Cannot connect to server windows xp

paul tikkanen
hi it's  me again, you did a really  good job on that service pact #3. yesterday it really work just fine.  today  i logon  & i  got
a prompt saying  cannot connect to server.   i did the internet options process a few times  and then a new page show up 
saying  this page can not be display.  it prompt me to do the internet options  again  same thing again...can you help me 
again.  the internet is working  fine..   thank you--------billyg

Hi:
If you connect to the network via an ethernet cable, did you install the ethernet driver for your PC?
Or if you connect to the network wirelessly, did you install the wireless driver?
If you have installed either driver, unfortunately, I do not know what you can do about that problem.

Similar Messages

  • Error message "cannot connect to server"

    Often I get an error message "cannot connect to server" when
    I want to connect to acrobat.com directly from a .pdf document in
    order to upload it . Is it possible that there is some security
    issue involved, e.g. that the document is protected somehow? Or
    could browser or firewall settings be involved?

    Hi Peterernst,
    Thanks for posting.
    Perhaps yes, firewall, and browser popup blockers have been
    known to cause some behavioral, and connectivity issues within
    Acrobat.com
    Users have had success with allowing *.acrobat.com as a
    trusted site locally, to see if that allows connectivity.
    Also what browser, and OS are you using?
    If still in the Unix environment, do you have access to a
    Windows, or Mac environment?
    Thanks!
    Pete

  • Safari Cannot Connect with Server (mountain lion) on wifi

    I Posted this under Mountain Lion as Safari had no connectivity issues for me when I got my mbp and it had lion installed and ran beautifully-
    NOW my apple (s) run fine on mountain lion
    for a little bit,
    and then I get "Safari Cannot Connect to Server"
    Now during this frequent occurance the  APP store hangs and hangs as well.
    This is most annoying-
    The only way to use my apple products after this happens is to restart them
    and then they work until they go into sleep mode,
    sometimes they screw up before that and then
    "Safari Cannot Connect to Server"
    my Airport utility shows that it is scanning for  networks-
    When I was right in the middle of buying something from amazon-- I had to go to my decrepit old windows xp connected up only for cox email to complete the transaction-
    This is not acceptable. Since it occurs on both of my apple computers and only started when I installed mountain lion.
    This has continually gotten worse to the point I must restart my laptop continually-
    Apple better get the lead out of their butts and fix this glaring fault- or should I install another web browser?
    which I am disinclined to do-
    I spent a fortune on these apple products and I expect them to work properly- I went to apple because I was so sick of microsoft and its endless headaches and updates and freezes lol--
    kind of funny if you think about it.

    Hi BSU1960, 
    I found the solution to my problem on a different forum.  Turns out for some reason the anti-virus software that I run was interferring with my browsers' connecting to the internet.  Once I disabled the web protion of the anti-virus my problem went away.
    I have a question to Kaspersky Security, hopefully will find out what was the root cause.

  • Cannot Connect to Server - Please Help!

    I have a MacBook w/Leopard and Parallels w/Windows XP. Everything has been working fine for over a year. After a recent trip (and using several different motel wifi connections) I cannot connect to our Windows based home server. The server is primarily used for printer sharing. I can connect and print on the Windows "side" of my Mac, but not on the Mac itself. Server connection attempts return the "Connection failed" message and print attempts return "Connection failed: NTSTATUS_BAD_NETWORKNAME", then "Unable to connect to CIFS host, will retry in 60 seconds...". I cannot understand how I can connect and print w/Windows (which is running on my Mac) but cannot connect or print with the Mac. I have restored my hard drive from Time Machine, checked the server network ID and just about everything else I can think of.
    Any advice or suggestions will be greatly appreciated!

    Still unable to print/connect from the Mac and able to print/connect from Parallels/Windows. Internet functionality is normal on both.
    Any ideas???

  • Can't connect to vista pc anymore/ cannot connect to server because

    I'm getting an error saying it cannot connect to server because username or password is not correct. Everything was fine on my old belkin router but i've had this issue since changing over to the new airpotr extreme.
    My windows vista pc has sharing on (for the folders i need) I even shut my firewall down etc but the pc still doesn't show up in my networks. I tried my laptop and that worked no problem but its a power book not windows.
    any suggestions out there? thanks

    Hello,
    Try this:
    1. Make sure you have installed the AirPort software on your Vista PC
    2. Reboot the PC
    3. On the AEBS(n), under Disks --> File Sharing, set Guest Access: Read and Write
    4, On Vista PC, select "Guest Access" in the AirPort Utility
    5. AirPort Disk should show up in "My Computer" as z/AirPortDiskName
    At least that's how mine is et up, and it works fine for Vista.

  • O365 lync says cannot connect to server

    I have O365 Premium business. When I downloaded Lync app from Windows store it says cannot connect to server.
    help!

    Hi shakingmyhead,
    Please follow the guide to troubleshoot your problem.
    For Admins:
    https://support2.microsoft.com/common/survey.aspx?scid=sw;en;3695&showpage=1
    For Users:
    https://support2.microsoft.com/common/survey.aspx?scid=sw;en;3719&showpage=1
    If you have any further question, you can also post a question on Office365 forum for assistance.
    http://community.office365.com/en-us/f/166.aspx
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • PI 7.11: Cannot connect to server using message server:...

    Hello Guys,
    we make the Application Management for a Customer PI System.
    Scenario:
    - the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
      SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
    - WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
      Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
    Problem:
    Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
    "Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
    In the Details from the Error Message:
    "<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
    Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
    The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
    Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
    Sorry for my bad English
    Best Regards,
    Markus

    Hi Markus,
    did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
    P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented.  There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
    If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
    (This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
    Solution: Establish a connection without any proxy in between.
      E.g.: a terminal server in the same network
    It would be helpful to find more people with the same problem to force a fix from SAP for that.
    If anyone else is having problems with this, please add a comment to this thread.
    Best regards
    Christian

  • MacBook Pro, iPad IV and iPhone 4S Cannot Connect to Server

    I have a MacBook Pro running Mountain Lion 10.8.5, and an iPad IV, both less than three months old. I also have a pair of iPhone 4s's.
    All of a sudden none of them can reliably connect to our AT&T Wireless home internet. There are particular websites we are blocked from viewing, notably any apple website, including apple.com, apple support, itunes, and App store, but also random ones like Wikipedia and others. We constantly get the "cannot connect to server" message. Yet other websites load right up with no problem.
    Many  websites are seriously snarled up, particularly Ebay, which is a critical one for me to have quick access to. Ebay screens are scrambled and out of order, act like purchases are being made when they're not, and photos don't show. All we get is little blue questionmarks.
    Multiple  PCs running on our home network work just fine, and we can get into any website with them. But ANY apple product is just stymied. We can turn off wifi on the phones, and get into websites with 3g, but as soon as the wife is turned back on, we're back to square one.
    Nothing has changed on our network recently, although we did get a new router about three months ago after having consistent outages. I have noticed our wifi getting glitchier and slower as time goes by,  but again, it affects the Apple products, until it just went totally haywire last week.
    My husband gets wifi at work just fine, and I am accessing wifi quickly and accurately on the MBP at this very moment on a museum network.
    The issue seems to be the AT&T home network, and very specifically with the full line of Apple products.
    Any clean and easy suggestions? I don't want to have to jump through hoops on four different products, and I now suspect it's something to do with AT&T?

    Pleeeeeeease. Somebody? Anybody?
         I can't get into Facebook, or Ebay on my MacBook. Life is too short to weep and lose hair over computers. Surely there's a quick fix I just haven't thought of?

  • I recently updated to iOS 8.0 on my Ipad however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this?

    Hi, I recently updated to iOS 8.0 on my Ipad mini however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this problem? Also i cannot download anything from the App store as a result of this.

    Can you check the Object Security for the Analysis Menu and Export button and see if it is restricted?
    Also, is this a Oracle DB?  IF so, has the following 32 bit Oracle Client components been isntalled:
    Oracle Objects for OLE
    Oracle Data Provider for .NET
    Oracle Providers for ASP.NET

  • HP ENVY 4500 Printer "Error. Cannot connect to Server"

    Hey everybody,
    I work in IT and have a client that recently purchased a HP Envy 4500 all-in-one. She called me to install it for her and I got it set up with no problems. After a few days she told me that her printer wouldn't scan. It was giving her this error message;
    "Error. Cannot connect to Server. Check Server name and address."
    She has this computer connected via USB and I have already reinstalled the driver and ran the HP Print and Scan Doctor with no success. I have tried a lot of other solutions that people have been posting with the same issue but none have worked. This has become a huge issue and I don't see HP trying to find a solution. If no soultion will fix this, then I will be returning this printer for her and getting something that works.
    Any help would be greatly appreciated,
    bbritt91

    Hi bbritt91,
    Welcome to the HP Support Forums. I understand that you are getting a connection error message when trying to use the scan to email feature of your Envy 4500 printer.
    To be able to use the scan to email feature the printer must be setup with web services which requires the printer to be connected to your wireless network with an active internet connection. I have included the Getting Started with ePrint document for reference.  
    If the printer has been setup with a wireless connection, please set a manual IP address and manual DNS server for the printer. I have included a link to another post with the steps, including screen shots, on how to do this. Please don’t worry that the screen shots are for a Photosmart 7510, the steps are the same.
    Please let me know how it goes.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • "Cannot connect to server" error when setting up MAMP local server in Dreamweaver cc 2014

    I am trying to set up my Wordpress 4.1 site with MAMP 3.0.7.3 in Dreamweaver cc 2014, but I am getting a "Cannot connect to server" error when trying to view the site live. The site works fine on the localhost:8888. I am using OS X Yosemite and PHP 5.6.2. Below are screenshots of my Dreamweaver settings. Thanks in advance.

    Hi Subhadeep!
    Think I'm getting closer (Lol). I did as you suggested and changed the web url to http://localhost:8888/Documents/projects/whoknew/. As you suggested I moved the local site to the Documents folder under the sub-folder projects. It is connecting to the server, but now I am getting the requested url cannot be found on the server. Below are screenshots of my current settings.
    http://localhost:8888/Documents/projects/whoknew/. As you suggested I moved the local site to the Documents folder under the sub-folder projects. It is connecting to the server, but now I am getting the requested url cannot be found on the server. Below are screenshots of my current settings. Thank you!

  • I get the error messages: "Server not found" or "Cannot connect to Server" and thus cannot print. I don't even know what a server is.

    Hello: I am not computer savvy.
    I have run "Network Diagnostics" and the message "Cannot connect to Server" comes up. I can connect to the internet. I have tried turning off the whole system and the printer individually and nothing seems to change the message.

    hello,
    i got the same issue i'm using kde the link abe for "Adding a login manager (KDM, GDM, or XDM) to automatically boot on startup" guide is dead
    arkham wrote:Have you tried the inittab approach for starting kdm? http://wiki.archlinux.org/index.php/Add … tab_Method
    could you help me please ?
    Thank you
    Last edited by hael (2012-05-05 08:57:44)

  • When I want to create a pdf from a webpage I get:"cannot connect to server" why?

    when I want to create a pdf from a webpage I get:"cannot connect to server" why?

    Did you set you Preference im the right way? See
    http://help.adobe.com/en_US/acrobat/X/pro/using/WS533B928E-576F-4dc3-AA14-73D08EEE8F20.w.h tml
    the newer link leeds to https://helpx.adobe.com/acrobat/topics.html .
    You could use the German link too:
    http://help.adobe.com/de_DE/acrobat/using/WSa65464b4e07c3e0a781ee72f1298fed479c-7ffe.html
    Hans-Günter

  • How to label servers in the connect to server window

    In the connect to server window... is there a way to label the servers other then the I.P.s?  I have numerious computers I connect with and it get's a little hard knowing what is what.  I know about the history drop down that gives the computer name, I was wondering about the main window.
    Thanks

    Though you reposted this topic in the Swing forum as
    http://forum.java.sun.com/thread.jsp?thread=218408&forum=57&message=760200
    it will be difficult to handle it in one of those forums.
    I suggest to split your question into 2, a JDBC related one and a Swing related one, and post each of them in the appropiate forum.
    For the JDBC part of your question:
    What means: save file in the database?
    A file is a set of data - is your problem any different from saving data from an array or String variable or other data?

  • TS1398 iTunes , cannot connect to server. At both, my fathers and at my place, with both, his iPad1 and my iPad 3

    Started out with "Text Plus" triple charging me. Gave up on them.  iTunes sent me an email with the receipt of all 3 charges with "report a problem"  under each purchase. I clicked on it and that's when I had on my screen "cannot connect to server". This happens with both my iPodtouch 4 th gen. &amp; my new iPad3 , both are WiFi. This also happens at my place and my fathers, with my products and the iPad 1 WiFi I gave to him. I can get on my iTunes but can't buy anything. I can sync . Please someone help, Sue

    I just now did what you said and now it says; iTunes, cannot connect to iTunes store.
    Very puzzling indeed, I contacted iTunes the other day and Derrick told me to go to Apple , I did and they said their support community has dealt with this problem before and now I am here. I think I am going to sync my iPad with iTunes for the 8th time and see if that does anything, it's been about 24 hrs. Since I did it last. Thank you for your help,Sue

Maybe you are looking for

  • How to find out the properties of a field's/object's?

    Hello I have field (say, its name is field_1) in my_form and  i am coloring yellow by using below code of initialization event: this.ui.oneOfChild.border.fill.color.value = "255,255,191"; (Actually, just for differentiating / tracing back purpose her

  • File size too big with project manager

    I'm working on a single video file with a size of 46,44 GB (Apple XDCAM HD422 1080i50 (50 MBit/s CBR), 1920 × 1080 (1888 × 1062), 16,7 Mill.). Clips from this file are copied to three seperate sequences (One rough cut and two final cuts). When I try

  • ADF Faces - access to content in WEB-INF directory

    Hello, I create simple JSF application that use ADF Faces and deploy it to Oracle iAS. But why can i also access files in WEB-INF directory? For example, the following URL - http://myserver.si/MyApp/faces/WEB-INF/web.xml - will return the content of

  • JDBC Connection Hangs

    I'm using the connection pooling system from Jakarta commons. My database access works fine most of the time, but for some reason sometimes the database hangs. I will try to access the web-app and the login screen will come up fine, but when I try to

  • Connection not showing tables

    Hello, I have connected to my php/mysql database. But the problem is that I don't see any tables, I know my database has tables. the programmer before me installed cake could that be an issue? I am using vista, dwcs4 THanks