Cannot connect to the Database

Hi,
We are trying to install only an SAP MDM 7.1on windows 2003 Server/Oracle 10.2.0.4. We are facing issues in connecting it to the database.
When I try to mount a repository by giving the hostname and login credentials of the database(user id : System which works on OS Level). The following message is displayed.
"Unable to connect with database server"
Could you please suggest a solution.
Regards,
Renu

You should also check the info under: https://service.sap.com/installMDM -->MDM 7.1. -->Installation Guide for Windows >4.4 Installing and Configuring the Database>4.4.2 Oracle DBMS:
1)do you use the correct charachterset for your DBMS?
2)tnsnames.ora was set correctly? What is the output of the command "tnsping <net service name>"? what is the output of sqlplus <userid>/<password>@<net service name>?
3)Have you intalled the Oracle Client, too?
4)On the MDS host, run the Net Manager to make the DBMS known to Oracle clients. In this case, the
MDS is an Oracle client.
5)Are you sure that the ports used by MDM are open? Only if MDS, DBMS or MDM Console are located on different machines. The default ports are as follows:
MDS:
Port 59950 and three sequential ports
from the range 2000 - 9999 for every
loaded repository (the repository ports
are configurable using the MDM
Console).
The error you can see in the MDS_Log can be also useful cause "Unable to connect with database server" can be caused by many reasons!
I hope this helps.
Regards,
Gabor

Similar Messages

BIB-16633 Cannot connect because the database version is incompatible with

BIB-16633 Cannot connect because the database version is incompatible with Feb 15, 2005 9:28 PM
Reply
why is this?
oracle.dss.connection.common.ConnectionException: BIB-16633 Cannot connect because the database version is incompatible with this BI Beans version.
at oracle.dss.connection.server.drivers.mdm.MDMConnectionDriverImpl.connect(MDMConnectionDriverImpl.java:147)
at oracle.dss.connection.server.ConnectionImpl.connect(ConnectionImpl.java:285)
at oracle.dss.connection.client.Connection.connect(Connection.java:425)
at oracle.dss.connection.client.Connection.connect(Connection.java:342)
at oracle.dss.addins.designer.OLAPSource.test(OLAPSource.java:284)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel.testConnection(OlapPanel.java:244)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel.btnTest_actionPerformed(OlapPanel.java:378)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel$3.actionPerformed(OlapPanel.java:120)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:141)
at java.awt.Dialog$1.run(Dialog.java:540)
at java.awt.Dialog.show(Dialog.java:561)
at java.awt.Component.show(Component.java:1133)
at java.awt.Component.setVisible(Component.java:1088)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.dss.addins.wizard.configFileEditor.ConfigFileEditorWizard.run(ConfigFileEditorWizard.java:229)
at oracle.dss.addins.designer.BIDesignerImpl.editConfigFile(BIDesignerImpl.java:1428)
at oracle.dss.addins.designer.BIDesignerAddin.openBIDesignerSettings(BIDesignerAddin.java:990)
at oracle.dss.addins.designer.BIDesignerAddin.actionPerformed(BIDesignerAddin.java:807)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:289)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1113)
at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(BasicMenuItemUI.java:943)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Lisa Sherriff
Posts: 137
OTN Member Since: Jan, 2001
Re: BIB-16633 Cannot connect because the database version is incompatible w ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 16, 2005 1:32 AM
Reply
Hi,
From the 10.1.2 BI Beans Install Guide it says:
OracleBI Beans supports data stored in Oracle9i Enterprise Edition or Oracle Database 10g Enterprise Edition. However, only particular releases and patchsets are supported:
* Oracle9i Release 2 Enterprise Edition, as follows:
o 9.2.0.6 for all platforms.
o 9.2.0.5 with the latest OLAP patch for Windows-only.
* Oracle Database 10g Release 1 Enterprise Edition with the latest OLAP patch.
From the error message it would appear that the Database is not one of the above.
Thanks,
Lisa
JDev QA
401488
Posts: 48
OTN Member Since: Aug, 2002
Re: BIB-16633 Cannot connect because the database version is incompatible with ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 18, 2005 8:01 PM
Reply
Hi,
Please note that we have follwing versions of DB up and running:-
1)Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
2)Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning and Real Application Clusters options
JServer Release 9.2.0.5.0 - Production
Pls let us know the solution to resolve this problem ASAP.
Thanks.

You are not using a supported version of the database. BI Beans/OLAP only support the following database versions:
10g - 10.1.0.3 with additional OLAP patch
9i - 9205 with additional OLAP patch
9i - 9206
I would suggest that you have not applied all the required database patches to your instance.
Hope this helps
Business Intelligence Beans Product Management Team
Oraclc Corporation

Cannot connect to the database. java.sql.SQLException:

Hi,
I am trying to connect to Pointbase database through an applcation written under J2EE environment. I am able to connect with other database under Pointbase. I am trying to connect using the code as follows:
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con=DriverManager.getConnection("Jdbc:Odbc:study", dbUserID, dbPassword);
and I am getting the Exception as shown delow :
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: access denied (java.lang.RuntimePermission exitVM)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:372)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:306)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:253)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:324)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:311)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:205)
root cause
java.security.AccessControlException: access denied (java.lang.RuntimePermission exitVM)
     java.security.AccessControlContext.checkPermission(AccessControlContext.java:269)
     java.security.AccessController.checkPermission(AccessController.java:401)
     java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
     java.lang.SecurityManager.checkExit(SecurityManager.java:736)
     com.sun.enterprise.J2EESecurityManager.checkExit(J2EESecurityManager.java:70)
     java.lang.Runtime.exit(Runtime.java:88)
     java.lang.System.exit(System.java:715)
     org.apache.jsp.login_jsp._jspService(login_jsp.java:76)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:141)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:325)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:306)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:253)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:324)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:311)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:205)
note The full stack trace of the root cause is available in the Sun-Java-System/Application-Server-PE-8.0 logs.
Sun-Java-System/Application-Server-PE-8.0
Please help.
NNJ

Thanks for the reply. I have attached the server.log herewith :
[#|2008-10-05T11:44:45.945+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.admin|_ThreadID=12;|ADM1006:Uploading the file to:[C:\Documents and Settings\Administrator\Local Settings\Temp\s1astempdomain1server-1629282413\server\study.war]|#]
[#|2008-10-05T11:44:45.955+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.admin|_ThreadID=12;|ADM1007:Uploaded the remote file at: [C:\Documents and Settings\Administrator\Local Settings\Temp\s1astempdomain1server-1629282413\server\study.war]|#]
[#|2008-10-05T11:44:46.225+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.admin|_ThreadID=12;|ADM1041:Sent the event to instance:[ModuleDeployEvent -- undeploy web/study]|#]
[#|2008-10-05T11:44:46.686+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.admin|_ThreadID=12;|ADM1042:Status of dynamic reconfiguration event processing:[success]|#]
[#|2008-10-05T11:44:47.947+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.deployment|_ThreadID=12;|DPL5109: EJBC - START of EJBC for [study]|#]
[#|2008-10-05T11:44:47.977+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.deployment|_ThreadID=12;|Processing beans ...|#]
[#|2008-10-05T11:44:47.987+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.deployment|_ThreadID=12;|DPL5110: EJBC - END of EJBC for [study]|#]
[#|2008-10-05T11:44:48.158+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.deployment|_ThreadID=12;|Total Deployment Time: 2043 msec, Total EJB Compiler Module Time: 40 msec, Portion spent EJB Compiling: 1%
Breakdown of EJBC Module Time: Total Time for EJBC: 40 msec, CMP Generation: 0 msec (0%), Java Compilation: 0 msec (0%), RMI Compilation: 0 msec (0%), JAX-RPC Generation: 0 msec (0%),
|#]
[#|2008-10-05T11:44:48.278+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.deployment|_ThreadID=12;|deployed with moduleid = study|#]
[#|2008-10-05T11:44:48.378+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.admin|_ThreadID=12;|ADM1041:Sent the event to instance:[ModuleDeployEvent -- deploy web/study]|#]
[#|2008-10-05T11:44:48.488+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.container.web|_ThreadID=12;|WEB0100: Loading web module [study] in virtual server [server] at [study]|#]
[#|2008-10-05T11:44:51.202+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.admin|_ThreadID=12;|ADM1042:Status of dynamic reconfiguration event processing:[success]|#]
[#|2008-10-05T11:46:06.771+0530|WARNING|sun-appserver-pe8.0|javax.enterprise.system.stream.err|_ThreadID=16;|Cannot connect to the database. java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified|#]
[#|2008-10-05T11:46:06.871+0530|SEVERE|sun-appserver-pe8.0|javax.enterprise.system.container.web|_ThreadID=16;|StandardWrapperValve[jsp]: Servlet.service() for servlet jsp threw exception
java.security.AccessControlException: access denied (java.lang.RuntimePermission exitVM)
     at java.security.AccessControlContext.checkPermission(AccessControlContext.java:269)
     at java.security.AccessController.checkPermission(AccessController.java:401)
     at java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
     at java.lang.SecurityManager.checkExit(SecurityManager.java:736)
     at com.sun.enterprise.J2EESecurityManager.checkExit(J2EESecurityManager.java:70)
     at java.lang.Runtime.exit(Runtime.java:88)
     at java.lang.System.exit(System.java:715)
     at org.apache.jsp.login_jsp._jspService(login_jsp.java:76)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:141)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:325)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:306)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:253)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:311)
     at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:205)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:283)
     at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:102)
     at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:192)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:261)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:215)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:200)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:180)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
     at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:582)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
     at com.sun.enterprise.webservice.EjbWebServiceValve.invoke(EjbWebServiceValve.java:134)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
     at com.sun.enterprise.security.web.SingleSignOn.invoke(SingleSignOn.java:254)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
     at com.sun.enterprise.web.VirtualServerValve.invoke(VirtualServerValve.java:209)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:161)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
     at com.sun.enterprise.web.VirtualServerMappingValve.invoke(VirtualServerMappingValve.java:166)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:979)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:211)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:692)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:647)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:589)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:691)
     at java.lang.Thread.run(Thread.java:534)
|#]
regards,
NNJ

Developer2000 will not connect to the database

HELP!!! I cannot connect to the database -Oracle 8.0.5 from developer2000 v2.1- forms ( or reports)!! i can get to sql plus and I can start the database also. HELP!!! i log on as scott/tiger and as system/manager but of no avail. Are there any TNS or registry entries that needs to be changed.

Hi,
I think you want to post this to the Forms 6i or Oracle Reports forums. This the JDeveloper forum, a different product from Developer2000.

Can't connect to the database server from localhost

Hi,
I'm having a problem I hope you can help with please!
I recently installed mysql and phpmyadmin... I can access mysql perfectly from the command line, and can access it partially through phpmyadmin although there are some restrictions that I haven't figured out how to change yet (despite editing php.ini, configure.inc.php and others), but on the whole inside phpmyadmin I can see all the databases I've uploaded with the command line and all the users are there and can be edited. Unfortunately whenever I try to connect to a mysql database using a username and password that was created in phpmyadmin (or anywhere!), I get a 'cannot connect to the database server error'. I've checked and rechecked the username, the passwords, the database names and the host names a thousand times but nothing I change is working.
Is there a special prefix my mac could be adding to the database, usernames or host names?
Thanks!

Okay, don't worry!
I finally figured it out...
it needed to be 127.0.0.1 rather than localhost!

Can't save BISM file pointing to excel sheet (data source). ErrMsg: "There were errors found while validating the page: Cannot connect to the server or database."

Hi,
Me and a collegue is administrering our new enterprise BI portal in SharePoint 2013 (On Premise) and have a problem with using a specific Excel file including general ledger data as data source through a BISM file.
This particular BISM file can't be saved without getting the error message "There were errors found while validating the page: Cannot connect to the server or database."
BISM files against other Excel sheets and sources (for example SSAS tabular databases) works well.
Can anyone help us pinpointing whats wrong here, this is a really important stakeholder in our organization requesting this reporting?
Cheers!

Hi E.SWARD ,
My self created a Power pivot excel then i want to use this excel to create BI file . Still i am getting the same error . Pls help me to resolve this issue
Cannot connect to the server or database.
I am getting the similar error , if i use Tabular analysis server instance .
Subhash

SharePoint 2007:Cannot connect to the configuration database.

The share point 2007 server under Windows Server 2008 R2 runs well formerly, but suddenly the user can't visit the site with error on page:
Cannot connect to the configuration database.
I also checked windows log with bellow main errors：
Log Name:      Application
Source:        Office Server Search
Date:          2015/2/28 22:30:47
Event ID:      10034
Task Category: Gatherer
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ***
Description:
Could not access the Search service configuration database.
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Office Server Search" />
    <EventID Qualifiers="49152">10034</EventID>
    <Level>2</Level>
    <Task>3</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-28T14:30:47.000000000Z" />
    <EventRecordID>2323514</EventRecordID>
    <Channel>Application</Channel>
    <Computer>***</Computer>
    <Security />
</System>
<EventData>
    <Data>
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)</Data>
</EventData>
</Event>
======================================
Log Name:      Application
Log Name:      Application
Source:        Windows SharePoint Services 3
Date:          2015/2/28 22:30:50
Event ID:      5586
Task Category: Database
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ***
Description:
Unknown SQL Exception 64 occured. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows SharePoint Services 3" />
    <EventID Qualifiers="0">5586</EventID>
    <Level>2</Level>
    <Task>484</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-28T14:30:50.000000000Z" />
    <EventRecordID>2323517</EventRecordID>
    <Channel>Application</Channel>
    <Computer>***</Computer>
    <Security />
</System>
<EventData>
    <Data>64</Data>
    <Data>A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)</Data>
</EventData>
</Event>
==================================================
Source:        Windows SharePoint Services 3
Date:          2015/2/28 22:31:00
Event ID:      27745
Task Category: General
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ***
Description:
The description for Event ID 27745 from source Windows SharePoint Services 3 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on
the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows SharePoint Services 3" />
    <EventID Qualifiers="14130">27745</EventID>
    <Level>2</Level>
    <Task>1105</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-28T14:31:00.000000000Z" />
    <EventRecordID>2323520</EventRecordID>
    <Channel>Application</Channel>
    <Computer>***</Computer>
    <Security />
</System>
<EventData>
    <Data>#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.</Data>
</EventData>
</Event>
Please kindly support to find the root cause and guide how to fix it ASAP.
Many appreciations for your hellp in advance!
Note:
1)As checked, SQL server service is running well;
2)Web server log under the path C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\LOGS with bellow errors:
03/02/2015 11:25:53.28 mssearch.exe (0x0F0C)                   0x08FC Search Server Common
GathererSql                   0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx
Line:9654
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          Common
0 Monitorable Application b9f7f366-4027-4923-b5ce-b93c132df7c3, resource 1: pIDBInitialize->Initialize error. Failed to create a non fast load session. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp Line:608
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          Common
0 Monitorable CResourceManager::CreateSession Error creating non fastload session 'Provider=SQLOLEDB;Extended Properties='Server=***;Database=SP_SharedServices_Search;Trusted_Connection=yes;App=Windows SharePoint Services;Timeout=15';'. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp
Line:658
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          UtilCommon
0 Monitorable Dumping error record [0]:   Source: Microsoft OLE DB Provider for SQL Server   HRESULT: 0x80004005   Code: 11   Description: [DBNETLIB][ConnectionRead (recv()).]General network error. Check
your network documentation. - File:d:\office\source\search\common\pkmutild\atldbext.cxx Line:1250
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          GathererSql
0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:9654

Hi,
In this forum we mainly discuss questions and feedbacks about Office products, since your question is about SharePoint, I suggest you post the question in SharePoint forum to get further assistance:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=sharepoint
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Reporting Services Server cannot connect to the DPM database. ( dpm 2010 )

Reporting Services Server cannot connect to the DPM database.
To repair the configuration, follow steps for repairing DPM from DPM Setup Help.
ID: 3001
i can not try the Recommended action from error codes catalog because i did not found Change reporting
password

Hi,
We have had several customers report this after installing DPM 2012 R2.
To get past the below error while scheduling reports to be mailed.
Reporting Services Server cannot connect to the DPM database.
To repair the configuration, follow steps for repairing DPM from DPM Setup Help.
ID: 3001
Perform the following steps as necessary:
1. Created a new local group called "DPMDBReaders$<DPMServerName>"
2. Created a new user called, "DPMR$<DPMServerName>" and added this user to DPMDBReader group that we created on step 1.
3. Open SQL management studio and add the DPMDBReaders$<DPMServerName group to Logins under Security in SQL Management Studio.
4. Modify the properties and under General – change the default database to the current DPMDB name.
5. Under User Mapping – select the current DPMDB name and check the db_datareader checkbox.
6. In SQL Management Studio, navigate to the Databases > DPMDB > Security > Users > and select the DPMDBReaders$<DPMServerName>" group.
Right-click the DPMDBReaders$<DPMServerName>" group and select properties. Under the
Securables section, click on Search. On the add objects dialog, click OK.
On the Select Objects dialog, click the Objects type, then check the
stored procedure checkbox. Browse and add the following two stored procedures
“Prc_MOM_Heartbeat_Get” and “prc_MOM_ProductionServer_Get”.    Grant the Execute permission for both of the stored procedures added.
7. In SQL Reporting Services Configuration manager, under Report Manager URL - click on the link to open the portal (http://localhost/Reports)
      i. Click on the DPMReoprts_GUID to open the DPM reports.
      ii. Click on the DPMReporterDataSource
      iii. On the poperties page, enabled "Credentials stored securely in the report server" on DPMReporterDataSource configuration page and added “DPMR$<DPMServerName>” user account that we created in step 2.
      iv. tick "Use as Windows credentials when connecting to the data source."
      v.   Click ‘Test connection’ on the same page to verify whether it can connect successfully.
8. In SQL Reporting configuration manager - change the Service Account to use build-in account: Network Service
9. Reboot the DPM Server.
10. You should then be able to schedule e-mailed reports.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Application cannot proceed. Internal error occured. Contact your administrator. Error msg: Unable to connect to the database. Please make sure the database information specified in admin/includes/config.php are correct.

After clicking in email link, I get the following message on Firefox page : " The application cannot proceed!
An internal error occured. Please contact your administrator and describe the steps you took before you encounter this error message.Error msg: Unable to connect to the database. Please make sure the database information specified in admin/includes/config.php are correct."
The email asked to install the latest Adobe Flashplayer version to have it working. I installed it, also updated my plug-ins and checked in safe mode that the extensions were not the problem. I also deleted the cookies an cache. Nothing seems to be working so far. I have the lastest version of Firefox 8.0.1 as well as Roboform 7. I noticed that the latest Firefox version has (x86) tagged to it. Does it refers to an 86 bits because my computer uses 32 or 64 bits only. I tried also different browsers and the message kept appearing. How do I resolve this problem?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

Cannot connect to the configuration database

I tried to configure my server with active directory after I have successfully configured sharepoint . For a mistake , they made me delete the active directory and now when I try to connect to the admin section or site page it me give the following error :
"Cannot connect to the configuration database"
Deleting the active directory ; I noticed that all the other users have disappeared and the service : SQL AGENT ( Sharepoint ) not run and the error is :
" This installation of SQL Server Agent is disabled. The edition of SQL Server that installed this service does not support SQL Server Agent." Thank you for the Help

Was the active directory server that you removed the last active directory server in the farm? If so then your only two real choices are to rebuild everything from scratch or restore everything from backup.
If it was just that you were trying to make the SharePoint server into a Domain Controller, then I still think you may need to rebuild. But you can try re-adding the SharePoint server to the Domain. It may have lost its Domain membership when you removed
AD from it and gone back to being a standalone server.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Cannot connect to the configuration database when App Server is down

Hi,
We had a App Server not come up after a restart.
When trying to access a site we get
the "Cannot connect to the configuration database"
We have now started the App Server and everything working again...
My problem, there are 2 WFE servers with NLB Configured apart of the App Server ....Why wont the site work and why cant i connect to config DB?
Something must be misconfigured? Sites should be connecting to the WFE servers and work if App server is down.
Yes, NLB Points to the WFE Servers.
Any ideas where i can look? This is a Project PWA Server, not sure if that will make a difference but the root SharePoint site had the same issue.
Thanks

Hi Danie,
is it possible that the SQL Server is running on the same box as the SharePoint (application) server? This would be the only thing that can explain the symptoms. Please check following:
IP address of the SharePoint Application server by typing nslookup AppServerName on the SharePoint WFE in Command Prompt (cmd.exe). Replace
AppServerName with the FQDN of the application server, e.g. appserver.domain.local
IP address of the SQL server by typing nslookup SQLServerName on the SharePoint WFE in Command Prompt (cmd.exe). Replace
SQLServerName with the FQDN of the SQL server, e.g. sqlserver.domain.local
SQL Server alias configuration by checking the entries in the cliconfg.exe on both SharePoint WFEs
In most cases, SQL server has nothing to do with the SharePoint Application server role and it is stored on the separate box. My guess here is that the farm started as one-server farm setup and over the time got expanded by additional 2 WFEs, moving
Web Server roles from the initial server, leaving it with the application role (service applications) and SQL server on the same box.
But, I am just making an educated guess here. Can you provide some additional information?
Hth,
Aleks

Migration on active directory from 2003 to 2008 and SharePoint error Cannot connect to the configuration database.

Hi all,
In advance i`m thankful for your help,
I come across a problem while migrating the Active Directory from Windows Server 2003 to Windows Server 2008 R2,
SharePoint 2010 is getting this error Cannot connect to the configuration database. The same goes for the Administrative page,
Nothing is change in the MySql database, same log in, same server name, i guess it have something to do with the SharePoint Farm,
My question is will reinstalling the SharePoint do the job? Or is there an easy way to get back on my old track?
I`ve try to sync users... no good
PS C:\Users\administrator.SERVERM> if($configManager.IsSynchronizationRunning()
-eq $false)
>> {
>> $configManager.StartSynchronization($true)
>> Write-Host "Started Synchronizing"
>> }
>> else
>> {
>> Write-Host "Already Synchronizing"
>> }
>>
Can someone explain a little bit more about this:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)
Aleksandar Delcevski, Web-administrator School of Journalism and Public Relations Jurij Gagarin 17-1/1, 1000 Skopje, R. Macedonia t: + 389 2 3090 004 mob: +38972 257 565 [email protected]; www.vs.edu.mk; www.medium.edu.mk; www.unescochair-vs.edu.mk

Hiya,
I don't think it is necessary to reinstall.
You should just confirm that your basic infrastructure is working.
1: On the SharePoint server, open cmd and write ping <SQL server name>
2: On the SharePoint server, open cmd and write nslookup <SQL server name>
Basically the steps outlined here, is the best way to start:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)

Cannot connect to the configuration database Error in HTTPS

Hi
We have a SharePoint 2010 farm ,with more then 20 web application running . I am getting "Cannot connect to the configuration database" error in one web application when we browse through https
The same application is working fine when we browse through http . I am using AAM i have 2 web server which is been network load balanced and the https traffic comes through F5
Kindly help to resolve the issue
Prabakar

HI Prabakar,Check the below URL that exactly related to the issue.
http://expertsharepoint.blogspot.de/2014/05/cannot-connect-to-configuration-database.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

DUPLICATE DB : ORA-17629: Cannot connect to the remote database server

[oracle@ora11g1 ~]$ export ORACLE_SID=sales
[oracle@ora11g1 ~]$ rman target sys/sales@sales
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Jun 5 13:00:15 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SALES (DBID=690066655)
RMAN> connect auxiliary sys/salestby2@salestby2
connected to auxiliary database: SALES (not mounted)
RMAN> DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE SPFILE
2> SET DB_NAME= 'sales'
3> SET DB_UNIQUE_NAME= 'salestby2'
4> SET control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl'
5> SET DB_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/'
6> SET LOG_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/';
Starting Duplicate Db at 05-JUN-13
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=20 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora''";
executing Memory Script
Starting backup at 05-JUN-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=58 device type=DISK
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:26
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database server
continuing other job steps, job failed will not be re-run
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/05/2013 13:05:27
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:27
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database server

Welcome to the oracle forums!
Please take some time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535]FAQ PAGE
Always post 4 digit oracle version and OS details.
Post any query out put between \ \ tags
Mark your questions as answered if you get the answer
Password of SYS user on primary and standby must be same.Copy the password file from primary to standby server
scp $ORACLE_HOME/dbs/orapwv112 <oracle_user@auxiliary_host>:/u01/app/oracle/product/11.2/dbs/orapwdupv112

DPM 2012 R2 Rollup 1 x64.. cant save scheduled report.. gives error: "Reporting services server cannot connect to the dpm database"

The error also has "to repair the configuration, follow steps for repairing dpm from DPM setup help ID: 3001
I tried the solution outlined here:
http://social.technet.microsoft.com/Forums/en-US/8be919ee-f358-47a4-9cc3-d23eb05d3f18/system-center-2012-r2-dpm-smtp-issue-reporting-services-server-cannot-connect-to-the-dpm?forum=dataprotectionmanager
and also the graphical depiction here: http://www.ms4u.info/2014/01/reporting-services-server-cannot.html
I tried these steps, but everytime i try to change it, it tells me:
"The permissions granted to user 'domain\userid' are insufficient for performing this action rsaccessdenied..
Nothing seems to work..
I thought if i went into sql management studio and made sure my userid had admin rights to the db it would work.. but i cant change it there (via integrated security).. i believe i need to login as SA, but i dont recall the password for SA, though it appears
i can change the SA password from within sql management studio.. i'm unsure if doing so will break DPM though or is even needed to fix the reporting integration issue..
Any thoughts on this?
Thanks
Tech, the Universe, Everything: http://tech-stew.com

Using:
data source="servername\MSDPM2012";persist security info=False;initial catalog=DPMDB
I used the domain sqlservice account and test connection was ok.
However.. accessing reports still crashes in the MMC
Tech, the Universe, Everything: http://tech-stew.com
When i recreated the db.. i called it Reporting2 or similiar..
Then the reports folder i created called "Reports Folder"
Then datasource name "reports datasource"
The issue here is that the DPM reports in the reporting web interface are gone, since this is a new DB.. how do i redeploy them
Tech, the Universe, Everything: http://tech-stew.com
i went back into the sql reporting services area.. hit change db.. chose the original .. then back to the url.. went to the OLD reporting services folder and datasource.. added the connect string and now reporting area works.. so does scheduling..
Problem now solved
Tech, the Universe, Everything: http://tech-stew.com
Oops spoke too soon.. the first time i set it to do "status" as a schedule.. it seemed to work (clicked ok, no error).. went back and added an email notification..
Now i'm getting.. "an error occurred causing the reporting job to fail" "system files may be corrupt".
Seems to only occur if i try to add the email address portion
Tech, the Universe, Everything: http://tech-stew.com
rechecked the datasource.. i think there was an error in the connect string.. now everything seems to be working.. email notifications and all.
Tech, the Universe, Everything: http://tech-stew.com

Cannot connect to the Database

Similar Messages

Maybe you are looking for