Cannot connect to server using message server: ms://xiidhasoft:50004/P4

Hi SAP Guru's
When PISUPER or any any of the enduser is trying to login in the Integration Builder , they are getting error
Cannot connect to server using message server: ms://xiidhasoft:50004/P4
I have tryed to search in SDN and got below solution but no success
1. Exchange Profile of PI - http://host:port/exchangeProfile
2. Check with the rmi port number.
3. if rmi port number is empty or any number is present ( check with Tr code: SMICM - services - check for p4 port number - it will be ex: 5<nr>04)
4. fill the rmi port number as present in the P4.
OR
implement note 864268
I have Netweaver PI 7.1 .
Please suggest some alternative solution.
Thanks & Regards
Vinay Patel

You may check your local PC Java Network Setting.
Troubleshooting:
Probably Javau2122 WebStart does not detect the correct Proxy Settings. In this case please proceed as follows:
To change the Proxy Settings for Javau2122 Web Start:
1. Click Start --> Run and enter javaws. Press button OK.
2. Control Panel -> Programs ->Java -> Network Settings...
3. Select Direct Connection to switch off the proxy settings and press button OK.
If this still does not work, select Use proxy server to set manually the HTTP Proxy and Port.
Contact your network administrator for the correct settings.

Similar Messages

PI 7.11: Cannot connect to server using message server:...

Hello Guys,
we make the Application Management for a Customer PI System.
Scenario:
- the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
- WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
Problem:
Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
"Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
In the Details from the Error Message:
"<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
Sorry for my bad English
Best Regards,
Markus

Hi Markus,
did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented. There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
(This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
Solution: Establish a connection without any proxy in between.
E.g.: a terminal server in the same network
It would be helpful to find more people with the same problem to force a fix from SAP for that.
If anyone else is having problems with this, please add a comment to this thread.
Best regards
Christian

My phone wont back up or sync to itunes 10.6. i have a windows 7 32 bit laptop. i have tried updating the ios and receive the message saying it cannot connect to the iphone update server please check network connection. any help

have a iphone 4. i have downloaded the latest version of itunes to update the ios. I am having problems with the back up and sync and also the update. the update error message is coming up saying it cannot connect to the iphone update server. I am useing a windows 7 32 bit laptop. I have also reset my phone to factory settings. Would taking it to one of the stores and they would do it for me??
any help will be great thank you

All I can tell you is that I am having the exact same problem with an iPod Touch and that I was running iTunes 9.2.1.5 at the time it happened. Upgraded to 10.0.0.68 hoping that it might help, but no joy.
I don't want to do a restore just now since the Touch seems to be working fine. Restore will have to wait until I have plenty of free time in case something goes wrong.

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

DUPLICATE DB : ORA-17629: Cannot connect to the remote database server

[oracle@ora11g1 ~]$ export ORACLE_SID=sales
[oracle@ora11g1 ~]$ rman target sys/sales@sales
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Jun 5 13:00:15 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SALES (DBID=690066655)
RMAN> connect auxiliary sys/salestby2@salestby2
connected to auxiliary database: SALES (not mounted)
RMAN> DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE SPFILE
2> SET DB_NAME= 'sales'
3> SET DB_UNIQUE_NAME= 'salestby2'
4> SET control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl'
5> SET DB_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/'
6> SET LOG_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/';
Starting Duplicate Db at 05-JUN-13
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=20 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora''";
executing Memory Script
Starting backup at 05-JUN-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=58 device type=DISK
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:26
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database server
continuing other job steps, job failed will not be re-run
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/05/2013 13:05:27
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:27
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database server

Welcome to the oracle forums!
Please take some time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535]FAQ PAGE
Always post 4 digit oracle version and OS details.
Post any query out put between \ \ tags
Mark your questions as answered if you get the answer
Password of SYS user on primary and standby must be same.Copy the password file from primary to standby server
scp $ORACLE_HOME/dbs/orapwv112 <oracle_user@auxiliary_host>:/u01/app/oracle/product/11.2/dbs/orapwdupv112

Please Help!!! 'iTunes cannot connect to iphone update software server'

I cannot 'Restore' iPhone 3G to pass on to my fiance, after she kindly allowed me to get a new iPhone4 because iTunes 'cannot connect to iphone update software server'. I have tried both our laptop and desktop - both connecting to the internet fine - but neither will connect to the iTunes store nor update servers!!
Not sure what to try next, have tried setting up new user to no avail.
I have followed the support guidance and I am not connected through proxy.
Diagnostics reported as follows:
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
Dell Inc. Dell DV051
iTunes 9.2.1.5
QuickTime 7.6.6
FairPlay 1.8.20
Apple Application Support 1.3
iPod Updater Library 9.2d4
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.1.0.62
Apple Mobile Device Driver 1.49.0.0
Bonjour 2.0.2.0 (214.3)
iTunes Serial Number 098625257EFAC14A
Current user is an administrator.
The current local date and time is 2010-07-25 12:16:28.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Video Display Information
Intel(R) 82915G/GV/910GL Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {F45A9B15-8BE6-4964-8534-71947B51A91B}
Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
IP Address: 192.168.1.77
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: No
DHCP Server: 255.255.255.255
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers: 192.168.1.1
192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-07-25 10:25:45.
** Device Connectivity Tests **
iPodService 9.2.1.5 is currently running.

Right, I'm going to try something, if this works, then this'll probably fix a lot of iTunes problems.
1: Make sure your whole iTunes database is backed up.
2: Uninstall iTunes, then run "Revo Uninstaller", this will remove ALL traces of iTunes from you computer, not your library.
I've found out that when un-installing or re-installing over a previous version of iTunes will carry over some problems from previous versions, or even create problems. Registry leftovers can be a problem also. Completely removing iTunes using "Revo Uninstaller" then re-installing will have the same effect as installing iTunes from a fresh OS install. Typically iTunes should be problem free when installed totally fresh.
3: Re-install the correct version of iTunes fresh and try again.

Cannot connect to the specified SQL Server instance

I am trying to install Microsoft System Center 2012 R2 Virtual Machine Management.
I am getting the following error:
Setup cannot connect to the specified SQL Server instance.
Ensure that the server name, isntance name, and, if speceified, port number are correct. If you are installing VMM remotely, ensure that remote connections are set up correctly, and then try Setup again.
I have installed the
Microsoft® SQL Server® 2008 R2 Command Line Utilities
but have not set up any SQL Server instances.
how should i proceed?
Edit:
The followign fields are configured:
Server Name: The name of the machine i am using
Port: <empty>
Use the following credentials <NOT ticked>
Instance name <empty> (the drop down is empty)
New Database <Ticked> : VirtualManagerDB

Is SQL server is properly installed on the system?
Are you able to connect with SQL server instance?
As per the given details looks, only client utilities installed and trying to create the database which needs SQL server.
Make sure you are able to connect with the "ServerName\InstanceName,PortNumber" and hope installing the system as per below article:
http://technet.microsoft.com/en-us/library/gg610656.aspx
Hope it help!
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Setup cannot connect to the specified SQL Server instance

On a clean install domain member (Windows 2012), I am trying to setup System center 2012 VMM:
1. I installed the prerequisites as instructed during the pre-setup phase of the installation then rebooted the server (SQL Server 2012 was installed and services seem to be all started properly and SQL Configuration Manager starts as well).
2. After reboot, logged again with domain admin account and Windows update installed right away SP1 for SQL server 2012. Then I rebooted again.
3. Restarted the installation process and left default values. At the "Database configuration" step, I am leaving everything by default as well and I am getting error: "Setup cannot connect to the specified SQL Server instance. Ensure that
the server name..."
4. Tried different credentials, tried using port 1433 with no effect.
Am I missing something????
Thanks.
Benjilafouine

Definitely be sure to connect with the "ServerName\InstanceName,PortNumber". If you don't reference a port number it will try 1433 and then will connect via a dynamic port number. It is best in my opinion to always specify a specific port for each instance
to listen on in the SQL Server Configuration Manager so that you can open the fewest number of ports in the Windows firewall.

Can't start server -- Fatal error: Cannot connect to user group ldap server

After installing iCS 2.1, iCS 2.1p1, and iCS 2.1p3, a user will receive the
following error message when trying to start the server:

Fatal error: Cannot connect to user group ldap server.

In addition, the Directory Server access logs will contain the following
entry:

-0400] conn=125 op=1 SRCH base="dc=ldgw-llc,dc=com" scope=2
filter="(objectclass=People)"
In the server.conf file,
check the local.enduseradmindn
parameter. The parameter
should appear as follows:

uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot

If the parameter contains
"calmaster" or any user
other than "admin,"
change it to match the line above.

Hi,
I am getting the same error, kindly let me know how did you solved this problem
Thanks
Ahmad

TS3276 I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

Sometimes deleting the account and then re-creating it can solve this issue
Write down all the information in accounts before doing this
Highlight the account on the left and click the minus button
Then click the plus button to add the new account and follow the prompts

Fatal error 78: Cannot connect to User Group LDAP Server

After configuring Calendar server when trying to start:
give following error:
# ./start-cal
Restarting calendar services
Stopping all calendar services
Starting all calendar services
# enpd is started
csnotifyd is started
csadmind is started
Fatal error 78: Cannot connect to User Group LDAP Server
cshttpd is not started
Calendar service(s) not started
cshttpd is not started
Calendar service(s) not started
Following logs are from http logs of calendar server
[13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Information: Log created (1095109367)
[13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Notice: Sun Java System Calendar Server 6 2004Q2 (built Apr 28 2004) cshttpd starting up
[13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd attempting to open Counters Database
[13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd successfully opened the Counters Database
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: HTTP Module is refreshing
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd is refreshing
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd is refreshed
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: HTTP Module has refreshed
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd: argc=3 argv[0]=/opt/SUNWics5/cal/lib/cshttpd
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: session_init: attempting to open session database for cshttpd
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Notice: session_init: session database open completed for cshttpd
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: Store Critical: Error checking session database: DB->set_alloc: method not permitted in shared environment
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Notice: LdapCacheInit: Ldap Cache not enabled.
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd_parse_commandline: successfully bind process 17916 to processor 0
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Critical: Fatal error 78: Cannot connect to User Group LDAP Server
Have any body seen this before.
Regards

The server was running fine for few months until i restarted the calendar server. i started to see the same error and the problem was the machine name got changed at some point.
I added the old hostname to the /etc/hosts file and restarted the calender server and it started to work fine.

Enqueue server and Message server in ABAP/Java dual stack

Hi you guys,
I have some questions when studying SAP, could you please explain for me:
- In ABAP and Java system, do each stack have it own enqueue server and message server?
- What is the difference between Enqueue server and enqueue work process in ABAP stack?
- If there is one message server for each stack, which messager server (ABAP or Java) will the Web dispatcher connect directly to?
- How do ABAP message server and Java message server communicate with each other?
Thank you very much.

1. in Dual Stack, normally you have ABAP Stack and SCS Central service Instance. ABAP Instance has Message server, SCS has it own Message server and enqueue server. ABAP instance doesn't have enqueue server, because the SCS already has enqueue service
2. Communication between ABAP and J2EE Engine uses RFC (JCo) or HTTP Interface.
Web Dispatcher will connect to the ICM of that instance, and the ICM is talking to Abap dispatcher and J2EE Dispatcher.
3. The term: enqueue server and enqueue work process , already shows its different quite obviously.
What so confuse about it ? do some search on SAP Online Documentation.
Regards,
Vincent

Cannot connect to app store message keeps coming up on my iPad.

Cannot connect to app store message keeps coming up on my iPad. My connection is fine I am just unable to get apps help??

Hi, Claire916,
Okay, thanks for offering those helpful details
it's a brand new iPad;
you did the initial setup via Setup Assistant;
you are getting online via your home wi-fi network
Internet sites appear to be performing as expected;
you restored your "whole ipad"
New questions:
Regarding the last point (restoring your iPad), which option did you choose?
     a. Settings > General > Reset All Settings; OR
     b. Settings > General > Erase All Content and Settings.
Using the iTunes app on your iPad, are you able to purchase and download a song?
Using the iTunes application on your computer:
are you able to purchase and download a song?
are you able to purchase and install an iPad app?
Finally — for now, at least — let's be sure we've covered all the bases by double-checking that, unlikely as it is, no one has enabled a restriction against Installing Apps on your iPad.   Do this by looking in Settings > General > Restrictions.
Please don't become too frustrated with this bug. It is a fixable problem, and it will eventually be fixed for you. Nevertheless, if ever you feel impatient with the pace of help that I or someone else on this thread offers you, remember you can always make an appointment with the highly-trained and knowledgeable folks at your nearest Apple Store's Genius Bar.

TS4479 Apple TV2 cannot connect to Netflix .. message on tv screen always say "Netflix currently unavailable."

Apple TV2 cannot connect to Netflix .. message on tv screen always say "Netflix currently unavailable. Please try again later." I have tried both wifi and ethernet connection but to no avail. ANY HELP IS APPRECIATED.

..hi, Diesel.
..after resetting, and for the first time ever, ATV2 is able to access Netflix and that I was able to log in for the first time too! It stayed on processing for the longest time getting in into Netflix. However, the same message "Netflix is currently unavailable. Try again later." had reappeared on tv screen after. Resetted and restarted ATV2 again but the same message had reappeared.

Why do I get "Cannot connect to ITunes Store" message on my IPad and IPhone?

Why do I get "Cannot connect to ITunes Store" message on my IPad and IPhone?
I have tried numerous times to connect to ITunes Store to update my current apps and continue to get this message. Apple has determined that it is not a device problem or an Apple problem. It has to do with ITunes. Can anyone help?

I am having no problems downloading from the app store today. I just tried it again. However, I read some of those other discussions as well and there have been times when the iTunes or App Store has been out of commission. Don't hold your breath waiting for Apple to acknowledge it because that is not going to happen. That is not how they operate.
You can report it to them here ....
http://www.apple.com/support/itunes/contact/

Cannot connect to server using message server: ms://xiidhasoft:50004/P4

Similar Messages

Maybe you are looking for