Cannot connect to internet with static IP

Hello,
As the title says I cannot connect to the internet while using either the 'DHCP with manual address option.' or the 'Manually' option in my network preferences.
I know I have both the Subnet Mask and Router numbers right, and have tried a different range of '192.168.0.xxx' for my IP.
I realize that this question has been asked plenty of times before, but I still can't find a solution.
Thank you in advance.

Sorry for the late reply, I was away from the computer all day,
I hope this helps:

Similar Messages

  • TS1286 Cannot connect to internet with USB

    I am a new user of Ipod touch 5th gen 32 gig I cannot connect to internet with usb?

    Hi bikernblondie,
    When you say that you're trying to connect to the internet with USB, do you mean that you're trying to connect your iPod to the internet so that you can surf the internet with a browser on your iPod, or that you're trying to connect your iPod to your computer so that you can sync it with iTunes and bring over songs, movies, apps, etc.?
    - O.C.

  • Cannot connect to internet with firefox. Microsoft Explorer gives me an error message. I know my computer is connect, because I keep getting updates on the weather. What's up?

    I cannot connect to the Internet on my desktop with firefox since last night at about 8 pm. Everything was fine until then. I know I am "connected" because I get updates on the weather and my family tree works. I just cannot get email or surf the web. Please help.

    Microsoft Word is a Microsoft app. You should post your question to a Microsoft forum.
    Cheers,
    GB

  • Cannot connect to internet with iMac connected to airport via Ethernet

    Hi all,
    Firstly please forgive if this problem has been posted before but unfortunately i haven't yet been able to find a solution to my problem.
    I cannot seem to get my wireless network to work since updating my Airport to v5.7. I have reverted back to 5.6 but with no joy. OK, here's my setup - I have an iMac G5 1.8 which is connected to my airport via an ethernet cable (it is plugged into the correct port) and an iBook with an Airport card to connect wirelessly. The airprot is connected to my ADSL modem which is a D-Link 300T. When set up like this my iMac cannot connect to the internet even though my iBook can. When i take the4 iBook and Airport out of the equation my iMac connects fine to the internet via ethernet cable direct to my modem.
    As i've said, as soon as i bring in the iBook and Airport the iMac cannot connect via airport extreme, even though the iBook can connect.
    I have searched through the discussions looking for clues and answers. I have made sure that distrubute IP address is not checked and that internet sharing is off on my iMac but on on my iBook. I have tried all channels and all possible different settings on the airport admin utility but nothing works.
    I hope i've given enough information to give a clear indication what is wrong, if not please ask and i will try my best to answer. Any help would be much appreciated so i can convince my girlfriend that buying my iBook was not "a waste of money!".
    Many thanks in advance,
    Carl.

    Same questions as Paul.
    Open up the Network System Pref on the iMac G5.
    If you pick Show: "Network Status", what do you see ? Be precise.
    If you change Show: to "Built-in Ethernet", what do you see on the TCP/IP, PPPoE and Ethernet tabs ? Again, be precise.
    On the Network Status, you should see a green mark next to Built-In Ethernet, which should be at the top. It should also give you an IP address and tell you you are connected to the Internet. Well it would if it was working, so "say what you see".

  • Windows cannot connect to internet with airport

    I have a macbook with Windows via Bootcamp. I have DSL. My mac OS can access internet fine (wirelessly and ethernet). I can access internet through Windows if I connect directly through the modem (ethernet). If I connect ethernet through airport, I cannot connect. Of course I cannot connect wirelessly either. I would like to connect wirelessly. Any ideas?
    Thanks,
    Rich

    Richard,
    Some items to consider.
    First, can Windows see the wireless router? You can go under network settings in Windows and see if it "sees" the wireless access point. Or, you can log into the router and see if it sees Windows as a connected device.
    Do you have any security enabled on your router? If so, have you set up the security on Windows?
    Are you using DHCP on your router? If so, does Windows have a valid IP address?
    Also, have you made sure that the device driver for the Airport Card under Windows is current and working properly?
    Jeff

  • Cannot connect to internet with Huawei after upgrade from 10.7.4 to 10.7.5

    I have an iMac which came with os X 10.7.4.When I installed my Huawei E303 data card, I was able toconnect to the internet.
    After upgrading to 10.7.5 the system appears toconnect and I can text, but there is nointernet connectivity.
    Thanks for any advice

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    For 10.5/10.6/10.7, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • Can't connect to internet with static IP

    I'm trying to set up port forwarding which requires that every device on the network have a static IP address. Yesterday, while I was already connected, in System Preferences -> Network I switched the Configure setting from "DHCP" to "DHCP with manual address" and entered an IP address (192.168.0.10 if it matters). This allowed me to set up port forwarding for a number of things. However, after putting my computer to sleep I was unable to connect to the internet. I had to switch the Configure setting back to "DHCP". Any thoughts on how to get my internet to work with a static IP? My ISP is Rogers and my modem/router (single unit) is the SMC8014WG.

    Is your router IP address 192.168.0.1 ?? You must assign static IP addresses in the same subnet as your router is working. So generally speaking, the 1st 3 digits of your static IP address must match the router's IP address.
    2nd, you should assign static IP addresses outside of the range your router uses for DHCP assignments. Going though your router's configuration info should allow you to discover what range the router is using for DHCP. If the range covers everything from 2 through 254, then change its configuration so you have some room for assigning static IP addresses.
    NOTE: Some routers will allow you to continue to use DHCP and will make the Port Forwarding follow your system's MAC address (Media Access Control device; aka your ethernet address or WiFi address). If your router supports this, it would eliminate the need to use static IP addresses.
    3rd, it is possible that your Mac did not pick up DNS server addresses even in DHCP w/manual IP address. You could try configuring your own DNS server addresses via System Preferences -> Network -> Advanced -> DNS. You could just plug in your ISP's DNS servers, or you could even use the <http://OpenDNS.org> DNS servers.
    NOTE: If you are going to get into Port Forwarding so you can access your systems across the internet, you should look into getting a free <http://no-ip.com> or <http://dyndns.org> dynamic DNS name and running a dynamic DNS updater on one of your home systems. This will make it easier to find your systems when away from home.

  • Cannot connect to internet with huawei e220 after plugged in Ipod touch

    Guys, I have serious problem. I have a vodafone (spain) branded huawei E220 usb 3G modem. It used to work fine until i plugged in my Ipod touch. From then on the connecting app (Vodafone Mobile Connect) will hung up using 55% of CPU capacity.
    This is the second time i have this problem. the first time i took the opportunity to uninstall mac osx completely. It worked fine until i plugged in the Ipod touch???? I cannot get this thing running anymore...The problem lies not within the modem as it works under XP on same machine (bootcamp)
    Any help would much appreciated!

    I had the same issue with vodafone sofware.Just delete it and download the huawei app from this link.
    It will work great.
    http://www.huawei.com/mobileweb/en/doc/list.do?type=-1&id=736

  • I cannot connect to internet with an orange dongle

    I'm currently in Uganda and have been given an orange dongle to connect to the internet. I put it in installed the software automatically, but then nothing else happens. When I try and open the application it bounces at the bottom not he screen for a couple of seconds but then disappears. Another person has put it in her laptop windows and it works fine no problems. I'd be really grateful for help with this, please?
    Thanks

    You will have to contact the vendor of the service involved.  That is a third party device you are describing.
    Ciao.

  • Cannot connect to internet with my new i-pad

    I bought myslef an ipad yesterday while travelling. Set-up went ok, but I cannot get on the internet. I have activated the Airport on mt 2007 i-mac and the i-pad says it is connected to the i-mac network. Still something seems missing.

    just got mine - ipad 32GB , wi-fi model. Had the same issue. Using 02 broadband. the ipad was connecting properly but no internet. Updated the network to 802.11g and the encryption to wpa2. it works fine now

  • Safari cannot connect to Internet with cellular connection

    Setting up my iPad with 4G, the cellular data account is set with AT&amp;T, but the data is not flowing when wifi is off. Safari cannot get a connection. What am I missing?

    Have you talked to AT&T to make sure the account is provisioned correctly?
    Do you get a 4G/LTE label at the top of the iPad screen to indicate its connected?
    Is there Cellular service in your area?

  • Adobe Air cannot connect to internet with error code #2032

    When I was developing adobe air based product (Comm100 Live Chat, http://www.comm100.com/livechat/), I come accross such a problem: When I was trying to access internet from any Air application, I've been received error #2032. Have anyone met such situation before? How to solve it?

    Something's not right with your new Extreme. Return it to the Apple Store, or contact AppleCare and have them fix it.

  • Cannot connect to internet with airport

    My laptop connects to my network, but does not have internet access--although the main computer  does have wireless iinternet access through the airport's wireless connection.

    What happens if you power off the main computer completely and then restart the AirPort Extreme and laptop?
    Can the laptop connect now?

  • I cannot connect to internet eevnthough i have wifi,when im trying to login on FB it says unable to connect and same with YM it saysinternet connections appears to be offline,when in fact the WIFI smartbro is connected,and the signal is very strong...

    my itouch cannot connect to internet...but the other day i can use the wifi im connected,but since yesterday eventhough im connected to wifi and the signal is very strong,when im trying to login on FB it says unable to connect to FB,same with YM it says internet connection is offline when in fact i have a strong signal of wifi..

    - Reset the iPod. Nothing is lost
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    Do other devices successfully connect to the network?
    Does the iPod successfully connect to other networks?

  • Cannot connect to internet on PC laptops with Airport Express

    I had to purchase a new Airport Express today - old one failed. My G3 I Book connects to the internet with no problem. My two windows laptops (Toshiba and Dell ) are showing a strong signal but cannot connect to internet. Can anyone help with advice for settings on these two laptops ? By the way, I had no problem with my old Airport Express and these two PC laptops - need them for work ! Thanks!

    My two windows laptops (Toshiba and Dell ) are showing a strong signal but cannot connect to internet. Can anyone help with advice for settings on these two laptops ?
    Accessing a Airport Network with a Windows XP PC or laptop (with XP SP2)
    http://tech.ifelix.net/1011.html
    Accessing a Airport Network with a Windows XP PC or laptop (with XP SP1)
    http://tech.ifelix.net/1010.html
    iFelix

Maybe you are looking for

  • Back to school card validity

    Hello Sir,                         I purchased my Macbook air in September,2011 through student offer. I would like to know the validity(date and year) of the BACK TO SCHOOL CARD 2011 which came on purchasing.So,please let me know the details so that

  • Website asking for database login

    </p Hi, I need your help and please help me. I have a report that have been working all this time until IT dept told me to change the database to something else.  I changed the datasource and it is running just fine on my computer.  When I loaded my

  • Progress bar while downloading data

    I want a progress bar showing while I'm downloading data. This seems like a simple thing but I can't figure it out. If I show() the progress bar before and/or during the download it becomes a blank frame. I should probably use a thread, but I don't k

  • Calling checkin BAPI for DMS - RFC_ERROR_PROGRAM: RFC_START_PROGRAM

    We have J2EE application running under SAP WAS on Windows 2000/2003 and talking to SAP DMS. I am calling BAPI_DOCUMENT_CHECKIN2 using RFC and getting the following: com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: RFC_START_PROGRAM at com.sap.m

  • Joikuspot connection problems

    I have been unable to get the N700 to connect via the traditional bluetooth dial-up networking route (which has worked with every other phone since the 6310i) so I bought Joikuspot. It works... but it is very difficult to get anything to connect to i