Cannot connect to hotspot after 10.10.1 update

Hi,
I have an issues since updating to 10.10.1. I use my hotspot several times a day. After upgrading to 10.10.1 I cannot connect my Mac to the hotspot of my iPhone anymore. Anybody the same problems? Any suggestion what to do? All latest versions, I rebooted etc. etc.

I had exactly the same issues, very annoying and still have problems with wifi my self, particulary wifi speed, the transfer rate of my wifi network is at 56mbps which slows down the generic perception of speed in my mac. By the way I have a late 2013 macbook pro retina.
Related to the issue you described, I follow word by word the link I've sent to you and it did solve my instant hotspot issue, I could see my phone but couldn't connect. You must completely reset(delete) your iCloud on the phone and mac, don't worry you will not loose data, had to do it 2 times myself

Similar Messages

Cannot connect with IPad2 After downloading newest OS update 10.7.5

I keep getting this message "John Does iPad" cannot be used because it requires iTunes version 10.6.3 or later. Go to www.itunes.com to download the latest version of iTunes. It started after update OS software to latest version.

Yes, when I look in my applications and view the version there it shows 10.7. However when I open Itunes and view itn the "about itunes" tab, a window scrolls showing that I have 10.5. Ive downloaded the newest version at least three times. Is there someting Im missing or not doing. Once downloaded it says it was done sucessfully.
Tony

I have several iPod touches and there is always one that cannot connect to wifi. after several weeks it usually rights itself. what is going on?

I have several iPod touches and there is always one that cannot connect to wifi. after several weeks it usually rights itself. what is going on?

Matthew...
Try here > iOS: Troubleshooting Wi-Fi networks and connections

ODI Client cannot connect the datebase after the datebase IP changed

ODI Client cannot connect the datebase after the datebase IP changed.
1,the datebase on mac A,the mac changed ip
2,on the client, tnsping db is ok.
3,use pl/sql ,can connect on the db
4,with odi,changed the repostry URL to the new db IP,throw the exception below
java.sql.SQLException: Io Exception: The Network Adapter could not establish the connection
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:274)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
     at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.c(SnpsConnection.java)
     at com.sunopsis.sql.h.run(h.java)
Is anything we need to config after change db machine IP?

yeah,I got it.Everything is ok now.
After change IP,we must open TopologyManager:change the JDBC connection of workrepository which must chose in Designer.
when we open the Designer ,it will connect to db.then coonect to workrepository with original IP.So,we must rechange workrepository's JDBC first!

Cannot connect to iTunes after iOS6 install

Cannot connect to iTunes after iOS6 install. Tried to reset date forward as others have suggested, has not worked. Any other idea's solutions out there?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Help! I cannot connect Itunes store after my ipad 1 use ios5! Does anyone have a similar problem?

help! I cannot connect Itunes store after my ipad 1 use ios5! Does anyone have a similar problem?

Same :(
Do you have any problem with apps? I can download or update apps without problem. Also no problem with podcasts, but no music, no video or movie: cannot connect to iTunes Store :(

TS1368 cannot connect itune store after update ios 6

cannot connect itune store after update ios 6

Hello Dannard Lee,
It sounds like you aren't able to connect to the iTunes Store, or update your device to iOS 8. I would use the troubleshooting from the following article to help troubleshoot the issue, and it seems to be they may be related to one another:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
Thank you for using Apple Support Communities.
Regards,
Sterling

TS1368 Cannot connect to iTunes store when trying to update or download an app, I tried changing the time and updates nothing iseems to be working

Cannot connect to iTunes store when trying to update or download apps, I have tried updates and adjusting the date

The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

I get a message that says cannot connect to iTunes when I try to update apps. I am connected to wifi. I have changed password. I have turned off iPad and back on. I have tried scearching for the answer and cannot find any help.

I get a message that says cannot connect to iTunes when I try to update apps. I have tried everything. What to do?

Apple appears to be having trouble with the iTunes Store servers right now. Wait for them to fix it.
(81086)

Cannot Adjust Screen Brightness after Windows 8.1 Update

Cannot Adjust Screen Brightness after Windows 8.1 Update....i am using sony vaio laptop....i recently updated windows 8 to 8.1

Hi:
Most likely you need to install the graphics driver for W8.1 from your PC's support and driver page.

TS3297 Cannot connect to iTunes Store ,my iPhone is updated and connect to internet

Cannot connect to iTunes Store ,my iPhone is updated and connect to internet

I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work. i can't find an automatic update of time zones on my itouch to turn this off.

Exchange active sync cannot connect to server after migration mailbox user from exchange 2007 to exchange 2013 coexistence

Hello, everyone, my name is rafl
I have a problem with exchange 2013 active sync.
I have installed exchange 2013 coexistence with legacy exchange 2007, I have to migrate user mailboxes: [email protected] from exchange 2007 to exchange 2013.
but any problem with active sync connection on the mobile device after moving mailbox user. I reconfigure the exchange ActiveSync external connection domain (latest.domain.com) on mobile device replacing legacy exchange ActiveSync external connection domain
(legacy.domain.com)
the process of moving mailboxes successfully without error.
Access OWA for exchange 2007 and exchange 2013 is running normally
access mail from Outlook running normally
Certificate request has been installed and has no problem with it
The OWA virtual directory is configured for internal and external connections and different from the legacy exchange
The autodiscover virtual directory is configured for internal and external connections and different from the legacy exchange
ActiveSync virtual directory is configured for internal and external connections and different from the legacy exchange
user mailboxes are still on exchange 2007 is not problematic.
only problem with Exchange Active Sync on mobile devices, where I set up an email with android, iphone, windows phone. the error message: cannot connect to the server.
but, if I create a new user and create user mailboxes directly in exchange server 2013, ActiveSync can run without error on mobile device, access through OWA, MsOutlook, Outlook Anywhere also run normally.
only the results of user migration from exchange 2007 to exchange 2013 which is troubled with exchange ActiveSync connection.
any ideas for this problem, and what should I check on the exchange server ..?

i have run the activesync test connectivity and get some error :
Testing TCP port 443 on host domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 3091 ms.
Testing TCP port 443 on host autodiscover.domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 21072 ms.
Testing TCP port 80 on host autodiscover.domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 21049 ms.
I have allowed access to port 443 (https) and 80 (http) on the firewall and re-run testconnectivity, but still with the same results. if I enable active sync for users who created directly in Exch 2013 there is no problem with the ActiveSync, just a problem
for users who moved from Exch 2007 to Exch 2013. @Android, iPhone, and Blackberry the error message "cannot connect to the server"

I cannot connect to ITunes after updating to IOS 7.0.2,cannot update my apps nor download new apps. When I tap the quick test for IOS diagnostics it says it cannot verify the ticket number.

After updating to IOS 7.0.2 in my Ipad mini I cannot update my apps nor download new apps . It says "cannot connect to ITunes. " it's been almost 3 wks now. I have tried resetting it and trying other options like changing the DNS to just 8.8.8 etc but to no avail. I try to run the IOS diagnostics but it couldn't verify my ticket number. Everytime I open my mail it cannot identify server identity " Apple.imap.yahoo.com." But I just clicked "continue" anyway so I could get my mail.

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

MY iphone 4s cannot connect to wifi after updating to ios 8.1.1

after updating to ios 8.1.1, my iphone 4s cannot connect to wifi at all.
at first, connection will show up, but when i tried to connect, i will see the wifi logo but after 15 or 30 seconds, connection will be lost again.
i will try again, but this time, my phone will hang, i need to restart but then, wifi will not work at all.
it will show that its searching for network but its not. then it will hang again,
after this, give up already.
my phone is working perfectly fine until updating my ios to 8.1.1.
the problem is i cannot upgrade again as i cannot connect to wifi.

Settings/General/Reset - Reset Network Settings. If you can't turn WiFi on see: http://support.apple.com/kb/TS1559

Cannot connect to database after installing 10g

Hello friends at www.oracle.com ,
after installing Oracle 10g, I am trying to use programs like SQL*Plus or Forms Builder. However, these programs are asking me for the host string, and:
- I cannot simply ignore this question, because I cannot connect without this information.
- But I don't know how I can configure a host string for local access.
- And I don't know if there's already a default host string for me to use after installing Oracle 10g, because I have no practice in database configuration, since I'm a developer.
Please help me.
Best regards,
Franklin Goncalves Jr.

Hi ,
Few pointers which may help you , but a small caveat all instructions pertaining to way we do internally in oracle , so there could be some mismatch at customer end , but more or less logic should be same , in case you can't any step revert back :
1. When Db asks you for connect string essentially it asks for the complete description of the db to connect including :
Db server machine name / ip - that can be resolved from your system if it's a remote server .
Username , Password ,
Db Instance Name - TnsAlias mentioned in TnsNames.ora .
Now there are few Env. variables that you need to set before running / starting an oracle db instance .
1. Oracle_Home - Essentially Oralce Installation directory .
2. Oracle_sid - unique identifier for Oracle Instance .
3. For OracleDb only set T_Work and TNS_ADMIN env. variables as %Oracle_Home%\work directory and place your Listener.ora file in that folder .
4. Make your initial parameter file init<Oracle_Sid>.ora in %Oracle_Home%\database -- default location .
5. Create Oracle Instance specific services to run on a Windows machine , essentially they will be two and default nomenclature is :
Oracle Service - OracleService<Oracle_Sid>
Listener Service - Oracle<oracle_sid>TnsListener
Now in %Oracle_Home%\bin directory you have couple have tools to help you in whole process including lsnrctl.exe , tnsping.exe , sqlplus.exe .
and onec you start oracle instance like this :
SQlPlus "/as sysdba" -- OS Authentication
--- Connected to Idle instance
Sql> startup --> this will take default parameter file
Check out dump location for log and trace files generated if enabled .
Now client setting :
1. This is the place where you need appropriate connect string with all components as mentioned above .
Check out any good site for exact syntax , but you need to make sure regarding client you are using for e.g:
ODP.Net , Java Driver etc .
For Client few important settings :
Execution directory should contain tnsnames.ora
Create T_WORK and TNS_ADMIN for execution directory .
check out for listener connectivity using :
tnsping <TnsAlias>
Imp -- Include all relevant stuff in System PATH for execution from anywhere .
Once it connects tehn you can use appropriate username / password for connecting with appropriate connection string .
Normally while installing oracle you would have set the username and password to be changed later .
or otherwise onec you log in as sysdba, you can create new username/password and give it sysdba permissions .
Also imp. thing for connecting from a remote system is having Sqlnet.ora authentication file in client's T_WORK and TNS_ADMIN .
I hope it helps upto some extent .
regards ,
Mrinal

Cannot connect to hotspot after 10.10.1 update

Similar Messages

Maybe you are looking for