Cannot connect to modem's web-based-configuration program

Hello,
I'm trying to connect to my modem's (D-Link DSL-321B) web-based-configuration program by giving its ip-address (192.168.1.1) in a Safari widow. I get the error message "Safari can't open page 192.168.1.1 because the server where the page is located isn't responding".
The modem is connected via ethernet cable to an airport time capsule. The mac is then connect via WiLan. I have tried other web browser programs, rebooted everything, reset the modem, connected the modem to my macbook via ethernet cable and read ALOT of information but I still can't find the solution and get into the menu. BTW, all Mac software is up to date.
I would be really grateful for some help. Thanks in advance.

Hi Linc, thanks for the reply and sorry for the delayed response. I have tried your recommendation and unfortunately, it did not help, same error message. Any other suggestions? Thanks

Similar Messages

Web Based Configuration possible security flaw

My coworkers and I found something quite interesting today...despite having configured FTP security settings (which have been confirmed to be set up and funcitoning. I can't open an FTP session to our remote target without specifying an admin user name and password) if you open the NI web based configuration tool in a browser, you can FTP to and from the target using the remote file browser without being logged in at all! Has anyone else experienced this??
CLA, LabVIEW Versions 2010-2013
Solved!
Go to Solution.

Apparently, these permissions are separate from FTP, but you can set these particular permissions on the Security configuration page of the web based configuration utility.
CLA, LabVIEW Versions 2010-2013

Cannot connect to target eHR web site

I cannot connect to eHR target web site. from my home computer which is running windows 7.
I get this error message from Chrome
"Not Found The requested URL /SecurityBrokerage/forms/login.asp was not found on this server."
This error from IE 10 gives me
"The webpage cannot be found HTTP 404"
I get the same error from my laptop that has windows xp IE 8.
the eHR web site is assessed from this page.
target.com/spot/team-services#?lnk=fnav_t_spc_1_13
At work (windows xp IE 8 ) I was able to access the website so I think it is a Verizon problem

Works for me on Windows 7 and Firefox.
My guess is that the OP has received an IP address that is defined in a Bogon filter somewhere that identifies that address as a "bad" site. If that is the problem it should be easy to fix, just turn off the router before going to bed and turn it on the next morning, it is very likely that a new IP address with be assigned, and the problem will disappear. It might be a good idea to record the current IP address and then check the new one to make sure it has actually changed.
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.4
Keller, TX 76248 (VHO 1)

Web based mail program like hotmail or yahoo

Hi All,
How do I create a web based mail program like yahoo or hotmail using Java Mail API?
If any one knows please let me know.
my email id: [email protected]
Thanks and Regards,
Sarat

Dear sarat,
First of all u tell me why u want to develop web based mail like yahoo or hotmail, If u want to develop for learning purpose then start from today using java mail API. So u should know Java Mail API. and some webbase scripting like JSP and HTML.
Once u start and if any problem then write in forum we will solve.
If u don't want to develop for learning purpose then u buy it.
Regards
Kinjal Shah.

Web-based mail program as default for emailing photos?

I'd prefer to use my gmail account to send photos, rather than my Mail account. But the options are only for Mail, Entourage, and AOL, I think.
I can't seem to figure out how to do this any other way than from gmail, click "attach a file" and browse through my directories and select each individual photo. This would be fine, except that the attachments are enormous and I can't figure out how to resize them to a manageable size.
So, to summarize. Is it possible to use a web-based mail program as your iphoto default? If not, how can I shrink the size down to 240X320 or 640X480, or somewhere in that range?
I'm using iphoto 4.0.3. Thanks.

There are programs that allow you to designate a web mail page for the default email program (WebMailer for one). I would guess they should work the same jumping from iPhoto, but don't know how well they'd work at attaching an image since that is usually a process specific to how the page is designed.
Probably, it'd be easiest to leave Mail as the default email app with Gmail set as the default account, for situations like this, and use the regular webmail interface when you're not planning to attach an image if you like that interface more.

Connection SQLite with Flex Web Based App??

Hi! I have a problem, I create a Flex Web Based App in Flash Builder 4 and I need connect that app with my SQLite database... but I can't found the method that permit me create that connection.
My question is... exist some method or some kind of code with I can do the connection?
Can someone help me, please?

SQLLite is only available in AIR apps.
The preferred method for a web-app is to use some kind service architecture to expose your data. I wouldn't be able to offer any specific advise without knowing more about your deployment environment.

I have an officejet 7500 e910 cannot connect to my eprint web services.

I have an Officejet 7500 E910.
I registered and got my eprint address.
I tried to login and cannot remember my password. Tried forgot password link, entered email address, clicked ok, and nothing happens. the box stays, I don't get an email from hp, I cannot login to my printer's address, nothing....
Also tried connecting directly from printer's control panel. Nothing. Printer cannot connect to server, try using proxy settings, etc...
Could somebody please help me figure this out?

Make sure you are entering you personal email address not the printer's email address. Check your email spam folder for the email from hp. Let me know if this helps.
I am an HP employee

How can I add a different web-based email program to use as my default 'mailto:' function?

When I go to Settings -> Applications and click on 'mailto', I see 'Use Yahoo mail, Use Gmail, and Use other...'. I want to use the Go Daddy Workspace Webmail application, which like Yahoo & Gmail, is a web based program, but don't see any way to add that option. The 'Use other...' option is only looking for an executable file and it won't accept a web-based command.

I found an old thread about the same type of issue. I cannot be certain whether it still works or not. Feel free to checkout the thread [https://support.mozilla.org/en-US/questions/917427 here].

Accessing web based work program with Citrix Server

Can I access a web based program that uses a citrix server with the ipad2 -- I currently access this with my laptop but thinking about using the iPad2 for work

H E L L O ! - a JAVA book probably by Sue ???
So you know about this then? - GOOD!
Actually the first chapter is all about the early attempts to succeed in achieving computational result with a binary output, plus of course the history of programming perverts and people who were relatively normal once upon a while. It goes from Nigel Astley Heatherington-Smythe, who as one time assistant to Charles Babbage spent the remainder of his twilight years with the Tuareg people of North Africa, mounting camels and cackling insanely to himself whist reciting natural logarithm tables. And spanning right accross the decades to the present day 'uj' from Sweden, who seems to be suffering from a severe gender identity crisis typical of many of his forebears.
(The second chapter is about spanking ... mostly)

WRT160N v3: Cannot connect to router setup web page with current Firefox or IE

Every time I try to connect to the admin page of my router, I get "The connection to the server was reset while the page was loading." This happens with FIrefox 11, and started when I upgraded to 8 or 9. A machine running FF 3.6 does not exhibit this problem; I get right in. What IE 9 says is "Internet Explorer cannot display the webpage" (after complaining about the expired certificate).
I ran Wireshark to see if I could learn anything, but all I could figure out was this:
https handshake was OK.
First TLS packet is received by router, which then immediately issues a reset and ends the connection. I don't know why.
Has anyone seen this? or have I got a screwed up configuration (or router)?
Solved!
Go to Solution.

castor wrote:
"The connection has timed out", seems to affect servers at MozilllaZine, for Firefox on Windows...
I'm not sure what this has to do with my problem; my difficulty is only in trying to talk to the router configuration page. Everything else works just fine.
~~ Tools > Options
~~ Advanced (tab) -> Network (tab) > "Setting"
~~ (X) Auto-detect proxy setting for this network
I have "use system proxy settings". Since this is a home network and I'm not using a software proxy on my machine, I know there is nothing between me and the router.
Second, let me know if you have enabled 'https' in the router management page. What is the IP address on the computer when connected to the router. To check the IP address that you are getting from the Router... You can check the IP address in the following manner:
# Click on Start -> All Programs -> Accessories -> Command Prompt.
# A black pop up box should come up, type: "ipconfig /all" …
This is not going the right direction, but to satisfy your curiosity:
   IPv4 Address. . . . . . . . . . . : 10.244.122.142(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.244.122.1
   DHCP Server . . . . . . . . . . . : 10.244.122.1
These are correct. (Since my telco DSL has me behind its own NAT router and has assigned my modem address 192.168.1.2, so I could not use Cisco/Linksys's manufacturer default address settings.)
There check the IP address and Default Gateway under LAN….
If it provides the valid IP address then try to connect the router to a different computer and then try to open the router setup page...
I have a linux virtual host (thanks to VMware) now running Firefox 5, and it can talk to the router setup page just fine, once I accept and save the invalid certificate the router presents, at https://10.244.122.1. So I conclude the problem is to do with the later version of Firefox (currently 11, but I had this problem with 10 and maybe with 8 and 9).

Cannot connect to HP ePRINT Web site with LaserJet Pro 400 colour MFP M475dw

LaserJet Pro 400 color MFP m475dw- Just installed. Scan, print ,copy ,fax all working fine! using WiFi
Using IMAC OS 10.8.2 with all updates
Using Netgear router DGN2200v3
Printer will not connect to HP ePrint Website
Printer connects to the Hp Support and Profile for fax set up etc. But the "HP Web Services" Section when entered and hit the Enable Button-- It does not connect to the site --- it just seems to just refresh.
if i try to connect thro the printer not the imac and try enable web services it says" Connecting " on the screen BUT after a few minutes of trying -------- then says " CONNECTION ERROR-- the printer is unable to connect to the service. Check the internet connection
ANY IDEAS-- AM I MISSING SOMETHING ???
MANY THANKS
This question was solved.
View Solution.

I would try pulling up the embedded web server (EWS) by entering the IP address for the printer in to a browser and set a static IP address & DNS.
The information for the default gateway, subnet mask and that IP address can be accessed from the Setup menu on the front panel, go to Setup>> Reports>> Network summary and that will print it off.
Once you have entered the IP in to a Browser and have the EWS pulled up, navigate to the tab at the top labeled “Networking”. Then click on IPv4 in the left column; that will bring up the Address configuration page. Set the radio button to manual and fill out the IP address, Default gateway and Subnet mask with the information from the report. Do not worry about filling out the portion titled WINS server, that can be left alone.
You will then want to fill out the DNS portion of the page, The Preferred should be set to 8.8.8.8 and the alternative/secondary should be set to 8.8.4.4. Then click “apply”
Power cycle the printer. Turn it off, wait 30 seconds and then turn it back on. Once it is completely up and running reattempt to connect to web services.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Linksys WRT54GX-v.2 Router Web-Based Configurator

The manual for this router says that a Mac can access the configurator for this router, yet when I do I get nothing but a couple graphics. No text. Why won't any browser on my computer render the page? Anyone else have this problem?

Hi,
Welcome to the Apple Discussions.
Some of these embedded web servers like the config pages in routers and the status pages in cable modems can be kind of funky. I have a wired Netgear router and have found that it works better with Camino or Firefox than Safari.
charlie

Cannot logg in into router web-based setup

Ive tried installing my WRT54GS router with LELA but it says that it cannot detect my router, so I tried to configure on the web-base setup and when I try to go in the page it says that it cant find that page. If any one knows how to logg in into the router in a different way please let me know.

try few more settings ... disconnect the Mode from the router ... Reset the router fro few seconds ... make sure that while holding the Reset button the Power light should be blinking ....hold it for few seconds .... unplug -replug the power cable & release the reset .... Check the Ip address as i mentioned in earlier post .... disable all firewall for few minutes ... try to ping the Ip address 192.168.1.1 ...if getting replies .... try going online ....

IPhone cannot connect to Exchange Outlook Web Access ( OWA )

Let me start by saying that my company will not activate POP or IMAP on their Exchange mail server. I am stuck with using their OWA interface into Exchange. However, when I enter the web address for OWA it never gets there. The iPhone will get to the login screen, but can never access the web interface.

Hi,
If you browse to the OWA address from a Microsoft Windows system using Internet Explorer, does it bring you to a web form to login or do you get a Windows login popup (NTLM)?
I have tried accessing OWA where Exchange is not setup for a "forms" web page login, but rather popping up a windows login box to enter username and password.
It worked.

Safari, iChat cannot connect to internet but FF and other programs can

I upgraded from 10.5.8 to 10.6 and the upgrade is mostly very good. SL is nice and snappy, programs launch faster etc however....
Initially I had the no internet problem which I fixed by trashing the plist files in SystemConfiguration folder and rebooting. So that all worked and I could use the internet however....
The weirdest thing is that Safari will not connect to the internet, it just loads, then beachballs then I have to force quit it. Software Update does not work - just won't connect to the net and iChat just loads and shows nothing. Preference menu item is greyed out and noen of my accounts are shown there and it can't connect to the net however...
Very oddly, Firefox, MailPlane, Netnewswire etc all work perfectly and use the internet and all is fine. So there must be something somewhere aside from the plists I have deleted that are not allowing the connection with the Apple apps.
It's really my first experience ever of having a major issue on a system upgrade. I really don't want to have to do a clean install if I can help it.
Any help would be great thx.
Message was edited by: SRV007

When this occurs it's usually because a proxy is set in the Network preference pane when one isn't needed or vice-versa.
Firefox uses its own proxy settings and as such doesn't rely on the settings in System Preferences.

Cannot connect to modem's web-based-configuration program

Similar Messages

Maybe you are looking for