Cannot connect to imaging server after ZDML SP1 IR3 install
OK, here's a bit of an odd problem... well, actually, I hope it's an insanely easy problem that I just have overlooked a simple solution for. I guess that's for you guys to help figure out. ;)
We had been running Zenworks 7.0.1.0 on an OES1 Linux server with a few odd problems, mostly with remote management and inventory, but we never had a problem with connecting to it for imaging purposes (at least not since I took over management of the box not that long ago). Considering the remote management and inventory issues, I decided to update it to the latest version just to make sure it wasn't an issue that had already been fixed, but now that I have done that we can no longer connect to the imaging server for imaging. While I'd still like to get our original problems fixed, I'm more concerned about the imaging itself and can then revisit the first.
How I went about the upgrade: I followed the instructions at section 4.3 at ZENworks 7 Desktop Management with Support Pack 1 Interim Release 3a. Running ZDMstart shows "done" for bringing everything up, but when I try "/etc/init.d/novell-zmgserv status" it tells me that the Daemon is stopped; when I try "/etc/init.d/novell-zmgserv start" it says "failed".
When that failed, I downloaded the ZEN7_with_SP1_IR2_DesktopMgmtLinux.iso and ran that installation, then went through the steps on 4.2 to upgrade. (OK, this particular maneuver may not have been my smartest.) Same end results though.
I do recognize that I'm walking into a situation I didn't set up and there were other problems to start with. I have a feeling by the end of the year we'll be migrating to an OES2 server but, to be blunt, that project has been put off for other reasons here and again and I'd like to have something to work with in the meantime. Any idea where exactly the failed attempts would be logged to give me more to work with (I don't see anything in /var/log/messages)? Any other thoughts/suggestions are more than welcome; thanks in advance!
topher
Apologies in advance for any confusion; normally I post under this account, but the other day was logged in as tchristi2 for other reasons and forgot to log out... :/ In any case....
I tried uninstalling and re-installing ZENworks from the 7.1HP2 CD, and tailing the /var/log/messages file this line jumped out at me:
Sep 2 09:07:19 oes1 logger: We were unable to locate ndsmodules.conf at /usr/lib or at /usr/lib/nds-modules. ZENworks Imaging was not installed correctly.
I cannot find ndsmodules.conf in either of those locations; could someone help me figure out where it would be or why I might not have it? I may just punt and setup an OES2 box and move ZENworks to it, but at the same time I'd like to have imaging running until we do get that box up and going. Thanks in advance!
topher
Similar Messages
-
I have upgraded to safari 5.1 through auto update
After restart the safari does not connect to any server saying it cannot find them
other browsers such as Minefield work fine and the internet connection works fine
The computer is connected via airport to a router, firewall is active.
Safary 5.06 worked without any glitch
any ideas?I have the same problem but im on Lion, All my web browsers seem to work perfect but not Safari. : (
-
Cannot connect to sql server after re installing IIS 6?
I re installed IIS 6, after the restart i couldn't connect to sql server engine nor seeing it when using browse for me, i was trying to install team foundation server, at first it could see that i have an sql server running after re installing IIS it can't
see it also. I'm using windows server 2003 SP2. Also i cannot remotely access it after the re installationJust type the IP or name of the server (localhost) and try to connect.. SSRS 2005 requires IIS but how does it relate to SQL Server connection?
What error are you getting? Make sure that SQL Server is running up.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
2012 r2 rds deployment cannot connect to sql server after reboot
We have a ha connection broker setup with 2 connection brokers and everything was working fine up untill the servers were rebooted for updates. Now users cannot connect to thier collections and I have an error in the event log that the deployment could not
connect to the sql database.
at this point I am assume that the issue is related to security. I am able to query the database as admin from the effected servers and other services that use other databases in the same sql instance are no5 having issues.
I have checked the security group that both cb servers should be in and they are in the group and the group has sysadmin and dbo within sql
any ideas?
Please remember to mark my replies as answers if they helpHi,
Thank you for posting in Windows Server Forum.
Can you please create the database manually with below command and verify.
PS C:\> Set-RDConnectionBrokerHighAvailability –DatabaseConnectionString
"DRIVER=SQL Server Native Client 11.0;SERVER=<SQL Server
Name>;Trusted_Connection=Yes;APP=Remote Desktop Services Connection Broker;
DATABASE=<DB Name>" -DatabaseFilePath "C:\DbFiles\<DbName>.mdf"
-ClientAccessName "<DNS RR Name>"
Grant DBO permissions to the service account on the RDS server and try to run your wizard again.
More information.
RD Connection Broker High Availability in Windows Server 2012
http://blogs.msdn.com/b/rds/archive/2012/06/27/rd-connection-broker-high-availability-in-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
Cannot connect to Itunes server after installing Itunes 7.5
Help! After installing Itunes 7.5 I cannot connect to the Itunes store. I have a active internet connection but the error I get says the Network connection was refused. Anyone have any suggestions???
I finally uninstalled 7.5 and reinstalled 7.4.3.1. After the first attempt to connect to the iTunes store I got the same error. I tried a 2nd time to connect to the store and this time it connected.
7.5 is useless. -
Cannot connect to iCloud server after 10.9.4 update.
Attaching EtreCheck information. Connection doctor states: Could not connect to iCloud iMap server. Restart of mail did not work. Reboot of computer did not work.
Thank you for any help you can provide.
EtreCheck version: 1.9.12 (48)
Report generated July 19, 2014 at 10:06:48 AM MST
Hardware Information:
iMac (27-inch, Late 2013) (Verified)
iMac - model: iMac14,2
1 3.5 GHz Intel Core i7 CPU: 4 cores
32 GB RAM
Video Information:
NVIDIA GeForce GTX 780M - VRAM: 4096 MB
iMac 2560 x 1440
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:41
Disk Information:
APPLE SSD SD0128F disk0 : (121.33 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 120.99 GB
Boot OS X (disk0s3) <not mounted>: 134.2 MB
APPLE HDD ST3000DM001 disk1 : (3 TB)
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 3 TB
Recovery HD (disk1s3) <not mounted>: 650 MB
USB Information:
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
HP Photosmart 6520 series
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.philips.iokit.DLconnect (85 - SDK 10.4) Support
[not loaded] com.roxio.TDIXController (2.0) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.parallels.mobile.dispatcher.launchdaemon.plist Support
[loaded] com.parallels.mobile.kextloader.launchdaemon.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.fujitsu.pfu.ScanSnap.AOUMonitor.plist Support
[running] com.newwellnesssolutions.DLconnectMonitor.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[loaded] com.parallels.mobile.prl_deskctl_agent.launchagent.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.parallels.mobile.startgui.launchagent.plist Support
[running] jp.co.pfu.ScanSnap.SearchablePDFConverter.plist Support
User Login Items:
iTunesHelper
Dropbox
ScanSnap Manager
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.10 Support
AdobePDFViewer: Version: 10.1.10 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 60 Check version
Safari Extensions:
Save to Pocket: Version: 1.9.1
Open in Internet Explorer: Version: 1.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Java Support
Time Machine:
Auto backup: YES
Volumes being backed up:
Destinations:
Data [Network] (Last used)
Total size: 3
Total number of backups: 55
Oldest backup: 2014-01-26 04:43:07 +0000
Last backup: 2014-07-19 15:22:17 +0000
Size of backup disk: Excellent
Backup size 3 > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
1% WindowServer
1% fontd
1% SearchablePDFConverterOCR
0% dpd
Top Processes by Memory:
295 MB Mail
164 MB mds_stores
164 MB CalendarAgent
131 MB com.apple.IconServicesAgent
131 MB ScanSnap Manager
Virtual Memory Information:
27.47 GB Free RAM
2.37 GB Active RAM
433 MB Inactive RAM
1.74 GB Wired RAM
419 MB Page-ins
0 B Page-outsRestart the router and the broadband device, if they're separate. If there's no change, see below.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Error message cannot connect to IMAP server after 31.4.0 upgrade installed
After automatic security upgrade 31.4.0, I get an error message "IMAP server has disconnected. The server may have gone down or there may be a network problem."
No problems until the upgrade.
It is a Mac Mini running 10.7.5
My Mac laptop without the upgrade works fine.Restart the router and the broadband device, if they're separate. If there's no change, see below.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Cannot connect to X server after resume from suspend
Hello,
i'm a happy user of arch and i3, one and only thing that is not working correctly is that sometimes after resume from sleep (closing the lid, and then opening) I am not able to start any programs. this happens about 50% of the time. when it happens i have to exit i3 and login again, and everything works ok then.
I'd be grateful for any suggestion how can I debug and solve this problem.
y
Last edited by yemu (2014-04-09 08:53:12)the error was, after running xterm:
No protocol specified
xterm: Xt error: Can't open display: :0.0
after running scrot
No protocol specified
giblib error: Can't open X display. It *is* running, yeah?
after running firefox
(process:2559): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
No protocol specified
No protocol specified
Error: cannot open display: :0.0
but I think I was able to fix the problem.
when I was browsing the internet for solution, I stumbled upon an info about similar problem caused by the hostname set to localhost. I checked my system, and apparently I haven't set my host name during install, and it was still localhost, so I changed it. and after that I tried suspending several times, and the problem never occured. I'll test in upcoming days, and if it works I will change the thread title to [SOLVED].
Last edited by yemu (2014-04-10 07:40:47) -
Hello,
I have a sharepoint 2010 sp1 CU Dec 2011 server with a SQL Server 2012 SP1 CU4 reporting services instance. I am able to open Power View and use it normally when bypassing the ISA Reverse Proxy server. However when going thru ISA I receive the
following Error.
Power View Cannot connect to the server due to a security issue. The server may not have been able to match the host for Silverlight. This error appears after I click yes on an Internet Explorer Display Mixed Mode prompt.
I've seen a couple references to this issue but not much. This one mentions a clientaccesspolicy.xml file but I haven't had any luck with that. http://connect.microsoft.com/SQLServer/feedback/details/716433/cannot-connect-to-the-server-due-to-a-security-issue-the-server-may-not-have-been-able-to-match-the-host-for-silverlight
Any Ideas? Thanks.
RyanHi Ryan,
Based on my research, the issue should occur due to a by design behavior in Threat Management Gateway (TMG). To work around this issue, you can use SSL between the TMG and the SharePoint Web Server.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support -
ADE cannot connect to fullfillment server
ADE worked well under Windows XP. After installing Windows 7 on my PC and installing ADE my PC kept authorized. Then I tried to lend a book from my library. A URL-link was downloaded. But ADE could not connect with the fullfillment server via that URL-link, though the PC was connected to the internet.
Success! Your solution worked for us. Thank you!
Date: Fri, 30 Aug 2013 01:34:25 -0700
From: [email protected]
To: [email protected]
Subject: ADE cannot connect to fullfillment server
Re: ADE cannot connect to fullfillment server
created by Zschau13 in Adobe Digital Editions - View the full discussion
As I have learned in a German forum,
in my case the firewall was the malefactor:
The ADE program is to be allowed to communicate through the firewall:
->Start
->System Control
->Security Center
-> Windows Firewall
->Allow Program to communicate through Firewall
If “ADE” is not in the List of Programmes that are permitted,
then add it to that List by using the button “Change settings”.
May be the English names of buttons and menus are somewhat different- I
tried to translate the german names.
Don’t forget to re-start your computer.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5639730#5639730
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5639730#5639730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5639730#5639730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Digital Editions by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
Below is a summary of the issue:
After selecting datasheet view beow error occurs:
"Cannot connect to the server at this time. You can continue working with this list, but some data may not be available."
"Unable to retrieve all data."
The item counts displays say 100 out of 14000 items.
Exporting List to excel is giving only 2000 records out of 14000 records.
Other Observations -
This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
I have checked the Alternate access mapping setting ,its fine.
It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
I checked below links also ,but doesn't seem to work in my case.
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
I am sharing my finding.
1. First install the
KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
These two steps resolved the issue in our environment. Hope it might help others as well.
Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile -
BPC Excel: The system cannot connect to the server. There might be network
Hi Guys,
I get the following error when i try to connect to BPC Excel: The system cannot connect to the server. There might be network or security issue.
This only happen on clients machines, I have installed the client tools on the server and tested, i can connect to Excel but not on the machine. My MS office version is the same as the one on the server. BPC is ver 5.04
Has anyone experienced the same problem.
your help will be greatly appreciated.Let me summarize your issue to see if I may help. If I cannot, then you will need to work with SAP Support on the connection problem.
- You have a single or multi-server setup?
- Installed using BPC 5.1 SP3, (or 5.0.502) correct?
- You can enter the BPC on the server, both via BPC Excel and BPC Admin?
- When you initiate BPC Admin on your client, so can connect to the Server and perform Admin operations?
- When you initiate BPC for Excel, and walk through the connection wizard, you cannot connect to the server?
- When you are in the Connection Wizard, are you using a path or a Server designation?
- Is the system on a single domain?
- When you added users to the Admin Security profile, they were selected from a DOMAIN?
- You have processed security and assigned ALL TASKS currently and processed the MEMBER ACCESS profiles, yes?
After all of this, have you uninstalled 1 BPC client, cleared the ProgramFiles/BPC folder, and deleted the local stored BPC information? If you haven't, just for simplification, I would attempt this process.
You also hae read all the SAP Support Notes regarding using Excel2007 with BPC and the issues you may experience?
Please let me know and maybe we can help. -
InitCatalog:Cannot connect to the server
Hello,
We have installed BPC 7.0 in 2-server architecture.
First server is VM - Windows 2003 32 bit, it contains
- BPC
- Reporting Services
- Integration Services
Second server is physical. Windows 2003 64 bit, it contains
- SQL Server 2005
- OLAP Server 2005
We have installed also a separate client: admin and office tools.
During opening Excel 2007 (provider Microsoft.ACE.OLEDB.12.0 is installed on first server) we got error:
InitCatalog:Cannot connect to the server 'XXXXX'. The server is either not started or too busy.
After clicking the OK button in the error message, I was further notified that Account dimension member cannot be downloaded and so on.
It looks like similar problem as in this thread: InitCatalog:Cannot connect to the server 'XXXXX'.
But it wasn;t solved.
We got also the same error during processing cubes/dimensions from BPC Administrator.
Can anybody help us solving this problem?
Thanks in advance.Did you install ADOMD.NET and also the QFE into application server?
ADOMD.Net-KB893091-v8.00.0991-x86.EXE
you can download this from follow link:
http://www.microsoft.com/downloads/details.aspx?familyid=790d631b-bff9-4f4a-b648-e9209e6ac8ad&displaylang=en
You have to reboot the server after the installation of this QFE.
Regards
Sorin Radulescu -
Cannot connect to abap server, please check your abap server connection
Installed new NW BPC 7.5 system on windows 2008 server but get the error as follows
when logon to BPC server:
"Cannot connect to abap server, please check your abap server connection".
"define system user group tab" is inactive in server manager also.
Server Diagnostic errors for SAP Server Connection:
Database Connection
Status Connection Error
as per note 1385864 but this note has not helped get past this status with installation.
User Type value is either set to Communication Data for all three users (BPC_ADMIN, BPC_SYSADMIN, BPC_USER).
and these accounts are not locked.
Any ideas for these errors?
Regards,
AidanHi Aidan,
"Your logon id (domain\user) does not have SystemAdmin rights; some functionality
is disabled."
This is caused by the fact that the user you are logged in as isn't in the UJA_SVR_DEFAULT table, the SYSADMIN field needs to have a value that contains your user id (i.e. DOMAIN\USER) . You can set this up with the UJA3_WRITE_SYS_USERS program.
"When I try to install APPshell the following errors occur:
@8O@ UJA_DATA_CHECK E 006 Application PLANNING's multiprovider /CPMB/ATMKOOE not exist in BW
@8O@ UJS_EXCEPTION E 003 Errors occured during "after import" method call during activation"
Aidan, sounds like something went terribly wrong during your activation process. Do this, Clean the appset with the UJS_ACTIVATE_CONTENT program and make sure that everything is completely deleted. Make sure that there is a lot of memory available for the activation and try it again.
It should work.
Hopefully this helps you.
Cheers, Scott -
Load balancing error 88: Cannot connect to message server (rc=9)
Hi,
We are facing a problem in the system object.
initially we created a system object with loadbalancing template ,and everything worked fine, but after couple of months we found a error "Load balancing error 88: Cannot connect to message server (rc=9)", so we have created a Dedicated application server object which resolved our issue.
My question is why has this problem occured, and since my client side has lot number of users and we wish to keep the system back to load balancing object.
How can i make my system object work back, what might be the causes?
Thanks
Srivastsa KondapallyLoad balancing only works if the message server is available and the logon group specified exists as well. If one of those changes, then it will break until you get the values set correctly.
Maybe you are looking for
-
So before we start - I have read the KB (https://support.mozilla.org/en-US/kb/firefox-already-running-not-responding) and actioned the advice on how end the processes, delete the parental lock, etc. This gives a temporary but one time only fix and do
-
I have just bought quicktime pro for windows as I need to mail the above. No-one at Apple can tell me how to do it!! Help
-
Printing markups in "Document" selection
How can I save a PDF with Markups so that the markups will always print, even when selecting "Document" in the print dialog?
-
Is it possible to link my paypal acount to my apple acount to do purchases?? If yes can u post the link please ? Cuz when i created my itunes acount i wa young but it has been a long time now and i also have a paypal acount and already created both a
-
RACCT not found / Message no. K9806
Budget Planning in T-Code FMPLCPD. I've copied standard layout SAPFMPL02 to applied with my FM Masters (no Grant & no Funded Program). When I use the layout with Entry_Free option the layout can be overview to be able to input the planning amount. Wh