Cannot connect to Smart Tee input pin...

Hello i have some problem with the picture on my TV@nywhere card it actually started when i upgraded my DivX version 5 something too 6.2.2 ... The image is all black but i can still hear the sound And this message appear when i start Tv@anywhere plus " Cannot connect to Smart Tee input pin..."
Can someone please help me

No i was hoping i didnt need to... But i guess i have no choice

Similar Messages

Cannot connect to Smart Tee input pin... [Windows 7 64 bit]

Hi TV Tuner users! I need some help.
I've been searching on this forum and all over the web for a solution. I hope some of you guys might have a solution.
I have a TV @ anywhere Plus and run Windows 7. The card has previously worked but for the past few months it has malfunctioned.
When I start the TV @ anywhere recording software I get following errors:
"Cannot connect to Smart Tee input pin..."
"Cannot render audio renderer (5001)..."
"Cannot init Direct show interface... (1001)"
I have not made any major adjustments to the computers drivers or hardware. I've reinstalled and installed, and reinstalled different versions of the driver and software. I've even switched PCI port.
So I'm a bit confused. Anyone having an idea for a solution?
This guy (https://forum-en.msi.com/index.php?topic=124889.0) even formatted his harddrive. It's an old post, but maybe you've figured out something since that post?
Regards
Erling

No i was hoping i didnt need to... But i guess i have no choice

Smart Camera Input reads low

I have a 1722 Smart Camera. I can't get the inputs to read a "high" value. Other than this, my application works well.
I'm using the NI cable and screw-terminal block. If I jumper any of input 0 or 1 (pin 2 or 8) to +24V (pin5), still the inputs always read low, so I can never get past the step that waits for a "high" input before proceeding. I used the data monitor as well while applying the voltages, but they always read "0".
Note: the outputs also don't work; they always are at 24V even when set low (they have pullups to +24).
The LEDs though work fine when I turn them on and off.
What am I missing conceptually to have inputs read?
Solved!
Go to Solution.

1) Yes, it's the NI Vision I/O Terminal Block. The power supply is a high quality 24V, 5A MeanWell regulated supply going into the terminal block.
2) The system itself works well (inspections are passed/failed correctly), so I don't think it's the power supply connection. However, the power supply is connected to the +24V and ground terminals on the block (pin 5 and 15, I believe from memory)
3) I tried reading a few different ways. (a) the Test Panel, which comes up when I double click the I/O logic block in Vision Builder AI (2011). I both shows the state, and also can chart the real-time values in a plot if the values are double-clicked. (b) the VBAI application itself, where an exit condition from the very first state is waiting for a pin to go high. This state never leaves, unless I set the exit condition to Low (which is what the system always reads). I connect the two isolated input pins 0 and 1 (terminal 8 and 11 on the screw terminal block, again from memory) to +24V (terminal 5), so both inputs should be able to read High.
4) The LED indicators cycle through their startup sequence, then the Power is lit as it should, and the status LED is on as well. The Fail and Pass LEDs work as they should, as mentioned (they were programmed to show a pass/fail condition, and then reset at the start of the next inspection loop).
The outputs also don't seem to work despite pullups to +24. They always seem to be low even when commanded high. I think, though, that at one point they might have briefly worked, so I suspect I'm doing something fundamentally wrong...

I cannot connect my MacBook to LG Smart TV

I cannot connect my MacBook (13-inch Late 2007) to LG Smart TV (47LB730V) via "mini-DVI to HDMI" cable.
TV says that something is connected to HDMI input and then show "No Signal" message.
But when I connect my Mac with the same cable and settings to another display (to DVI or HDMI input) everything works fine.
I think I should place something to "system\libraries\displays\overrides" folder, but do not know what
Mac OS X Lion 10.7.5 (11G63b)
Proc. 2 GHz Intel Core 2 Duo
Graphics Intel GMA X3100 144 MB
Memory 4 GB
Intel GMA X3100 144 M

Hello mahattor,
Thanks for using Apple Support Communities.
To troubleshoot issues with external displays and your Mac please follow the steps in the article below.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Take care,
Alex H.

My new IPad 3 cannot connect to WIFI even it has a full bar of the reception. In the same location, my PC and my smart phone get a full bar connection without any issues. How can I do to fix the issues (can I switch to IPad 2)?

My new Ipad 3 cannot connect to WIFI even it has a full bar of reception. In the same location, my Windows 7 PC and Andorid Smart phone can connect to the same WIFI without any issues. How can I fix it? Without WIFI, the WIFI only IPAD is nearly useless. If it cannot be fixed, can I get a replacement for IPad 2?

Take it to an Apple Store for evaluation. If defective, you'll get a replacement.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Cannot connect my samsung smart tv

Hello,
we have a HH 2.0 and have recently bought a samsung smart tv.
I am trying to connect the tv to the hub use homeplug adapters.
When i try to setup the network on the tv it detects that the cable is plugged in but cannot access the network because of an IP or DHCP problem.
I have checked and DCHP is definitely enabled. But still cannot connect.
I have tried reseting the hub and manually entering IP details but to no avail.
I dont really want to have to pay £15 to speak to techdesk can anyone help??
Thanks.

there are buttons on the power line adapters and you need to pair to each other very similar to pairing a bluetooth headset to a mobile phone. in this case it usually is press one powerline button and then when light flashes presee the other and they then pair and can 'see' each other
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Hi All, I am trying to install informatica 9.1 HF 2 connecting to 11g DB. when installing Informatica, I am at the DOMAIN CREATION windows and inputting the DB connect details and for some reason, it cannot connect to the DB. The DB is running any id

Hi All,
I am trying to install informatica 9.1 HF 2 connecting to 11g DB.
when installing Informatica, I am at the DOMAIN CREATION windows and inputting the DB connect details and for some reason, it cannot connect to the DB.
The DB is running
any ideas?
the error message states:
THE CONNECTION FAILED: CORRECT THE DATABASE INFO AND TEST THE CONNECTION AGAIN..any help please
thanks

Yup, that did it.
I actually had been made aware of the patch when I downloaded CF, but for some reason I thought it was difficult to install (I thought that you could only use the installer package if you could open Administrator). IAC I downloaded the appropriate patch file, ran it and Administrator ran. There was something in the install notes about reconfiguring the websites and removing the IIS6 Management feature but I'm not going to fool with anything because right now at least CF is running.
Thanks.

My TP-LINK TD-W8970 router cannot connect with my iMac even though my iPhone 5, iPad 3, W7 laptop and LG smart TV can. I get the message "No configured AirPort base stations have been found". Any ideas please?

My iMac cannot connect to my TP-LINK TD-W8970 router even though all other computers can. I get the message "No configured AirPort base stations have been found" and "No PPPoE configurations were found". Any ideas please?

Open the Network pane in System Preferences. If there's a closed padlock icon in the lower left corner, click it and enter your administrator login password when prompted.
At the bottom of the service list on the left is a popup menu with a gear icon. From that menu, select
Set Service Order...
A sheet will drop down showing all listed services. Drag the one that you want to use to connect to the Internet to the top of the list. Click OK to close the sheet, then close the preference pane and confirm when prompted to save the change.

Connect to smart card

I wanna connect to smart card by my card reader(ACR38U model). I wanna use java to connect , I mean connect, enter pin, and ready for process.... Do you have any code related wiith this?

I can connect Card reader which does not a contactless and use standand JP/CSC and user jpcsc.jar to connect
this get detail
public CardBean getCard()throws Exception {
          CardBean cardBean = new CardBean();
          // TODO Auto-generated method stub
          log.info("EstablishContext(): ...");
          ctx = new Context();
          ctx.EstablishContext(PCSC.SCOPE_SYSTEM, null, null);
          String atrValue = null;
          log.info("Wait for card to be inserted in any reader ...");
          State state = null;
          do {
               // blocks until a reader is available
               ctx.GetStatusChange(PCSC.INFINITE, null);
               // block until card is inserted
               state = ctx.WaitForCard(PCSC.INFINITE);
          } while (state == null);
          log.info("Card inserted into " + state.szReader);
          atrValue = Apdu.ba2s(state.rgbAtr);
          log.info("Card ATR is " + atrValue);
          atrValue = atrValue.substring(atrValue.indexOf(" ") + 1, atrValue
                    .length());
          log.info("Connect to card " + state.szReader);
          log.info("Card ATR is " + atrValue);
          card = null;
          try {
               card = ctx.Connect(state.szReader, PCSC.SHARE_EXCLUSIVE,
                         PCSC.PROTOCOL_T0 | PCSC.PROTOCOL_T1);
          } catch (Exception e) {
               System.out.println("The smart card cannot be accessed because of other connections outstanding.");
               e.printStackTrace();
          cardBean.setAtrValue(atrValue);
          cardBean.setCard(card);
          cardBean.setCtx(ctx);
          return cardBean;
this is execute method
public static List<String> executeAPDU(Card card, List<String> lAPDU) {
          log.info("executeAPDU .");
          List<String> lResult = new ArrayList<String>();
          for (int i = 0; i < lAPDU.size(); i++) {
               byte[] ba = null;
               try {
                    log.info("lAPDU message " + (String) lAPDU.get(i));
                    ba = Apdu.s2ba((String) lAPDU.get(i));
               } catch (Exception e) {
                    e.printStackTrace();
                    log.info("invalid APDU: " + e.getClass() + ", "
                              + e.getMessage());
               String result = null;
               try {
                    byte[] response = card.Transmit(ba, 0, ba.length);
                    result = Apdu.ba2s(response);
                    result = result.substring(result.indexOf(" ") + 1, result.length());
                    log.info("result apdu. " + result);
                    lResult.add(result);
               } catch (Exception e) {
                    log.error("sending APDU failed: " + e.getClass()
                              + ", " + e.getMessage());
          return lResult;
You can download exampel from this link
http://www.linuxnet.com/middle.html
but I have problem that I don't how to connect with contact less
Does any now can help me?
ps. I don't know how to download jpcsc.jar to I got it from my friend

Do I need a DLNA supported device in order to connect my SMART TV to the 5 Ghz network?

I use a Time Capsuel to create a network. Then, I use Plex media server on a PC and stream video from the TC harddrive to the plex app in the TV. Previously, from time to time, it has been slow, but most of the time it worked (1080p). My knowledge of network & stuff like this is limited...
The problem:
My Smart TV (Samsung ue46es6715) does not connect to the network's 5 Ghz band any more. It connects to the 2,4 Ghz sometimes. It does not find the 5Ghz network anymore.
Info from Samsung Support:
According to samsung support, I need a DLNA certified router. They say it is a compability problem without the DLNA support. So, samsung suppport claim this is the reason why I cannot connect to the 5 Ghz network - the TC does not support DLNA.
Questions:
First of all; Is the samsung support team correct?
2) Shouldn't I be able to connect to the 5 Ghz band in any case?
3 IF the Time Capsuel IS DLNA certified I can view, and stream data, direct from the TC harddrive
4 As the Time Capsule is not DLNA cerified, I need Plex working on a computer in order to stream data from the TC harddrive?
5 Even de fact that the TC does not support DLNA, I should still be able to at least connect the the 5 Ghz band?
Enlighten me please

The TC does not support any media servers.. it is not and never has been a media device. It is as minimal as it can be and offers SMB to windows and AFP to Mac.. and that is the sum total of connections.
DLNA can be supplied to the TV by Plex running on the PC but I am unsure of the setup. You will need to look it up and specifically the issue with samsung TV. Apple of course will never support it.. Apple use iTunes.
http://forums.plexapp.com/index.php/topic/68615-plex-not-browsing-folder-with-co ntent-via-dlna-samsung-tv/
http://forums.plexapp.com/index.php/forum/113-dlna/
Connection to 5ghz depends on setting up the connection in the TC correctly.. you have to realise you are not infact seeing the material on the TC.. you are only networking through the TC. The material is offered to your TV from the PC which is also connected to the TC and I guess using the TC as a filestore.. this is bad btw.. because then all files are streamed from TC--PC--TC---TV, You should use an external drive on the computer.. and share that with the network. Then it goes PC--TC--TV and you stop the double haul out and back to the TC. This is especially important if the PC is connected by wireless. That will reduce speed to a crawl.
5ghz is also poor range.. if the TC is far from the TV do not expect good connection or perhaps any connection.. try it close up to the TC.
Set the 5ghz to SMB standard name.. ie.. short.. 2-20 characters, No spaces and pure alphanumeric. Name should be different to the 2.4ghz name so you can choose it deliberately.
The TC name should also meet SMB standard.

Cannot connect to XE after following "How To" Windows XP Pro SP2

Hi Sharon and everyone,
I have read all related posts, the how-to and tried many times including restarting XE but still cannot connect using SQL Developer. I already have a small schema created using ths SQL Window of XE and can connect using "Toolkit for Oracle" (though this behaves erratically and I don't like it so far). I have succesfully connected also using the XE ODBC Driver from MS Access and INSERTED Rows in a table in the Schema.
I want to use SQL Developer but I get the following message when trying to connect (this PC is Server and Client) :
"Status : Failure -Listener refused the connection with the following error:ORA-12505, TNS:listener does not know of SID given in connect descriptorThe Connection decriptor used by the client was:127.0.0.1:1521:xe"
Inputs used :
Username : system
Password : *******
Basic Tab :
Hostname: 127.0.0.1
Port: 1521
SID: XE
TNS TAB:
Network Alias: "XE" (this is the default and there is no mention in the How-To of overriding it at all ! )
If I change the Network Alias to "EXTPROC_CONNECTION_DATA" or "ORACLR_CONNECTION_DATA" I get the same message.
If I try using "Service Name" instead of "SID" I get a similar message but with "does not currently know of service requested". ( All 3 Network Alias values tried)
Please can you help me ?

Hallo Sue,
Thanks for a prompt reply. It helps to know that the Basic and TNS (and I presume also the "Advanced") Tabs are mutually exclusive.
This does not however solve my problem as when I enter the SID "XE" in the Basic Tab I get the error :
"Status : Failure -E/A Exception :Connection reset" the first time I click on "Test".
If I then click on "Test" a second time I get "Status : Failure -E/A Exception :Connection reset by peer: socket write error "
The 3rd time I get :
"Status : Failure -E/A Exception :Connection reset" the first time I click on "Test".
The 4th time I get :
"Status : Failure -Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptorThe Connection descriptor used by the client was:127.0.0.1:1521:xe"
If I check using lsnrctl status the listener is listening on port 1521 (protocol=tcp, host = swisspair2).
A further problem I have had since installing XE which may be related to this problem is that I cannot start the Database Home Page (despite reading all threads similar on the XE Forum I can't resolve this either). The error I get when trying to start the Database Home Page is "The connection was refused when trying to connect to 127.0.0.1:8080"
Could you suggest any problems that I may have on this "Server/Client" PC (Windows XP Professional SP2)

Office 365 ECT to Azure Cannot connect to the LobSystem (External System)

I've tried to set up External Content Types to an Azure SQL database but when I access my page I get an error.
I basically followed http://www.pointbeyond.com/2012/12/31/surfacing-data-from-sql-azure-in-sharepoint-2013-online-office-365
Can you help me work out what i've not done, I don't know where to configure Azure firewall as this message suggests. The error is below:
Cannot connect to the LobSystem (External System). Reason: 'Cannot open server 'uf7prto4sj' requested by the login. Client with IP address '157.55.225.241' is not allowed to access the server. To enable access, use the Windows Azure Management
Portal or run sp_set_firewall_rule on the master database to create a firewall rule for this IP address or address range. It may take up to five minutes for this change to take effect. Login failed for user '*REMOVED*'. This session has been assigned a tracing
ID of '9389a67c-dc78-4134-9167-545ec963be3a'. Provide this tracing ID to customer support when you need assistance.'
Correlation ID:9a3fb39c-d0ea-1000-8099-2fad02009a01

Hi,
It depends, if it's a static IP address for your machine, it should be OK for this one IP address; if it is a dynamic IP address in a range, you can input the IP address range which contains this mentioned IP address
157.55.225.241, or update the changed address to date.
http://stackoverflow.com/questions/8543653/windows-azure-client-with-ip-address-xxx-xxx-xxx-xx-is-not-allowed-to-access-t
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you
have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

Cannot connect to the OLAP source - when Scheduling WebI Report

Hi,
I am confused by seeing the above mentioned error on random days....
Scenario - WebI report scheduled daily:
Some days the report works fine and other days it is not processing correctly but gives me this error message "Cannot connect to the OLAP source".
Our connection is via BICS and it is SSO. Data Source is BW and we use BEX.
Person who scheduled report has admin rights, our version is 4.0 SP7 P5.
Please advise if anyone has faced this issue and if there is a solution, did try the community but only found that the key store was a problem but that was previous versions.
Any help or input is much appreciated.
Kind regards,
Sarat.

Hi Sarat,
This problem can occur for multiple different reasons, so it's hard to give an advice for such symptom. Could you look at trace files from SemanticLayer component (it is hosted in APS with DSLBridge service), you should find clearer errors which can then be analyzed. There is no need to activate logs if it is still at level 'Unspecified', errors have level high enough to be output by default.
Regards,
Loic

Cannot connect LG monitor to my mac pro running bootcamp

Any ideas why I cannot connect my LG monitor to my Mac Pro which is running Bootcamp?

I have managed to connect this old monitor using a DVI to VGA connector and a vga to BNC adapter.
This gives me a picture but as the max resolution of the broadcast monitor is 1024 x 768, its a pain because if i select "mirror" in display prefs, the mac screen resolution looks horrible at the same settings as the monitor. As the monitor is clearly old and has no 16:9, Hd or decent inputs, am I better off just going out and buying a decent plasma/lcd screen with HDMi inputs and use this to check approximate colours etc?
I realise that its not the same a fully fledged HD Broadcast monitor but none of the footage is for broadcast. It is for DVD (of which most surely watch on a flat screen tele nowadays or streamed over the net.
What you you reckon guys?

Cannot connect 8500a to wireless network

i input the mac address during wireless network install but cannot connect printer to network

Do you have MAC filtering enabled? The printer will not like it plus it is not in the least a security measure. I recommend disabling MAC filtering and just set the encryption to WPA2 with a strong, 13+ character, passphrase.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Cannot connect to Smart Tee input pin...

Similar Messages

Maybe you are looking for