Cannot connect to mac mini before login

I just got a mac mini (the latest model) and turned on screen sharing and ssh. After I login (using a wired keyboard), I can connect to it from my MBP using VNC or SSH. But if I simply turn it on and do not login, I cannot connect to it (and I cannot even ping its IP address). Plus, it will turn off after 5 minutes (it is not asleep because tapping on keyboard does not wake it). I think this is not expected. I should be able to remotely connect to it even if I do not login locally. Does anyone have a solution?

Can you check your router to see if an IP address is assigned to the mini from your MBP? If so, you should be able to access it. You're right; you shouldn't need to login to get an IP address assigned. That should be requested at boot. The other thing, if you haven't already done so, make sure in:
System Preferences > Energy Saver > Select "Wake for Ethernet network access", as well as:
System Preferences > Sharing > Select "Remote Login" and "Remote Management"
While I don't have a mini (considering one now), that's what I have done to access my Mac and it does receive an IP address prior to my logging in.

Similar Messages

  • Cannot connect from Mac Pro late 2013 to Macbook Pro

    Cannot connect from Mac Pro late 2013 to Macbook Pro . I have tried via ethernet and wifi. I can connect from the MBP to the Mac Pro but not vice versa. I have tried to connect to other MBP's on the same network with no luck. I try and connect as a registered user, as I usually do, with no luck. When I enter the Username and then Password the box vibrates as if the details are incorrect, they are not however.
    Thanks in advance
    Jeff

    It is 'just not working' again.
    To answer you question. Other sharing services work. I can connect as a guest. I can share screens. I cannot air drop.
    I cannot connect either way now i.e. from Mac Pro to MBP and vice versa.
    I cannot connect to my wife MBP either. My wife cannot connect to my Mac Pro.
    It neither works with wifi or ethernet cable.
    I can connect to my Time Capsule directly and Time Machine backups are working.
    The passwords are 100% correct.
    The Mac Pro is a late 2013. Does anyone else have a similar problem? I have never suffered this one before. Seriously effecting my workflow
    Thanks

  • I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

    I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

    Well, I really would love the new unreleased mac pro however , I'm not sure of the expected cost , Everyone speculates from $3,000 to $8,000, in which I may have to wait a while to purchase.
    To the point .... I want fully functional thunderbolt ports to be on the current mac pro's .... wonder if anyone had workarounds yet?...  or could I chain the the current mac pro to a mac mini to make that happen?

  • What do I need to connect my Mac Mini to a TV using the S-video jack?

    Radio Shack didn't have anything in the store and suggested
    that what I needed (something with an S-video connector
    at the adapter end and a co-ax/F-connector at the TV end)
    would cost $100.
    What should I be looking for? I'd like the option to connect
    my Mac Mini to a TV (with enough resolution to read text,
    which isn't the case with a video-RCA cable), especially in
    a hotel room (using the Mac Mini as a laptop!).

    The DVI to video adapter
    <http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/6454000/wo/jP1F dznaaoNs2dPRALa1K0FqrB2/3.0.21.1.0.8.25.7.11.2.3>
    will give best results using the S-Video. Next best is composite video. If your TV set does not have either of these, you will need a RF modulator to connect to the TV antenna connector. For best results get a modulator that takes S-video. It should cost a lot less than $100.00 Radio Shack has one for $25
    <http://www.radioshack.com/product/index.jsp?productId=2103095&cp=&origkw=rfmodulator&kw=rfmodulator&parentPage=search>
    No matter what connection you use, a standard TV will not give you better than 640 x 480 resolution, so it will always be hard to read small text.

  • How do i connect my mac mini to a kvm switch using the hdmi to dvi adapter?

    I want to connect my Mac Mini using the HDMI to DVI adapter to a KVM switch cable. I have an Iogear KVM switch. The cable from the KVM switch has a male VGA end connection. I have been trying to determine the right adapter to connect the female DVI connection to the male VGA connector. I will be using the Mac mini and a PC running through the KVM switch. This is doable as the iogear switch is compatible with both a PC and a Mac. Any ideas out there? Thank you.

    You would need to get  HDMI or DVI to VGA CONVERTER, not a simple adopter. The converter requires USP connection for power. HDMI is only digital while VGA is analogue.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16812699001&nm_mc=EMC-IGNEFL 070414&cm_mmc=EMC-IGNEFL070414-_-EMC-070414-Index-_-AudioVideoSplitters-_-126990 01-L019B
    If your MIni has a mini displayport or Thunderbolt port yu can get a les expensive mini displayport to VGA afopter.

  • When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via minidisplay port. Anybody knows how to fix this?

    When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via the minidisplay port. Anybody knows how to fix this?

    Was just on the phone with Apple about this.
    The solution was as follows for me anyway...
    Go to your Finder
    Choose the Go Menu
    Choose Computer
    Choose your Macintosh Hard Drive
    Choose your "Library" Folder
    Choose the "Preferences" Folder
    There should be a folder called "Audio"
    Move that whole folder to the trash
    Empty the Trash
    Restart from the Apple Menu
    When you are back up and running;
         Choose System Preferences from the Apple Menu
         Choose Sound
          In the output tab you should now be able to make the HDMI "Sticky"
          Enjoy your sound over HDMI and no more dirty knees or broken backs unplugging the desktop speakers!
    Mac Mini 2011 2.5Ghz 8 GB of RAM - Planar 17" VGA via display port adapter and Samsung 26" LCD TV via HDMI

  • Connecting my Mac Mini DVI video output to Dell W3706MC LCD TV VGA Input

    I tried connecting my mac mini to the Dell W3706MC LCD TV VGA input but it wanted me to change the resolution of the mac to 1360 x 768 at 60 Hz. I did that but it still would not display the video. I tried my PC laptop and that worked fine with different resolutions. So I know that there is nothing wrong with the TV. Did anyone experience this same problem?
    Any help would be great.
    Thanks,
    Karl

    I'm confused about your comment "it wanted me to change the resolution of the mac to 1360 x 768 at 60 Hz." I presume the way this was communicated was through a dialog box, correct? But if you could see a dialog box, that means you had a working screen at one point, correct? Why don't you just run at that resolution?

  • Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?

    Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?

    Welcome to the Apple Community.
    The iPad 1 is only able to do basic AirPlay, many providers of programming have blocked their apps from working with AirPlay.

  • Can i use iCloud for connecting a mac mini with a macbook?

    I want to know if the connection between mac mini and a macbook is possible.
    Or do i have to use an i phone as well?

    Welcome to the Apple Community.
    You can sync calendars, contacts and mail between computers.
    Documents requires mobile versions of iWork to work, but If you want to upload documents that aren't for use with iOS devices this User Tip might be of interest.

  • Lenovo monitor connected to Mac mini

    I have a Lenovo LI2223s monitor connected to Mac mini - and works fine when from full start up.  But when has been in 'sleep' mode overnight, does not display any longer upon wake-up.  Is there something I can do to correct this problem? (waking the monitor does bring up a very very dim light there somewhere - but general appearance of monitor is blank - mini is no longer sleeping)

    OS X: When your Mac doesn't sleep or wake - Apple Support
    Mac mini 2014 won't wake monitor via HDMI
    The above also applies to other monitor connections

  • I want to connect a Mac mini to a Samsung 40", Whats the best way to do this?

    I want to connect a Mac mini to a Samsung 40" LED tv to use as the monitor, whats the best way of doing this?

    Understand that there is one HDMI port on your TV that is specifically designated for PC connectivity. The order that the TV or Mini are powered on may determine your results. For your specific TV model, check buyer reviews on Amazon or elsewhere that can include optimum TV/Computer settings adjustment for improved viewing results.

  • Failed to issue print from win7 laptop to Canon MP230 which is connected to mac mini os x 10.8.3

    HI
    I have recently bought a Canon MP230 printer and connected to my Mac Mini 10.8.3 usb port.
    To setup the printer I downloaded the latest driver from canon web site and install all of them
    When I issue print from my mac mini it works fine.
    Next step was to issue print from Windows 7 laptop .
    To do that I intalled Bonjoure in my Windows 7 latpot and set the printer connected to MAc Mini as default printer.
    Upto this point every thing works fine.
    When I tried to issue print from my Windows 7 laptop the printer gets activated the power button start blinking . But it just pass a page from
    input tray to out tary without printing  a single line. I have looked into cups server page at my mac mini. It shows that the job fired from windows
    laptop was done.
    I treid a lot debug it myself . But no luck yet.
    Please help me. I am very upset.
    Thanks
    Anirban

    I just updated to 10.8.3 today, and my computer and Apple TV won't even recognize each other now.  I have absolutely no advice, but wanted to throw this in so you (and Apple) know you're not the only one. 

  • Is it possible to connect a mac mini OS 10.6.7 to vista PC ??

    Is it possible to connect a mac mini OS 10.6.7 to a windows vista or windows 7 PC ?? If so how !

    hey try this click on the finder then go to top and click the Go menu then go down to connect to server and put in for example smb://Computer IP address goes here for example smb://192.168.0.6
    Good Luck!

  • What is the best way/quality of connecting my Mac Mini to an external HiFi system?

    Hello,
    I am using my Mac Mini for storing and playing music using iTunes.
    In terms of audio quality, what would be the best option for connecting the Mac Mini to my external HiFi system?
    1) Using an optical cable?
    2) Using a analog cable?
    3) Using a USB connected DAC? (maybe the best option but surely the most expensive)
    If the option 3 is only the good one, would suggest a DAC product?
    Thx for your help
    Best Regards,
    -- Jean-Baptiste

    The optical output is capable of doing 5.1 surround sound (as well as 2.1 or basic stereo) and is therefore more than capable of fully supporting lossless audio formats like AIFF, WAV, FLAC, Apple Lossless as well as all DVD audio formats. The optical (TOS-Link) interface is not capable of fully supporting the higher end audio standards supported by Blu-Ray discs.
    For full Blu-Ray support you would have to use a HDMI interface.
    So with regards to purely CD sourced material and even potentially DVD-A (DVD Audio discs), and SACD (Super Audio CD) it should be fine.
    Some anally retentive audio fanatics will say that potentially some of the signal can be lost over a TOS-Link optical connection and they would insist on having an audio interface to act as a dedicated DAC (Digital Audio Convertor) with direct links to the speakers. I would say ordinary humans will be more than happy with a lossless audio format being sent over an optical link which will definately be superior to AAC over a copper wired link.

  • No video signal in remote connection with Mac mini when the display is off

    No video signal in remote connection with Mac mini when the display is off

    So you mean that Mac mini is different than other ordinary computer and is need an active display to avoid black screen in remote session!!!!!Oh my god, Steve would be embarrassed!

Maybe you are looking for

  • 10.3.9 doesn't show up as a startup disk

    A massive pain here. I'm at a friend's computer helping him with problems on this outdated 350Power PC with 256MBRAM. It's running (usualluy 10.3.9) I started up from classic to check something and when it loaded it tells me I'm in 9.2.1 (not 9.2.2)

  • So called "Expert Day" on Jan 11-12, 2011

    This image on the HP site says the expert day is the 11 thru the 12th, so why has it ended already?  I noticed that hardly ANY of the posts for help users were answered.  Where were the experts yesterday? I also looked at all users in the forum for p

  • Can I get a new macbook pro under the warranty?

    Its been two months since I got my macbook pro. I got the newer 2011 version. Less than a month into getting it my keys started falling off and less than 2 months later my hard drive went out for no reason and I had to get it replaced. And now my oth

  • Problem: Importing external Lybraryes

    Good Morining everybody I've a problem when I Deploy my progect with netweaver developer studio. My progect import some external lybraries for example Strutz's lybraries. I import external jars before make deploy and all is right. the problem born wh

  • Implementing PCA for Balance Sheet - SD/MM/AA Dependancies

    Hi, Currently we use PCA but has really only been utilised on the P&L side of things. The business want to implement PCA such that we can get a balance sheet also. We are on 4.7 I am aware of most of the steps within FI that I need to do but am wonde