Cannot connect to RV110w VPN error 619

Hello,
I'm having problems logging into my RV110w using either quickvpn or a windows pptp client connection....
I've been following the guide here but I just can't connect....I can connect via remote management however....
https://supportforums.cisco.com/document/124251/remote-vpn-tunnel
So :
IPSec, PPTP and L2Tp enabled.
RV110w firewall enabled
Block WAN Request enabled
Remote Management enabled - port 443
MPEE Encryption Enabled
Netbios over VPN Enabled
2 Clients created one for quickvpn and one for pptp.
Win 7 firewall enabled at remote end with rull to allow inbound ICMP Echo.
Exported Certificate and copied to the quickvpn install folder.
Disabled all other network adapters
QuickVPN tries to connect then shows a message listing possible reasons for a failed connection....
The quickvpn log shows:
2015/02/01 12:14:58 [STATUS]OS Version: Windows 7
2015/02/01 12:14:58 [STATUS]Windows Firewall Domain Profile Settings: ON
2015/02/01 12:14:58 [STATUS]Windows Firewall Private Profile Settings: ON
2015/02/01 12:14:58 [STATUS]Windows Firewall Private Profile Settings: ON
2015/02/01 12:14:58 [STATUS]One network interface detected with IP address 192.168.1.79
2015/02/01 12:14:58 [STATUS]Connecting...
2015/02/01 12:14:58 [DEBUG]Input VPN Server Address = 90.2.30.86
2015/02/01 12:14:58 [STATUS]Connecting to remote gateway with IP address: 90.2.30.86
2015/02/01 12:14:59 [STATUS]Remote gateway was reached by https ...
2015/02/01 12:14:59 [WARNING]Remote gateway wasn't reached...
2015/02/01 12:14:59 [WARNING]Failed to connect.
2015/02/01 12:15:20 [WARNING]Remote gateway wasn't reached...
2015/02/01 12:15:20 [WARNING]Failed to connect.
2015/02/01 12:15:20 [WARNING]Failed to connect!
The RV110w doesn't seem to log anything...?
If I try to connect using a windows pptp vpn connection I get an error 619 straight away and the RV110w log shows:
1
2015-02-01 12:20:14 AM
info
pptpd[22775]: CTRL: Client 123.150.210.162 control connection finished
2
2015-02-01 12:20:14 AM
debug
pptpd[22775]: CTRL: Reaping child PPP[22780]
3
2015-02-01 12:20:14 AM
err
pptpd[22775]: CTRL: PTY read or GRE write failed (pty,gre)=(12,13)
4
2015-02-01 12:20:14 AM
err
pptpd[22775]: GRE: read(fd=12,buffer=451c4c,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs
5
2015-02-01 12:20:14 AM
err
pppd[22780]: but I couldn't find any suitable secret (password) for it to use to do so.
6
2015-02-01 12:20:14 AM
err
pppd[22780]: The remote system is required to authenticate itself
7
2015-02-01 12:20:14 AM
info
pptpd[22775]: CTRL: Starting call (launching pppd, opening GRE)
8
2015-02-01 12:20:14 AM
info
pptpd[22775]: CTRL: Client 123.150.210.162 control connection started
This is all behind a talktalk fibre router, they say it's transparent and doesn't block anything but they won't support me any further than that. Ports 443 and 1723 do seem to be open when I scan so as far as I can see the talktalk router is transparent.
Do I need to create any rules on the RV110w firewall to get this working? or forward any ports to the router itself?
Thanks for any help, Kevin

I believe the problem is in iOS, as I am experiencing the same issue.
I have a Yosemite Server running L2TP VPN server and my Mac connects flawless, while neither the iPhone nor the iPad (both 8.2) are able to connect.
The error is the same "The L2TP-VPN server did not respond" and by looking at the server's log it seems iOS didn't even try to connect.
I have tried changing the server address in iOS with the corresponding IP, but the results it's the same.
Maybe a network setting reset?

Similar Messages

Cannot connect to L2TP VPN from iOS devices

This weekend I decided to perform a hard drive upgrade on my little 2009 Mac mini that I run as a homespun server as a hobby. In the process, I thought it would be worthwhile to flatten the whole thing and start again from fresh.
However, in doing so, I no longer seem to be able to connect to it's VPN from an iOS device. Both my iPhone 6 (iOS 8.1.3) and iPad 3rd Gen (iOS 8.1.3) cannot connect to the VPN server over an L2TP connection – either on my local network or over 3G, even if the local IP is provided instead of a host name.
Interestingly though, my MacBook Pro has no issues connecting over L2TP when tethered to my iPhone's 4G. It can dial back home and authenticate successfully.
The settings are exactly the same on both as both are governed under a single profile containing the VPN settings and login details.
It used to work before the hard drive upgrade, but can't remember the last time I used VPN on my iPhone. Just wondering if this is a bug in iOS 8.1.x?
iOS reports "The L2TP-VPN server did not respond". Additionally, there is absolutely nothing in the Server's console for VPN or 'racoon'. In the past when I've had issues, the connect is made but doesn't authenticate or some such. This just doesn't get to the server in any way shape or form.
Any ideas?

I believe the problem is in iOS, as I am experiencing the same issue.
I have a Yosemite Server running L2TP VPN server and my Mac connects flawless, while neither the iPhone nor the iPad (both 8.2) are able to connect.
The error is the same "The L2TP-VPN server did not respond" and by looking at the server's log it seems iOS didn't even try to connect.
I have tried changing the server address in iOS with the corresponding IP, but the results it's the same.
Maybe a network setting reset?

I cannot connect to FaceTime, encountered "error processing registration, please try later" message on my Macbook Air, but I don't have this problem on my IMac. Can anyone help?

I cannot connect to FaceTime, encountered "error processing registration, please try later" message on my Macbook Air, but I don't have this problem on my IMac. Can anyone help?

I have the same problem on my iMac. My facetime has been working, but now I'm getting the same error as You. I've been through the following:
The stuff that Linc Davis suggested, new profile on iMac, moved iMac into DMZ zone with no firewall rules, tested with other Apple-ID, checked hosts file, checked different timezone settings, tried to connect to 2 mobile APs (with diferent providors), changed DNS servers (ISP's DNS + Google DNS + Open DNS) - Nothing helped. Also talked to Apple Support, since i have Apple Care, but the seem to be a bit clueless also Well I've mailed them the results of my different tests, so lets see what they come up with - Unfortunately I'm sure it will be the same suggestion as all the major PC manufactures suggests, reinstall and test - RIGHT !!!!!!
If I get solution, I'll post it here.
Kind Regards
Kim

Cannot connect to activation server error when I tried to re-authorize my computer

I had problem copying library books to my kobo reader. It was OK back in Dec.
So I tried to erase authorization and re-authorize my computer to try as a fresh start.
I am getting a "cannot connect to activation server error". I have no problem connecting to the internet on all other sites that I am accessing.

I don't know if this will help, but I was having trouble today activating another Adobe product as well. Turns out the problem was other software on my computer - a program called "Net Nanny" that filters content and supposedly keeps malware and other stuff out. Maybe you have that or something similar, like a McAfee or Norton? Temporarily disabling the software fixed my problem. Good luck!

VPN ERROR 619 :: A connection to the remote computer could not be established, so the port used for this connection was closed

I have been searching endlessly for this issue. Every time I try to connect to a VPN connection I get the error above. Thank you for any relevant input concerning this matter. My NIC is Qualcomm Atheros and I'm in Win8.1 x64.

everything normal before?
is there any changes before this issue happen?
turn off your antivirus and firewall, update the latest VPN client software, if still not working go to security settings and change the VPN type automatic to PPTP. And also change data encryption configuration to Optional and select CHAP & MS-CHAP v2.
If still not working try with other internet connection and try to contact your VPN provider

Cannot connect to workplace (VPN) with wizard

I am trying to setup a VPN connection to my workplace on my laptop but am not able to get past the wizard. I was able to get it to work successfully on my desktop and others who have used Windows 7 have been able to connect also.
Specically, what I am doing is going to Network and Sharing Center, Set up a New Connection, Connect to a Workplace, Use my Internet Connection (VPN). I use an IP address that I know works on other machines. I have tried using the Don't Connect
Now option as well as without that option.
When I hit Create, I immediately get a "The wizard cannot connect" with only a Try Again option. If I try again, it will essentially hang and I've given it over 30 minutes at least once to try to figure it out.
I have Norton Antivirus and I disabled the Smart Firewall. I have tried uninstalling Norton Antivirus and disabling the default Windows Firewall. I have tried disabling Windows Defender. I'm not sure what else to try anymore.

Hi
You are trying to connect using the wizard. I recommend you try to connect using the connection itself.
After you are done with the wizard and the creation of your VPN connection (With the Don't connect now ticked), you should go back to Network and Sharing Center, on the left hand click on change adapter settings and you will see your VPN connection.
Here if you right click and get the properties of your connection, you can configure many options there depending on the settings of the VPN Server.
I recommend you do ask your server admin about the required settings of the connection and then change the settings on different tabs accordingly, like the type of encryption and the type of tunneling protocol and etc. or another thing you could do is go
to your desktop and go ahead with the same procedure and take note of the setting from the connection and then change the connection settings on your laptop accordingly.
That will probably help you
MCT, MCSA/MCSE Security
http://esitech.spaces.live.com/
Note, I cannot get through the wizard so I cannot get to the properties of the connection or anything else because it does not get created. Even when I choose the Don't Connect Now, I still get a Cannot Connect error (I mean why is it trying to connect
if I am telling it not to bother at the moment).
I am about as much as a server admin (at the company) than anyone else here. I highly doubt there is something wrong from the server point of view as it is working for everyone else including myself on my desktop. The issue is with the laptop.

Itunes cannot connect to iTunes store error 306

Hi, I think I originally posted this on the wrong forum. So I will repost and hope for the best.
Up until recently I used to connect to the internet via airport and everything worked fine. I could connect to iTunes store no problem.
The connection was all set up by the local phone company and somehow they connected the iMac to airport via a modem.
I know that this appears to defeat the point of airport but it worked fine.
I had connection problems with the modem (it was old and needed replaced) that was attached to the airport and iMac. I arranged for the telephone company to come and replace the modem. However, although they replaced the modem and the internet connection is fine.
What they did not do was to reconnect the Airport device and now I cannot connect with iTunes store. Now instead of connecting to the internet via the Airport connection I now connect via Ethernet
The error message I get is
"iTunes could not connect to the iTunes store. An unknown error occured (306).
Make sure your network connection is active and try again."
I think that if someone could advise how I stop trying to connect to the iTunes store via Airport but via an Ethernet connection
iMac intel Mac OS X (10.6.6)

iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings ( http://support.apple.com/kb/TS1490 ) and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
http://support.apple.com/kb/TS4123?viewlocale=en_US

Cannot connect to iTunes store - error -3212

iTunes is telling me that I cannot connect to their store or to my account. But I am connected to the internet as writing this support request should prove. The message says 'an unknown error occured - error (-3212)' This error only happened yesterday and is happening with both of my iPods. I have rebooted my laptop. When I did the iTunes Diognostic Check it says 'secure link to iTunes Store failed' but the others passed ('Network interfaces & Internet connection verified'). My computer is only 1 yr old (Asus Model U47A - i7, 8gb ram) and one iPod is only a week old and another is older. I hope there is a simple solution as I am not very tech savvy. I have checked online and have not seen this error anywhere.

I 'played' around with my Norton 360, did a scan, etc, and whatever I did something seems to have done the trick. It is solved and I am able to connect to iTunes store. I wish you luck with your -50 error.

HT1933 I get a "Cannot connect to iTunes store" error. How else can I report a purchase?

Hello there!
I just received a receipt for a game I have purchased for two friends (two distinct account without cards attached, so the game was purchased twice as a gift) but I have been charged for three copies and I want to report this problem.
So, naturally, I clicked on the Report... link under any of the purchases and I get the message:
"Cannot connect to iTunes store".
I don't want to let this get away. If there is no way of getting my money back, I want to have the game on my account as well!

Change your Date & Time settings from Automatic to OFF and then change the date a good month ahead. Open the app store from Passbook. Should load perfectly. Once you get in, change the date and time back to auto.
source -
http://www.macworld.com/article/2010185/fix-passbooks-app-store-error-in-ios-6.h tml

Cannot connect to service provider. error (2)

What I am facing right now, it always prompt me this error message
"Cannot connect to the provider. Make sure it is running in the specified host/port. Error(2)."
it is in version 9.3.1.2. this error i got when i try to connect any application through connection manager.
kindly help me regarding this.

If you are not the admin of the system then you will need to contact them to make sure APS is running, If you are the admin and APS is installed on windows then there will be a service named something like Hyperion Provider Services, you will need to start this service.
Cheers
John
http://john-goodwin.blogspot.com/

Cannot connect to You Tube / Error playing movie

I am connected to Wi-Fi (verified by checking out Safari) but I keep getting an error message when I try to connect to You Tube.
It says "Cannot connect to You Tube". When that message goes away and I try playing a clip it says " Error playing movie"
Anyone experience this? How to fix it? I have already restarted the phone.

yeah, i had this problem. resetting the phone to factory settings fixed the problem. just restore the phone through itunes (be sure to back up anything that might get lost in the full restore). youtube worked fine for me after this.

ITunes cannot connect with this iPad Error/iOS 5 problem

It appears that ever since upgrading to iOS 5 and opting to sync my first gen iPad wirelessly, I have been receiving an error message each morning stating "iTunes cannot connect with this iPad..."
The wireless sync capability works fine, I plug my iPad into the wall when I come home, and it starts pushing and pulling all the new apps that I've downloaded in the day.
It appears that iTunes is will regularly try to connect with the iPad while it is charging. At some point during the evenings, either my iPad will be asleep or my iMac will be asleep. I think this is where the connection problem is arising.
Does anyone know how to change iTunes' frequency of wireless sync to a device that it is wirelessly connected to? Ideally, I'd like it to only sync wirelessly once when I plug the iPad into the wall.

See if this page helps : http://support.apple.com/kb/TS3221

Cannot connect to PPTP VPN

am working on setting up a VPN on my MS Directaccess server. technically the vpn is up and running and working already. it is using a certificate that is issues to the DA server by the DA server. My domain joined PC's connect fine. I can also connect a non domain joined machine if I import that certificate into the PC. However I cannot connect any OSX clients or my android phone. We have opened up port 1723 on the firewall. I have tried to connect from my home and from another businesss locally to make sure it wasnt just my home router causing the issue for some reason.
I get this in the osx console log (I replaced the external IP with 1.1.1.1 for posting this online)
3/19/14 7:55:21 AM pppd[6282] pppd 2.4.2 (Apple version 412.5.70) started by admin, uid 501
3/19/14 7:55:24 AM pppd[6282] PPTP connecting to server '1.1.1.1' (1.1.1.1)...
3/19/14 7:55:24 AM pppd[6282] PPTP connection established.
3/19/14 7:55:24 AM pppd[6282] PPTP connection established.
3/19/14 7:55:24 AM pppd[6282] Connect: ppp0 <--> socket[34:17]
3/19/14 7:55:52 AM login[6318] USER_PROCESS: 6318 ttys001
3/19/14 7:55:54 AM pppd[6282] LCP: timeout sending Config-Requests
3/19/14 7:55:54 AM pppd[6282] Connection terminated.
3/19/14 7:55:54 AM pppd[6282] PPTP disconnecting...
3/19/14 7:55:54 AM pppd[6282] PPTP disconnected
On the directaccess server I get this in the event viewer everytime the OSX client tries to connect. This at least proves that I can at least connect to the server from the outside.
Event 20209, RasMan
A connection between the VPN server and the VPN client 24.97.100.42 has been established, but the VPN connection cannot be completed. The most common cause for this is that a firewall or router between the VPN server and the VPN client is not configured to allow Generic Routing Encapsulation (GRE) packets (protocol 47).
Im assuming this isnt a port or protocol issus since I can connect via my non domain joined Windows PC. Im out of ideas as to what I can do next

Here is a snapshot of my console
http://imgur.com/pYFprPk

Cannot connect to Lion VPN service unless server is locally logged into?

I work remotely a lot. After I upgraded to Lion server, I am unable to connect to the VPN service remotely unless I physically go over to the server (mac pro) and log into the desktop manually.
Previously, if my Snow Leopard server restarted (due to power failure, etc) and it re-booted up to the login screen, I could still logon to the VPN remotely as the VPN service would always startup (at the login screen) without a user having to be logging in.
Now, with Lion Server (10.7.4), if the server restarts, I cannot login back to the VPN. I have to get someone to go over to the server and manually login, then I can access VPN just fine. (I do not, and will not turn automatic login on on my server due to the huge security risk.)
How do I get the Lion Server VPN service to startup before or at the logon screen even if no user is logged in?
Help is greatly appreciated!

Can you SSH into the box when VPN isn't working?
If so, ssh into the box, and look at the VPN logs when you're attempting to use the VPN. The logs are (usually) in /var/log/ppp/vpnd.log
I typically look at logs like this so I can see how they're updated in real time:
tail -f /var/log/ppp/vpnd.log
If you're VPN login is failing and there is data being pushed to that log, it may help us to figure out what's going on with your system.
Ricardo

Getting "cannot connect to iTunes store error from one appleID but another works fine

I have 2 apple ID's, a personal one, and one that me and a couple of coworkers share so that we can share apps we purchase. I cannot log into the shared AppleID from my ipad. I can from my PC so I know it is not an incorrect password or anything like that. I get the error "cannot connect to iTunes Store". Is this because too many of us are logged into the same apple ID at once? I tried changing the password so that it would kick everyone else off, but even with a new password I get the error. I am able to login with my personal apple ID just fine, so I know it's not an issue with my wifi or my ipad software (i don't think). anyone else experienced this and found a solution?

Hello 66ladybird88,
I understand you are trying to access the iTunes Store on your Windows computer but are getting an alert with the number 0x80092013. There is an article that address this kind of alert and has some great troubleshooting steps for resolution. I understand the alert in the article is slightly different than the one you are getting but I recommend the same steps listed.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
Resolution
The cause for these issues is a program that monitors the Winsock protocol for Windows conflicting with Apple software. These programs usually use a Layered Service Provider (LSP) that can help identify the particular program installed. The programs that monitor this protocol have a variety of purposes, including security software, content filtering, and optimization of network traffic.
Thanks for reaching out,
-Joe

Cannot connect to RV110w VPN error 619

Similar Messages

Maybe you are looking for