Cannot connect to one domain via wireless
All of a sudden I cannot connect to my COX pop email account with my Macbook via my wireless router only, either by any email client or web access. Ethernet into the same router is ok. My Powerbook G4 is fine or my Dell PC notebook is fine either connection. I've also tried a neighbors wireless connection with the same result. So far any other of my pop 3 connections are ok. This has seemed to happen after upgrading to 10.5.1. Any ideas out there??
In that case you should try to download and upgrtade the firmware for the router.
This link is where you can download the firmware for the router
Click Here
And please click on this link on how to upgrade the firmware for the router
Click Here
Many thanks,
Akira893
wE dOnt gEt mAd! wE gEt evEn!
^_^
Similar Messages
-
Afp sharing bug with static IP ? cannot connect to shared folder via wireless router
Does anyone ever try this ?
i got 2 macs (imac snow leopard 6.6 and macbookpro leopard 10.5.8). connect to a wireless router using UTP cable and set using static ip , connection is ok, ping is ok, ftp between two mac is ok, browse the internet is ok. But i got on problem , i can't connect to shared folder. Error : 'connection failed' . i can see the other mac's icon on the shared section in finder, but i can't connect to it. The problem is fixed if --> The only way i can connect to shared folder is if i changed the ip from static to dhcp. Or if i want to keep my static ip, i have to connect mac to mac (using crosscable or airport) without the router , then the sharing folder will work fine. Anyone got similar problem? The problem only happen while sharing using afp and smb method. I have no problem with ftp, ftp sharing is working perfectly in any situation above.
My conclussion : afp sharing is having problem when apply with static IP and connected to router (or wireless router only ??) is this an afp bug on snow ?
Any idea ?
ThanxI did pay the 12 dollars, but I think the program remembers with the free one. If you didn't ever have to do port forwarding in the past, then you likely won't have to do it again. I couldn't get modern warfare to play properly without it. But your situation might be different.
If you had it in the DMZ, then that is a work around to doing port forwarding, so that will still work for you as it did before, and if you reset it properly, then yes you will have to put the ps3 back in the dmz.
just keep in mind if you changed your WiFI SSID or Password, it will reset to the default, and the default is found on your sticker that is on your router. -
Why can't I connect to my 3520 via wireless?
I have a HP Deskjet 3520, and I am running on Windows 7/64 bit.
I have been able to setup my printer through the USB, and I have been able to get my printer connected to the same network, and have setup e-print even. However, I cannot connect to my printer via the wireless, and my iphone cannot detect it through the e-print app.
I have tried turning odf firewalls, re-installing, turning of every part of the chain (ie laptop, printer, router...)
I even tried to connect through my MacBook, and still, I can only "see" it through the USB, even though the printer has an IP address and is able to receive documents through e-print.
Is this a known issue?Printer does not maintain wireless connection.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
Hi, It's a newly bought printer. I am unable to connect to the printer via Wireless Direct from Windows 8.1 64bit laptop. I have enabled the Wireless Direct with security on the Printer. Connected to the Printer SSID from my laptop wifi. Created the new printer from Driver software. It discovers the printer with it's name,IP etc; Upon selecting the printer and click on 'Next' button on the screen, results in a 5 min search process and finally displays that it could not connect. I have tried pinging the printer and it's able to pingf the IP of the printer successfully. I have even tried disabling the Norton antivirus, but result is the same. regards,sathwik
-
Hello,
I am trying to connect to external domain via UPS Account having "Replicate Directory changes" permission on external domain while creating sync connection in UPSA.
I have checked below URLS :
http://social.technet.microsoft.com/Forums/en-US/1912bf88-8fec-4b5d-9d1e-a42db8318e33/ldap-server-is-unavailable-sharepoint-2010-user-synchronization?forum=sharepointadminprevious
http://social.technet.microsoft.com/Forums/en-US/6525d3aa-9197-42a2-aea0-190b84ac8356/the-ldap-server-is-unavailable?forum=sharepointadminprevious
And looks like its network connectivity issue - and hence I have verified that port 389 is open by infra team.
Note : I am able to connect to local AD , does it make sense that port is not open for external domain ?
Can anyone please let me know what can be the issue ?
Your help will be highly appreciated as I am struggling to fix this issue since quite long time but no luck yet.
Thank you in advance.
Kind regards,
Dipti ChhatrapatiHi Dipti,
If you have Two-Way trust relationship then not sure if you have tried below:
Create a folder on the SharePoint server
Go to Folder properties - Security tab
Try adding user of the external domain on the folder
Please let us know if you are able to add the user or not. If you are able to add then it means that the connection and trust is proper and you should be able to create sync connection in UPA without any issues or else there is some issue with the connectivity
or the trust which is configured.
Please also make sure that you have given permissions to sync account as per below TechNet:
http://technet.microsoft.com/en-us/library/hh296982(v=office.15).aspx
Replicate Directory changes permissions are also required on cn=configuration container, below are the steps:
Grant Replicate Directory Changes permission on the cn=configuration container
Use this procedure to grant Replicate Directory Changes permission on the cn=configuration container to an account.
To grant Replicate Directory Changes permission on the cn=configuration container
On the domain controller, click Start, click Run, type adsiedit.msc, and then click OK.
If the Configuration node is not already present, do the following:
In the navigation pane, click ADSI Edit.
On the Action menu, click Connect to.
In the Connection Point area of the Connection Settings dialog box, click Select
a well know Naming Context, select Configuration from the drop-down list, and then click OK.
Expand the Configuration node, right-click the CN=Configuration... node, and then click Properties.
In the Properties dialog box, click the Security tab.
In the Group or user names section, click Add.
Type the name of the synchronization account, and then click OK.
In the Group or user names section, select the synchronization account.
In the Permissions section, select the Allow check box next to the Replicating
Directory Changes (Replicate Directory Changes on Windows Server 2003) permission, and then click OK.
Kind regards,
Bhavik K Jain
Please ensure that you mark a question as Answered once you receive a satisfactory response. -
Cannot connect to Mavericks server via AFP
Yesterday we had our server rebuilt. I have added a couple of users and a group with read/write access.
I can only connect to volumes via SMB://10.XXX.XXX.XX
When I try AFP://10.XXX.XXX.XX
I get the following error:
‘There was a problem connecting to the
server "10.108.172.134".
Check the server name or IP address, and then try
again. If you contintJe to have problems. contact your
system administrator.'
With SMB connection I am getting errors trying to copy files to the server.
The error is:
‘The Finder can’t complete the operation because some data in “e.g File” can’t be read or written.
(Error code -36)’
Any ideas guys?
I can’t get hold of our IT guy today.
Mac Pro 2 x 2.8 GHz Quad-Core Intel Xeon
OSX 10.9.5
Server 3.2.2Hi Team,
I am facing the same issue and I am using Oracle system user credentials to connect Oracle server and I have also installed extension pack for the SQL Server instance which i am using for migration. Still I am getting the following error in last step (Migrate
data).
Cannot connect to Oracle server via SQL Server tester extensions.
Oracle
10.2.0.4 verion
SQL Server 2012 SP1
SSMA 6.0
Please help me if you have gone through the same problem.
Thanks,
Vijaysqldb -
Cannot connect to SGD server via proxy
Hello
We have a recently installed SGD server running.
Some clients have been setup today with accounts to access it but none of them can get on at the moment. The error message presented is as follows:
Cannot connect to the server sgd.ourdomain.co.uk:443
The HTTP proxy "NTLM" at devicename:8080 failed to connect to the server sgd.ourdomain.co.uk:443
The following response was returned:
HTTP/1.1 403 Forbidden
Clearly there's a proxy/firewall getting in the way.
Client has tried to connect from a network that is behind a different firewall and has been sucessful.
I'm hoping to get further details on the proxy/firewall setup but this could take a while.
Has anyone encountered this previously and if so, can any solutions be suggested.
Thanks,
RobHi Team,
I am facing the same issue and I am using Oracle system user credentials to connect Oracle server and I have also installed extension pack for the SQL Server instance which i am using for migration. Still I am getting the following error in last step (Migrate
data).
Cannot connect to Oracle server via SQL Server tester extensions.
Oracle
10.2.0.4 verion
SQL Server 2012 SP1
SSMA 6.0
Please help me if you have gone through the same problem.
Thanks,
Vijaysqldb -
Connecting to Windows Computer via wireless network (Password issue)
I have a wireless network set up at my house, and we all can see each other's shared computers, and the windows machines can connect to each other without a problem.. but my Mac cannot connect to them, but they can connect to me. When I goto "Connect to Server" it asks me for a username and password for the windows machine.. I don't know what to do from here!!! Please help, thanks a bunch
In your Sharing panel, did you go into "Options" and check the box for sharing via SMB?
Then from XP you should be able to reach the Mac via //(ip# or DNS name)/
and you should see the available shares. -
HT1725 I cannot connect to itunes store via iphone4
suddenly my iPhone4 says: Cannot connect to itunes store.
How do i solve this???I was having the same problems after downloading 10.4.1 IStore would only download half way then nothing attempted reinstall no goood checked the Diagnostics with IPad connected, indicated no errors. more than a few hours browsing possible solutions. Found one stating 'Remove all Itunes connected software, i.e. Bonjour, ITunes, Safari etc from PC via the Uninstall Safely Feature and ReInstall. Hey Presto it worked now no issues.
Good Luck. I am using Windows 7.
That's my problem exactly, but I can't find the: ''Uninstall Safely Feature and ReInstall''. Where is that??
Thank You -
Connecting MacBook to printer via wireless network
I have a wireless network via cable modem with some PCs attached and a printer but am having trouble connecting my new MacBook to the HP LaserJet 2100 printer via wireless. I do not have airport express and not sure I need it to have the MacBook print to this printer. Please advise.
Hi topgunner,
How is the printer connected? Are you trying to share it via a PC through wireless? Or is it connected directly to a router/hub that is enabled for printer sharing? -
Connect to PC Companion via Wireless
Hi everyone, I have a SE XPERIA X10. I don't use PC Companion often enough just because, whenever I want to connect to my pc, I need to get the micro USB to do that. PC Companion offers connection via wireless for only 4 phones (3 models). XPERIA Arc, Play and neo. Why won't they do that for all XPERIA phones? Not even for X10 (which was much more expensive that Arc!). They all do offer wireless connection and can't seem to find the reason they won't let you connect that way. Any suggestions? Do the guys at SE ever see these posts and questions? Do they ever answer?
I know you do and I hate it (having to disconnect the USB from my charger each time I wonna connect to my PC). I just wish they improve it at least with the possibilities the And.2.3 will have. Maybe they 'll add it up the
-
Connecting two EA6500 routers via wireless bridge
Hi, I want to know how can we bridge two EA6500 routers via wireless. I do not want to use the lan cable. Please help.
Thanks,
anandpThis setup is not possible. You can only cascade the routers via wired connection. The access points on these routers are mainly transmitters, they're not receivers so you can't associate them wirelessly. You can, however, get a wireless bridge to do the job. Check out the Dual Band N Entertainment Bridge WET610N and Wireless N Universal Media Connector WES610N.
-
Normally I have my IMac, I-Pad and Windows Laptop all working on my home network via wi-fi. This week I find that I cannot access the inetrnet on my IMac or I-pad via wi-fi but I can connect to the internet via wi-fi with my windows based laptop.
The airport diagnostics (reds/yellows) indcate that I am connected
I can access the internet if I plug my IMac into the router via an ethernet cable
I have restarted the IMac and the I-Pad, rebooted the router and created a new network. None of these changes has made a difference. Does anyone have any ideas please?You have not completed your profile so we cannot assist you. In your profile you will indicate critical information such as what version of OS X is installed on your computer and the computer's configuration. If you do not know how to complete your profile please click Profile Update
-
I cannot enable my wifi because it is grayed out. I some of the recommended actions that I could do mannually to turn the wifi on but I'm still having trouble connecting to the internet via Wifi. I am thinking that I have to add a VPN but I don't know exactly what that means. Any suggestions?
Read this. If it doesn't solve your problem, take it to an Apple Store (hardware problem)
-
Cannot connect to iTunes Store via iPad
When I am outside of my home wi-fi I cannot connect to the iTunes store via the App Store on my iPad. iPad software is current (updated this morning at home). Rebooted iPad. I can access the internet via Safari, get current email, run Netflix, etc. but cannot access iTunes store via the App Store. This issue happens whenever I use a public wi-fi (hotels, airports, etc.) rather than my home wi-fi. Any suggestions? Thanks!
Ok, I found a solution that worked for me when trying to connect to the iTunes store by tapping the "update" button in the "App Store" app on my iPad 2. Before the solution was implemented I'd always get the error message "cannot connect to iTunes store". Once the solution was implemented I now can connect to iTunes using the "update" button in the "App Store" app and I get the normal message "All apps are up to date". The solution is this: go into Settings, then General, then scroll to the bottom where it says Date and Time. Tap Date and Time and then turn OFF Set Automatically. When you do that a new option will be added that says Set Date and Time. Tap it. You'll now get a drop down feature. Set the Date AHEAD 2 YEARS. The Time you can leave alone.
Once you do that you might get a bunch of reminders and messages that your apps and stuff haven't been updated in two years. Click cancel or close on each of those messages or reminders. Now go back into Settings, General, Date and Time, and turn Set Automatically back to ON. Reboot your iPad. Open the App Store app again and go to the Update button. It might ask you to log back in to your iTunes account. It should now work. If not, close the App Store app completely and open again and try the update button. Hope this helps.
Maybe you are looking for
-
Difference amount in sales order and billing document (For one line item)
Hi Experts, User created sales order with 3 line items and billing document. but problem is that there is difference in value of sale order and billing only for line item 10. The remaining items values are same in sales order & billing doc.if I check
-
How to get rid of pesky "forms" messages?
Every day I handle PDFs from many clients. We convert magazines to digital Web versions. They send us the same type of PDFs they output for their printers. With one new client, I'm having a distracting problem. Each time I open his PDFs in Acrobat, I
-
When I turn on Photo Stream in my iPhoto it crashes. Everything else works with the Cloud / my iPhone / my MacBook Pro except iPhoto. Do I just wait for Apple to send out updates to eliminate this problem? This problem started when I connected to t
-
When the cookie preference is set to "ask every time" the default button (highlighted & selected when I hit return or enter) is "allow." Can I change the default button to "allow for session" so I don't have to use the mouse to select it?
-
FCP 10.7 crashes (the whole Macbook Pro) when titles are added
I have a very frustrating problem with FCP. Am on Snow Leopard 10.6.8. 8GB RAM. Was running 10.0.6 but have just upgraded to 10.0.7 - problem persists. I have one video with titles included in it, put together before Nov 28th, that plays and Share