Cannot connect to service manager portal wcf service

I only get this error on one request offering. Everything else on the portal works fine. This RO worked until I update one of the user prompts. The prompt is a query result that is configured to return domain users only of display name
equals the users that I have listed. I have about 40 users display names listed under the criteria. I didnt set token, do I have to?
What else might effect the WCF service for only one item on the portal?
- Get on the floor, do that dinosaur

Well I looked in the silverlight trace log which said:
The maximum string content length quota (24576) has been exceeded while reading XML data. This quota may be increased by changing the MaxStringContentLength property on the XmlDictionaryReaderQuotas object used when creating the XML reader.'. Please
see InnerException for more details.
I'm not sure how to increase this though.
- Get on the floor, do that dinosaur

Similar Messages

Cannot connect to the Service Manager portal WCF service - Error when opening SM Portal

Greetings,
I have tried everything I can think of to resolve this issue and I have tried all suggestions I have found on Technet.
Basically, I had the SM Portal working on a test VM. I am ready to use it in production but it is not working. I deleted my test VM and built a new one. On it, I have SharePoint 2010 Foundation and the SM Portal installed. I have
a valid self-signed cert. the FQDN is correct (hqsrva24.dds.local) in both SharePoint and also in IIS. I also made sure under Application Settings on the SM Portal IIS site points to the FQDN of the SCSMWebContentServer.
So what happens when I go to the SM Portal (https://hqsrva24.dds.local:444/SMPortal) is it prompts me for a logon, which i put in and the site comes up. But at that point the Silverlight portion is not loaded and I immediately get prompted for a logon.
I have tried several different logons, all of which have full access to the site in Sharepoint. Eventually I get the error in red at the bottom of the screen "Cannot connect to the Service Manager portal WCF service"
If I try to access the Web Content Server service on its own (https://hqsrva24.dds.local/Servicehost/services/DataAccessService.svc), I get a prompt to logon and none of my logons work. i eventually get
an unauthorized error. However; If I log into the server which SM Portal is on and go to https://localhost/Servicehost/services/DataAccessService.svc, I get no prompt to login and I get a "Metapublishing for this service is currently disabled."
I'm out of ideas at this point, barring completely starting over (not just the SM portal but all of the Service Manager Suite).

Man I've had this problem so many times and its almost always a different solution. Are you sure that either the Domain Users group or NT Authority\Authenticated Users have permissions to the site and service. remember the the two prompts are authenticating
different things: the Sharepoint site and the application site (silverlight). Make sure users have permission in both SCSM and in Sharepoint.
- Slow is smooth and smooth is fast.

Error: "Cannot connect to the Service Manager portal WCF service on SSP" SCSM 2012

I have the SSP installed on a Sharepoint 2010 server. The web portal is installed on the SCSM 2012 management server. When opening the SMPortal I get an error message at the bottom
"Cannot connect to the Service Manager portal WCF service. Please contact your helpdesk or UT administrator for further help."
I have manually modified the web.config on the portal for SSL and the Application Settings in Sharepoint IIS per the guidance of others. I'm able to open the service in a browser. Assistance is greatly appreciated.

Http and https is bound on both the content server and the portal. That didn't work. Same error message:
Cannot connect to the Service Manager portal WCF service. Please contact your helpdesk or IT administrator for further help.
Here's the IIS log for the content server
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/ServiceCatalogSilverlightModule.xap - 443 - 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 401 2 5 2078
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/ServiceCatalogSilverlightModule.xap - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 140
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/Instrumentation.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 46
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/BaseSilverlightModule.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 31
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/AdvancedResources.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 15
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/DataAccess.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 31
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/Core.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 46
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/BasicResources.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 46
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/BuildConstants.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 15
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/CustomControls.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 31
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/WizardResources.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 46
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/System.ComponentModel.DataAnnotations.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 15
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/ToolkitResources.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 46
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/System.Windows.Controls.Data.Input.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 31
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/System.Windows.Controls.Navigation.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 31
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/System.ComponentModel.Composition.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 62
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/System.Windows.Controls.Input.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 31
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/System.Windows.Controls.Data.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 140
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/System.Windows.Controls.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 218
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/en/Settings.xml - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 404 0 2 15
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/System.Windows.Controls.Toolkit.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 218
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/System.Xml.Serialization.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 234
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/System.Windows.Data.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 234
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/System.Xml.Linq.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 250
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/en/SilverlightModule_StringResources.resx.xml - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 234
2012-01-10 21:10:01 X.X.X.X GET /ContentHost/ClientBin/Settings.xml - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 203
2012-01-10 21:10:20 X.X.X.X POST /ServiceHost/Services/DataAccessService.svc - 443 - 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 401 2 5 17598
2012-01-10 21:10:28 X.X.X.X POST /ServiceHost/Services/DataAccessService.svc - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 404 0 0 8580
2012-01-10 21:11:01 X.X.X.X GET /ContentHost/ClientBin/en/Settings.xml - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 404 0 2 0
2012-01-10 21:11:01 X.X.X.X POST /ServiceHost/Services/DataAccessService.svc - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 404 0 0 203
2012-01-10 21:11:06 X.X.X.X GET /ContentHost/ClientBin/RequestOfferingSilverlightModule.xap - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 171
2012-01-10 21:11:06 X.X.X.X GET /ContentHost/ClientBin/FormControls.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 125
2012-01-10 21:11:06 X.X.X.X GET /ContentHost/ClientBin/en/Settings.xml - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 404 0 2 0
2012-01-10 21:11:06 X.X.X.X GET /ContentHost/ClientBin/Microsoft.Practices.ServiceLocation.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 234
2012-01-10 21:11:06 X.X.X.X GET /ContentHost/ClientBin/Microsoft.Practices.Unity.Silverlight.zip - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 304 0 0 234
2012-01-10 21:11:08 X.X.X.X POST /ServiceHost/Services/DataAccessService.svc - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 404 0 0 203
2012-01-10 21:12:36 X.X.X.X GET /ContentHost/ClientBin/en/Settings.xml - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 404 0 2 0
2012-01-10 21:12:37 X.X.X.X POST /ServiceHost/Services/DataAccessService.svc - 443 domain\user 2002:4acb:cb4f:8000:0:5efe:X.X.X.X Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 404 0 0 203

Cannot connect to the service manager portal wcf service

Hi Guys,
I'm having some issues with a fresh installation of the Service Manager 2012 Web Portal where I get the above message. Things I haved tried from reading other forum posts here:
I've increased the maxStringContentLength value to 2457600
Added HTTP bindings to Service Manager Portal (HTTP port 448) and SCSMWebContentServer (HTTP port 447)
Added the FQDN to web.config in ContentHost
ensured that web.config in ServiceHost has matching "DefaultHttpsBinding" throughout and "DefaultHttpsServiceBehavior" throughout
I can access /ServiceHost/Services/DataAccessService.svc without issue
I can access the SMPortal without issue, it just comes up with the above. Would anyone have any ideas?
Thanks
Lewis

Sometimes if you don't have enough memory it can cause that error. I have seen that a couple of times. The first was because it was just a demo server and only had 4Gb RAM.
If you visit the page http(s)://servername:SMSSPPort/ServiceHost/Services/DataAccessService.svc what error do you get?

Cannot connect to the Service Manager portal WCF service...again

I've ran into this error a few times now, but I have usually been able to fix it. This time its being more stubborn.
This is a brand new 2012 R2 portal running on a brand new SharePoint 2010 SP1 two server farm. The web content server is installed on both of the webservers just like Travis has it in this blog: http://blogs.technet.com/b/servicemanager/archive/2012/05/04/how-to-configure-the-self-service-portal-sharepoint-site-or-the-web-content-server-for-load-balancing.aspx
We have it F5 load balanced with a 3rd party cert which is working fine. We get to the site and the app loads, but instead of seeing the only catalog item I have published, I see the red error at the bottom stating that it cannot connect to the WCF service.
I've double checked all my bindings in IIS and the web.config. When I look in the web server event log I see this:
System.ServiceModel 3.0.0.0 Event ID 3
WebHost failed to process a request. Sender Information: System.ServiceModel.Activation.HostedHttpRequestAsyncResult/37916227 Exception: System.Web.HttpException: The service '/ServiceHost/Services/DataAccessService.svc' does not exist. ---> System.ServiceModel.EndpointNotFoundException: The service '/ServiceHost/Services/DataAccessService.svc' does not exist. at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.HandleRequest() at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.BeginRequest() --- End of inner exception stack trace --- at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) Process Name: w3wp Process ID: 3004
The SMPortalTrace.log isnt being very helpful, but heres a copy of it:
Error,2014-06-20 13:19:22.8784441,System.Reflection.TargetInvocationException: [Arg_TargetInvocationException]
Arguments:
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.00&File=mscorlib.dll&Key=Arg_TargetInvocationException ---> System.ServiceModel.CommunicationException: [HttpWebRequest_WebException_RemoteServer]
Arguments: NotFound
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer ---> System.Net.WebException: [HttpWebRequest_WebException_RemoteServer]
Arguments: NotFound
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer ---> System.Net.WebException: [HttpWebRequest_WebException_RemoteServer]
Arguments: NotFound
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer
at System.Net.Browser.BrowserHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
at System.Net.Browser.BrowserHttpWebRequest.<>c__DisplayClassa.<EndGetResponse>b__9(Object sendState)
at System.Net.Browser.AsyncHelper.<>c__DisplayClass4.<BeginOnUI>b__1(Object sendState)
--- End of inner exception stack trace ---
at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
at System.Net.Browser.BrowserHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult result)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.ServiceManager.Portal.ServiceCatalogSilverlightModule.Models.DataProvider.<>c__DisplayClass1.<FetchAllServiceOfferings>b__0(Object sender, AsyncDataCommandCompletedEventArgs`1 e)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.AsyncDataCommandBase`2.<>c__DisplayClass2.<CompleteCommand>b__0(Object )
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, Boolean useFastPath, Delegate d, Object[] args)
at System.Windows.Threading.DispatcherSynchronizationContext.Send(SendOrPostCallback d, Object state)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.AsyncDataCommandBase`2.CompleteCommand(Object sender, AsyncDataCommandCompletedEventArgs`1 e)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.AsyncDataCommandBase`2.OnCommandCompleted(Object sender, Exception exception)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataGatewayBase.CompleteAsyncDataCommandWithError(AsyncDataCommand command, Exception exception)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.ProxyDataGateway.ProxyExecuteCompletedHandler(Object sender, ExecuteCompletedEventArgs e)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.ProxyDataGateway.<>c__DisplayClass4.<GetClientProxy>b__3(Object sender, ExecuteCompletedEventArgs args)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.OnExecuteCompleted(Object state)
Error,2014-06-20 13:23:12.7295391,System.Reflection.TargetInvocationException: [Arg_TargetInvocationException]
Arguments:
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.00&File=mscorlib.dll&Key=Arg_TargetInvocationException ---> System.ServiceModel.CommunicationException: [HttpWebRequest_WebException_RemoteServer]
Arguments: NotFound
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer ---> System.Net.WebException: [HttpWebRequest_WebException_RemoteServer]
Arguments: NotFound
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer ---> System.Net.WebException: [HttpWebRequest_WebException_RemoteServer]
Arguments: NotFound
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer
at System.Net.Browser.BrowserHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
at System.Net.Browser.BrowserHttpWebRequest.<>c__DisplayClassa.<EndGetResponse>b__9(Object sendState)
at System.Net.Browser.AsyncHelper.<>c__DisplayClass4.<BeginOnUI>b__1(Object sendState)
--- End of inner exception stack trace ---
at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
at System.Net.Browser.BrowserHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult result)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.ServiceManager.Portal.ServiceCatalogSilverlightModule.Models.DataProvider.<>c__DisplayClass1.<FetchAllServiceOfferings>b__0(Object sender, AsyncDataCommandCompletedEventArgs`1 e)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.AsyncDataCommandBase`2.<>c__DisplayClass2.<CompleteCommand>b__0(Object )
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, Boolean useFastPath, Delegate d, Object[] args)
at System.Windows.Threading.DispatcherSynchronizationContext.Send(SendOrPostCallback d, Object state)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.AsyncDataCommandBase`2.CompleteCommand(Object sender, AsyncDataCommandCompletedEventArgs`1 e)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.AsyncDataCommandBase`2.OnCommandCompleted(Object sender, Exception exception)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataGatewayBase.CompleteAsyncDataCommandWithError(AsyncDataCommand command, Exception exception)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.ProxyDataGateway.ProxyExecuteCompletedHandler(Object sender, ExecuteCompletedEventArgs e)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.ProxyDataGateway.<>c__DisplayClass4.<GetClientProxy>b__3(Object sender, ExecuteCompletedEventArgs args)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.OnExecuteCompleted(Object state)
Any ideas?
- Get on the floor, do that dinosaur

For me I can reach it via the direct server name,
https://Server:444/ServiceHost/Services/DataAccessService.svc works and displays a page
But it fails when trying to go to the load balanced name:
https://SelfService.blah.com:444/ServiceHost/Services/DataAccessService.svc Fails
When I use IE11 and do a network check it shows its getting a 404 error on /ContentHost/ClientBin/ServiceCatalogSilverlightModule.xap.
Network guys who configured the F5 can't see any network issues blocking the request. The F5 isn't doing SSL offloading, certificate is on the software portal server.

Every device (iphone4, iphone4s, ipad2) I try to hook up to iTunes gives me a message "this device cannot connect because the apple mobile device service is not setup" does anyone have ideas as to why it keeps popping up? It just started doing this.

Every device (iphone4, iphone4s, ipad2) I try to hook up to iTunes gives me a message "this device cannot connect because the apple mobile device service is not setup" does anyone have ideas as to why it keeps popping up? It just started doing this.

I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Service Manager Portal not displaying VM console and related details

Hi All,
We have deployed private cloud with system center products using Cloud Services Process Pack and we have deployed Service Manger portal for VM provisioning in Cloud
The Service Manger portal does not display VM console and VM details
I have following queries
How to take remote console of VM deployed by end user through service manager portal
How will user come to know quota limit utilized in cloud under his account
The VM are deployed through SCSM portal are in shutdown state how to auto start the VM after provisioning
Please help since we are not able to find any solution for the above
Appreciate if any workaround is available for the same
Thanks
Manzoor Ahmed

The component of System Center that is capable to give console access to your VMs, is App Controller.
Once the user are logged in here, they should see their quota, limits and resources available.
Yes, the VMs are powered off by default when using the CSPP. You can edit the runbooks and add a task that will start them after provisioning.
For your information:
Many things has changed since the release of Cloud Service Process Pack. A new set of tools are provided with Windows Azure Pack to have a streamlined Infrastructure as a Service offering within the enterprise. Windows Azure Pack will leverage VMM (in the
same way as SCSM does) but in conjunction with SPF (component within Orchestrator) to give you a framework that is identical to Windows Azure (Microsoft's own cloud) running on-premise.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Additional language in Service Manager Portal

Hello,
I have two questions.
1.) Is it possible to add additional language to Service Manager Portal, not only the official 21 languages. I mean the first page, the silverlight part. I know, I can modify file SilverlightModule_StringResources.resx.xml (english file) and I got desired
result, but I need English language too. So I would like to know if is it possible to add additional language.
2.) When I select "Create a request" on the first page, I always got "Generic Incident Request (EN)" regardless the language I used. I got the same English Generic IR also if My language is German, Russian or any other. Is it possible
to change the default link to another Incident Request?
Thanks and BR.

Scripting or coding doesn't work with extending the Silverlight webpart. The source code of the Silverlight webpart isn't available by Microsoft. So you can't modify the code of the Silverlight webpart.
Also it's not supported by Microsoft to modify the Silverlight webpart and it maybe causes trouble with upcoming updates on the webpart as well.
"Please don't shoot the messenger ;-)"
Andreas Baumgarten | H&D International Group

Service MAnager Portal _CreateMOMRegKey

Dear All,
I had to uninstall SM Portal ( to allow SCOM agent installation) and now re-installing the portal.
However I'm stuck at the error -
"An error occurred while executing a custom action:_CreateMOMRegKey.11EE91AB_EABF_48A6_9973_4DCD73190AC6"
This was the same issue, which had occurred when installing the first time. It was due to permissions.
However not sure, why this is recurring, as I'm re-installing with the service account with all the required permissions sorted out.
Can Microsoft be ever bug free ? OR is MS trying to use the public as their test agents after paying for their products?
Can anyone help fix this issue.. I'm bugged up using the MS products.

Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.CreateMOMRegKey
CreateMOMRegKey: Generating secure key for Primary SDK
CreateMOMRegKey: Error: Exception of type 'Microsoft.EnterpriseManagement.Security.KeyNotInSyncException' was thrown.
StackTrace: at Microsoft.EnterpriseManagement.Security.SecureStorageManager.Initialize()
at Microsoft.MOMv3.Setup.MOMv3ManagedCAs.CreateMOMRegKey(Session session)
MSI (s) (E4:50) [12:22:15:324]: NOTE: custom action _CreateMOMRegKey.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
Action start 12:21:49: RegisterMIMEInfo.
MSI (s) (E4:40) [12:21:49:857]: Doing action: WriteRegistryValues
Action ended 12:21:49: RegisterMIMEInfo. Return value 0.
Action start 12:21:49: WriteRegistryValues.
MSI (s) (E4:40) [12:21:52:025]: Doing action: _Set_CreatePortalWebSite.11EE91AB_EABF_48A6_9973_4DCD73190AC6
Action ended 12:21:52: WriteRegistryValues. Return value 1.
MSI (s) (E4:40) [12:21:52:029]: PROPERTY CHANGE: Adding _CreatePortalWebSite.11EE91AB_EABF_48A6_9973_4DCD73190AC6 property. Its value is 'SCSMWebContentServer
443 C:\inetpub\wwwroot\System Center Service Manager Portal\
KMDCLSCSM1003.PREKMDCLOUD.DK, OU=*, O=KMD A/S, L=*, S=*, C=DK
PREKMDCLOUD2\SA_SCSP 7Rm7R6iy'.
Action start 12:21:52: _Set_CreatePortalWebSite.11EE91AB_EABF_48A6_9973_4DCD73190AC6.
MSI (s) (E4:40) [12:21:52:029]: Doing action: _CreatePortalWebSite.11EE91AB_EABF_48A6_9973_4DCD73190AC6
Action ended 12:21:52: _Set_CreatePortalWebSite.11EE91AB_EABF_48A6_9973_4DCD73190AC6. Return value 1.
Action start 12:21:52: _CreatePortalWebSite.11EE91AB_EABF_48A6_9973_4DCD73190AC6.
MSI (s) (E4:40) [12:21:52:112]: Doing action: _Set_CreateMOMRegKey.11EE91AB_EABF_48A6_9973_4DCD73190AC6
Action ended 12:21:52: _CreatePortalWebSite.11EE91AB_EABF_48A6_9973_4DCD73190AC6. Return value 1.
Action start 12:21:52: _Set_CreateMOMRegKey.11EE91AB_EABF_48A6_9973_4DCD73190AC6.
MSI (s) (E4:40) [12:21:52:117]: Doing action: _CreateMOMRegKey.11EE91AB_EABF_48A6_9973_4DCD73190AC6
Action ended 12:21:52: _Set_CreateMOMRegKey.11EE91AB_EABF_48A6_9973_4DCD73190AC6. Return value 1.
Action start 12:21:52: _CreateMOMRegKey.11EE91AB_EABF_48A6_9973_4DCD73190AC6.
MSI (s) (E4:40) [12:21:52:201]: Doing action: _Set_InstallInprocSDKPerfCounters.11EE91AB_EABF_48A6_9973_4DCD73190AC6
Action ended 12:21:52: _CreateMOMRegKey.11EE91AB_EABF_48A6_9973_4DCD73190AC6. Return value 1.
MSI (s) (E4:40) [12:21:52:204]: PROPERTY CHANGE: Adding _InstallInprocSDKPerfCounters.11EE91AB_EABF_48A6_9973_4DCD73190AC6 property. Its value is 'C:\inetpub\wwwroot\System Center Service Manager Portal\ServiceHost\Bin\Microsoft.EnterpriseManagement.DataAccessService.Core.dll'.
Action start 12:21:52: _Set_InstallInprocSDKPerfCounters.11EE91AB_EABF_48A6_9973_4DCD73190AC6.
MSI (s) (E4:40) [12:21:52:204]: Doing action: _InstallInprocSDKPerfCounters.11EE91AB_EABF_48A6_9973_4DCD73190AC6
Action ended 12:21:52: _Set_InstallInprocSDKPerfCounters.11EE91AB_EABF_48A6_9973_4DCD73190AC6. Return value 1.
Action start 12:21:52: _InstallInprocSDKPerfCounters.11EE91AB_EABF_48A6_9973_4DCD73190AC6.
MSI (s) (E4:40) [12:21:52:288]: Doing action: _Set_RegisterAspNet4OnIIS.11EE91AB_EABF_48A6_9973_4DCD73190AC6
Action ended 12:21:52: _InstallInprocSDKPerfCounters.11EE91AB_EABF_48A6_9973_4DCD73190AC6. Return value 1.
MSI (s) (E4:40) [12:21:52:292]: PROPERTY CHANGE: Adding _RegisterAspNet4OnIIS.11EE91AB_EABF_48A6_9973_4DCD73190AC6 property. Its value is 'C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe
-iru'.
Action start 12:21:52: _Set_RegisterAspNet4OnIIS.11EE91AB_EABF_48A6_9973_4DCD73190AC6.
MSI (s) (E4:40) [12:21:52:292]: Doing action: _RegisterAspNet4OnIIS.11EE91AB_EABF_48A6_9973_4DCD73190AC6
Action ended 12:21:52: _Set_RegisterAspNet4OnIIS.11EE91AB_EABF_48A6_9973_4DCD73190AC6. Return value 1.
Action start 12:21:52: _RegisterAspNet4OnIIS.11EE91AB_EABF_48A6_9973_4DCD73190AC6.
MSI (s) (E4:40) [12:21:52:371]: Doing action: _Set_AddWCSWindowsFirewallPortException.11EE91AB_EABF_48A6_9973_4DCD73190AC6
Action ended 12:21:52: _RegisterAspNet4OnIIS.11EE91AB_EABF_48A6_9973_4DCD73190AC6. Return value 1.
MSI (s) (E4:40) [12:21:52:375]: PROPERTY CHANGE: Adding _AddWCSWindowsFirewallPortException.11EE91AB_EABF_48A6_9973_4DCD73190AC6 property. Its value is '443
Service Manager (Web Content Server)
0'.
Action start 12:21:52: _Set_AddWCSWindowsFirewallPortException.11EE91AB_EABF_48A6_9973_4DCD73190AC6.
MSI (s) (E4:40) [12:21:52:375]: Doing action: _AddWCSWindowsFirewallPortException.11EE91AB_EABF_48A6_9973_4DCD73190AC6
Action ended 12:21:52: _Set_AddWCSWindowsFirewallPortException.11EE91AB_EABF_48A6_9973_4DCD73190AC6. Return value 1.
Action start 12:21:52: _AddWCSWindowsFirewallPortException.11EE91AB_EABF_48A6_9973_4DCD73190AC6.
MSI (s) (E4:40) [12:21:52:387]: Doing action: _Set_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
Action ended 12:21:52: _AddWCSWindowsFirewallPortException.11EE91AB_EABF_48A6_9973_4DCD73190AC6. Return value 1.
MSI (s) (E4:40) [12:21:52:391]: PROPERTY CHANGE: Adding _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 property. Its value is 'PREKMDCLOUD2
SA_SCSP'.
Action start 12:21:52: _Set_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6.
MSI (s) (E4:40) [12:21:52:392]: Doing action: _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
Action ended 12:21:52: _Set_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6. Return value 1.
Action start 12:21:52: _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6.
MSI (s) (E4:2C) [12:22:08:418]: NOTE: custom action _CreatePortalWebSite.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
MSI (s) (E4:40) [12:22:08:420]: Executing op: ActionStart(Name=_CreateMOMRegKey.11EE91AB_EABF_48A6_9973_4DCD73190AC6,,)
CreateWebSite: Saving ContentHost web config changes
MSI (s) (E4:40) [12:22:08:453]: Executing op: CustomActionSchedule(Action=_CreateMOMRegKey.11EE91AB_EABF_48A6_9973_4DCD73190AC6,ActionType=17409,Source=BinaryData,Target=CreateMOMRegKey,)
MSI (s) (E4:50) [12:22:08:477]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI2C57.tmp, Entrypoint: CreateMOMRegKey
CAPACK: Extracting custom action to temporary directory: C:\Windows\Installer\MSI2C57.tmp-\
CAPACK: CLR version v2.0.50727 is installed.
CAPACK: CLR version v2.0.50727 is detected.
CAPACK: CLR version v4.0.30319 is installed.
CAPACK: CLR version v4.0.30319 is detected.
CAPACK: Binding to CLR version v2.0.50727
Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.CreateMOMRegKey
CreateMOMRegKey: Generating secure key for Primary SDK
CreateMOMRegKey: Error: Exception of type 'Microsoft.EnterpriseManagement.Security.KeyNotInSyncException' was thrown.
StackTrace: at Microsoft.EnterpriseManagement.Security.SecureStorageManager.Initialize()
at Microsoft.MOMv3.Setup.MOMv3ManagedCAs.CreateMOMRegKey(Session session)
MSI (s) (E4:50) [12:22:15:324]: NOTE: custom action _CreateMOMRegKey.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _CreateMOMRegKey.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (E4:40) [12:22:15:493]: Executing op: ActionStart(Name=_CreateMOMRegKey.11EE91AB_EABF_48A6_9973_4DCD73190AC6,,)
MSI (s) (E4:40) [12:22:15:500]: Executing op: ProductInfo(ProductKey={79A76AB5-3EA0-4C4F-89B9-1CA00438EC2E},ProductName=Microsoft System Center 2012 - Service Manager,PackageName=SM.msi,Language=0,Version=117771097,Assignment=1,ObsoleteArg=0,ProductIcon=ServiceManager.ico,,PackageCode={1B3B79AF-1391-4E6E-9BE2-2BD0832DADE7},,,InstanceType=0,LUASetting=0,RemoteURTInstalls=0,ProductDeploymentFlags=3)
MSI (s) (E4:40) [12:22:15:509]: Executing op: ActionStart(Name=_CreatePortalWebSite.11EE91AB_EABF_48A6_9973_4DCD73190AC6,Description=Creating self-service web content portal,)
MSI (s) (E4:40) [12:22:15:516]: Executing op: ActionStart(Name=WriteRegistryValues,Description=Writing system registry values,Template=Name: [2], Value: [3])
MSI (s) (E4:40) [12:22:15:519]: Executing op: RegOpenKey(Root=-2147483646,Key=SYSTEM\CurrentControlSet\Services\Eventlog\Operations Manager\Database Modules,,BinaryType=1,,)
MSI (s) (E4:40) [12:22:15:523]: Executing op: RegRemoveValue(Name=EventSourceFlags,Value=#0,)
MSI (s) (E4:40) [12:22:15:529]: Executing op: RegCreateKey()
MSI (s) (E4:40) [12:22:15:534]: Executing op: RegRemoveValue(Name=EventMessageFile,,)
MSI (s) (E4:40) [12:22:15:566]: Executing op: RegRemoveKey()
MSI (s) (E4:40) [12:22:15:566]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Operations Manager\Database Modules 3: 2
MSI (s) (E4:40) [12:22:15:574]: Executing op: RegOpenKey(Root=-2147483646,Key=SYSTEM\CurrentControlSet\Services\Eventlog\Operations Manager\System Center Virtual Machine Manager Connector,,BinaryType=1,,)

My Ipad will not connect with Itunes prompt states this Ipad cannot connect because the Apple mobile device service has not started "??s "This Ipad cannot connect

my Ipad will not connect with Itunes prompt states this Ipad cannot connect because the Apple mobile device service has not started "??s "

Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

Error occured while performing nmConnect : Cannot connect to Node Manager.

Hi There,
I am trying to connect to my node manager via WLST, however when I try to do so I get the following exception:
WLSTException: Error occured while performing nmConnect : Cannot connect to Node Manager. : Read channel closed
I have searched Google for the reason behind this exception, but I couldnt find anything that explains why I am getting it.
Could someone help me out? All I want to do is connect to the node manager and then kill one of the nodes.
I should point out that the AdminServer and the node are the same machine.

The nodemanager will not accept SSL connections, I checked the config on WL itself.
I can confirm that it is also in nodemanager.domains
I have restarted the service and also bounced the box, but this hasnt helped. I get the following when running this command:
<27-May-2013 14:08:43 o'clock CEST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<27-May-2013 14:08:43 o'clock CEST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
Should it be going through all of this if I am trying to connect with plain text?

Add failed. [4911] Cannot connect to License Manager

Hello
I am facing a strange problem with our CCM, i cant add new phones (auto registration or manual add) although i still have 82 DLU's free
Always getting the error Add failed. [4911] Cannot connect to License Manager
I have tried restarting the Call Manager servral times and still same error appears
can anyone help ?

Hi mpagacz
I have checked the license manager service and it was the problem , it wouldn't start but i wasnt related to hardware issue
I found out from other community that it is a bug in my version 7.1.3 that when license exceeded certain limit that license service doesn't work
so i resolved the issue by deleting some licenses files
Also this issue was reported solved in 7.1.5 so i and doing the upgrade
anyway i have bought version 10.5 and will do the migration
thanks

WLSTException: Cannot connect to Node Manager

Hello,
I am trying to connect to my nodemanager via the WLST rather than the service and get the following error. (I am using custom keystores instead of Demo)
wls:/offline> nmConnect('weblogic','1234',' xx.xx.xx ','5556','base_domain',':/Oracle/Middleware/user_projects/domains/base_domain','ssl')
Connecting to Node Manager ...
<Oct 17, 2012 4:52:38 PM PDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certifica
te parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. -For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Un
supported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupp
orted OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Warning> <Security> <BEA-090542> <Certificate chain received from xx.xx.xx - yy.yy.yy.yy was not trusted causing SSL handshake failure. Check the certificate chain to determine if it should be trusted or not. If it should be trusted, then update the client trusted CA configurati
on to trust the CA certificate that signed the peer certificate chain. If you are connecting to a WLS server that is using demo certificates (the default WLS se
rver behavior), and you want this client to trust demo certificates, then specify -Dweblogic.security.TrustKeyStore=DemoTrust on the command line for this client.>
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 123, in nmConnect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing nmConnect : Cannot connect to Node Manager. : [Security:090542]Certificate chain received from xx.xx.xx - yy.yy.yy.yy was not trusted causing SSL handshake failure. Check the certificate chain to determine if it should be trusted or not. If it should be trusted, then update the client trusted CA configuration to trust the CA certificate that signed the peer certificate chain. If you are connecting to a WLS server that is using demo certificates (the default WLS server behavior), and you want this client to trust demo certificates, then specify -Dweblogic.security.TrustKeyStore= DemoTrust on the command line for this client.
Thanks..

Yes Node Manager is running fine. I was able to overcome the above error, by using the following parameters while running Weblogic.WLST:
"java -Dweblogic.security.TrustKeyStore=CustomTrust -Dweblogic.security.CustomTrustKeyStoreFileName=<name>.jks weblogic.WLST"
Thanks,

Grid installtion failing with error Cannot connect to Node Manager. : Conf

I am trying to install Grid, however its failing with following error
I installed Weblogic server 10.3.4 and 11g R2 database
==============================================================
Code of Exception: Error occured while performing nmConnect : Cannot connect to Node Manager. : Configuration error while reading domain directory
Use dumpStack() to view the full stacktrace
Thu Mar 03 21:49:03 IST 2011
<traceback object at 1>
Connecting to Node Manager ...
This Exception occurred at Thu Mar 03 21:49:03 IST 2011.
Thu Mar 03 21:49:03 IST 2011
SEVERE: Exception: during stop of admin server
Thu Mar 03 21:49:03 IST 2011
Name of Exception: main.WLSTException
Thu Mar 03 21:49:03 IST 2011
Code of Exception: Error occured while performing nmConnect : Cannot connect to Node Manager. : Configuration error while reading domain directory
Use dumpStack() to view the full stacktrace
Thu Mar 03 21:49:03 IST 2011
<traceback object at 2>
Connecting to Node Manager ...
This Exception occurred at Thu Mar 03 21:49:03 IST 2011.
Thu Mar 03 21:49:03 IST 2011
Node Manager is not running
Mar 3, 2011 9:49:03 PM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil execCommand
INFO: error messages of the command :
weblogic.nodemanager.NMException: Configuration error while reading domain directory
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:301)
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:249)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:200)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:206)
at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:53)
at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:179)
at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx2.nmConnect$3(<iostream>:118)
at org.python.pycode._pyx2.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.pycode._pyx41.stopManagedServer$6(/u02/oracle/Oracle/Middleware/oms11g/sysman/omsca/scripts/wls/start_server.py:142)
at org.python.pycode._pyx41.call_function(/u02/oracle/Oracle/Middleware/oms11g/sysman/omsca/scripts/wls/start_server.py)
at org.python.core.PyTableCode.call(Unknown Source)

I am still getting error, even after installing Weblogic server 10.3.2
ar 4, 2011 10:44:42 AM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil execCommand
INFO: error messages of the command :
weblogic.nodemanager.NMConnectException: Connection refused. Could not connect to NodeManager. Check that it is running at node1.slksoft.com:7,403.
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:525)
at weblogic.nodemanager.client.SSLClient.createSocket(SSLClient.java:38)
at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:227)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:199)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:205)
at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:52)
at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:175)
at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:168)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
and also i am getting below error.
oracle@node1 grid]$ export ORACLE_SID=prod
[oracle@node1 grid]$ emctl status agent
EM Configuration issue. /u01/oracle/product/11.2.0/db_1/node1.soft.com_prod not found.
[oracle@node1 grid]$

[SOLVED] "No connection to service manager" when enabling services

Following the wiki, trying to convert one of my Arch boxes to pure systemd. At step five ( https://wiki.archlinux.org/index.php/Sy … stallation ) where I am supposed to enable units to replace the daemons from rc.conf I hit a brick wall. Basically any time I use the systemctl command I get the message "No connection to service manager"
So running:
# systemctl status dbus
returns:
Failed to get D-Bus connection: No connection to service manager.
Any idea what is going on?
Last edited by marko2010 (2012-08-17 02:34:42)

I have this same error:
# systemctl -a
Failed to get D-Bus connection: No connection to service manager.
# systemctl enable syslog-ng.service
ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/syslog.service'
ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/multi-user.target.wants/syslog-ng.service'
[root@FX-8120 etc]# systemctl start syslog-ng
Failed to get D-Bus connection: No connection to service manager.
[root@FX-8120 etc]#
# uname -a
Linux FX-8120 3.8.4-1-ARCH #1 SMP PREEMPT Wed Mar 20 22:10:25 CET 2013 x86_64 GNU/Linux
# pacman -Q systemd
systemd 198-1
I can't remove initscript becouse more demons don't work propely with systemd like network, cond, aiccu, cpufreq, spamd, teamspeak3-server, etc....
Have you any idea why don;t work statu option systemctl?
Last edited by batot (2013-03-26 07:47:05)

Cannot connect to service manager portal wcf service

Similar Messages

Maybe you are looking for