Cannot connect to the admin page for my E900

A while ago I was doing some port forwarding to set up a game server. I couldn't get the port to stay open and was messing around a bit with different things. Now I can't access the admin page at all. It keeps giving me a "The Connection Reset" error. I've reset my router twice, but that hasn't done much. I can still access the web just fine. I did a quick google search and saw something about my router and modem might be on the same IP. If so, how would I check this, and how would I fix it?

Does your computer still have access to the internet? Maybe your computer is getting another IP address, or worse, it's not getting anything at all. Check it first. Follow this link on how to do that.
Checking your computer’s IP address
http://kb.linksys.com/Linksys/GetArticle.aspx?docid=d02ed3aa3e704caea42f5c007b8c6472_3996.xml
Whatever default gateway/router your getting is the one you need to enter on the address bar.

Similar Messages

  • I cannot connect to the login page of my banking websites for Firefox but can from IE also firefox does not close when I shut it down I have just done a clean instal of windowsws7 and teh problem persists on reinstall of FF3.6.13

    I can connect with my banking websites but the login page will not come up. This is a recent occurrence and I have done virus scans and have also recently done a clean instal of Windows 7. The problem persists. I can connect to any other website with no problems. When I close FF it appears to close and Task manager shows as not running but it will not reopen. If I attempt to uninstall I am told that FF is running and needs to be closed. I have to reboot to get to close and be able to reopen.
    I can connect to the bank sites with IE. However I really don't like IE.
    I am using Win7 Professional on a Sony notebook VGN SZ55

    I don't have an answer, but I experienced the same problems trying to set up an airport express to route traffic to my stereo.
    Apple Extreme router, iMac and laptop all worked just fine for months, upon installing Airport Express (step by step, according to instructions), all **** broke loose. Airport Utility was unable to see my Airport Extreme router, after hours of rebooting computer, cable modem, router, and finally a hard reset of the Airport Extreme router, it is finally recognized by Airport Utility again.
    Recreated network, iMac connects to the internet just fine, laptop (Macbook Air) connects to the network just fine, but will not connect to the internet. Network diagnostics does not help, it gets to the "do you have a router? If so, reboot" stage, and never seems to see the router.
    Any suggestions?

  • Directories on 2 machines. Connect to 1 using console program on the other : "Cannot connect to the Admin Server.The url is not correct or the server is not running." URL is ok, server  is running.

     

    Which version of iDS ?
    Could you show us the URL ?
    I think 4.x Admin Server has the IP address of the hosts that can connect in its configuration. If both servers have 2 different configuration Directory and 2 admin servers, that is eventually where to look for a solution.
    Regards,
    Ludovic.

  • Problems connecting to the Admin Server

    My browser can't connect to the Admin Server. Why not?
    <P>
    If you cannot connect to the Admin Server, ensure that the masks of
    Hosts and Addresses entries in /admin-serv/config/ns-admin.conf
    include the host and address you are connecting from. After changing
    these parameters, stop and start the Admin Server by running the shell
    scripts /stop-admin and
    /start-admin.

    Thanx for the reply Shane.
    i had just stumbled upon the imap log before seeing your answer. i've found and fixed the problem.
    the imap log showed the following message
    Access to imap service for user@domain denied from client address (*mailAllowedServiceAccess)while the http log showed the following message
    Access to smime service for user@domain denied from client address (mailAllowedServiceAccess)after some digging, i understood that th mailAllowedServiceAccess is a user profile property.
    For my non-admin user, it was set to +imaps:ALL$+pops:ALL$+smtp:ALL$+http:ALL i modified it to include simple imap and the problem was solved.
    ps: some threads that pointed me in the right direction
    [http://forums.sun.com/thread.jspa?threadID=5361414]
    [http://forums.sun.com/thread.jspa?forumID=708&threadID=5099841]
    [http://forums.sun.com/thread.jspa?forumID=708&threadID=5401855]
    Thank you very much for your help
    Pier

  • When I try to do anything with the App store I get the message "Cannot connect to the iTunes Store". I have internet connections and I have tried resetting the password.

    I cannot connect to the iTunes store for any purpose. When I try I get the message: "Cannot connect to the iTunes Store". That is all. I have tried a lot of different things except , obviously, the correct thing.

    HI ...
    Try this support article > Can't connect to the iTunes Store

  • Can't save BISM file pointing to excel sheet (data source). ErrMsg: "There were errors found while validating the page: Cannot connect to the server or database."

    Hi,
    Me and a collegue is administrering our new enterprise BI portal in SharePoint 2013 (On Premise) and have a problem with using a specific Excel file including general ledger data as data source through a BISM file.
    This particular BISM file can't be saved without getting the error message "There were errors found while validating the page: Cannot connect to the server or database."
    BISM files against other Excel sheets and sources (for example SSAS tabular databases) works well.
    Can anyone help us pinpointing whats wrong here, this is a really important stakeholder in our organization requesting this reporting?
    Cheers!

    Hi E.SWARD ,
    My self created a Power pivot excel then i want to use this excel to create BI file . Still i am getting the same error . Pls help me to resolve this issue
    Cannot connect to the server or database.
    I am getting the similar error , if i use Tabular analysis server instance .
    Subhash

  • Cannot connect to the internet it has been connected to for a year.

    Monday my Apple TV worked fine. Yesterday, it wouldn't connect to the WiFi it had been connected to for a year. I tried to hardwire it to the apple extreme and it slowed my network down to a snails pace.  I bought a new Apple TV last night and it worked fine all night. Now, after being in sleep mode, same issue. Cannot connect to the network.

    Hi Jeff,
    Thanks for the suggestion, but I tried that page and there was nothing on it that solved my issue. I ended up calling Apple Support for help and was advised there have been issues with the latest update of Apple TV. The strange thing was that after I had it unplugged for a few days, I plugged it in while on the phone with support and it worked again. The rep gave me his email/phone and asked me to call him back if I have the issue again. Apple is aware of the issue.
    Happy to have my Apple TV back.
    Wade

  • "System cannot connect to the application server" (Admin Client only)

    Hello Experts,
    I have a strange issue: I am getting "system cannot connect to the application server" when I am trying to launch BPC Admin.
    I successfully connect to the same application server with Excel client on the same PC.
    I am able to connect via Admin from another PC.
    The installation in question is a new installation. The only difference between my PC and a troubled one is IE7 vs. IE8 - IE8 is the one giving issues.
    BPC site is in Local Intranet zone. Windows Authentication is enabled. What am I missing? Local Policy? IE8 settings? Folder permissions (I'm local admin on both PCs)?
    It's BPC 7.5 SP05.
    Thanks in advance,
    Akim
    P.S. OS: Windows Server 2003 SP2 32-bit (Citrix box).
    Edited by: Akim Zubarchuk on Mar 30, 2011 12:28 AM

    Hi Akim,
    Check client diagnostic for admin client can provide good information.
    Any way if you are able to connect with excel client not with admin client I will say:
    1. Check the rights of user used to connect with admin console
    2. Check proxy settings
    3. Disable antivorus or firewall into that computer.
    4. Make sure the installation of admin client was correct done.
    In my opinion it is a big probability to be point 3 or 4.
    Regards
    Sorin Radulescu

  • I can't connect to facebook. Keeps saying cannot connect to the internet but I am on the internet and can access web pages etc.

    I can't connect to facebook. It keeps saying cannot connect to the internet but I am connected as I can access we pages with no problem

    Hello there, Patrick.
    The following Knowledge Base article offers up some great steps to try when troubleshooting issues with an app you've downloaded to your iOS device:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"?

    I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"? I have back up in the past but the last month I have not. I really want to keep the data.
    So how can I go in and change the setting, It stays ofcourse at the apple screen with wheel. All info is there and the computer works fine, just cannot use it or have been able to log in.

    wjosten is spot on.  If you really want iCloud, then you will need to acquire a new or second hand MBP that can run Lion.
    Ciao.

  • I cannot connect to the iTunes Store.  I receive Error Code -1202.  This problem began yesterday.  I have been successfully connecting to the store for months on this PC.  I am running Windows 7 and the Windows Security Center.  Thanks for any help

    TS1368 I cannot connect to the iTunes Store.  I receive Error Code -1202.  This problem began yesterday.  I have been successfully connecting to the store for months on this PC.  I am running Windows 7 and the Windows Security Center.  Thanks for any help.

    Hello alankilner,
    And welcome to Apple Discussions!
    Using Proxy: Yes
    Try temporarily disabling this setting by following the steps outlined in this Apple support document.
    http://support.apple.com/kb/TS1490
    B-rock

  • How to restart base station from airport utility? I used to be able to do it remotely  I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose t

    How to restart base station from airport utility? I used to be able to do it remotely
    I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
    With my prior macbook and same time capsule, etc  if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
    Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
    Thanks in advance

    You are likely forgetting a step.
    Open AirPort Utility
    Click on the Time Capsule icon
    Click Edit in the small window that appears
    Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
    Click Restart

  • TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

    iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
    as i said i have two iphone 4S,,,,,
    1st one --- has os 5.1
    2nd one has os 6.0
    i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
    but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
    plz reply asap...!!!
    thnxxx in advance!!!

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • When I select a title in the iTunes Store and click on Play in iTunes I am sent to the download page for iTunes 10 which I have already. The selected title cannot be found anywhere in my iTunes. How can I get the title in iTunes with possibility to buy it

    When I select a title in the iTunes Store and click on Play in iTunes I am sent to the download page for iTunes 10 which I have already. The selected title cannot be found anywhere in my iTunes. How can I get the title in iTunes with possibility to buy it?

    The issue is that your credit or debit card credentials must be associated with the same country where you reside in order to purchase iTunes content.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching the billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations, although it’s worth nothing that features like iTunes in the CLoud and iTunes Match are designed to work best when using a single iTunes Store account, as you can only switch accounts with these services every 90 days."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article

  • Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

    When opening a form in SharePoint 12013 that was created from Infopath 2013, I get the following error.
    You do not have permissions to access a database that contains data required for this form to function correctly.
    An entry has been added to the Windows event log of the server.
    Log ID:5566
    When I go to the log files on the SharePoint server. I see the following error.
    Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
    I am guessing this has something to do with the UDCX connection and the database.
    Can anyone help me get this fixed?

    Hi Jim,
    Please check the following kb article when it occurs 5566errro with the UDCX conection file, try the method of using the Secure Store Service to store alternate credentials for the data connection method, or the method of stating the credentials
    in the UDC file explicitly.
    Also check if it could help with setting sql server as "SQL Server and Windows Authentication mode".
    http://support.microsoft.com/kb/981684
    Thanks
    Daniel Yang
    TechNet Community Support

Maybe you are looking for