Cannot connect to OS X Server via ARD after 10.6.4 Update

Hi there
Just updated my server from 10.6.3 to 10.6.4. Everything is still fine - except the fact that my Remote Management seems to be dead now...
"Remote Management" is definitely on. But on my Client(s), the server is not recognized and its status is either "ARD not activated" or not even visible (just the black icon with the server's IP; but without its hostname). But DNS is fine...
I can use Server Admin and SSH as usual. Even restarted the agent with "sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -restart -agent" which reported back that it has restarted.
But still no signs of my server in ARD. So it seems that VNC crashed on the server?!
Did not find any hints in the log files. Firewall is off by the way.
All the best and thanks
Goofy

I started having this exact same problem on my sever with the update to 10.6.4 Server, in that ARD access did not work at all. I'd get a "connection failed" message every time I tried to connect.
Kickstart did not solve the problem.
Finally, I gave up and decided to wait for 10.6.5 Server in hopes that the problem would go away after THAT update.
I have now updated to 10.6.5 Server, and no dice.
ARD still doesn't work.
Kickstart still doesn't help.
Any advice?
Thanks,
Rusty

Similar Messages

I am unable to connect to my RackSpace Windows Server via ARD. I have added a computer entering the ip address, username, and password but I can't establish a connection. I am missing a setting or to step that is different in ARD?

I am unable to connect to my RackSpace Windows Server via ARD. I have added a computer entering the ip address, username, and password but I can't establish a connection. I am missing a setting or to step that is different in ARD?

ARD only works with Windows computers if the Windows computer is running VNC server software. Even then it can only control and observe. Do you have this installed?

"System cannot connect to the application server" (Admin Client only)

Hello Experts,
I have a strange issue: I am getting "system cannot connect to the application server" when I am trying to launch BPC Admin.
I successfully connect to the same application server with Excel client on the same PC.
I am able to connect via Admin from another PC.
The installation in question is a new installation. The only difference between my PC and a troubled one is IE7 vs. IE8 - IE8 is the one giving issues.
BPC site is in Local Intranet zone. Windows Authentication is enabled. What am I missing? Local Policy? IE8 settings? Folder permissions (I'm local admin on both PCs)?
It's BPC 7.5 SP05.
Thanks in advance,
Akim
P.S. OS: Windows Server 2003 SP2 32-bit (Citrix box).
Edited by: Akim Zubarchuk on Mar 30, 2011 12:28 AM

Hi Akim,
Check client diagnostic for admin client can provide good information.
Any way if you are able to connect with excel client not with admin client I will say:
1. Check the rights of user used to connect with admin console
2. Check proxy settings
3. Disable antivorus or firewall into that computer.
4. Make sure the installation of admin client was correct done.
In my opinion it is a big probability to be point 3 or 4.
Regards
Sorin Radulescu

Failure - Cannot connect to Microsoft SQL Server on localhost

Hi!
I have a sqlserver installation on localhost and I want to connect with sqldeveloper.
I fill connection name, username, password, hostname: localhost port: 1433
and then click on retrieve database.
I get the following error message: "Status: Failure - Cannot connect to Microsoft
SQL Server on localhost"
I don't know the reason. I can use another connection to another ms sql server
and it's no problem, but can't connect to localhost.
I have special signs in my computername, for example a "-". Is this the problem?
How can I solve it?
Thank you
Andreas

I am able to successfully connect to my local SQLEXPRESS instance using the following settings:
Hostname: localhost
Port: 1433/DBName;instance=SQLEXPRESS
Even though I use this to connect, I cannot open a tcp connection to port 1433 via telnet. I believe this goes hand in hand with specifying the instance. As I understand it, there are two ways to specify the port, one is directly, the other is through a named instance (another port is used as a service to look up the correct port). SQL Server 2005 appears to prefer named instances instead of specific ports. When "instance" is specified, the port can actually be any number, the driver apparently ignores it.
The Retrieve database (list) appears to be only for informational purposes. I have to specify the database in the Port field (DBName) regardless of what I have selected in this list.
Hope this helps!
PS: Retrieve database will give that error until instance is specified in my case.
Edited by: flszen on Feb 4, 2009 1:29 PM

Fatal Error Adobe cannot connect to a DDE server.

Just started getting this error message "Fatal Error Adobe cannot connect to a DDE server." Can save files to PDF but then cannot open them. Using current Adobe 11 with Windows 8, using Norton Security Suite. Sometimes it will say Fatal error Adobe and at other times it will say Acrobat.

Hi snowbird1,
Thank You for posting on the forums. The probable cause of the error is, multiple processes of Acrobat/Reader running in the background.
Kindly follow the steps mentioned below and check, if it helps.
1) Press CTRL+ALT+DEL together
2) Go to the Task Manager
3) Go to Processes in the Task Manager and kill al the processes related to Acrobat/Reader.
4) Launch Reader/Acrobat (It should launch without an error).
To further isolate the issue you might want to run Acrobat/Reader in an environment where no other services are running.
This can be achieved via "MSCONFIG"
1) Click on start type run
2) Type MSCONFIG in the run prompt
3) Go to services and click on hide all Microsoft services
4) Click disable all
5) Go to the startup in configuration window and disable all startup items
6) Restart your system
7) Launch Acrobat/Reader
If, it is launched without an error, a service on your system is conflicting with Acrobat/Reader.
Thanks,
Vikrantt Singh

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom?

Acrobat cannot connect to the Review Server

I've been invited to a shared review on Acrobat.com. When I download and open the PDF from the Acrobat.com invitation email, I get this error message:
Acrobat cannot connect to the Review Server: Adobe online services.
If I click the "Check for new comments" button in the upper right corner, I get this message:
Could not get new comments. Acrobat did not get a response from the server. Try again later or contact your system administrator.
I can't see other reviewers' comments and can't post my own. I'm definitely online and connected, so not sure what's happening, but have had this error for several weeks now.
My system:
Acrobat XI Pro
MacBook Pro OS X 10.8.5
Safari browser 6.0.5
My Creative Cloud desktop app says Acrobat XI is up to date. I also have Photoshop CC installed.
I've tried logging into Acrobat.com with my Adobe ID before and after opening the PDF, nothing works. Also tried clearing my cache. Is there something in my Acrobat preferences that could be the issue?
Please help.
Thanks,
Mark

I am having a similar problem. The review was set up as a test. All our PC colleagues can access as normal. Our 2 Mac machines are not having luck.
Acrobat 10.1.8 Pro
Macbookpro OSX 10.8.5
Error: Could not get new comments. Acrobat did not get a response from the server. Try again later or contact your system administrator.
Could not get new comments. Acrobat did not get a response from the server. Try again later or contact your system administrator.
I'm guessing maybe a proxy issue?... what protocol/port is acrobat tryng to use?
(I tried process above with no luck)

Cannot connect to the report server

I try to submit a report using RWCLIENT (see below), but getting the error:
"REP-0178 Cannot connect to the report server 'rep_M2003-056DVM_ora10gas' "
If I use URL, the report runs fine.
Please advise.
Thanks,
Dmitri
C:\OraDev10g\BIN\rwclient userid=user/password@database module=txr1020 batch=yes paramform=no DESTYPE=LOCALFILE desformat=pdf desname="M:\txr1020.pdf" AUTHID=ias_admin/iasadmin1 server=repser

We have Reports 10.1.2.
RWCLIENT (10g iDS) is installed on different machine.
On OracleAS I have started the Naming Service: namingservice.bat 14021
On client I updated the rwnetwork.conf with OracleAS hostname and 14021.
What is wrong? Maybe I need to start Naming Service using OPMN for report server to register.
Thanks.

ICloud says it cannot connect me to the server

I have lost the phone numbers in my contacts on my iphone 4S. I figured that using iCloud from my PC I would be able to recover them. When I try to sign in to iCloud from my PC, I get a message saying that it cannot connect me to the server. I can tell that my iCloud password on my phone is not correct but when I correct it, it reverts back to the old one. I can't figure out how to save it,and its the only thing I can see that might be preventing me access. I downloaded the latest version of iOS to see if that would help and it didn't. Any ideas?

I'm getting the same thing. I JUST bought mine too...
I was immediately sold once I played with it at the Apple Store but they forget to warn you there's a lot of setting up.
I'm tempted to go to an Apple store and tell them, I just wanna walk into my local coffee shop and be able to use their free wifi... what are the steps I need to take?
With my laptop all I have to do is turn on the airport and then I'm on the internet... with the iPod Touch seems like you have to go through **** and back - I started doing research on troubleshooting with iPod Touch, even called a person at the Apple store and then I see all these posts of routers, IP addresses, DCHP, reset settings and it's REALLY REALLY confusing for someone who's not that computer savvy - I thought Apple was user friendly. I really hope it's not that hard.
If you find results, please let me know. I've gone cross eyed from reading too much about this somewhat simple yet extremely complicated device.

The WSUS administration console was unable to connect to the WSUS Server via the remote API. (Server 2k8)

I have installed a new server for WSUS on Server 2k8, This is a stand alone server on Internet No client system is connected on this server as I have to copy these updates to my LAN which never connects to internet. (Previously I was using server 2k3. for
online & server 2008 on my LAN , now I have changed the server for Online)
Wsus has finished the synchronization & downloaded updates of around 67GB & its downloading more updates. The server shows me some updates are waiting to approved. but when I click the link for those updates I get following error message.
error code is as follows -
The WSUS administration console was unable to connect to the WSUS Server via the remote API.
Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
System.Net.WebException -- The operation has timed out
Source
System.Web.Services
Stack Trace:
   at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.ApiRemotingCompressionProxy.GetWebResponse(WebRequest webRequest)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.UpdateServices.Internal.ApiRemoting.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, Int32 publicationState)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
   at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
   at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
   at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates(ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)
   at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows()
I Have tried desabling the firewall,disabling the antivirus protection. Tried by changing the default rule Please Help.

Hi Sagar,
First, please check if the RAM is exhausted. When there is not enough RAM, this issue may occurs.
Please try to run iisreset on the WSUS server, then try to reconnect.
Also, please try to run the server cleanup wizard to remove the unused update.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

BPC 75M - Modify Application error "Cannot connect to the Reporting Server"

I have trouble with Modify Application, also in ApShell. Maybe you have a clue what it can be the problem.
Configuration: single server BPC 7.5M SP3, Windows Server 2008 SP2, SQL Server 2008 SP2
Installation user is a domain user.
No errors during installation, no error in Server Manager diagnostics.
But when I try to modify an Application from BPC Admin it gives an error for step "Make OLAP database and Journal/Audit reports. / Validate dimension formulas.".
In tblLogs I see the error message:
==============[System Error Tracing]============== [System Name] :
AdminServerHandler [Message Type] : ErrorMessage [Job Name] :
AdminApplicationHandler : ExecuteModIfyApplication [DateTime] :
10/19/2010 1:19:13 PM [UserId] : MYDOMAIN\MYUSER
[Exception] DetailMsg : {System.Exception: Cannot connect to the Reporting Server at
OSoft.Services.Application.AdminMainServer.AdminApplicationHandler.SetChangeDimensionForAudit(String strAppset, String strApp, String strUserID, Boolean blnIsChangedDimension, String& strErrMsg) at
OSoft.Services.Application.AdminMainServer.AdminApplicationHandler.ExecuteModIfyApplication(String strAppSet, String strApplicationName, String strApplicationDescription, String strSourceApplicationType, String
strNewApplicationType, String strRateApplicationName, String
strOwnerShipApplicationName, String strCurrencyConversionsCalculation,
String strCalculation, String strIntercompanyBookings, String
strUSEliminations, String strOpeningBalance, String strValidations,
String strIntercompanyEliminations, DataTable dtDimensionList, Boolean
bReassignSQLIndex, Boolean bProcessApplication, Boolean bDeleteFact,
String strChangeAppType, String strUserID, String strReportBackID)}
==============[System Error Tracing End ]==============
Edited by: Alexandru Berindei on Oct 26, 2010 7:57 PM
Edited by: Alexandru Berindei on Oct 26, 2010 7:58 PM

There were problems accessing the web page   HTTP://server/reports
Error message:   "Reporting services 2008 user does not have required permissions"
It was possible to open the page HTTP://server/reports with local administrator user and I fixed this problem by performin following:
- add Content Manager right to bpc installation user
- disable UAC from Windows Control Panel > User Accounts
Still Modify Application gives the same "Cannot connect to Reporting Services".
I tried:
- check that BPC Installation User is part of Local Administrators
- reboot server
- reinstall BPC after disabling UAC
- reinstall everything except the Windows Server 2008
- I installed another computer with the same exact configuration but with a local BPC Installation User and it works.
Have anyone installed BPC 7.5M SP3 on single Windows Server 2008 SP2 , with SQL Server 2008 SP2 and with BPC Installation user a domain user?
Maybe you have an idea of what I should check next.
Thank you,
Alex

Cannot connect to the Administration server?

I just installed Hyperion 11.1.2 in Windows 2008, and I'm sure the essbase server is started because I can connect by MaxL, and I can see the Administration server service is started because I can see it in the service list. But When I want to login ADM, error messageL "Cannot connect to the Administration server", please advise?
Error: java.lang.UnsatisfiedLinkError: no environmentjni in java.library.path
java.lang.NoClassDefFoundError: com/essbase/eas/utils/Environment
Error detail:
2010-04-23T23:24:59.576-04:00] [EssbaseAdminServices0] [WARNING] [] [oracle.epm.essbase.eas] [tid: 11] [userId: <anonymous>] [ecid: 0000IWhqB6yDwWWFLzNM8A1BoaI7000000,0] [APP: EAS#11.1.2.0] java.library.path=E:\Oracle\Middleware\user_projects\domains\EPMSystem\bin;.;C:\Windows\system32;C:\Windows;E:\Oracle\Middleware\jrockit_160_14_R27.6.5-32\jre\bin;E:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\native;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;E:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\bin;E:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\bin;E:\Oracle\MIDDLE~1\JROCKI~1.5-3\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;E:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0;E:\Oracle\Middleware\EPMSystem11R1\common\CSS\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\SAP\bin;E:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\JRE\Sun\1.6.0\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;D:\app\serv_hyperion\product\11.2.0\client_1\bin;D:\app\serv_hyperion\product\11.2.0\dbhome_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Intel\DMIX;E:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Common;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Client;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Server;E:\Oracle\Middleware\ohs\bin;E:\Oracle\Middleware\ohs\opmn\bin;E:\Oracle\Middleware\ohs\opmn\lib;E:\Oracle\Middleware\ohs\perl\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin\SQR\Activator\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin\SQR\Viewer\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\lib;E:\OraHome_1\oracledq\tsq11r5s\Software;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\Wbem;D:\app\serv_hyperion\product\11.2.0\dbhome_1\BIN;D:\app\serv_hyperion\product\11.2.0\client_1\BIN;E:\Oracle\Middleware\EPMSystem11R1\BIN;E:\Oracle\Middleware\EPMSystem11R1\common\CSS\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin;E:\OraHome_1\oracledq\tsq11r5s\Software;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\Wbem;D:\app\serv_hyperion\product\11.2.0\dbhome_1\BIN;D:\app\serv_hyperion\product\11.2.0\client_1\BIN;E:\Oracle\Middleware\EPMSystem11R1\BIN;E:\Oracle\Middleware\EPMSystem11R1\common\CSS\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
[2010-04-23T23:24:59.576-04:00] [EssbaseAdminServices0] [ERROR] [ESSEAS-00100] [oracle.epm.essbase.eas] [tid: 11] [userId: <anonymous>] [ecid: 0000IWhqB6yDwWWFLzNM8A1BoaI7000000,0] [APP: EAS#11.1.2.0] Unknown error occurred. See below stack trace for details[[
java.lang.UnsatisfiedLinkError: no environmentjni in java.library.path
Edited by: user2571802 on May 8, 2010 2:01 PM
Edited by: user2571802 on May 8, 2010 6:52 PM

I too am getting the same error. When i click the validate 'Validate essbase connection' on the application wizard page, I get a blank page saying 'An errror occured'. I stop the planning service and restarted it from Start button. This time I got the error message
[ERROR] [HspCreateDatasource] - Servlet.service() for servlet HspCreateDatasourc
e threw exception <java.lang.UnsatisfiedLinkError: no HspEssbaseEnv in java.libr
ary.path>java.lang.UnsatisfiedLinkError: no HspEssbaseEnv in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseEnv.<clinit>(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseJniOlap.<clinit>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.TestEssConnection(Unknown Source)
at HspCreateDatasource.doCheckEssbaseConnection(Unknown Source)
at HspCreateDatasource.doHandle(Unknown Source)
at HspCreateDatasource.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF

Cannot connect to the reporting server error

Hi,
When trying to process an application, I get the error : "cannot connect to the reporting server".
We have the BPC application server on a machine and DB, SSAS and SSRS (SQL 2008) on another machine.
We don't have a named instance, we use the default one.
If I connect to http://%SQLServer%/reports, it works.
What could be the problem ?
Thank you in advance.

Hi,
we had got the same problem. In the end we:
- Installed RS on the same machine of BPC (Application Server) (please be careful to make a new db if you want to use the same DB Server)
- Configured correctly the server manager to point the new ReportServer
- Edited from SQL Server Management Console the tblAppSetInfo, in order to make the column of the ReportServer of all Application Sets to point to the new report server.
- (not sure was needed) rebooted and restarted all the services
- Tested it and it worked!
HTH
Daniele Tiles

No trusted certificate found (91);Cannot connect to the LDAP server

HI All,
I am trying to connect to LDAP server with the following code.
JSSESocketFactory fact = null;
private LDAPConnection conn = null;
String keystore = "C:\\j2sdk1.4.2_15\\jre\\lib\\security\\cacerts";
System.setProperty("javax.net.ssl.trustStore",keystore);
fact = new JSSESocketFactory(null);
conn = new LDAPConnection(fact);
int ldapVersion = 3;//LDAPConnection.LDAP_V3; //defualt values of LDAP settings
private int ldapPort = 636;
LDAPAttributeSet ldapAtrbSet;
String ldapHost;
String loginDN;
String loginDN_Password;
And it is gicving me error :
Error: netscape.ldap.LDAPException: SSL connection to 192.168.10.8:636, sun.security.validator.ValidatorException: No trusted certificate found (91); Cannot connect to the LDAP server
netscape.ldap.LDAPException: SSL connection to 192.168.10.8:636, sun.security.validator.ValidatorException: No trusted certificate found (91); Cannot connect to the LDAP server
     at netscape.ldap.factory.JSSESocketFactory.makeSocket(JSSESocketFactory.java:105)
     at netscape.ldap.LDAPConnSetupMgr.connectServer(LDAPConnSetupMgr.java:418)
     at netscape.ldap.LDAPConnSetupMgr.openSerial(LDAPConnSetupMgr.java:350)
     at netscape.ldap.LDAPConnSetupMgr.connect(LDAPConnSetupMgr.java:244)
     at netscape.ldap.LDAPConnSetupMgr.openConnection(LDAPConnSetupMgr.java:170)
     at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1042)
     at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:924)
     at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:768)
     at com.reflexis.LDAP.LdapTestSSL.createConnection(LdapTestSSL.java:522)
     at com.reflexis.LDAP.LdapTestSSL.checkLdap(LdapTestSSL.java:118)
     at com.reflexis.LDAP.LdapTestSSL.main(LdapTestSSL.java:52)
Unable to connect to LDAP server
I have imported atr certificate also by using command:
"keytool -import -alias jag -file c:\x225.cer -keystore c:\j
2sdk1.4.2_15\jre\lib\security\cacerts"
I am running my java code from eclipse. And do i have to set any thing in eclipse for certificate. I Have imported certificate from command prompt.
Can any one please help me.It is very important for me.
Please its very urgent.
THanks,
Ankush Patni

As previously said network is a possible cause.Other things could be time on filer is too far off time on DC.AD object for filer has been deleted or change by a Windows admin.If all users are experiencing a problem, you may need to rebind it to AD - run CIFS setup at command prompt

Error : Cannot connect to the LDAP server

I have exported a file called "test1.ldif"
and then import in a new Oracle ldap server using the command:
ldapadd -p 389 -D cn="directory manager" -w <password> -f test1.ldif
But there is error "Cannot connect to the LDAP server".
Actually, I'm migrating the ldap data from 1 machine to another, please advise. Thanks

Check your ldap port, by default it is 4032...
--Bill

Cannot connect to OS X Server via ARD after 10.6.4 Update

Similar Messages

Maybe you are looking for