Cannot connect to Tengo Internet at KOA

I just rolled into the Santa Fe KOA and they use TENGOINTERNET.COM to provide WiFi services for guests. You first connect to their WiFi router and then when you access the Internet, you are moved to a special TENGOINTERNET.COM login screen where you enter in the guest id and password. This validates you and you are good to use the internet for 24 hours or so.
My MacBook Pro happily logs into the network. My iPad and my iPhone4 get to the point where you click on the submit button and then the spinning wheel of forever turns and you get no further. I'm suspicious that they use Flash but am not sure.
I found one tip to disable JavaScript under Safari Preferences on the iPad and I also turned off the popup blocker setting. It did no good, I could not log in.
This will affect whether or not I go to any KOA that uses TENGO as a service provider. I'm also submitting a fairly positive review of the KOA except for its use of TENGO.
TENGO does not seem to care.
Lee

pinckbrown wrote:
Bob the Fishermam : It doesn't matter if flash is widely used. HTML5 is a better technology that will replace flash. Remember the outcry when Apple stopped including floppy disks! Flash has nothing to do with Lees Tengo Internet problem.
Pinckbrown
I was not commenting on floppy disks, html5 or other technology. I am very familiar with html5 but it has nothing to do with the OP's post. I was commenting on the OP's argument about flash. Regardless FWIW, here is a post paraphrased from Tengo's site which may help the OP.
Referring to the Apple devices, connecting to TengoInternet's WiFi network with an iPod Touch or an iPhone, and maybe the iPAD can be a challenge because of the way the built-in Safari browser on the device handles the "I Agree" page layout. The best way for these devices to successfully connect to the TengoInternet is to follow these steps:
- Open Settings > Safari
- Turn Javascript off
- Open Safari again to be directed to the "I Agree" page
- Accept the terms and conditions by clicking the "I Agree" button
- Re-open Settings > Safari and turn Javascript back on
The site also states that a single user login is allowed at a time. So if the OP is already logged in with one device and tries to log in with another device, the first login will be disconnected. But from the OP's description "My MacBook Pro happily logs into the network. My iPad and my iPhone4 get to the point where you click on the submit button and then the spinning wheel of forever turns and you get no further." this does not sound like his issue.
Message was edited by: BobTheFisherman

Similar Messages

  • Cannot connect to tengo internet

    Please help with log in procedures for tengo internet?????

    Can I use my iPhone or iPod Touch on the WiFi Network?
    Yes. However connecting to TengoInternet's WiFi network with an iPod Touch or an iPhone can be a challenge because of the way the built-in Safari browser on the device handles the "I Agree" page layout. The best way for these devices to successfully connect to the TengoInternet is to follow these steps:
    - Open Settings > Safari
    - Turn Javascript off
    - Open Safari again to be directed to the "I Agree" page
    - Accept the terms and conditions by clicking the "I Agree" button
    - Re-open Settings > Safari and turn Javascript back on
    Above from:
    http://www.tengointernet.com/faqs.html#6

  • Just bought MacBook Pro, cannot connect to the Internet at home. I have wifi at home and my iPad and cell phone can connect to the wifi

    Just bought MacBook Pro, cannot connect to the Internet at home. I have wifi at home and my iPad and cell phone can connect to the wifi

    ***   When you post for help, please state which OS X is installed.
    If you aren't sure, click About this Mac from your Apple menu 
    Troubleshooting advice can depend on that information.

  • My Macbook Pro cannot connect to the internet using an ethernet cord.

    My Macbook Pro cannot connect to the internet using an ethernet cord. It was working fine for weeks, then all of a sudden just stopped. What could the problem be?

    Hi bean07670,
    If you are having an issue with the Ethernet connection on your MacBook Pro, you may find the following article helpful:
    Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
    http://support.apple.com/kb/TS1317
    Regards,
    - Brenden

  • I am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet.  Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

    i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet.  Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • How to restart base station from airport utility? I used to be able to do it remotely  I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose t

    How to restart base station from airport utility? I used to be able to do it remotely
    I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
    With my prior macbook and same time capsule, etc  if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
    Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
    Thanks in advance

    You are likely forgetting a step.
    Open AirPort Utility
    Click on the Time Capsule icon
    Click Edit in the small window that appears
    Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
    Click Restart

  • Cannot Connect to the Internet ?

    So I am a new iPad user
    very new 3 weeks
    It started this morning when I downloaded updates to some of my apps - I then sync'd it with my itunes on my windows vista pc...then i noticed that the iPad screen looked really heavily pixelated in some of the apps, that weren't normally pixelly
    I tried restoring my settings on the iPad only, this did not delete my apps or data
    then it asked me for my wifi password again, which I put in
    I then tried to access the internet on safari, and through various other apps, I get the error message, "cannot connect to the internet"
    I tried syncing it again this evening, and still nothing
    I am not sure what to do....

    Have your:
    - Reset your iPad:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Reset network settings:
    Settings>General>Reset Network Settings
    - Powering off and then back on your iPad.
    - The troubleshooting here:
    http://support.apple.com/kb/TS3237

  • My iPad cannot connect to my internet.  the internet is working but not with my ipad.

    my iPad cannot connect to my internet.  the internet is working but not with my ipad.

    Call your ISP (Internet Service Provider) and explain them your issue, it could range from having your router configured incorrectly to having a wiring issue. Personally, I have Comcast and they are great, no issues, and awesome customer service.
    Hope you get up and running ASAP

  • I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

    I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

    Welcome!
    Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
    To get fast wireless without buying more than one thing, consider this:
    http://eshop.macsales.com/item/Edimax/EW7722IN/
    It goes in an available PCI slot
    There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
    USB wireless "dongle:"
    Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
    USB PCI adaptor:
    http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
    Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner.

  • TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

    iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
    as i said i have two iphone 4S,,,,,
    1st one --- has os 5.1
    2nd one has os 6.0
    i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
    but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
    plz reply asap...!!!
    thnxxx in advance!!!

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I cannot connect to the internet through my Mozilla firefox, I am being forced to use Internet explorer how do I fix Mozilla I tried a few of the suggestions on your website but nothing works.

    I cannot connect to the internet using my Mozilla firefox, but can connect with Internet explorer. How do I fix the problem. I tried some options on your website but nothing is correcting the problem.
    == yesterday ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; InfoPath.1; IEMB3; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; IEMB3)

    Try clearing your cache and cookies.
    # Open the Tools menu, then select Clear Recent History... .
    # In the '''Time Range to clear:''' drop-down, select '''Everything'''.
    # Click the arrow next to '''Details''' to display the list of items that can be cleared.
    # Select both '''Cookies''' and '''Cache'''.
    # Click Clear Now .
    Or you can try creating a test profile to see if it happens on that profile as well. See [[Managing Profiles]]

  • I have 2 Apple TV's in my home. When I attempt to login, is say cannot connect to the internet.  I have reset both Apple TV's and also restarted them both.but still cannot connect to the internet.  I al reset my router and still not change

    I have 2 Apple TV's in my home.  One is 2nd Generation and the other is 3rd Generation.  One one that is 2nd Gen cannot connect to the internet.  First I restarted, the I rest it and I even changed the password. still no connection.  So I purchased the 3rd Gen TV and I have to same problem, but they are in different rooms.  Before I had no problem with my 2nd Gen TV, but then one day it did not connect.  I even had my internet provider come and check my internet and it worked ok, but no connection with the Apple TV.  I have tried everything but no results.  Somebody please help me.
    Regards,
    Richard

    Hi richardwilliams51,
    If you are having difficulty connecting to the Internet using your Apple TV, I would suggest troubleshooting using the steps in this article -
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS4546
    If that does not completely fix your Apple TV, you may need to restore it, using this article -
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/kb/HT4367
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Your Apple TV is connected to your wi fi network but cannot connect to the internet.  Airplay logo not available on ipad3, iPod touch3g and showing intermittently in iTunes on windows laptop.  Switched ISP a few days ago.  Entered pass key info on all.

    I switched ISP a few days ago and had problems with airplay since.  After restarting and reinstalling and updating, re entering pass keys for new wi fi on everything,  Apple TV shows:  Your Apple TV is connected to your wi fi network but cannot connect to the Internet.  Ipad3 and iPod touch 3G have no airplay icon or get one briefly then it disappears again.  Same with itunes on windows laptop.
    Can anyone help?
    Bob

    Welcome to the Apple Community.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • NB200 Can connect to wireless networks, but cannot connect to the internet

    I have been able to connect my Win XP netbook to my secure wireless network at home, other people's networks and public networks like the library and McDonalds. This week I'm away from home and discovered that while I can still connect to a number of different wireless networks, I cannot connect to the internet using Internet Explorer.
    I've had this problem once before and fixed it by reinstalling Windows XP and all my other software. I have no idea why it has happened again. I'm hoping for a less drastic solution to the problem..?

    Hi Nakia,
    > I cannot connect to the internet using Internet Explorer.
    Have you tested other browsers like Mozilla Firefox and does this work?
    As MasterG wrote try to renew the IP address using the commend line.
    Last week I had a similar problem and I could solve it by updating the WLAN driver. Just remove the driver, restart the notebook and install the newest one. :)

  • "Router (WRH54G) cannot connect to the internet."

    My router cannot connect to the internet. I get this message everytime I configure the router using the CD. I connected the internet cable to the internet port,connected the ethernet cable to one of the four ports to the LAN and the power cable to power source to the power slot of the router. Can you please help me on this?

    castor wrote:
    Well tell me who provides you with the Internet Service & accrodingly i will give you the information.
    Smartbro Communications in the Philippines.

Maybe you are looking for

  • How do i use my HDMI cable with my macbook pro?

    I just bought an HDMI cable and an adaptor to use with my Macbook Pro and I am having trouble setting it up correctly. I have it hooked up to my computer and TV and when I open my computer the galaxy screen savor just stays on my TV screen. What do I

  • How to get KB/s

    so I'm making a file transfer program (one computer to another) and I want the transfer speed to show up in KB/s. I'm using an ObjectOutputStream that sends a byte array, then an ObjectInputStream reads one byte at a time... It would probably work to

  • Standard Query (Sq01) for Leave Details

    Hi Experts, I have created a query using SQ01 for Leave Details which includes all infotypes required viz. 2001, 2002 etc. When i use this query for any employee using any subtype/absence type, it works fine, but when i use it for a particular type i

  • ITunes 8.1 Crashing Immediately upon Startup

    I have reproduced the crash report below. Can somone decode it for me and instruct me on some steps I could take to correct the problem? Thank you. Process: iTunes [189] Path: /Applications/iTunes.app/Contents/MacOS/iTunes Identifier: com.apple.iTune

  • Can't un-pause printer

    I have a Konica-Minolta Magicolor 2450 printer that is my default printer.  Somehow it has been paused - though I don't know how that happened - and I can't un-pause it.  I have checked Help Center but everything it says to do I can't.  For example,