Cannot connect to switch via IE

Hi all,
if got a question.
We bougth a nex Catalyst Express 500 Switch.
First I run the setup as it is recommended in the getting started guide.
I gave the switch an ip-address and finished the setup. I tested the connection to the device manager via IP-Adress. It was working perfect.
Then I turned of the switch to assemble it into the rack.
I started the switch and connected the cabeles. Then I wanted to connect to the device manager via IE but i couldnt connect. The IP-Adress is definitly correct. I connected to the switch by using this ip address 10 minutes ago.
Also when i ping the switch i get no answer.
Any suggestions what i can do?
Can i reset the switch without using the device manager?
Sry when my english is not so good. Didnt wrote english vor a long time.
Greetz
Benjamin Abraham

Hi Benjamin,
Try to following procedure to reset the switch to factory defaults and start the configuration again.
-- RESTORED TO FACTORY DEFAULTS
- Unplug power cord from switch.
- While plugging back in the power to the switch, hold setup button.
- Wait until all LED indicator lights turn amber and release button.
- When a switch port LED blinks green, connect your PC to that port. The port LEDs on your
PC and the switch blink green while the switch configures the connection (it will take
around 1 minute).
- Pull up browser and select either Erase system configuration item and click on Submit
button.(make sure that the PC and the web browser is supported
http://www.cisco.com/univercd/cc/td/doc/product/lan/catex500/12225fy/ug/intr
o.htm#wp109894)
- At this point, the switch is set back to factory default configuration; proceed with
initial setup procedure again.
- Enter the network settings.
- Click Submit to save changes and finish basic configuration.
- Click Submit to save changes and finish basic configuration.
- Apply Smartports roles.
- Click Restart/Reset on the GUI dashboard.
- Chose the option Restart the switch with is current settings and then Submit.
Please update on the status.
HTH, Please rate if it does.
-amit singh

Similar Messages

My macbook pro cannot connect to internet via wifi

I have a Macbook Pro 2010 OS X 10.8.3. I cannot connect to internet via wifi (Air por). My Macbook Pro does not recognize my network and when I select it from the list of network it asks for my network password. when I type in my password a dialog box gives me timeout error. Please could anyone help me. I am using ethernet for my connection at the moment. Do I need to reset my macbookpro? if yes, what will happen to my applications and operating system (mountain lion)?
Monireh

When you use the Airport utility what happens?
What is in the System Preferences control panel for Network settings?
http://www.apple.com/support/airport - there is a forum just for Airport Community
Airport Express FAQ
http://support.apple.com/kb/HT1515
Wi-Fi Setup Considerations
Things to consider before you begin
Start with a plan for the physical layout. Depending on whether you have an existing Wi-Fi network, or if you are using your AirPort Express as a standalone Wi-Fi device, there are several options available for you to choose from.
When using Ethernet, Cat6 cable is recommended.
The layout you choose should take into account environmental factors such as physical access, location, range, radio frequency interference, etc.
You will need to consider what AirPort Utility settings to adopt.
You will need to know whether you are using an AirPort Express (802.11b/g) or an AirPort Express (802.11a/b/g/n).
If you will be using more than one Wi-Fi base station, it may be helpful to read the article Extending the range of your wireless network by adding additional Wi-Fi base stations.
AirPort Discussions
Discuss your AirPort Base Station, Time Capsule and Wi-Fi questions with fellow community members.
More
Direct you to the proper forum for MacBook :
MacBook Series Forumshttps://discussions.apple.com/community/notebooks?view=discussions
Mac OS X Forums
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

Cannot connect to database via TNS

Hello!
I installed XE with default settings and have some trouble. I cannot connect to database via TNS. Two symptoms:
1. I can connect with SQLPLUS system/pwd (locally, without tns name input), but CANNOT connect with SQLPLUS system/pwd@EX (WITH TNS NAME input).
2. I cannot start Database Home Page.
How to avoid this problem? Any ideas?
DETAILS:
PC configuration: Win2k+SP4, 512Mb, Outpost Firewall (disabled!), No another Oracle products being installed.
TNSNAMES.ORA file:
************* BEGIN TNSNAMES *****************************************
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = pz)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
************* END OF TNSNAMES *****************************************
Listener status:
************* BEGIN STATUS *****************************************
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Prod
ction
Start Date 22-MAR-2006 17:27:15
Uptime 0 days 1 hr. 8 min. 53 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File D:\oracle\ora10xe\app\oracle\product\10.2.0\server\ne
work\admin\listener.ora
Listener Log File D:\oracle\ora10xe\app\oracle\product\10.2.0\server\ne
work\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=pz)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation
HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully
************* END OF STATUS *****************************************
NETSTAT -an results:
************* BEGIN NETSTAT *****************************************
Proto Local Address Foreign Address State
TCP 0.0.0.0:1521 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2298 0.0.0.0:0 LISTENING
TCP 127.0.0.1:2455 127.0.0.1:8080 ESTABLISHED
TCP 127.0.0.1:8080 0.0.0.0:0 LISTENING
TCP 127.0.0.1:8080 127.0.0.1:2382 CLOSE_WAIT
TCP 127.0.0.1:8080 127.0.0.1:2455 ESTABLISHED
TCP 192.168.200.49:1521 192.168.200.49:2298 ESTABLISHED
TCP 192.168.200.49:2298 192.168.200.49:1521 ESTABLISHED
<truncated>
************* END OF NETSTAT *****************************************
I found following error in SQLNET.LOG:
*************** START LOG *********************************************
Fatal NI connect error 12570, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 22-MAR-2006 17:28:59
Tracing not turned on.
Tns error struct:
ns main err code: 12570
TNS-12570: TNS:packet reader failure
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
*************** END OF LOG *******************************************

I successfully connect with XE client to another Oracle databases from LAN, including 8i and 9i databases.
But cannot connect from another machines to my XE.

Why I cannot connect to twitter via iPhone?

I just cannot connect to Twitter via iPhone.
It started around 6 months ago, before it was working just fine.
Important notes:
I live in China, dono need to connect to it via VPN.
Interesting thing is that in my iPad app I have no problem at all, can connect, place posts, etc.
Just in iPhone its not possible, not even connecting to the site via Safari.
Why's that? Anyone has any idea on how to solve this problem?

You have to buy Photoshop Express first. It's a In-App Purchase.
Setting>Purchases>Adobe Effect Pack
http://i1224.photobucket.com/albums/ee374/Diavonex/e6e3553e.jpg

Changed apple-ID password - cannot connect to icloud via macbook air but it works on iphone and itunes..

My Ipad got stolen soon after i updated in to ios7.
the idiot i am, i did not activate find my ipad, so i changed all my passwords, including the apple-id.
now i have the following problem:
on my iphone, everything works as usual.
however, i cannot connect to icloud via my macbook air, if i type in my password (and trust me i have already changed it a few times, it always works on the phone but not on the macbook) i get the following message: "Sie konnten aufgrund eines Kommunikationsproblems mit iCloud nicht angemeldet werden." which means more or less that i could not connect to icloud due to a communication problem.
does anyone have an idea how to fix this?
thank you!
regards

Sign out of iCloud, the sign in with the new ID/ Password.

TS1363 I have udated my OS to 6.1.3 and now I cannot connect to Apple via my Iphone 4

I am havng a problem connecting to Itunes via my mobile phone since I updated to OS 6.1.3 It states 'Cannot connect to Itunes store and there is just an OK button which when pressed just returns me to the main screen. Any suggestions on what has gone wrong and how I can rectify it..... very simple explanations please I am not a technical person... so step by step please.....

Problem has most likely nothing to do with update of the phone and assiciated with something blocking your connection to secure servers in Itunes.
Try to use that article
Can't connect to the iTunes Store - Support - Apple
To add to what you see in there, I also found helpful to "reset all settings" and to switch date and time couple years in advance and then back.

Cannot connect to database via JApplet

Hi,
I created a Java application which allows me to send information to my mysql database using the jdbc connector via a JFrame. However when i modified the file to be a JApplet the info will not sent and i cannot connect to the database? Any particular reason for this?
I need it to be a JApplet so i can add it to a browser window.
Code: ( java )
private void save ()
Connection conn = null;
try
Statement stmt;
String userName = "root";
String password = "PASSWORD";
String url = "jdbc:mysql://localhost:3306/DATABASE";
Class.forName ("com.mysql.jdbc.Driver").newInstance ();
conn = DriverManager.getConnection (url, userName, password);
System.out.println ("Database connection established");
//Get a statement object
stmt = conn.createStatement();
stmt.executeUpdate( "INSERT INTO TABLE(Info i know to put in) VALUES('Values i know to put in')");
catch (Exception e)
System.err.println ("Cannot connect to database server");
finally
{if (conn != null)
{try
{conn.close ();
System.out.println ("Database connection terminated");
catch (Exception e) { /* ignore close errors*/ }
As i said above it works fine as a JFrame but not as a JApplet. Any help would be great.
Thanks G

Your error reporting is not good. You print a meanningless message or ignore the error.
Print the stacktrace in the catch blocks.
Change the code, rerun it and then check the Java Console for output.
I'm guessing you'll see a security error. Unsigned applets can't access the client file system. If so, sign the applet.

Cannot connect to apexlistener via SQL developer.

I cannot connect via SQL developer to my installed apexlistener (2.0.1) installed on Glassfish (3.1.2) webserver.
In the server.log from this domain i always see following error messages;
[#|2013-04-24T10:49:25.199+0200|SEVERE|glassfish3.1.2|null|_ThreadID=453;_ThreadName=Thread-2;|No pool found for: http://servername:8080/apex/oauth2/token|#]
[#|2013-04-24T10:49:25.199+0200|INFO|glassfish3.1.2|null|_ThreadID=453;_ThreadName=Thread-2;|No DB connection found for: /apex/oauth2/token|#]
[#|2013-04-24T10:49:25.206+0200|SEVERE|glassfish3.1.2|null|_ThreadID=453;_ThreadName=Thread-2;|The pool named: apex_al does not exist|#]
Help appreciated...
Regards,
Ton

Turned debug on in defaults.xml;
[#|2013-04-24T12:19:47.840+0200|SEVERE|glassfish3.1.2|null|_ThreadID=453;_ThreadName=Thread-2;|No pool found for: http://.......:8080/apex/oauth2/token|#]
[#|2013-04-24T12:19:47.840+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Could not find any database pool to use for this request|#]
[#|2013-04-24T12:19:47.841+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Applied database connection info|#]
[#|2013-04-24T12:19:47.841+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Attempting to process with PL/SQL Gateway|#]
[#|2013-04-24T12:19:47.842+0200|INFO|glassfish3.1.2|null|_ThreadID=453;_ThreadName=Thread-2;|No DB connection found for: /apex/oauth2/token|#]
[#|2013-04-24T12:19:47.844+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Not processed as PL/SQL Gateway request|#]
[#|2013-04-24T12:19:47.844+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Attempting to process as a RESTful Service|#]
[#|2013-04-24T12:19:47.863+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Default Database connection does not exist|#]
[#|2013-04-24T12:19:47.952+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Choosing: oracle.dbtools.rt.oauth.TokenHandler as current candidate with score: Score [handle=null, score=0, scope=SecurityConfig [constraint=secure, realm=OAUTH_CLIENT, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true]|#]
[#|2013-04-24T12:19:47.954+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Determining if request can be dispatched as a Tenanted RESTful Service|#]
[#|2013-04-24T12:19:47.954+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Request path has one path segment, continuing processing|#]
[#|2013-04-24T12:19:47.955+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|No JDBC Principal established, cannot dispatch|#]
[#|2013-04-24T12:19:47.956+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|Chose oracle.dbtools.rt.oauth.TokenHandler as the final candidate with score: Score [handle=null, score=0, scope=SecurityConfig [constraint=secure, realm=OAUTH_CLIENT, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true] for: POST oauth2/token|#]
[#|2013-04-24T12:19:47.960+0200|SEVERE|glassfish3.1.2|null|_ThreadID=453;_ThreadName=Thread-2;|The pool named: apex_al does not exist|#]
[#|2013-04-24T12:19:47.965+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|oauth2/token authorized as: IsZv_-R511-vq79m880SQA..|#]
[#|2013-04-24T12:19:47.965+0200|INFO|glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=453;_ThreadName=Thread-2;|must be accessed over https only|#]

Cannot connect to internet via Vivaz in Cambodia with CellCard(Mobitel)

I cannot connect my Vivaz phone as modem with my laptop to the internet via a telecom company is called Mobitel (Cell Card). Any one can help?

http://talk.sonyericsson.com/message/7095#7095 Link to related thread about using the Vivaz as a modem.PC suite has been replaced by PC companion now.

Lumia 820 cannot connect to PC via Bluetooth

Hi there. I have recently bought a new Lumia 820, which is a great phone, except that I cannot connect the Lumia to my PC (win 7) via Bluetooth. I have been using phones with bluetooth for a long time, so this is not my first time. I can see my pc in the list, but when i click "connect", the phone is connected to the pc for like one second and then the connection breaks up. Transfering a single file by clicking "send" and then "bluetooth" is no problem, but the connecting directly between the pc and the phone via bluetooth instead of usb cable is no success. Can anybody help me out here please? Thank you!
Solved!
Go to Solution.

A continuous data connection is not supported. In all fairness it's kind of like trying to fill a tank using a thimble.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Lync 2013 on Windows Phone 8 cannot connect to Exchange via TMG

Hi,
I've found that the latest Lync 2013 client on WP8 cannot connect to our Exchange Server 2010 via TMG and the problem is related to autodiscovery. Based on detailed log analysis the symptom is the following:
1. The client is sending a request:
GET
https://autodiscover.neostratus.com/autodiscover/autodiscover.xml
2. It gets a TMG logon form and then tries to POST here:
POST
https://autodiscover.neostratus.com/cookieauth.dll?getlogon?curl=z2fautodiscoverz2fautodiscover.xml&reason=0&formdir=9
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/requestschema/2006">
<Request><EMailAddress>[email protected]</EMailAddress>
<AcceptableResponseSchema>http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a</AcceptableResponseSchema>
</Request></Autodiscover>
</SentRequest>
The URL is wrong and it fails of course. This is the situation with Lync credentials and manually configured Exchange credentials as well.
Other clients (PC, iOS) can connect fine and all test tools confirm that our autodiscovery setup is correct. I can POST the above XML using basic authentication to the correct URL and get a correct response. And the same autodiscovery process works fine
when setting up an email account on the same WP8 device.
Is this a known WP8 Lync 2013 client bug and is there a workaround?
BR,
Andras

Hi,
The lync client should be able to sing in Lync Server and just lost calendar information if Lync client cannot connect to Exchange. Please double check if the device is able to connect to the EWS URL.
Kent Huang
TechNet Community Support

Cannot connect to Internet via newly created wireless network

Just purchased an Aiport Express router this week. Connected it to an RCA DCM425 Time Warner Cable modem and it worked fine out of the box. Now, after running the Airport Utility to create a new password-protected network, I cannot connect to the Internet. Both my PowerBook G4 (running Mac OS X 10.4.10) and Windows PC (XP SP2) can connect to the new network but then cannot access the Internet. After being frustrated for a few hours with this I performed a hard reset and then could connect to the default apple network the AX was transmitting. But now I tried creating a new network again and again the same problem. No internet access despite Network Status indicating otherwise. Please help! I purchased this product b/c I thought it was supposed to be an easier setup.

Welcome to Apple Discussions
Sorry, but the 169.x.x.x IP address is internally generated by the iPod (and iPhone) and indicates that a network has been detected but no IP address has been issued. Your friends iPhone was not connected to your ad hoc network either - it connected to the internet through the 3G network.
You should read through the Vista help screens on ad hoc networking for some insight how this works. You should be able to get some ideas there.
In the mean time, $40 or less will buy you a very capable wireless router with four Ethernet ports and will simplify your network tremendously. Having used Windows ICS for a long time, the addition of a router and a real network simplified things so much.

Cannot connect to camera via internet

I connect with my camera WVC54GCA in my local network,but when i try from somewhere else nothing happens.I use the domain name i took from TZO but i cannot access the camera.I have also forwarded the ports 80 and 1024 from the router.Any idea please???

thanks Gollum,
I have used TZO free 1year, quite easy to use.
Things seem to work now but I need some confirmation my pc are not open to the world now.
Can you please help me ?
Camera settings :
ddns activated with TZO provider. domain name, email, tzo keys written as received via email ; update period : every 24h at 12h
upnp activated in discover mode only (??? what is it ?)
axess port substitute : 1024
rtp/rtsp : 554,5000,1400 (?)
rtp/rtsp multicast : desactivated
basic parameters :
camera name : mycamera1
config : fix IP 192.168.1.110
subnetwork:255.255.255.0
gateway:192.168.1.1
main domain : 195.238.2.21 (what is it ???)
secondary domain : 195.238.2.22 (???)
ssid : myssid
type of network : infrastructure
security : wep
on Linksys wag200g router :
dhcp activated and start at 192.168.1.100
encapsulation : RFC2516 PPOe
Multiplexing : LLC
QS:UBR
DDNS : desactivated
Applications and games : transfer of unique connexion : http,out:80;in:80;protocol tcp
DMZ : activated
When I desactivate and use in Firefox : http://mondialpigeons.linksys-cam.com and then user and pw, I am in the router setup !!!
when I activate, I am on linksys web page
2. Is there a way to show video without showing all axess menus and linksys logo to the world ?
thanks for help
best regards
Marc

New Q10 cannot connect to Link via USB

Hi everyone, I've run into a problem with my new Blackberry Q10 (text messages getting stuck in the notification window) and, seeing as I've had it less than a month, my retailer has ordered me another Q10 and is going to send the old one back.
Now, my understanding is that if I backup my phone to my computer it will save all of the changes I've made regarding ring tones, notifications and other settings so when I get the new one I can just plug it in, say go and have the new phone essentially set up exactly the same as the old one.
Problem is that Blackberry Link has been unable to connect to my phone via usb. I am using Windows 7, have tried a few different usb ports (one of which I use to configure/update my ipad and ipod) but nothing has helped. There is no error message, the status indicator on the phone just stays on "not connected". The computer makes the "device connected" sound whenever I plug the phone in and the phone is able to charge and recognize that it is connected to a computer but for some reason Link still does not recognize it. It is, however, able to connect through wifi...
Any ideas?
Thanks,

Win 7, great OS, Phone same version as me and mine is 100% working, Link recent, should all be good. You might have to Security Wipe to resolve this but lets try to find the issue as BB Link is not working so you cannot Reload the OS and SW will delete all data on the phone. Alittle different steps then the other ones: Uninstall BB Link, using Windows Search (Advanced and searching Everywhere) find and delete all blackberry files found. Go to Device Manager, find all the Blackberry and Rim drivers and uninstall them, do this with your phone disconnected, so to see all of them in Device Manaer click View on the Menu then click Show hidden devices then expand the + sign. I do not have Win 7 but the drivers are usually found in these 6 places: 1 Blackberry2 Disk drives3 DVD/CD4 Modems (Standard Modem only)5 Network Adapters6 Ports Power OFF your computer (not a restart) Power ON and wait 5 min. plugin your phone and wait another 5 minutes before Installing BB Link Before you do all this please tell me your Anti-Virus program (full name and version #) and if you use a 3rd party Firewall I will check to see if they are compatible with your system or you can check here: http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/Home Enter just the anti-virus name in the Search, find your version and click it, next page change the drop down menu to Win7

Cannot connect to Exchange via Activesync

I recently updated my Z10 to 10.2.1.2726 and so far cannot get active synce to connect. Any ideas on how I can fix this without going back to 10.1?
David Nottingham

Well, at first I was going to suggest redoing the entire AutoLoader process, but this time not doing any restore...sometimes, a backup file contains the very corruption one needs to eliminate, and restoring from it simply reintroduces that corruption.
But then, you said...
dnottingham4 wrote:
For troubleshooting I have tried to activate on Wifi only on multple networks and the same result is that i get the error message of:
"Your login information for accout (accoiunt name) has changed or is incorrect. Update your login information and try again."
And that brings up other thoughts...things like being 100000% certain you are entering the proper credentials, especially when it comes to upper and lower case characters, special characters, etc. Also being sure to validate those exact credentials via other methods (e.g., WebMail to that service provider). There also could be other causes, for example:
Article ID: KB35952 "Your login information for account has changed or is incorrect. Update your login information and try again." when BlackBerry 10 is integrated with Microsoft Office 365 ActiveSync account
Article ID: KB34651 Gmail account on the BlackBerry 10 smartphone becomes invalid intermittently with the error "Your login information for IMAP server [imap.gmail.com] has changed or is incorrect. Please check your account settings."
There could be other KBs...you can search that database for more.
Otherwise, I guess that I would indeed recommend what I started this particular post with...reload and do not restore.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Cannot connect to switch via IE

Similar Messages

Maybe you are looking for