Cannot connect to my WIFI network since updating to IOS 7.0

Since updating to IOS 7.0, I have been unable to connect to my (or any) wifi network.
I have tried every suggestion / help from the forums / web searching.
I have tried different wifi connections (all the same - unable to connect to network).
Waited for the 7.0.3 to see if this has fixed the problem, but no..
I'm extremely frustrated and would like Apple to help.. I'm not the only person with this problem - and I haven't seen a single response from apple regarding this.
Since I am now out of the 1 year warranty - I will be pursuing this through the 'sale of goods' act in the UK if I don't receive a satisfactory response - I expect my device to last longer than a couple of years and consider the ipad broken as a result of the update...
Have been very happy with my apple devices up to this point, but loosing patience now!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5.  Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

  • TS1398 Cannot access my wifi network since updating to OS7

    I cannot access my wifi network since updating to OS7. Need wifi to make any changes - even to update for bug fix - help!!

    Try power cycling your router. Un plug it, count to 20, plug it back in and let it reboot.
    You can also try going into your iPad and 'reset all network settings'.

  • HT4262 I have two networks one each in two cities.  Both are named the same but require different passwords. I am at my second location but cannot connect to his wifi network. How do I delet one network so I can connect to my second network?

    I have two networks one each in two cities.  Both are named the same but require different passwords. I am at my second location and cannot connect to this wifi network. How do I delet one network so I can connect to my second network?

    Just go to the wireless network preferences and empty out all the stored wireless networks.. then scan and connect to the local wireless.
    Select them and tap the - button below it.
    Once they are emptied out.. it might be good to reboot the computer with the remember networks unchecked.
    Start with a clean slate.

  • I have iphone3gs current software ver. is 4.2.1 and it cannot update to software version 4.3. Please help me. I tried to restore the settings of my iphone but still no work. im using the current ituned 10.4. Second, I cannot connect to all wifi networks

    I have iphone3gs current software ver. is 4.2.1 and it cannot update to software version 4.3. Please help me. I tried to restore the settings of my iphone but still no work. im using the current ituned 10.4. Second, I cannot connect to all wifi networks

    But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939.  Then how its become 3G.

  • TS1398 Trouble accessing O2 wifi hotspots since updating to IOS 6

    Has anyone else got this problem, I updated my iphone 4 last week and now can't access the O2 wifi hotspots in McDonalds etc.?

    Update:
    Took my ipad into the Genius Bar today and they sent me home with a new one. He tried resetting two or three different things while I was there and after all his resets, he couldn't get it to even connect to their wifi network.

  • HT4623 I cannot access itunes on my iphone since updating to ios 7?

    I cannot access itunes on my iphone 5 since updating to ios 7?

    Hi rickwebby,
    If you are having audio issues with your iPhone after updating to iOS 6.1.3, you may want to update to the recently released iOS 6.1.4 and see if the issue persists:
    Apple Support: iOS 6.1.4 Software Update
    http://support.apple.com/kb/DL1652
    Cheers,
    - Brenden

  • [WORKAROUND] Cannot connect to any WiFi network after resume

    Hi, I'm having one weird problem that makes my laptop not as mobile as I'd like it to be..
    Literally, I have to boot it up again after each move.
    Here's the issue: if I suspend to ram, and then resume in a place with different WiFi network, it can't connect to Internet again.
    I'm using NetworkManager via corresponding plasmoid in KDE (although, nmcli does not work either).
    When I click a network name, I get the following:
    "Configuring interface" .... -> Cannot connect to {NetworkName}
    (the labels might be a bit different, as I get all notifications in my local language)
    Have anyone experienced this before?
    Or, AT LEAST, how can I get a bit more verbose output from NetworkManager? Is there a log file?
    Here's the hardware:
    05:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
    Here's what I've tried already (and it didn't help):
    # systemctl restart NetworkManager
    # modprobe -r ath9k
    # ncmcli nm sleep false
    WORKAROUND FOUND: When I get "Configuring interface" .... -> Cannot connect to {NetworkName} (it happens not only after resumes, btw), I type the following in the console:
    sudo dhcpcd -k
    So much time passed, so many updates -- still have to do this manually... %)
    Last edited by mityukov (2013-12-03 10:19:12)

    hadrons123 wrote:Try these methods
    https://bbs.archlinux.org/viewtopic.php?pid=1241694
    Here's what I've tried:
    # stop NetworkManager first, just in case if it would not start anything before time
    sudo systemctl stop NetworkManager
    # kill wpa_supplicant (one of suggestions in the topic)
    sudo killall wpa_supplicant
    # re-load kernel module with nohwcrypt=1 (another suggestion in the topic):
    sudo modprobe -r ath9k
    sudo modprobe ath9k nohwcrypt=1
    # start NetworkManager again
    sudo systemctl start NetworkManager
    Then tried to connect the network again: the issue is till the same. Here's the latest dmesg:
    $ sudo dmesg -c
    [ 3079.006749] ath9k: ath9k: Driver unloaded
    [ 3111.623220] cfg80211: Calling CRDA to update world regulatory domain
    [ 3111.694588] ath: phy0: ASPM enabled: 0x43
    [ 3111.694594] ath: EEPROM regdomain: 0x65
    [ 3111.694596] ath: EEPROM indicates we should expect a direct regpair map
    [ 3111.694599] ath: Country alpha2 being used: 00
    [ 3111.694600] ath: Regpair used: 0x65
    [ 3111.697195] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    [ 3111.697465] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900140a0000, irq=16
    [ 3111.717234] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 3136.958046] r8169 0000:03:00.0 eth0: link down
    [ 3136.958159] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 3138.903691] wlan0: authenticate with 00:24:8c:65:bb:d5
    [ 3138.911517] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
    [ 3138.911567] wlan0: send auth to 00:24:8c:65:bb:d5 (try 1/3)
    [ 3138.917180] wlan0: authenticated
    [ 3138.917697] ath9k 0000:05:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
    [ 3138.917711] ath9k 0000:05:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
    [ 3138.917718] ath9k 0000:05:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
    [ 3138.918897] wlan0: associate with 00:24:8c:65:bb:d5 (try 1/3)
    [ 3138.932402] wlan0: RX AssocResp from 00:24:8c:65:bb:d5 (capab=0x411 status=0 aid=3)
    [ 3138.932553] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 3138.932790] wlan0: associated
    [ 3139.406632] wlan0: deauthenticating from 00:24:8c:65:bb:d5 by local choice (reason=3)
    [ 3139.415815] cfg80211: Calling CRDA to update world regulatory domain
    [ 3143.712977] wlan0: authenticate with 00:24:8c:65:bb:d5
    [ 3143.720532] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
    [ 3143.720582] wlan0: send auth to 00:24:8c:65:bb:d5 (try 1/3)
    [ 3143.731367] wlan0: authenticated
    [ 3143.731865] ath9k 0000:05:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
    [ 3143.731882] ath9k 0000:05:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
    [ 3143.731888] ath9k 0000:05:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
    [ 3143.735093] wlan0: associate with 00:24:8c:65:bb:d5 (try 1/3)
    [ 3143.748277] wlan0: RX AssocResp from 00:24:8c:65:bb:d5 (capab=0x411 status=0 aid=3)
    [ 3143.748533] wlan0: associated
    [ 3144.140732] wlan0: deauthenticating from 00:24:8c:65:bb:d5 by local choice (reason=3)
    [ 3144.148708] cfg80211: Calling CRDA to update world regulatory domain
    [ 3148.642615] wlan0: authenticate with 00:24:8c:65:bb:d5
    [ 3148.650085] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
    [ 3148.650132] wlan0: send auth to 00:24:8c:65:bb:d5 (try 1/3)
    [ 3148.665772] wlan0: authenticated
    [ 3148.666264] ath9k 0000:05:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
    [ 3148.666278] ath9k 0000:05:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
    [ 3148.666284] ath9k 0000:05:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
    [ 3148.667980] wlan0: associate with 00:24:8c:65:bb:d5 (try 1/3)
    [ 3148.681955] wlan0: RX AssocResp from 00:24:8c:65:bb:d5 (capab=0x411 status=0 aid=3)
    [ 3148.682212] wlan0: associated
    [ 3149.016733] wlan0: deauthenticating from 00:24:8c:65:bb:d5 by local choice (reason=3)
    [ 3149.031462] cfg80211: Calling CRDA to update world regulatory domain
    [ 3153.648602] wlan0: authenticate with 00:24:8c:65:bb:d5
    [ 3153.656323] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
    [ 3153.656374] wlan0: send auth to 00:24:8c:65:bb:d5 (try 1/3)
    [ 3153.659859] wlan0: authenticated
    [ 3153.660389] ath9k 0000:05:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
    [ 3153.660403] ath9k 0000:05:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
    [ 3153.660410] ath9k 0000:05:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
    [ 3153.663889] wlan0: associate with 00:24:8c:65:bb:d5 (try 1/3)
    [ 3153.672276] wlan0: RX AssocResp from 00:24:8c:65:bb:d5 (capab=0x411 status=0 aid=3)
    [ 3153.672536] wlan0: associated
    [ 3153.967817] wlan0: deauthenticating from 00:24:8c:65:bb:d5 by local choice (reason=3)
    [ 3153.980619] cfg80211: Calling CRDA to update world regulatory domain

  • HT1595 Cannot connect Appletv to wifi network

    Appletv doesn't see my wifi network. It doesn't see it when I enter my IP address manually. Help?

    If there is no network entering an IP address does nothing since it would not beable to connect to that IP.  If your WiFi network is not comming up it might be one of the things below.  While it is possible to use AppleTV with WiFi and will mostly work it is not extreamely reliable.  Streaming video, espeically HD video over WiFi usally does not work that well for very long.  So you would probably be better off using a wired connection.  It is up to you though.
    Things to look into:
        1.  ATV may be too far from the router.
        2.  The router my be set to not broad cast it's SID which would prevent connecting devices from seeing it.
        3.  The router might have MAC address filtering turned on which could be preventing ATV from being able to cnnect to it.
         4.  The router might be configured to use one of the Enterprise encryption standards that ATV does not support.

  • Cannot connect to any IM clients since updating to snow leopard.

    Hey Guys
    I'm having a problem with my IM clients since updating to 10.6. I use Adium primarily and have Microsoft messenger through Office 2008 installed. Every time I try and connect to the servers I get a message in Adium telling me it has a connection error and Microsoft Messenger tells me I am not connected to the internet. I have tried other clients such as Pidgin and have the same issues and my MSN still works on my windows desktop. I am absolutely stuck with what to do. Adium support says that as it doesnt work on Microsoft messenger its nothing to do with them and its a issue on my side :S.
    Any help is appreciated.

    Thanks for responding guys. I looked to see if their was a firewall option somewhere I could disable or make a exemption for but came up with nothing. Today I reinstalled snow leopard again and every thing seems ok now. I really am not sure what the problem was.
    Thanks for your help anyway. this could help others in a similar situation.

  • My wifi stinks since updating to iOS 6.0.2

    Since updating my iPhone 5 to iOS 6.0.2 my wifi is horrible. It will show that I have full signal and full wifi signal but my phone will not download anything. I have to restart my phone to get it to do anything. What do you guys think? Any fix yet?

    I was thinking the 6.1 was going to solve all my problems (4 hours battery life and wifi useless) but no!! I'm done with this phone, and for make it worst, in my country there is no Apple Store. I bought it in Movistar (mobile network), and they said I have to leave the phone in "study" for more than a week... They need a week to note that the battery life is 4 hours! What I'm supposed to do more than a week without a phone? My phone was working fine with the 6.0.1

  • Why my MacBook Pro cannot connect to any wifi networks while there was no problem to doing that in the past p?

    I used to connect wifi now I cannot. Why? Need to obtain new IP address and how ?

    Hi Ole, and a warm welcome to the forums!
    It could be a HW problem, but does it get many black bars in the Airport icon?
    See if this helps hers...
    Go to System Preferences
    Click Network
    Highlight AirPort and click Configure...
    Choose “By default, join: Preferred networks”
    Select her access point(s) and Remove all her access point with the minus button.
    Launch her keychain access in Utilities and delete her access point keychain entry.
    Reboot
    Go back to the “By default, join:” page and click the plus this time to add your access point. Enter the correct password, save, reboot.

  • I just downloaded ios 6.1 on my iphone and now i cannot connect to any wifi networks on my mac

    Can someone help here?

    Updating iOS on your phone would not have any effect on your Mac.
    What exactly is the problem?

  • Ipad 2 wifi issues since updating to ios version 4.3.3..

    I have tried everything to remedy this on my own but to no avail.  I am picking up a great signal strength from my wifi on my ipad 2, but I just don't seem to get enough 'juice' to load a webpage.  I seem to be able to check email every now and then....this is incredibly frustrating.  This is my first Apple product that has wifi (have had ipods for a while) and I am not liking this at all.  I use my ipad 2 for everything now, I need help!

    Glad/sad to see it's not just me.  Hopefull they will publish a fix for the last fixsoon.  I've tried all the remedies on CultoOfMac, to no avail either.
    iPad1 and iPhone4 both TKO'ed at this point.  Very sad to see it happen in the middle of a session or appstore download!!!
    Tom

  • Iphone 4S wont connect to wifi since updating to iOS 6.0.1, can anyone help?

    HELP?! my iphone 4S wont let me turn my wifi on since updating to iOS 6.0.1?
    i have tried clearing history and cookie and data, re-booting my phone, resetting my network setting and still nothing? as i go to the wifi tab it wont even let me turn my wifi on, so i can not try changing it to auto
    also i have no signal as i am on 3 so i can not currently use my phone till the wifi is working again and this is driving me mad!
    can anyone help?

    This is a link to the Apple support page on this issue. Have you tried all of these steps?
    http://support.apple.com/kb/TS1559?viewlocale=en_US&locale=en_US
    Not sure what you mean that you have no signal but are on 3. What are you trying to say?

  • How can i connect to a wifi network with no internet connection​?

    I used to be able to connect my Z10 to a wifi network even when the network had no Internet connectivity when i got my phone in Feb. 2013 (10.0) However ever since the 10.1 update this has stopped working. I cannot connect to my wifi network when there is no Internet connection. I cannot play videos / music from my phone to my tv/music system or connect to my laptop. However my laptop and tv communicate just fine through the same network.
    Can anyone recommend anything for this?

    nikhildhoot wrote:
    I used to be able to connect my Z10 to a wifi network even when the network had no Internet connectivity when i got my phone in Feb. 2013 (10.0) However ever since the 10.1 update this has stopped working. I cannot connect to my wifi network when there is no Internet connection. I cannot play videos / music from my phone to my tv/music system or connect to my laptop. However my laptop and tv communicate just fine through the same network.
    Can anyone recommend anything for this?
    Your saved wifi networks should connect automatically whether internet is available or not, you may receive a notification "there appears to be no internet connection".
    Update to 10.2, if not available from your carrier then use Sachesi (see other threads).

Maybe you are looking for

  • Weird Blackout Notification issue

    Okay this is an odd one. I've got a windows host that I bounce the agent nightly (otherwise I leak myself out of memory) I do so programatically via a scheduled task. C:\grid_control\bin\emctl start blackout WebSiteBlackout webfocus & C:\grid_control

  • Selecting from bseg

    Abap Gurus, I am fetching belnr dmbtr buzei hkont from bseg for all entries from one table say 'TAB' where hkont = TAB-hkont and koart = 'S'. but in in the code inspector check it;s showing error The message is "Large table BSEG: No field of a table

  • HOw to correct 'error 15' message in Google Chrome

    My Google Chrome got weird. First the iGoogle page would not appear, a few hours later it was fine but no apps would open. Instead an 'error 15' message appeared. The email appeared a day later but no maps or search option. Then the mail went away bu

  • Exact weight of RAW material

    Hello, our scenerio is QM is activated for raw material inspection. Procedure is 1) Raw material(in stone form) came in truck. 2) in gate it is weight(Gross) is taken. 3) it is quility checked. if it is clear, truck is unloaded. 4) after unloading tr

  • Menus do not appear (via menubar, bookmark toolbar or right-clicking)

    I just noticed the other day that my menus are no longer appearing in Firefox. I can see the File, Edit, etc. menu bar, but clicking on the word File does nothing. Pressing Alt+F also does nothing. Right-clicking in a web page doesn't show the usual