in the same network
It would be helpful to find more people with the same problem to force a fix from SAP for that.
If anyone else is having problems with this, please add a comment to this thread.
Best regards
Christian -
Dear All,
I cannot connect to my Exchange account in Outlook 2013 using "Microsoft Exchange Server or Compatible Service".
First I would like to present my network environment, I have 4 physical servers;
The first one is holding the Domain Controller 1, IP@: 192.168.1.10
The second server is holding the additional Domain Controller which it is DC2, IP@: 192.168.1.11
The third server is holding the Exchange 2013 Mailbox, IP@: 192.168.1.15
And the last server is holding the Exchange 2013 CAS-HT, IP@: 192.168.1.16
I am doing the steps below:
1-Creating a new profile in outlook and start configuring the exchange account by entering the IP address of the Exchange-CAS Server, 192.168.1.16
2-entering the account name: [email protected]
3-Go to "More Settings" > "Connection" > "Connect to Microsoft Exchange using HTTP" > and entering the "Exchange Proxy Settings"
4-type the exchange CAS Server URL, https://192.168.1.16
5-Check the "Connect using SSL Only"
6-Authentication Settings: "NTLM Authentication", and pressing Apply
7-When I press the "Check Name" button, a message occurred> "The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action".
8-I go back to the "Exchange Proxy Settings" and I Uncheck the "Connect using SSL Only" and pressing Apply
9-i press the "Check Name" Button, a small window occurred to enter a Username and Password, so I enter the Administrator username and the administrator password and pressing "OK", but nothing is changed, I tried to enter my
username and password in the small window and I still got the same result.
I cannot verify the account name and I cannot complete the process.
I appreciate you kind assistance.Hi,
To narrow down the cause, I’d like to recommend the following troubleshooting:
1. Try to login the test account through OWA.
2. Check the Autodiscover settings: get-clientaccessserver |fl autodiscoverserviceinternaluri
3. Check the result of directly accessing the following URL:
https://autodiscover.domain.com/autodiscover/autodiscover.xml
Thanks,
Angela
Angela Shi
TechNet Community Support -
Cannot Connect to Google Calendar in Mail, Contacts & Calendars preferences
I recently obtained a new Mac and am playing with Mountain Lion for the first time. I'm trying to add my Google Apps (custom domain, not @gmail.com) account to the Mail, Contacts & Calendars control panel. I was able to add Mail, Messages, and Notes without any issues, but it's refusing to connect to Calendars & Reminders. When I attempting connecting, it gives me an error...
A secure connection couldn't be established.
Click “Continue” to continue creating the account. You can edit the account later in Calendar preferences if necessary.
So I click "Continue" to... well, continue. Eventually, I've given this error:
There was a problem setting up the account.
Calendar couldn't discover the account settings for the CalDAV server “google.com”.
Just out of curiousity, I went into the Calendar app to directly add my Google account. Doing so also gives me an error:
Server with Secure Communication Unavailable
Your calendar account isn't on a server that can receive your calendar securely.
If a server isn't secure, others may be able to view your calendar information. To continue searching for your account on servers that may not be secure, and then set up the account if it's found, click Continue.
So I go ahead and click Continue. After waiting some more, I finally get the error...
No CalDAV servers were found for "google.com".
This message appears on the Account Settings sheet where you can add a CalDAV account. If I manually type in the Server Address here (https://www.google.com/calendar/dav/[email protected]/user//www.google.com/calendar/dav/[email protected]/user), Calendar claims it still cannot connect to a secure connection. This time, clicking Continue does add the account. (I'm assuming through a non-secure conncetion.) If I try to edit the Account Settings, it takes me to the Mail, Contacts, and Calendars control panel where Calendars & Reminders for my Google account is now selected.
I can only assume this is a weird bug with Mountain Lion, but needless to say, this is far from the "it just works" mentality I've been use to.
This was not an issue with iCal on Snow Leopard, which is what I'm coming from.I was having similar issues and thought I would put down what solved my problem.
In "Mail, Contacts & Calendars" I didn't choose "Gmail" I used "Add Oter Account…" as previously mentiond.
Then I chose "Add a CalDav account"
Under User Name: I entered my entire gmail address
Under Password: I entered a new "Application Password" key as generated by Googles two step verification process.
Under Server Address: I tried to use just "google.com" and "www.google.com" neither of these worked - only errors. So I used the address as listed on Google Calender when clicking on settings for my main calendar. There is a link that will give you your calendars private address. I shortened it to:
www.google.com/calendar/ical/your_gmail_address_goes_here
Then it worked immediately! -
Error:Cannot connect to WMI provider. You do not have permission or the server is unreachable
I'm getting the below message when i try and access SQL Config Manager on my Windows Server 2003 R2
"Cannot connect to WMI provider. You do not have permission or the server is unreachable. Note that you can only manage SQL Server 2005 and later servers with SQL Server Configuration Manager.
Generic failure [0x80041001]"
Also tries with the below solution but still the error persists
The solution is to go to a command prompt as administrator and then run mofcomp.
C:\Program Files\Microsoft SQL Server\90\Shared>mofcomp "C:\Program Files\Microsoft SQL Server\90\Shared\sqlmgmproviderxpsp2up.mof"
Below was the output of the command:
Microsoft (R) 32-bit MOF Compiler Version 5.2.3790.1830
Copyright (c) Microsoft Corp. 1997-2001. All rights reserved.
Parsing MOF file: C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmp
roviderxpsp2up.mof
(1): error SYNTAX 0X8004402f: Error creating temporary file
Compiler returned error 0x8004402f
C:\Program Files (x86)\Microsoft SQL Server\100\Shared>
Can anyone tell how this problem can be solved?Sorry for the mistake.The command prompt is
C:\Program Files (x86)\Microsoft SQL Server\100\Shared>mofcomp "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
And error i got is
Microsoft (R) 32-bit MOF Compiler Version 5.2.3790.1830
Copyright (c) Microsoft Corp. 1997-2001. All rights reserved.
Parsing MOF file: C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmp
roviderxpsp2up.mof
(1): error SYNTAX 0X8004402f: Error creating temporary file
Compiler returned error 0x8004402f
C:\Program Files (x86)\Microsoft SQL Server\100\Shared>
I hav checked that sqlmgmproviderxpsp2up.mof is in C:\Program Files (x86)\Microsoft SQL Server\100\Shared\ folder.
Maybe you are looking for
-
Portal API for pages, styles etc
Greetings, I have laboured through documentation and have reached the point where I can manage portlets & portlet instances through the API. What I can not do is programatically create, delete or alter actual "portal pages". I would prefer to not hav
-
Error 7 in Build App Under 6.0.2
I get an Error 7 occurred at Librarian Get Info.vi File not found. I'm running version 6.0.2 and my target directory is a simple "C:\App" Thanks.
-
Function modules to send mails from ABAP
hi can any one give me the function module to send mails from abap to yahoomail or gmail etc. i will be grateful if any one can provide me a sample code. thanks & regards rajesh
-
Multiple versions of QT and iTunes on control click's "Option with"
When I control click on an item, the open with menu populates two choices of QT 7.2.1 and 7.3. The same is true for iTunes and Safari. When I select the older version, a new QT icon appears in the dock. Is this normal behavior? Strangely enough, when
-
HT5312 my account has been frozen and i cant rest it or rest my security questions
i need help to rest mt security questions so i can acess my account again