Cannot connect to internet through AirPort in Costa Rica - HELP!

Hello,
I have been traveling Costa Rica for the past few days, and have had no problem connecting to WIFI across the country, but, tonight, I am not able to connect. I clicked on my AirPort icon > Open Network Preferences. The Status reads "On", BUT under the status is a message that says:
"AirPort has the self-assigned IP address 169... and will not be able to connect to the internet."
Reading through the posts here, I have tried several fixes...
- Renew DHCP Lease
- Repair permissions
...And still no luck.
I have no access to the router itself, because I am staying at a bed and breakfast. Anyone have any other ideas?
I really appreciate your help in advance. I love this community!
Sincerely,
Nathan

Hey,
This is obviously seems to be a DHCP problem, do you have any other wireless devices with you like an iPhone, iPad or just any wireless capable device ? If yes, try to connect through it and see if it will obtain a valid IP address successfully, if it didn't, then surely it's a router issue that it isn't able to distribute IP addresses, if you don't have a second device, can you see any ethernet connections in the wall ? another solution is to contact the IT person at your location and ask him if you should configure your network settings manually and if so, what would be the settings. Sometimes something as simple as restarting the router fixes similar issues

Similar Messages

  • Lost connection to internet through airport

    My Mac at home is configured to a timecapsule and connected through airport wifi. The Time capsule is connected via cable to modem and out via cable to Internet. Up until today everything is fine. started up and i have lost connection to the internet.
    Network Preferences is showing that Airport has a self asssigned IP address and cannot connect to internet. The time capsule lights are showing green, as do the Modem, neither are reporting problems.
    I have tried all of the "first Aid configurations" i.e. switch off/on etc, also tried a couple of ideas from forums, nothing works. I can connect the Mac directly to the modem via cable and access the internet.
    As an aside, My iphone has also lost connectivity through home wifi.
    It would appear from other forums that this is a growing problem, however not much in the way of resolution. Any Ideas????

    System Preferences/Internet & Network/Network
    Unlock the padlock
    Locations: Automatic
    Highlight Airport
    Click the Assist Me button
    In the pop up window click the Diagnostic button.
    System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
    Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
    Mac OS: How to release and renew a DHCP lease
    *No internet connection (wireless)*
    Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
    Delete all extra entries that you find.
    Place a check mark next to "Remember networks this computer has joined."

  • Can't connect to internet through Airport Express anymore

    Suddenly, my PowerBook can't connect to the internet through Airport Express. Monday late afternoon--everything was fine. Put it in sleep, come back a few hours later, can't connect.
    Thing is, Airport/wireless is working. Can stream audio to my home stereo.
    And the DSL/modem are working. If I connect the machine via ethernet directly, I'm online.
    Saw that some other users began having problems with USB/printer connections Monday. Could my problem be related?
    What gives?
    Any ideas?

    Hello mnkyby. Welcome to the Apple Discussions!
    It sounds like your AirPort Express Base Station (AX) in not getting a proper IP address from your modem.
    Try this ...
    o Connect to the AX's wireless network, and then, run the AirPort Admin Utility.
    o Go to the Internet tab.
    o Note the value for IP address. (Note: Do not list it here on the forum, just note what it is.)
    o Is the IP address what you would expect from your ISP or is it something like: 196.254.x.x?
    If the latter, try the following ...
    Modem/Router Power Recycling - Quick
    o Power-off the DSL/Cable modem, AX, & computer(s); Wait at least 5 minutes.
    o Power-on the DSL/Cable modem; Wait at least 5 minutes.
    o Power-on the AX; Wait at least 5 minutes.
    o Power-on the computer(s)
    If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
    Modem/Router Power ReCycling - Full
    o Power-off the DSL/Cable modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    o Power-on the DSL/Cable modem; Wait at least 15 minutes.
    o Power-on the AX; Wait at least 5 minutes.
    o Power-on the computer(s)

  • Problems connecting to internet through airport extreme

    Hi everyone I am tyring to connect to the internet. I have Charter Digital at the highest speed. When I connect directly through the cable modem using DHCP i can connect to the internet just fine, but when I use the Airport using assing multiple IP addresses i cannot get the internet. When I run diagonostics, Everything works fine up to ISP after that (internet, Server) cannot connect. I've read through the boards and found nothing, so I could really use some help. I have the CAT 5 cable from the modem going to the WAN plug in the Airport.
    Thanks for any help you can give

    Thank you - some of the materials linked to that may have helped isolate my problem. Unfortunately, nothing's solved it yet. Pinging the Apple IP address gives me: No route to Host, with 100% packet loss on all attempts. I'm using an Airport Express card in a 1GHz G4 eMac running OSX 10.3.9, trying to connect to a Linksys BEFCMUH4 wireless broadband gateway modem/router. As stated above, all 4 ethernet ports are functioning correctly. All initial diagnostics on my end show there's a connection. Further diagnostics and attempts to get online show a lack of a connection but don't give any detail as to where it's encountering difficulty (or, if a traceroute shows something I'm not qualified to decipher it). It's even told me it's unable to configure succesfully. I've made sure the router itself is configured so there is no password necessary (it checks for an automatically logged number from my computer) and it shouldn't be locking me out from there (I hope). I was told running Airport Express with a non-Airport wireless router would be fine, but is it possible I was misinformed? The setup procedures available to help facilitate this all assume there's an Apple AirPort to search for and don't turn up my current router when they scan, leaving me with nothing to select from in that stage of the setup, and thus I cannot proceed. Am I doomed? Are there any gracious, exceedingly capable souls out there with the time and expertise to assist me? I'll be very grateful if someone can get me past this hurdle (I need to go wireless so I can get my air conditioner installed).

  • Windows cannot connect to internet with airport

    I have a macbook with Windows via Bootcamp. I have DSL. My mac OS can access internet fine (wirelessly and ethernet). I can access internet through Windows if I connect directly through the modem (ethernet). If I connect ethernet through airport, I cannot connect. Of course I cannot connect wirelessly either. I would like to connect wirelessly. Any ideas?
    Thanks,
    Rich

    Richard,
    Some items to consider.
    First, can Windows see the wireless router? You can go under network settings in Windows and see if it "sees" the wireless access point. Or, you can log into the router and see if it sees Windows as a connected device.
    Do you have any security enabled on your router? If so, have you set up the security on Windows?
    Are you using DHCP on your router? If so, does Windows have a valid IP address?
    Also, have you made sure that the device driver for the Airport Card under Windows is current and working properly?
    Jeff

  • Network Failure! Help please. I cannot access the internet through AirPort

    anymore. never have had a problem in the past, at least not one that couldn't be solved by a reset. I've traced the problem back to the AirPort Extreme, as I can connect via Ethernet cable from the wall. Once it gets to the AirPort Extreme, I cannot connect from any computer in my house. I can't connect from the direct ethernet connection to the Airport Extreme either.
    Yet I can see and access other computers in my house. So that would suggest that it's just some sort of problem with the AirPort Extreme sending out the signal???? I don't know. I looked at the Network settings and nothing seems to be changed there. Could someone please point me in the right direction? Thanks!

    I have Cox cable internet, with a Webstar Modem distributing the ethernet hard connections through a Dynex 8 port ethernet switch. the problem starts to occur at the Airport Extreme. I cannot get wireless internet, or by doing a hard connection to my Airport Extreme. I plug right into the ethernet jack and I get connect just fine. BUT I can connect to every computer on my network, so the wireless network is working properly, it is just not allowing a connection to the internet. any advice?

  • Not connected to internet through airport xtreme (connection is ok) after upgrading iOS6

    after upgrading to iOS6 none of my mobile devices (running iOS6) can go online on internet through my airport extreme. My MAC is using the same without problem.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Cannot connect to internet as Airport "has a self assigned IP address"?

    I suddenly cannot connet to wireless internet as the Airport has a "self assigned IP address" whatever that is. I have tried removing other wireless connectons but it makes no difference. I'm trying to use the wireless connection at the hotel I'm stying in..its working fine on this computer. Any suggestions ...PLEASE?
    Thanks

    Hmmm... well, not what I was hoping to find b/c that is not really a helpful answer, l.b, but thanks for joining in on the discussion. I too just experienced the same problem. Yesterday I was connected just fine, a little slow, but connecting just the same. I was able to do my banking, browsing & what have ya. Today I get up and have no internet connection and my computer says it Airport has self-assigned an ip address and I cannot connect to the Internet. I haven't done anything different and as I can tell, they haven't done anything different either. My iMAC will not connect, but this piece of poop del mini will as will my iphone4 and all three of my kids' ipod touches. Soooo.... anyone else have a solution b/c I am totally at a loss here. I really need my iMac to connect. Got things to do that I can't do on here.

  • Mac connected but PC can't connect to internet through Airport Extreme

    When I was using a dial-up connection everything worked fine on both computers but since I changed to a PPPoE / Ethernet connection my PC using Windows XP can't connect to the internet although is connected to the Airport with excellent signal.
    In System Preferences>Network I have Connect using PPPoE option checked so I can't see my airport in the Airport Admin Utility. Apple Talk is Inactive.
    In System Preferences>Sharing>Internet: Internet sharing is Off and there's a text that it can't be turned on "because there are no ports available over which to share your connection"

    I understand, but for some reason, that I'm trying to
    figure out, when I uncheck the PPPoE option on my
    computer and my base station appears in the Admin
    utility, I loose my internet connection on the
    macintosh although the Network Status says that I'm
    connected to the internet via Airport...
    You will need to configure the Airport to connect via PPPoE.
    iFelix

  • Can't connect to internet through airport extreme but have full signal

    I've seen a lot of posts but I still can't connect wirelessly via airport extreme.
    Using a Powerbook running 10.6.4, I have updated the airport extreme's firmware and have a full signal strength, but I can't connect to the internet.
    I get an error message that it can't find the server.
    I can get online if I connect the internet cable directly to my computer.
    so..
    Airport is working
    Internet is working
    Wireless is not working
    suggestions?

    Robin Berman wrote:
    I still can't connect wirelessly via airport extreme.
    Using a Powerbook running 10.6.4
    That's not possible. Do you mean "MacBook"?
    I ... have a full signal strength, but I can't connect to the internet.
    First try resetting your connection settings using the steps listed in this message:
    http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
    They're not guaranteed to solve the problem, but they'll only take a minute or so to try.
    If that doesn't help, connect to your wireless network, then open the Network panel of System Preferences. Select the AirPort connection item, click on the "Advanced" button, then on the "TCP/IP" tab. What do you see for the three values below "Configure IPv4"? Now click on the "DNS" tab. What do you see for "DNS Servers"?
    Finally, type this URL in the address bar of your browser:
    http://74.125.157.99/
    and press "return". Does that take you to Google? If so, there's something wrong with the way your computer or router is handling DNS lookups.

  • Can't connect to internet through Airport network

    Previously - worked
    Internet: DSL
    Network: via Airport Extreme
    Computers: 3 (G4 Tower, PowerBook G4, Xbox360)
    Setup: I ran the ethernet cable out of the modem into the Aiport Extreme. Then I ran another ethernet cable into a router which then split the signal into two lines -- one going to the tower and one going to the Xbox. The laptop connected wirelessly. This worked using DHCP assigning multiple IP addresses to all on the network and indeed the two computers surfed the net with ease and I had no problems connecting or staying on Xbox Live.
    Currently - doesn't work
    Internet: Cable (Charter)
    Network: same
    Computers: same
    Problem: I recently switched from DSL to Cable internet for faster speed. Here is what i found: When i connect the ethernet cable directly into the tower from the modem i can access the internet. If i connect the ethernet cable directly into the PowerBook G4 i get nothing. If i try to connect the ethernet cable to the Airport from the modem i get nothing as well. At first all i thought i had to do was change the account settings from that of the DSL to that of the Cable internet -- only there are no account settings for the Cable internet. I literally just plugged in the cable and was ready to go. I have tried resetting my airport to get rid of my previous [DSL] settings and redoing the Airport Setup Assistant to no avail.
    G4 Tower, PowerBook G4   Mac OS X (10.3.9)  

    ok so i unplugged my modem for a few minutes and then plugged the ethernet into the airport and turned the modem back on. now i can get internet on both my laptop and my tower. that works, thanks!
    an odd aside tho is that before, when i was connecting through PPPoE, the laptop would automatically connect to my network (regardless of how many networks the airport card was picking up). now that i have the airport set to just connect via ethernet i have to manually log onto my network every time. is there a setting i'm forgetting about that enables automatic log in or is this just the case with connecting via ethernet?
    here is the next problem, though. i bought a wireless adapter for my 360 and it cannot detect my network. it detects two other different networks that are in my complex but not mine. i have no idea if this is an airport issue or a 360 issue as powerbooks just automatically detect an airport base station. i have tried testing it in the same room as the airport with no luck. the only way i have connected to Xbox Live so far was to hard line an ethernet cable to the 360, shut the modem off, turn it back on and connect that way. if anyone knows anything about the 360 or has had similar problems trying to get their 360 up and running wirelessly through an airport please let me know
    Mac OS X (10.3.9)
    Mac OS X (10.3.9)

  • Pc cannot connect to internet via airport

    Hi
    I have an older Airport Extreme base station (round pyramid style) that is fine with my Mac (MacBook Air, iMac, iPad-2, iPhone 4+) and other wifi devices. 
    However, we also have various PC laptops (needed for work) that can connect to the Airport base station (PC= green line from pc to base, red line crossed through to internet Windows graphic) but NOT to the web (?)
    We have high speed DSL, and a modem plugged directly into the base station.
    How can I set Airport up or the PC laptops, so that the PC laptops can have access to the web and everything stays the same for all of my other stuff?
    Very behind in my work...
    boulevardier

    Hi,
    I believe you have the problem that I was able to correct last weekend on my son's pc laptop by updating the atheros wireless adapter drivers.  Here are two simple options to test if you need to get an updated driver for the pc wireless adapter.  The first is to just connect the laptop to the Airport Extreme with a network cable.  If that is not an option, enable the guest network with no security on the Airport Extreme and connect the pc laptop to the guest network.  If either method works, the wireless security method is the problem and a new driver was the solution.
    -G

  • Cannot connect to internet with airport

    My laptop connects to my network, but does not have internet access--although the main computer  does have wireless iinternet access through the airport's wireless connection.

    What happens if you power off the main computer completely and then restart the AirPort Extreme and laptop?
    Can the laptop connect now?

  • Using airtunes without connecting to internet through airport express

    I am currently using cablevision and a modem, wirelessly, working fine.
    have extensive music library, want to play it through home stereo wirelessly.
    acquired airport express. computer finds it fine, but cannot skip using A Express as wireless connection
    help?

    you should be able to launch Airport Utility and setup your Express from scratch. The process is fairly self explanatory for me however, I found this tutorial that is pretty good and should get you through this ok, it's got screen shots to use as reference and covers the setup you are attempting to achieve.

  • Imac G4 not connecting to internet through airport?

    I have installed airport on my G4 in the airport utility it shows a connection and the light on the AEXBS I have finally gotten to be green after struggling through blinking amber. When I go into sys. pref. >network>show Airport isn't listed?
    What can I do to fix this problem? I'm assuming if it's not listed that is a big problem.
    I have my base station connected to my modem via WAN port, base station also connected to IMAC via ethernet port.
    Been spending all day on this and just getting nowhere? Any suggestions?

    Make sure your G4 is compatible with AEBS I'm beginning to realize I may need an old airport card to resolve the problem.
    The amber light issue was resolved by going here
    http://www.apple.com/support/airport/

Maybe you are looking for

  • How to update item instance in oracle install base?

    Hi, I have a doubt in updating item instance in oracle install base. I am using a API named csi_item_instance_pub.update_item_instance for this. I want to update Party OWNER, party contacts, Current location,Install location, bill_to address,ship_to

  • Low quality when saving MMs pics

    I've been getting MMS pics of the kids from my wife's phone (not an iphone) for a while, and they look great on my iPhone 4 screen. The good ones I save to Photos. As of today, the new ones still look great on the screen, but when I save them the qua

  • Itunes not opening when connected

    Although I have the "open iTunes when this phone is connected" option checked on my 3GS - it is not happening. Any suggestions ?

  • Jdbc in applet

    Hi, I have an applet which is connecting to a database , getting some info in order to show it but when I run it from Eclipse->Run->Run As->Java Applet everything is fine. When I put it in .html <applet> tag and try to view it through appletviewer I

  • Creating a 3 tiered model application

    Really, what i am looking for here is a bit of advice on the best way to achieve somthing. Lets say i have a class A. In this class i have created GUI code and a few methods at the bottom. In this GUI application i have a text field and a password fi