Cannot connect to shares after upgrade to Tiger

Hi,
I work at an IT company that manages both Macs and PCs. We just performed a site-wide upgrade for one of our clients from 10.3.9 to 10.4.6 (and on to 10.4.9).
We have 2 iBooks, a PowerMac, and 2 iMacs in an Active Directory setup. One of the iMacs already had a clean install of Tiger on it and it works fine, but the others have stopped connecting. I have since upgraded the desktops to 10.4.9, but the problem is still there.
Specifically, when connecting to any PC share (Win2000 and Win2003 server) using SMB, the Connect button will not respond. When browsing using the Finder, the computers are all listed (possibly cached from the previous installation?) but when I try to connect to them it says that their aliases are broken.
Also, the desktops have a simple logon Applescript that attempts to mount the server's public share (using 'mount volume'). This stopped working with an 'error -36' message after the upgrade, which I believe relates to there being network issues.
Any ideas?
iBook, PowerMac, iMac Mac OS X (10.4.9) Problem also occurs with 10.4.6

The server is actually 2003, with the desktops all being 2000. I went in to the local policy and I believe you're referencing these items -
Domain Controller Local Policy
Disabled - Domain member: Digitally encrypt or sign secure channel data (always)
Disabled - Domain member: Digitally encrypt secure channel data (when possible)
Disabled - Domain member: Digitally sign secure channel data (when possible)
Domain Local Policy
Not Defined - Domain member: Digitally encrypt or sign secure channel data (always)
Not Defined - Domain member: Digitally encrypt secure channel data (when possible)
Not Defined - Domain member: Digitally sign secure channel data (when possible)
Are these the correct items to change?
Also to note, we do have a fresh install of Tiger on an iMac and it's able to browse and connect to all shares on the network perfectly fine; it's just the upgraded Macs that are now encountering issues.

Similar Messages

Cannot Connect to Server after Upgrade

After performing several MS upgrades from MS site, the following error occurs when trying to connect to my local (single computer) Database
Engine using SQL Server Express 2008 Express:
TITLE: Connect to Server
Cannot connect to SR1320NX\SQLEXPRESS.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not
found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
Note that one of the MS upgrades performed was for
Microsoft SQL Server 2008 Service Pack 3 (KB2546951).
Additionally, some of the upgrades did not initially install correctly, although they all eventually did install correctly.
The following is my SQL Server 2008 Express configuration:
Microsoft SQL Server Management Studio
10.0.5500.0
Microsoft Data Access Components (MDAC)
3.85.1132
Microsoft MSXML
2.6 3.0 4.0 6.0
Microsoft Internet Explorer
8.0.6001.18702
Microsoft .NET Framework
2.0.50727.3649
Operating System
5.1.2600
And my operating system:
Microsoft Windows XP, Home Edition, Version 2002, Service Pack 3

try below links for troubleshooting.
http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/
http://social.technet.microsoft.com/wiki/contents/articles/2102.how-to-troubleshoot-connecting-to-the-sql-server-database-engine.aspx
http://stackoverflow.com/questions/360141/how-to-connect-to-local-instance-of-sql-server-2008-express
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
Praveen Dsa | MCITP - Database Administrator 2008 |
My Blog | My Page

Cannot connect to oracle after upgrade to 9i

Hey there,
kind of new in the arena so be kind and patient with me please.
Enviroment : sun
oracle : 8.0.5 now been upgraded to 9i with 8.0.5 clients installed on the machine
symptoms : since upgrading the Oracle to 9i we cannot connect to the 9i with jdbc
Question : Do we need to upgrade the client in our machines to 9i clients? is there any specific Driver Manager that I should use currently using Thin client thruogh port 1521?
HELP!!!!

First of all, there is not enough specifics in your
post, the problem could be anywhere - you should
provide at least an error message, an exception call
stack or something like this.
It could be a problem with the jar files provided by
oracle, which are in you client's class path. It used
to be called classesXXX.zip in oracle 8i, whatever the
name in oracle 9 is I do not know. But just make sure
that you have the exact oracle jar files in the class
path as the ones shipped with your oracle version.
Usually these files are found in
$ORACLE_HOME/jdbc/lib
I'll try to be more specific:
I use an 8.0.5 client and I'm trying to connect to a 9i .I didn't upgrade the client yet.While trying to connect via a connection pool that i built.I get an exception saying exceeding key size in method getConnection.
java.sql.SQLException: Exceding key size
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:420)
at oracle.jdbc.ttc7.O3log.<init>(O3log.java:255)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:166)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:103)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:148)
My qustions are :
Is it because I didn't upgrade the client?(Though it only seems logical that the 9i would support it)
If it isn't because of the client what is it?

Strong wifi connection but cannot connect to Internet after upgrade to ios5

After upgrade to ios 5, my iPad 2 connect to the wireless router just fine. However, it take forever to connect to a website. Following suggestion from someone, I switch my router off then on, it work. But after a day, the problem came back. Switch off and on the router solve the problem again..
This connection problem appear periodically since, it is very annoying.
Anyone know the reason for this connection problem and any solution?. thanks a lot.
My iPad 2 work just fine under 4.3.5!

Forgot to say, my iPhone 4 work just fine after upgrade to iOS 5.

Cannot connect to internet after upgrade from 10.7.4 to 10.7.5

I have a new iMac and connect to internet with a data card (modem) Huawei E303.
It worked fine until after the upgrade from 10.7.4 to 10.7.5.
Now I can connect but there is no measurable signal. Other computers work using the same data card.

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
For 10.5/10.6/10.7, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

Cannot Connect to VPN After License Upgrade

Hello,
I am having an issue where I can't connect to VPN after upgrading the license.
The license upgraded is related to AnyConnect VPN.
I noticed from the newly upgraded license, the Encryption-3DES-AES is disabled whereas previously it was enabled.
Could it be the cause of the issue?
ASA 5512-K9
Version 8.6(1)2
Thank you in advance.
Regards,
Zul

Hello,
It is,
here you have the link to request it for free
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=139
Regards

VPN Server broken with Windows after upgrade from Tiger.

Hey there
I use Tiger 10.4 Server on a PowerMac G4.
It has two network interfaces, one public facing with it's own static IP, and the other internal facing.
The VPN service works perfectly, and allows people to connect via L2TP and assignes them an IP on the internal facing subnet, and allows OS X and Windows clients to connect.
However after upgrading to Leopard, only Mac clients can connect, all the Windows clients connect, and although they get an IP and are able to ping destinations, attempts to connect to these destinations (some of which are web apps on port 80, others are file servers running Samba), they just sit waiting for ever.
I've experimented with this problem, and it appears to be a problem with MTU and packet fragmentation, however these settings appear to be the same between Tiger, which worked, and Leopard which does not work.
Does anyone have any experience with the new VPN Server in Leopard, and can offer me any advice on how to fix this problem? I'm currently downgraded to Tiger again until a fix can be found.

I had the same issue, among others, but I finally got everything to work eventually. It seems that if the IP range of the client connecting to VPN is in the same range of the server LAN, there will be connectivity issues, whether it be pcs and/or macs not being able to connect. The following set up got my VPN services working:
1. Get DNS and Open Directory working properly. When I did an upgrade, the Server Admin updated my zone files with a curious extra space, which killed DNS. For example, I had the name server as ns.company.private., but in the files it would say ns. company.private everywhere! I've been reading about various bugs in upgrading DNS, so I think it's best just to start DNS from scratch. But if you are upgrading, the following thread expalins how to go about setting up DNS and Open Directory: http://discussions.apple.com/thread.jspa?messageID=5957209&#5957209
2. Once you have Open directory users and dns working properly, then set up VPN. Give a unique IP range to the internal network (192.168.7.1/24) that other networks will not emulate. If you use 192.168.1.1, you will likely run into issues. You can always test this method out by changing the IP range from a remote location and trying to get in this way instead of changing the server. Also, be aware that if you use Gateway Assistant within NAT, it will automatically give you a 192.168.1.1/24 range, at least that's been my experience, and this always killed VPN for me. I would set up NAT manually to avoid problems.
3. Ensure that the DNS information under the Client Information tab is correct. For my server I have 192.168.9.1 as the nameserver, and company.private as the search domain. Then set up routing tables. Mine are 192.168.0.0:255.255.0.0 private and 0.0.0.0:0.0.0.0 public.
Also, when you restart the server, stop and restart VPN services, as there is some talk about the Tiger bug still being around, where VPN services are messed up upon startup. This all worked for me and a couple others that had similar server set ups. Hopefully this will work for you.

E4200 Can't see my network shares after upgrade

I can't see my network shares after upgrade altough everything works fine , the network scanner shows all the atatched devices but in Eplorer when I click Network there is nothing shown on two computers running Win7 64.
I did downgraded the firmware back to .01 but still no network .
Any help ?

After upgrading the firmware did you reset the E4200? After successful firmware upgrade you need to reset the router. It is recommended to reset the router once. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.
After reset, reconfigure the router and then check the connectivity status…

IPhoto library gone after upgrade to Tiger

My iPhoto library was empty after upgrading to Tiger. I am on my 4th digital camera, so you can imagine how many photos I can no longer find. What is worse, and I don't think there is anything worse, I can no longer see photos of my child who is deceased. I want my photos back!! Can anyone help. The "computer nerd" company that did our upgrade is of no help at all. They talk to me as if I knew anything about computers and I know nothing. Please help me.
Elizabeth,
Ray'sMom

Phil
Three separate issues then:
1. The files which are corrupt or a file format that Preview doesn't recognize
Some things to try:
Change the file suffix to .jpg (i.e lowercase) or .jpeg and see if that helps.
Download Graphic Coverter and try open them with it. Graphic Converter is a image editor, and frankly, if it won't open them, I doubt anything will.
2. "Unreadable Files: 1
The following could not be imported. (The file is in the iPhoto Library folder.)"?
iPhoto will not import files from the iPhoto Library Folder - it's a simple protection against duplication.
3. iPhoto fails to display any of these images at all.
Do you get a blank square in the iPhoto Window? What happens when you click on a pic to edit it in the iPhoto Window? Do you get a ? or a !
The ! or ? turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents. The most common cause of this is User Activity in the iPhoto Library Folder. Have you altered, moved or renamed anything in the iPhoto Library Folder?
If you haven't, then try rebuilding the database. Hold down the apple and option (or alt) keys and launch iPhoto. Use the resulting dialogue to rebuild. Choose the top three options.
If you want to start over:
To create and populate a new library:
Note this will give you a working library with the same film rolls and pictures as before, however, you will lose your albums, keywords, books, calendars etc.
Move the iPhoto Library Folder to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library Folder on your desktop and find the Originals folder. From the Originals folder drag the individual rolls to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library Folder on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

I cannot view my videos after upgrading to OSX

I cannot view my videos after upgrading to OSX. Each video I try to open the message on the black background is Blocked Plug-In. In system preferences I have the latest Java but Flash Player does not upgrade to Flash 12 after numerous attempts.

HI MortenEJ,
Thanks for your responce.but already done doing "Restore factory settings" .. and when Im doing "back up from" ..
I still encounter the same problem. I have important messages in my inbox I want to keep.
I even try to upgrade to the newest version. IOS 5.0.1. but still the same..My main problem is my contacts. I dont have "+" add contact button and inside each contact.. I dont have the "edit" button..

I cannot edit my contacts after upgrading to IOS5 .

I cannot edit my contacts after upgrading to IOS5 . I can restore to factory settings but I want to keep my messages as they were.. what can I do? please someone help.. thanks in advance.

HI MortenEJ,
Thanks for your responce.but already done doing "Restore factory settings" .. and when Im doing "back up from" ..
I still encounter the same problem. I have important messages in my inbox I want to keep.
I even try to upgrade to the newest version. IOS 5.0.1. but still the same..My main problem is my contacts. I dont have "+" add contact button and inside each contact.. I dont have the "edit" button..

ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
Any ideas on how to get the iPod recognized again in iTunes under Leopard?

Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

Who can shed some light on my ongoing connection problem. After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet. I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to

Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?

Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden

How to fix connecting to iTunes after upgrading to ios6

How do I connect to iTunes after upgrade to ios6

iTunes on your computer or the iTunes store?
 Cheers, Tom

Cannot connect to shares after upgrade to Tiger

Similar Messages

Maybe you are looking for