Cannot Connect to SQL 2008 Database Error

I am on Windows Server 2008 with SQL Server 2008 database and even after enabling the "TCP/IP" protocol and also "Named pipes" continue to get "EPMCFG-10368: Cannot connect to database..." error. Any additional troubleshooting steps would be greatly appreciated.

I am trying to connect to a SQL Server 2008 database. I provided the correct server name, port, db name, user and pswd. When using an ODBC connection I connect without issue. However, when trying to connect via the EPM System Configurator I get an error.

Similar Messages

Cannot connect to the configuration database Error in HTTPS

Hi
We have a SharePoint 2010 farm ,with more then 20 web application running . I am getting "Cannot connect to the configuration database" error in one web application when we browse through https
The same application is working fine when we browse through http . I am using AAM i have 2 web server which is been network load balanced and the https traffic comes through F5
Kindly help to resolve the issue
Prabakar

HI Prabakar,Check the below URL that exactly related to the issue.
http://expertsharepoint.blogspot.de/2014/05/cannot-connect-to-configuration-database.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Cannot connect to SQL Server databases

All of a sudden I can't connect to SQL server databases from
my local machine. The databases are on a web server. It just
started happening, and I never had a problem with it before. I
can't connect to them in the coldfusion administrator, and I can't
connect to them using ODBC DSN's either. Has anyone ever run into
this before? I didn't change anything in the cf admin, and I
certainly didn't change any logins or passwords in SQL
Server.

I've been experiencing a similar problem. Everything was fine
but I had to reboot CF 8.01.
After the reboot all the datasources are very slow to respond
and we get lots of errors of the form :
Timed out trying to establish connection
A non-SQL error occurred while requesting a connection from
blah
Timed out trying to establish connection
A non-SQL error occurred while requesting a connection from
blah
Everything is working but very slow on database queries. This
happened a couple of months ago when we last
rebooted and then it went away.
Going to have a look for a new JDBC driver from adobe and see
if that helps ....

SAP ECC6.0 cannot connect to SQL Server Database after recreating DB server

We had a disaster with our ECC 6.0 Development system a few days ago. The system is called “DEV”. The SQL Server database server got wiped out and we didn’t have a backup. Luckily, we did have a backup of the database. Our system engineers rebuilt the server and our DBA reinstalled SQL Server and restored the database. The database came up fine, but when we try to start SAP, it fails. “R3trans –d” also fails. The database is SQL Server 2008R2 10.50.2769. The OS is Windows Server 2008R2.
We verified that the “devadm” and “SAPServiceDEV” accounts have permissions on the on the server. We set the following Environment Variables for the devadm account on the database server:
DBMS_TYPE = mss
MSSQL_DBNAME = DEV
MSSQL_SCHEMA = dev
MSSQL_SERVER = <database server name>
SAPLOCALHOST = <database server name>
SAPSYSTEMNAME = DEV
We also set the following Registry Key:
HKEY_LOCAL_MACHINE/Software/SAP/DEV
Type:     REG_SZ
Value:   AdmUser
String:   <database server name>\devadm
We didn’t install any kind of SAP software on the database server.
Is there any kind of SAP components we need to install on the database server? Do we need to run the SAP installer on the database server to get everything setup correctly? I looked at another one of our SQL Server database servers and it has SAP Management Console installed and there is a C:\Program Files\SAP\hostcntl folder. I don't know what that is or it has anything to do with SAP being able to connect to the database.
Here is the error message in the R3trans log file:
4 ETW000 [     dev trc,00000] Wed Apr 29 09:44:39 2015 1501385 1.531756
4 ETW000 [     dev trc,00000] ERROR: -1 in function ExecuteAndFlush (SQLExecDirect) [line 6702]         35 1.531791
4 ETW000 [     dev trc,00000] (102) [42000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Incorrect syntax near 'execute.'.
4 ETW000 22 1.531813
4 ETW000 [     dev trc,00000] <if user_name() != 'dev' execute as login = suser_sname(suser_sid('dev')) with no revert> failed -- connect terminated
4 ETW000 38 1.531851
4 ETW000 [    dblink ,00000] ***LOG BY2=>sql error 102    performing CON 56 1.531907
4 ETW000 [    dblink ,00000] ***LOG BY0=>[Microsoft][SQL Server Native Client 10.0][SQL Server]Incorrect syntax near 'execute.'.
4 ETW000 30 1.531937
2EETW169 no connect possible: "DBMS = MSSQL --- SERVER = '<db server name>' DBNAME = 'DEV'"
Please let me know what we need to do to get SAP to connect to the database.
Thanks,
Jerry

Here it is: 4 ETW000 R3trans version 6.22 (release 720 - 18.11.11 - 11:29:00). 4 ETW000 unicode enabled version 4 ETW000 =============================================== 4 ETW000 4 ETW000 date&time : 29.04.2015 - 19:33:01 4 ETW000 control file: 4 ETW000 R3trans was called as follows: R3trans -d 4 ETW000 trace at level 2 opened for a given file pointer 4 ETW000 [    dev trc,00000] Wed Apr 29 19:33:01 2015                                                  83 0.000083 4 ETW000 [    dev trc,00000] db_con_init called                                                        28 0.000111 4 ETW000 [    dev trc,00000] set_use_ext_con_info(): rsdb/ssfs_connect not set => ssfs not used        31 0.000142 4 ETW000 [    dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3 4 ETW000                                                                                                  20 0.000162 4 ETW000 [    dev trc,00000] create_con (con_name=R/3)                                                10 0.000172 4 ETW000 [    dev trc,00000] Loading DB library 'dbmssslib.dll' ...                                    31 0.000203 4 ETW000 [    dev trc,00000] DlLoadLib success: LoadLibrary("dbmssslib.dll"), hdl 0, addr 000007FEEE6D0000 4 ETW000                                                                                                1865 0.002068 4 ETW000 [    dev trc,00000]      using "D:\usr\sap\DEV\SYS\exe\uc\NTAMD64\dbmssslib.dll"              14 0.002082 4 ETW000 [    dev trc,00000] Library 'dbmssslib.dll' loaded                                            13 0.002095 4 ETW000 [    dev trc,00000] function DbSlExpFuns loaded from library dbmssslib.dll                    15 0.002110 4 ETW000 [    dev trc,00000] Version of 'dbmssslib.dll' is "720.00", patchlevel (0.200)                84 0.002194 4 ETW000 [    dev trc,00000] function dsql_db_init loaded from library dbmssslib.dll                  16 0.002210 4 ETW000 [    dev trc,00000] function dbdd_exp_funs loaded from library dbmssslib.dll                  11 0.002221 4 ETW000 [    dev trc,00000] New connection 0 created                                                  29 0.002250 4 ETW000 [    dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog = 4 ETW000                                                                                                  29 0.002279 4 ETW000 [    dev trc,00000] db_con_connect (con_name=R/3)                                            12 0.002291 4 ETW000 [    dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3 4 ETW000                                                                                                  16 0.002307 4 ETW000 [    dev trc,00000] find_con_by_name found the following connection:                          9 0.002316 4 ETW000 [    dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog = 4 ETW000                                                                                                  21 0.002337 4 ETW000 [    dev trc,00000] Thread ID:3492                                                          594 0.002931 4 ETW000 [    dev trc,00000] Thank You for using the SLODBC-interface                                  17 0.002948 4 ETW000 [    dev trc,00000] Using dynamic link library 'D:\usr\sap\DEV\SYS\exe\uc\NTAMD64\dbmssslib.dll' 4 ETW000                                                                                                  21 0.002969 4 ETW000 [    dev trc,00000] dbmssslib.dll patch info                                                  27 0.002996 4 ETW000 [    dev trc,00000]    SAP patchlevel 0                                                      12 0.003008 4 ETW000 [    dev trc,00000]    SAP patchno 200                                                        92 0.003100 4 ETW000 [    dev trc,00000]    Last MSSQL DBSL patchlevel 0                                            20 0.003120 4 ETW000 [    dev trc,00000]    Last MSSQL DBSL patchno        200                                    14 0.003134 4 ETW000 [    dev trc,00000]    Last MSSQL DBSL patchcomment Take care of warnings during database connect (1600066) 4 ETW000                                                                                                  18 0.003152 4 ETW000 [    dev trc,00000] ODBC Driver chosen: SQL Server Native Client 10.0 native                273 0.003425 4 ETW000 [    dev trc,00000] Network connection used from XXSAPDEV01 to XXSQLSAPDEV01 using tcp:XXSQLSAPDEV01 4 ETW000                                                                                                128 0.003553 4 ETW000 [    dev trc,00000] Network connection used from XXSAPDEV01 to XXSQLSAPDEV01 using tcp:XXSQLSAPDEV01 4 ETW000                                                                                              20908 0.024461 4 ETW000 [    dev trc,00000] Network connection used from XXSAPDEV01 to XXSQLSAPDEV01 using tcp:XXSQLSAPDEV01 4 ETW000                                                                                                3485 0.027946 4 ETW000 [    dev trc,00000] Driver: sqlncli10.dll Driver release: 10.50.2769                        3695 0.031641 4 ETW000 [    dev trc,00000] GetDbRelease: 10.50.2769.00                                              475 0.032116 4 ETW000 [    dev trc,00000] GetDbRelease: Got DB release numbers (10,50,2769,0)                      18 0.032134 4 ETW000 [    dev trc,00000] ERROR: -1 in function ExecuteAndFlush (SQLExecDirect) [line 6702]      6505 0.038639 4 ETW000 [    dev trc,00000] (102) [42000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Incorrect syntax near 'execute.'. 4 ETW000                                                                                                  27 0.038666 4 ETW000 [    dev trc,00000] failed -- connect terminated 4 ETW000                                                                                                  31 0.038697 4 ETW000 [    dblink ,00000] ***LOG BY2=>sql error 102    performing CON                              49 0.038746 4 ETW000 [    dblink ,00000] ***LOG BY0=>[Microsoft][SQL Server Native Client 10.0][SQL Server]Incorrect syntax near 'execute.'. 4 ETW000                                                                                                  27 0.038773 2EETW169 no connect possible: "DBMS = MSSQL                            --- SERVER = 'XXSQLSAPDEV01' DBNAME = 'DEV'"

Migration on active directory from 2003 to 2008 and SharePoint error Cannot connect to the configuration database.

Hi all,
In advance i`m thankful for your help,
I come across a problem while migrating the Active Directory from Windows Server 2003 to Windows Server 2008 R2,
SharePoint 2010 is getting this error Cannot connect to the configuration database. The same goes for the Administrative page,
Nothing is change in the MySql database, same log in, same server name, i guess it have something to do with the SharePoint Farm,
My question is will reinstalling the SharePoint do the job? Or is there an easy way to get back on my old track?
I`ve try to sync users... no good
PS C:\Users\administrator.SERVERM> if($configManager.IsSynchronizationRunning()
-eq $false)
>> {
>> $configManager.StartSynchronization($true)
>> Write-Host "Started Synchronizing"
>> }
>> else
>> {
>> Write-Host "Already Synchronizing"
>> }
>>
Can someone explain a little bit more about this:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)
Aleksandar Delcevski, Web-administrator School of Journalism and Public Relations Jurij Gagarin 17-1/1, 1000 Skopje, R. Macedonia t: + 389 2 3090 004 mob: +38972 257 565 [email protected]; www.vs.edu.mk; www.medium.edu.mk; www.unescochair-vs.edu.mk

Hiya,
I don't think it is necessary to reinstall.
You should just confirm that your basic infrastructure is working.
1: On the SharePoint server, open cmd and write ping <SQL server name>
2: On the SharePoint server, open cmd and write nslookup <SQL server name>
Basically the steps outlined here, is the best way to start:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)

Critical Error: Cannot Connect to SQL Server. {SQL Server} not found. Timeout expired.

Greetings,
I have been having some issues with various areas in a SharePoint 2013 farm. While working my way through a bazillion errors in the event logs, I have found the following error. It looks to be happening every hour; almost exactly 5 minutes after
every hour.
"Cannot connect to SQL Server. A_PROD_SP01 not found. Additional error information from SQL Server is included below.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."
I also find, a health analyzer rule that is failing at the same time:
Availability: One or more servers is not responding.
However, there isn't any server listed in the Failing Servers section.
Any thoughts?
Thank you,
Bob

Hi Bob,
For your issue, it can be caused by that the SharePoint database access account might not have the necessary permissions to communicate with the SQL Server. Please grant correct permissions to the database access account:
You must be a member of the Farm Administrators group to perform this task.
Assign the database access account:
On the Central Administration home page, click Security and in the
General Security section click Configure service accounts.
On the Service Accounts page, in the Credential Management section, in the upper drop-down list click the correct Web application pool for your Web application.
In the Select an account for this component drop-down list, click the domain account that you want to associate with this Web application pool, or click
Register new managed account to associate a new domain account with this application pool.
Click OK to save changes.
Reference:
https://technet.microsoft.com/en-in/library/ee513066(v=office.14).aspx
http://blogs.technet.com/b/wbaer/archive/2009/10/06/intermittent-database-server-connectivity-and-microsoft-sharepoint-products-and-technologies.aspx
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

SharePoint 2007:Cannot connect to the configuration database.

The share point 2007 server under Windows Server 2008 R2 runs well formerly, but suddenly the user can't visit the site with error on page:
Cannot connect to the configuration database.
I also checked windows log with bellow main errors：
Log Name:      Application
Source:        Office Server Search
Date:          2015/2/28 22:30:47
Event ID:      10034
Task Category: Gatherer
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ***
Description:
Could not access the Search service configuration database.
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Office Server Search" />
    <EventID Qualifiers="49152">10034</EventID>
    <Level>2</Level>
    <Task>3</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-28T14:30:47.000000000Z" />
    <EventRecordID>2323514</EventRecordID>
    <Channel>Application</Channel>
    <Computer>***</Computer>
    <Security />
</System>
<EventData>
    <Data>
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)</Data>
</EventData>
</Event>
======================================
Log Name:      Application
Log Name:      Application
Source:        Windows SharePoint Services 3
Date:          2015/2/28 22:30:50
Event ID:      5586
Task Category: Database
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ***
Description:
Unknown SQL Exception 64 occured. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows SharePoint Services 3" />
    <EventID Qualifiers="0">5586</EventID>
    <Level>2</Level>
    <Task>484</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-28T14:30:50.000000000Z" />
    <EventRecordID>2323517</EventRecordID>
    <Channel>Application</Channel>
    <Computer>***</Computer>
    <Security />
</System>
<EventData>
    <Data>64</Data>
    <Data>A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)</Data>
</EventData>
</Event>
==================================================
Source:        Windows SharePoint Services 3
Date:          2015/2/28 22:31:00
Event ID:      27745
Task Category: General
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ***
Description:
The description for Event ID 27745 from source Windows SharePoint Services 3 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on
the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows SharePoint Services 3" />
    <EventID Qualifiers="14130">27745</EventID>
    <Level>2</Level>
    <Task>1105</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-28T14:31:00.000000000Z" />
    <EventRecordID>2323520</EventRecordID>
    <Channel>Application</Channel>
    <Computer>***</Computer>
    <Security />
</System>
<EventData>
    <Data>#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.</Data>
</EventData>
</Event>
Please kindly support to find the root cause and guide how to fix it ASAP.
Many appreciations for your hellp in advance!
Note:
1)As checked, SQL server service is running well;
2)Web server log under the path C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\LOGS with bellow errors:
03/02/2015 11:25:53.28 mssearch.exe (0x0F0C)                   0x08FC Search Server Common
GathererSql                   0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx
Line:9654
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          Common
0 Monitorable Application b9f7f366-4027-4923-b5ce-b93c132df7c3, resource 1: pIDBInitialize->Initialize error. Failed to create a non fast load session. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp Line:608
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          Common
0 Monitorable CResourceManager::CreateSession Error creating non fastload session 'Provider=SQLOLEDB;Extended Properties='Server=***;Database=SP_SharedServices_Search;Trusted_Connection=yes;App=Windows SharePoint Services;Timeout=15';'. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp
Line:658
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          UtilCommon
0 Monitorable Dumping error record [0]:   Source: Microsoft OLE DB Provider for SQL Server   HRESULT: 0x80004005   Code: 11   Description: [DBNETLIB][ConnectionRead (recv()).]General network error. Check
your network documentation. - File:d:\office\source\search\common\pkmutild\atldbext.cxx Line:1250
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          GathererSql
0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:9654

Hi,
In this forum we mainly discuss questions and feedbacks about Office products, since your question is about SharePoint, I suggest you post the question in SharePoint forum to get further assistance:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=sharepoint
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Unable to connect to sql server database

i run on CMD:
aspnet_regsql -C "Data Source =Davidchamoun/sqlexpress : intergrated security= true" -ssadd -sstype p
i got
a network-related or instance-specific error occurred while establishing a connection to sql server. the server
was not found or was not accessible. verify that the instance name is correct and that sql server is configured to allow remote connections. (provider: SQL Network interfaces . error: 25 – connection string is not valid
unable to connect to sql server database.
im using sql sever 2012 express, microsoft visual studio web 2008 express.
please help me.

i run it as :
aspnet_regsql -C "Data Source =Davidchamoun\sqlexpress : integrated security= true" -ssadd -sstype p
i got the same error :
an error has occurred . details of the exception:
a
network-related or instance-specific error occurred while establishing a connection to sql server. the server was not found or was not accessible. verify that the instance name is correct and that sql server is configured to allow remote connections. (provider:
SQL Network interfaces . error: 25 – connection string is not valid
unable to connect to sql server database.
im using also windows 8.1
pls help me
ty for ur reply

Reporting Services Server cannot connect to the DPM database. ( dpm 2010 )

Reporting Services Server cannot connect to the DPM database.
To repair the configuration, follow steps for repairing DPM from DPM Setup Help.
ID: 3001
i can not try the Recommended action from error codes catalog because i did not found Change reporting
password

Hi,
We have had several customers report this after installing DPM 2012 R2.
To get past the below error while scheduling reports to be mailed.
Reporting Services Server cannot connect to the DPM database.
To repair the configuration, follow steps for repairing DPM from DPM Setup Help.
ID: 3001
Perform the following steps as necessary:
1. Created a new local group called "DPMDBReaders$<DPMServerName>"
2. Created a new user called, "DPMR$<DPMServerName>" and added this user to DPMDBReader group that we created on step 1.
3. Open SQL management studio and add the DPMDBReaders$<DPMServerName group to Logins under Security in SQL Management Studio.
4. Modify the properties and under General – change the default database to the current DPMDB name.
5. Under User Mapping – select the current DPMDB name and check the db_datareader checkbox.
6. In SQL Management Studio, navigate to the Databases > DPMDB > Security > Users > and select the DPMDBReaders$<DPMServerName>" group.
Right-click the DPMDBReaders$<DPMServerName>" group and select properties. Under the
Securables section, click on Search. On the add objects dialog, click OK.
On the Select Objects dialog, click the Objects type, then check the
stored procedure checkbox. Browse and add the following two stored procedures
“Prc_MOM_Heartbeat_Get” and “prc_MOM_ProductionServer_Get”.    Grant the Execute permission for both of the stored procedures added.
7. In SQL Reporting Services Configuration manager, under Report Manager URL - click on the link to open the portal (http://localhost/Reports)
      i. Click on the DPMReoprts_GUID to open the DPM reports.
      ii. Click on the DPMReporterDataSource
      iii. On the poperties page, enabled "Credentials stored securely in the report server" on DPMReporterDataSource configuration page and added “DPMR$<DPMServerName>” user account that we created in step 2.
      iv. tick "Use as Windows credentials when connecting to the data source."
      v.   Click ‘Test connection’ on the same page to verify whether it can connect successfully.
8. In SQL Reporting configuration manager - change the Service Account to use build-in account: Network Service
9. Reboot the DPM Server.
10. You should then be able to schedule e-mailed reports.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Cannot connect to the configuration database

I tried to configure my server with active directory after I have successfully configured sharepoint . For a mistake , they made me delete the active directory and now when I try to connect to the admin section or site page it me give the following error :
"Cannot connect to the configuration database"
Deleting the active directory ; I noticed that all the other users have disappeared and the service : SQL AGENT ( Sharepoint ) not run and the error is :
" This installation of SQL Server Agent is disabled. The edition of SQL Server that installed this service does not support SQL Server Agent." Thank you for the Help

Was the active directory server that you removed the last active directory server in the farm? If so then your only two real choices are to rebuild everything from scratch or restore everything from backup.
If it was just that you were trying to make the SharePoint server into a Domain Controller, then I still think you may need to rebuild. But you can try re-adding the SharePoint server to the Domain. It may have lost its Domain membership when you removed
AD from it and gone back to being a standalone server.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

SQL 2008 R2 error: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified

after some year work with SQL server 2005,i decide change to SQL server 2008 R2.
When i completed install SQL 2008 R2,i can't connected to SQL server due to this following error
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
And when i click to technical details,i take some thing like this
===================================
Cannot connect to HUY-PC\SQLEXPRESS.
===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
Error Number: -1
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Please!!!Some body help me solve this problem(except format my computer),i really really need your advice.

Hi huydaibang,
The older version SQL Server 2005 could be installed with SQL Server 2008 R2 side-by-side. It could not be the problem.
The reason that we get this error message is the client stack could not receive SSRP response UDP packet from SQL Browser.
Here are the steps:
1) Make sure your server name is correct, e.g., no typo on the name.
2) Make sure your instance name is correct and there is actually such an instance on your target machine.
3) Make sure the server machine is reachable, e.g, DNS can be resolve correctly, you are able to ping the server (not always true).
4) Make sure SQL Browser service is running on the server.
5) If firewall is enabled on the server, you need to put sqlbrowser.exe and/or UDP port 1434 into exception.
For more information, please refer to
http://blogs.msdn.com/b/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

DUPLICATE DB : ORA-17629: Cannot connect to the remote database server

[oracle@ora11g1 ~]$ export ORACLE_SID=sales
[oracle@ora11g1 ~]$ rman target sys/sales@sales
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Jun 5 13:00:15 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SALES (DBID=690066655)
RMAN> connect auxiliary sys/salestby2@salestby2
connected to auxiliary database: SALES (not mounted)
RMAN> DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE SPFILE
2> SET DB_NAME= 'sales'
3> SET DB_UNIQUE_NAME= 'salestby2'
4> SET control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl'
5> SET DB_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/'
6> SET LOG_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/';
Starting Duplicate Db at 05-JUN-13
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=20 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora''";
executing Memory Script
Starting backup at 05-JUN-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=58 device type=DISK
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:26
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database server
continuing other job steps, job failed will not be re-run
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/05/2013 13:05:27
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:27
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database server

Welcome to the oracle forums!
Please take some time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535]FAQ PAGE
Always post 4 digit oracle version and OS details.
Post any query out put between \ \ tags
Mark your questions as answered if you get the answer
Password of SYS user on primary and standby must be same.Copy the password file from primary to standby server
scp $ORACLE_HOME/dbs/orapwv112 <oracle_user@auxiliary_host>:/u01/app/oracle/product/11.2/dbs/orapwdupv112

Sql developer won't connect with SQL server database on cluster

Hello,
I have a microsoft SQL server database on a windows cluster. Name for this cluster is like XXX/YYY
When I try to connect to this database with SQL developer, I get a failure, mentioning:
"Status : Failure -Cannot connect to Miscrosoft SQL Server on XXX/YYY"
As far as I know, I have installed the correct jtds driver (version 1.2.5), since I can connect to sql server databases on single server hosts.
Does anyone know how to connect to databases on windows clusters?
Edited by: Ingmar on Jan 16, 2012 4:08 PM
Edited by: Ingmar on Jan 16, 2012 4:22 PM

Hi Ingmar,
Try this is in the port box
1433/dbname;instance=YYY
dbname can be omitted
-Turloch
SQL Developer team
1/Giving an instance name in SQLDeveloper connection to SQL Server (from August 2011)
MS SQL Server Connection
The correct syntax to deal with this is in the port box
1433/dbname;instance=instance
dbname can be omitted
2/cluster configuration (uses instance name)
http://stackoverflow.com/questions/1160024/jdbc-connect-string-for-sql-server-cluster
where vvv\iii is the cluster address: jdbc address is:
"jdbc:sqlserver://vvv;instanceName=iii"
3/jtds url details available in
http://jtds.sourceforge.net/faq.html

Not able to connect with Sql Server Database

Hi,
I'm not able to connect with Sql Server database.during making connection I'm getting the following error:
"Status : Failure -I/O Error: SSO Failed: Native SSPI library not loaded. Check the java.library.path system property."
Please help
Regards,
Neeraj Goel

Hi,
I'm using Sql Server 2000.
I downloaded the driver from the given site and still having the same problem. Do I need to copy the driver file in some specific folder.
Regards,
Neeraj Goel

SQL Server Management 6.5.1.0 and 6.5.4.0 does not discovery SQL 2008 databases on Windows 2003

SQL Server Management 6.5.1.0 and 6.5.4.0 does not discovery SQL 2008 databases on a custom instance name or when multiple SQL instances are installed on Windows 2003.
OS Version: Windows 2203 x64 with SP2
Database Version: 10.3.5869.0
The instance in this case: I01 is running on port 49168.
SQL Server Network Configuration | Protocols for I01 | IP Addresses | IPAll | TCP Port = 49168
The DB Engine class is discovered but not the "Tcp Port" property.
The database discovery script then fails as it is missing the 8th parameter; The Port.
Looking at the discovery script DiscoverSQL2008DBEngineDiscovery.vbs i see the following WMI query.
Set oWMI = GetObject("winmgmts:\\" & computerName & "\root\Microsoft\SqlServer\" & SQL_WMI_NAMESPACE)
Set oQuery = oWMI.ExecQuery("SELECT * FROM ServerNetworkProtocolProperty
Using WMI Explorer if I connect to namespace: root\Microsoft\SqlServer\ComputerManagement10
and query "SELECT * FROM ServerNetworkProtocolProperty". There are no instances.
What am I missing or doing wrong?
Closely related to this article. https://gallery.technet.microsoft.com/Hotfix-Management-Pack-SQL-17cf1118#content.
Thanks
Gavin

Hi,
I would like to know is there any update about the issue. If the issue is solved, will you please share the resolution here to help others in this forum who encounter similar issue.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Cannot Connect to SQL 2008 Database Error

Similar Messages

Maybe you are looking for