Cannot connect to other users than administrator

Hi,
I am very new to windows server, in fact, I installed it on my PC yesterday.
I have set up remote control for my computer which works fine on the default "Administrator" account. However, when trying to connect another user (e.g. "TestUser"), I cannot connect to the computer.
I have tried to make the user administrator, adding the username to users whom can be controlled, but still only works on the "Administrator" account.
The error message I get: "Unable to connect to remote PC. Please verify that remote control is enabled, the remote PC is turned on and available on the network, and try again".
Therefore I tried manually logging in to the user, enabling remote control, connecting again, but still didn't work.
Any suggestions?

Hi,
Please go through below self support link,
Why can’t I connect using Remote Desktop Connection?
modify the settings according to the document.
Regards,
Manjunath Sullad

Similar Messages

Cant connect to other users' libraries

for some reason i cannot connect to other users on my college network, ive enabled sharing in itunes and all that jazz, and i see a bunch of users, but cannot connect to any of them am i missing something?

Hi,
Please go through below self support link,
Why can’t I connect using Remote Desktop Connection?
modify the settings according to the document.
Regards,
Manjunath Sullad

Windows cannot connect to the User Profile Service service

On startup error message 'Windows cannot connect to the User Profile Service service' appears and windows will not start. Windows starts in safe mode. No corrupted user profiles. No viruses detected. Cannot resolve the problem. Any ideas?

On startup error message 'Windows cannot connect to the User Profile Service service' appears and windows will not start. Windows starts in safe mode. No corrupted user profiles. No viruses detected. Cannot resolve the problem. Any ideas?

Cannot connect essbase sever using Essbase administration service console

Hi:
I installed Essbase 11.1.2.2 in my PC,
but I cannot connect essbase server with the administration servise console. but I try to connect with ESSCMD.exe, everything is OK.
could you pls help to advise how can I connect it ?

Did you add the essbase server in EAS?
If yes what is the message that you are getting while connecting to Essbase?
Regards
Celvin
http://www.orahyplabs.com
Please mark the answers as helpful/correct if applicable

Cannot connect to other computers over wireless on my AEBS N base-station

10.5.1
Cannot connect to other computers on network. Can connect to Airport disk, but not my desktop (iMac G5) or vice-versa (Macbook). Can see it on finder sidebar, but clicking on it just "connects" for hours, with no success. Finder-->connect to server does not work with IP or name.local. Tried rebooting, deleting kerberos, deleting .mac certificates, unplugging, prayer and animal sacrifice. No luck. Anyone have any suggestions? Firewalls are both turned off, BTMM turned off, airport on, both connected etc. Console logs are spitting out LOTS, I can post if necessary.

Hi Varick-
This may help: Mac OS X v10.5 Leopard Sharing
Luck-
-DaddyPaycheck

In SU56 cannot check the other users' auth. value after import packages

Dear All,
Our system is ECC5.00. I upgraded the SPs SAP_BASIS & SAP_ABA from 16 to 19. After that, I cannot check the other users' failed authorization value by the path "SU56->Authorization values->Different user/Authorization objects".
In the following popup, which named "Select User and Authorization Object", when I input the user name and press enter, the failed checked authorization object cannot be displayed automatically. But before the upgrading, I can get the failed object automatically.
Kindly help me about this issue please
Thanks & regards

Hello Jiajia,
Please check oss note:968915.
Regards
Ruchit

EWS API - Impersonating to update a calendar item created by any other user than a service account, raise an error "Access is denied. Check credentials and try again."

Hi,
I am new to using EWS managed APIs.
Following is the issue:
1. I am using a service account e.g. [email protected]. This user is a global administrator and also has ApplicationImpersonation role assigned. (Sign into Online Office 365 account -> Admin -> select "Exchange" tab- > select Permissions
on the left panel -> create an impersonation role -> assign ApplicationImpersonation in Roles: and [email protected] in Members: -> Click on save)
2. Create a calendar item by other user for e.g. [email protected], and invite an attendee - [email protected].
3. In a c# program, I connect to EWS service using a service account - [email protected], fetch its calendar events. If organizer of an event is some other user - [email protected] then
I use impersonation in the following way to update the calendar event/item properties- subject, body text etc.
        private static void Impersonate(string organizer)
            string impersonatedUserSMTPAddress = organizer;
            ImpersonatedUserId impersonatedUserId =
                new ImpersonatedUserId(ConnectingIdType.SmtpAddress, impersonatedUserSMTPAddress);
            service.ImpersonatedUserId = impersonatedUserId;
4. It was working fine till yesterday afternoon. Suddenly, it started throwing an exception "Access is denied. Check credentials and try again." Whenever I try to
update that event.
       private static void FindAndUpdate(ExchangeService service)
            CalendarView cv = new CalendarView(DateTime.Now, DateTime.Now.AddDays(30));
            cv.MaxItemsReturned = 25;
            try
                FindItemsResults<Item> masterResults = service.FindItems(WellKnownFolderName.Calendar, cv);
                foreach (Appointment item in masterResults.Items)
                    if (item is Appointment)
                        Appointment masterItem = item as Appointment;
                        if (!masterRecurEventIDs.Contains(masterItem.ICalUid.ToString()))
                            masterItem.Load();
                            if (!masterItem.Subject.Contains(" (Updated content)"))
                                //impersonate organizer to update and save for further use
                                Impersonate(masterItem.Organizer.Address.ToString());
                                // Update the subject and body
                                masterItem.Subject = masterItem.Subject + " (Updated content)";
                                string currentBodyType = masterItem.Body.BodyType.ToString();
                                masterItem.Body = masterItem.Body.Text + "\nUpdated Body Info:
xxxxxxxxxxxx";
                                // This results in an UpdateItem operation call to EWS.
                                masterItem.Update(ConflictResolutionMode.AutoResolve);
                                // Send updated notification to organizer of an appointment
                                CreateAndSendEmail(masterItem.Organizer.Address.ToString(), masterItem.Subject);
                                masterRecurEventIDs.Add(masterItem.ICalUid.ToString());
                            else
                                Console.WriteLine("Event is already updated. No need to update again.:\r\n");
                                Console.WriteLine("Subject: " + masterItem.Subject);
                                Console.WriteLine("Description: " + masterItem.Body.Text);
            catch (Exception ex)
                Console.WriteLine("Error: " + ex.Message);
5. What could be an issue here? Initially I thought may be its a throttling policy which is stopping same user after making certain API call limits for the day, but I am still seeing this issue today.
Any help is appreciated.
Thanks

Your logic doesn't sound correct here eg
2. Create a calendar item by other user for e.g. [email protected], and invite an attendee - [email protected]
3. In a c# program, I connect to EWS service using a service account - [email protected], fetch its calendar events. If organizer of an event is some other user - [email protected] then
I use impersonation in the following way to update the calendar event/item properties- subject, body text etc.
When your connecting to [email protected] mailbox the only user that can make changes to items within
abccalendar is abc (or ABC's delegates). If your impersonating the Organizer of the appointment pqr that wouldn't work unless the organizer had rights to abc's calendar. If you want to make updates to a calendar
appointment like that you should connect to the Organizers mailbox first update the original, send updates and then accept the updates.
When you impersonate your impersonating the security context of the Mailbox your impersonating so its the same a logging on as that user in OWA or Outlook.
Cheers
Glen

Cannot Connect to other computers on my router

I have a u.s.robotics sureconnect 9106 (adsl modem and router - the same as
9105) and wanted to hang another pc with xp pro to my xp pro machine. So
i connect the two via ethernet cable to the router, but i am able
to ping the other machine and to use ftp but neither of the two can see
the other in windows xp pro
the same with a osx machine witch i connect for checking itunes or sharefolders
I also try my xbox with xbmc for sharing and streaming my itunes songs
but it doesn't work at all, even after i open the two ports asked by
itunes - i also deactivated outpost but that neither helped - the
strange thing is that in the outpost/system/lan-settings outpost can't
even see the other machine
I can also ping it and ftp, but nothing more
when i try to connect then outpost ask me if i want to allow it and
afterwards when i try to close itunes then it says that another user
is in my library but the xbmc says that it couldn't connect...
what have i forgotten?
I not read here that the port 5353 should be udp and i have only give the tcp port free but after changing to udp itunes not even told me on the exit that another user has access to my database
ah well i have on my router a virtual server with the same ip as my
computer (192.168.1 ist the modem 2 ist my computer and the virtual
server and 3 is the other computer) and there i set the port holes for
the nat service (itunes etc) BUT i think because of that i have
in the network connections not even a internet-gateway but only
the ethernet connection
I installed xp pro new, but then the gateway only appears for some
seconds and then disappear. But lately for a while it appears but after
some time it disappears - maybe its because i try this time not to give
my machine a fix ip and then its possible that the gateway appears when
I have another ip than the virtual server on my router, and that then
outpost also recognize the other computer?
any idea what i did wrong, or i have forgotten, i really haven't a clue
what to to and i never haven't heard that when you have a virtual
server (nat) then its not possible not to connect to others
computers...
thanks for your patience
adrian

Bought my iMac in February and worked fine up until about a month ago. I have assigned a manual IP address outside the range of other devices in my network (e.g. 192.168.0.10) and this seems to do the trick (most of the time). The problem I had was the self assigned IP address wasn't in the usual range for my router so while I was connected to Airport and the internet I couldn't view any webpages. Had to do the same thing to my Macbook which I purchased about a month ago.
The strange and very frustrating thing is sometimes it doesn't recognise my preferred network but then when it asks me to join a network, my network appears! When I try to connect and confirm password, connection times out. Whats that all about?
The bottom line is the assigned IP solution doesn't always work but it seems a combination of issues rather than one. None of the other devices on my network (ReadyNas Duo, Xbox 360, PS3, Wii etc) have issue connecting to the router using DHCP but for some reason Airport has trouble dealing with this and assigning a correct IP or can't find the network all together.
Only thing I can think is its some Airport update that has caused these intermittent issues and realy hope they fix it soon.
So no update but just wanted to share my experiences in what seems a very wide scale issue...

Cannot connect to other computers on my wireless network

Since I upgraded to Mac OS X v10.7 Lion I cannot connect to my iMac or MacBook as a Registered User. I keep getting "Connection Failed" when I try to connect.

If you are getting the error message that the server won't allow any more users to connect, and to try again later, this seems to be a problem with AFP sharing in Lion.
The workaround for this so far is to go to System Preferences > Sharing > File Sharing and click on Options... On that window, turn OFF "Share files and folders using AFP" and turn ON "Share files and folders using SMB (Windows)" Click Done to go back to the sharing window and you should see a green dot followed by "Windows Sharing: On"
Give that a try.

Cannot connect to other computers on network

We have a small office network with 7 macs on it. 5 wired 2 laptops with Airport Extreme.
We have an 8 port switch where the 5 desktops and the airport connect. When I am on a laptop I cannot connect to any of the desktops. It does not even see them (and same with desktop to laptop) What do I need to do to share these two on the airport

Configure the AirPort Extreme base station (AEBS) so that it the option to distribute IP addresses is DISABLED. That will place the wireless and wired computers on the same subnet.

Cannot login to other user accounts via Terminal

Hi. I'm a Unix newb. I am reading Mac OS X Support Essentials and I'm a little stuck on the command line chapter. There is a command that just does not work for me.
I am an Administrator using an Administrator account. I am using bash Terminal and trying to login to another user's account (also mine) on the same Mac using +sudo username+. The password prompt appears and I type the user's password. It throws back "Sorry, try again." I'm not sure if I am supposed to use the user's password or my admin password so I also tried my password. The response is
sudo: username: command not found
Is there a permission problem or something? I logged into the other user accounts in the GUI. I have the right passwords.
Thanks in advance.
Gary

Note that this topic would be better posted over on the [Unix forum|http://discussions.apple.com/forum.jspa?forumID=735]. I'll ask the moderators to move it over there, so don't be surprised if it moves.
That said, sudo stands for "super user do", and is used to identify some action to take as another user or as root. A username is not an action, so "sudo username" is not a valid command. If you have a particular command that you wish to execute with root permissions, you do something like this:
sudo ls -al /Users/anotheruser/Documents/
This lets you view the contents of another user's Documents folder. You can also execute commands as a specific user (though I've never tried this) using something like:
sudo -u anotheruser ls -al /Users/anotheruser/Documents/
I'm not sure if this answers your question or not...

Connect as... no longer works. Cannot connect to other computers on my home network.

I have a home network and it's been unchanged for years. Never had any issue with connecting to other computers, all of which are Macs running OS X. Now, if I click Connect As, nothing happens. Double-clicking the other computer in the Finder's sidebar or using Go To Server, etc. yields nothing. Even odder; the other machines no longer see me at all. No one has any Firewall on. File sharing is on for all machines. We're all on the same subnet and the same network, yet every other machine can connect to one another but not mine. Thoughts? Restarting has not helped. Thanks.

If you are getting the error message that the server won't allow any more users to connect, and to try again later, this seems to be a problem with AFP sharing in Lion.
The workaround for this so far is to go to System Preferences > Sharing > File Sharing and click on Options... On that window, turn OFF "Share files and folders using AFP" and turn ON "Share files and folders using SMB (Windows)" Click Done to go back to the sharing window and you should see a green dot followed by "Windows Sharing: On"
Give that a try.

Cannot connect to other pc on network

Hi.
I have a laptop and so does my girlfrind. When we are connected to the network, it's not possible to access the other laptop. We can see the other laptop under "my computer", but when clicking at the icon, nothing happens
We are using a WRVS4400N. How de we connect each others laptop? Are there any setings we should use?
I also has a wired desktop connected. It's not possible to connect to that one either, even it shows under "my computer"
Windows Vista is used on all machines.
'cmnielsen

Hi.
I
have a laptop and so does my girlfrind. When we are connected to the
network, it's not possible to access the other laptop. We can see the
other laptop under "my computer", but when clicking at the icon,
nothing happens
We are using a WRVS4400N. How de we connect each others laptop? Are there any setings we should use?
I also has a wired desktop connected. It's not possible to connect to that one either, even it shows under "my computer"
Windows Vista is used on all machines.
'cmnielsen
Hi,
How are you connecting other laptop are u try to share some folders from other laptop or tranfering some files.
Hope to Help !!
Ganesh.H

Cannot connect to other computers on network. HELP!

Using a G-5 dual 2.0 with 10.4.10 and I am having issues with networking and connecting to other computers on my network. This is an intermittent problem. When I try to connect <go> <connect to server><browse> the computers on the network do not show up(in the network window) all the time. Sometimes they will if I restart and sometimes not. Why is this happening? I have 4 other machines and they are all fine. I can connect to if but not from it.
TIA
mk

FYI - this is the Internet and Networking discussions area for the iPhone.
Better for you to post your question here instead.
http://discussions.apple.com/forum.jspa?forumID=755

Can't connect to other users

Hi.
I am having trouble seeing other users that I know are on-line in the buddy window. Their user name is greyed out and I can't see when they go on-line.
They are in my address book and they have .mac.com accounts.
Do I have some issues with setting up sharing?
-pc

I believe this is the fix. The address book is where I have entered the contact i want to chat with, but the adderss book entry is not enough: you have to update the entry after adding it in iChat.
Once I had done that, the user is found, no problem and it works.
-pc

Cannot connect to other users than administrator

Similar Messages

Maybe you are looking for