Cannot connect to the provider. make sure it is running in the specified host/port Error(2)

Hi Everyone,
When i try to connect to a Essbase/Planning Server, i am getting below error while other users are able connect to Server without any issues.
My connection was fine till yesterday, i checked all updates of excel but no luck..
Could some one help me pls, thanks in advance!

Posted same error in Essbase forums, so i am closing this topic here now.

Similar Messages

  • Smartview Error: "Cannot Connect to Provider. Make Sure It Is Running in the Specified Host/Port (503)

    I am having an issue retrieving on a SmartView grid running 11.1.2.2.309.01 and SmartView 11.1.2.2.102.I have a grid with three attribute dimension and, at first it was long running and gave me a netretry netinterval error. I shared with my administrator and, they gave me the registry updates to increase my timeout for my default browser. Now, I try to retrieve the same sheet and after approximately five minutes, I get the message, "Smartview Error: "Cannot Connect to Provider. Make Sure It Is Running in the Specified Host/Port (503)". I am not sure what this means. I can retrieve on other grids with one attribute dimension or a regular retrieve but, for some reason, I notice when I retrieve on multiple attribute dimensions, I am having this issue. I had this tested with others and, they are experiencing the same result. Any thoughts. Thanks in advance         

    The timeout was updated to 7 minutes but, the timeout on the APS was never updated. What happened was there was a 7,000 member dimension where attributes where being used to build a retrieve. The attributes were what was causing the issue. Not to say you should not use attributes. Ultimately, an alternate hierarchy in the 7,000 member dimension will  help but, I used other members to get the results I need. I just never saw the error message before and, did not see it in oracle support.. Thanks.

  • Error: "Cannot connect to the provider. Make sure it is running in the specified host/port. Error (12031)"

    Hi,
    EPM version: EPM 11.1.2.1
    When we are using Zoom In Level as All Levels and tring to drill down for dimention of HFM application we are getting below error.
    Error: "Cannot connect to the provider. Make sure it is running in the specified host/port. Error (12031)"
    As we found some solution from comunity , we have performed below workaround but still we are getting same error.
    ·              We have done the changes in mod_wl_ohs.conf file of OHS  with (WLIOTimeoutSecs 3600 and WLIOSocketTimeoutSecs 3600)
    ·              And then restarted OHS and  APS service but still we found same error.
    Could anyone please suggest ,where can we trace its log from web server and the solution for this issue?
         Thanks,
             D.N. Rana

    Hi,
    We have already performed the changes for APS in OHS as mentioned in the solution and the path also same as under OHS.
    Intially we were getting error for "to increase netRetryCould and NetRetryInterval"  as a solution we have added below 3  registry DWORD keys under  path
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
    "KeepAliveTimeout"=dword:00180000                   (26 Minutes)
    "ReceiveTimeout"=dword:00dbba00                      (240 Minutes)
    "ServerInfoTimeout"=dword:00180000                  (26 Minutes)
    Above error resolved but then we received Error"12031"
    Now we have added above 3 DWORD keys under path HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
    and now we are not getting the  error "12031".
    But here we are not getting how it(LB issue) resolved with above solution?
    Thanks,
    D.N.Rana

  • [svn] 4706: When handling the damageEvent make sure _contents gets updated with the potentially modified contents of the textFlow .

    Revision: 4706
    Author: [email protected]
    Date: 2009-01-28 07:58:30 -0800 (Wed, 28 Jan 2009)
    Log Message:
    When handling the damageEvent make sure _contents gets updated with the potentially modified contents of the textFlow. Either the contents or the style of the text flow, or both could have triggered the damage event.
    QE Notes:
    Doc Notes:
    Bugs: SDK-18749
    Reviewers: Gordon
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-18749
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/TextGraphic.as

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • SmartView Error "Cannot Connect to the Provider. Make Sure It Is Running...

    Hi All
    Our user are getting below error when they try to connect from SmartView
    Cannot Connect to the Provider. Make Sure It Is Running in the Specified Host/Port.Error(12031).
    We are on 9.3.3 planning.our web server is WebSphere
    Please suggest
    Thanks,

    You might want to increase the timeout and check:
    Smartview in Excel utilizes some Microsoft settings that it obtains From IE. When running on IE 7 or higher there are new settings that have a low default time out. You can increase these by following the instructions in the articles listed below
    http://support.microsoft.com/kb/813827
    http://support.microsoft.com/kb/181050
    Make sure you have a safe backup of the windows registry before you do this .
    1. Open the Registry (Start -> Run -> Regedit)
    2. Locate the following section:
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\
    3. Create the following new keys for DWORD with Hexadecimal values:
    ReceiveTimeout and set it to 00dbba00
    KeepAliveTimeout and set it to 00180000
    ServerInfoTimeout and set it to 00180000
    4.Disconnect and close the Smartview and launch a fresh connection
    HTH-
    Jasmine.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Cannot connect to service provider. error (2)

    What I am facing right now, it always prompt me this error message
    "Cannot connect to the provider. Make sure it is running in the specified host/port. Error(2)."
    it is in version 9.3.1.2. this error i got when i try to connect any application through connection manager.
    kindly help me regarding this.

    If you are not the admin of the system then you will need to contact them to make sure APS is running, If you are the admin and APS is installed on windows then there will be a service named something like Hyperion Provider Services, you will need to start this service.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error message when accessing iTunes Store: "iTunes could not connect to the iTunes Store. The network connection timed out.   Make sure your network settings are correct and your network connection is active, then try again." Internet's fine! Please help!

    Everytime I try to access the itTunes Store, this is the message I receive:
    iTunes could not connect to the iTunes Store. The network connection timed out.
    Make sure your network settings are correct and your network connection is active, then try again.
    The internet connection is fine. I don't know how to fix this problem, and in the meantime I cannot connect at all to buy songs. Thanks for your help.

    I feel you pain i'm haveing the same problems here.
    iTunes could not connect to the iTunes Store. The
    network connection timed out.
    Make sure your network settings are correct and your network
    connection is active, then try again.
    does anyone plz have some insight for us.

  • Error: [NQSError:13037] cannot connect to BI security service,Please make sure this is running properly (with SSL or not) in EM

    Hi,
    Im unable to open the RPD online  getting following error.
    Note: Im not done any changes. Its works good till yesterday EOD.
    Error:
    [NQSError:13037] cannot connect to BI security service,Please make sure this is running properly (with SSL or not) in EM.
    [NQSError:37001] could not connect to the oracle BI server instance..
    Kindly help me to fix this issue.

    Hi,
    Could you access the answer side.
    Could you see the reports.
    Do one thing, take a back up of NQS config file from <Oracle Location>\instance\instance1\config\obiserver folder\nqsconfig.ini file.
    Copy nqs config file if you have already have a back up.
    Restart the services and try once.
    http://mkashu.blogspot.com
    Regards,
    VG

  • Cannot publish to MobileMe.   Error says, "iWeb couldn't connect to MobileMe. Make sure your Internet connection works and try again."  Connection is OK!

    My site will publish to a folder, but will not publish to MobileMe.   Error says, “iWeb couldn’t connect to MobileMe. Make sure your Internet connection works and try again.“  Connection is OK!

    Thank you Alancito for your reply.  The recent post you suggested was not necessary because another of your suggestions did the trick:  https://discussions.apple.com/message/11503337#11503337  In effect, it seems to have reestablished my connection to my MobileMe account, and my iWeb site now publishes on MobileMe. 
    My next step will be to transfer my iWeb site to another Personal Web Provider when MobileMe ceases to exist next June.  Any recommendations for a simple PWP?
    Thank you very much,
    William Oglesby

  • Error:Cannot connect to WMI provider. You do not have permission or the server is unreachable

    I'm getting the below message when i try and access SQL Config Manager on my Windows Server 2003 R2
    "Cannot connect to WMI provider. You do not have permission or the server is unreachable. Note that you can only manage SQL Server 2005 and later servers with SQL Server Configuration Manager.
    Generic failure [0x80041001]"
    Also tries with the below solution but still the error persists
    The solution is to go to a command prompt as administrator and then run mofcomp.
    C:\Program Files\Microsoft SQL Server\90\Shared>mofcomp "C:\Program Files\Microsoft SQL Server\90\Shared\sqlmgmproviderxpsp2up.mof"
    Below was the output of the command:
    Microsoft (R) 32-bit MOF Compiler Version 5.2.3790.1830
    Copyright (c) Microsoft Corp. 1997-2001. All rights reserved.
    Parsing MOF file: C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmp
    roviderxpsp2up.mof
     (1): error SYNTAX 0X8004402f: Error creating temporary file
    Compiler returned error 0x8004402f
    C:\Program Files (x86)\Microsoft SQL Server\100\Shared>
    Can anyone tell how this problem can be solved?

    Sorry for the mistake.The command prompt is
    C:\Program Files (x86)\Microsoft SQL Server\100\Shared>mofcomp "C:\Program Files  (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
    And error i got is
    Microsoft (R) 32-bit MOF Compiler Version 5.2.3790.1830
    Copyright (c) Microsoft Corp. 1997-2001. All rights reserved.
    Parsing MOF file: C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmp
    roviderxpsp2up.mof
     (1): error SYNTAX 0X8004402f: Error creating temporary file
    Compiler returned error 0x8004402f
    C:\Program Files (x86)\Microsoft SQL Server\100\Shared>
    I hav checked that sqlmgmproviderxpsp2up.mof is in C:\Program Files  (x86)\Microsoft SQL Server\100\Shared\ folder.

  • Error message we could not complete your itunes store request. The network connection was reset. Make sure your network connection is active

    Can Anyone help with this message which occurs when I am trying to update my iMatch, it says "gathering information about your library" & then after a few mins when the progress band gets almost to the end, I get the message "we could not complete your itunes store request. The network connection was reset. Make sure your network connection is active & try again"
    Support has told me that its a problem with my connection, but I disagree, how come I can download countless songs from iTunes without ever getting this message, I think they are bullsh***g me to get rid of me.
    I have even followed their advice & totally disabled all my antivirus, adwatch & firewall software & it still does it.
    Can anyone help with this

    Hi mate, well I really dont know why but last night it started to work out of the blue, you might want to check yours again as they may have fixed a bug??
    I did absoultely nothing different yesterday to make it start working, I had previously disabled all my antivirus, firewall, anti tracker etc etc & it didnt sort it.
    The only thing that happened yesterday was my laptop went dead flat & I had to a reboot (dont choose System Resume, which I normally do) I chose the other option in error & had to wait nearly an hour whilst my PC "repaired files etc" & it also downloaded a load of updates (had that message "dont power off, as updates are in progress")
    I really dont know if that sorted the issue or Apple fixed the bug yesterday but its working.
    Good luck

  • HT1768 itunes could not connect to itunes store.  The network connection timed out.  Make sure your network settings are correct and your network connection is active, then try again.

    I keep getting this error message when I try to log into Itunes, has anyone else seen this error?  If so how did you fix it?
    Itunes could not connect to itunes store.  The network connection timed out.  Make sure your network settings are correct and your network connection is active, and try again. 

    Have you disabled any firewall and security/antivirus programs?  This seems to have helped the vast majority of people who have posted the same problem in this forum.

  • When i try to open my itues it says "iTunes could not connect to the iTunes store. The Network connection timed out. Make sure your network settings are correct and your network connection is active, and try again"

    when i try to open my itues it says "iTunes could not connect to the iTunes store. The Network connection timed out. Make sure your network settings are correct and your network connection is active, and try again"

    I am having similar issues except that the store starts to load, then stops, then I only get iTunes Store in gray letters on a white screen. I can access playlist and the other stuff. Like flamesgirl, I contacted them and they just keep sending me links of stuff to try which I had already seen on the Apple website and nothing works. I posted the question on another forum I belong to and one responder said her husband was in an Apple store and asked about this problem as he was having the same issue. They said an update would be coming out soon as they were aware of the problem. Who knows.

  • When updating to iOS 5.0.1. get the err -3259, thus unable to install new iOS. The message I receive goes: "THE NETWORK CONNECTION TIMED OUT.  MAKE SURE YOUR NETWORK SETTINGS ARE CORRECT AND YOUR NETWORK CONNECTION IS ACTIVE, OR TRY AGAIN LATER."

    When updating to iOS 5.0.1. get the err -3259, thus unable to install new iOS. The message I receive goes: "THE NETWORK CONNECTION TIMED OUT.  MAKE SURE YOUR NETWORK SETTINGS ARE CORRECT AND YOUR NETWORK CONNECTION IS ACTIVE, OR TRY AGAIN LATER."
    Does anyone know how to solve this tiresome problem, please!?? The update is downloaded upto 723.5MB, and is required upto 723,6MB, then the error message pops out! Tnx.

    I have a quick wifi connection (Mac shows it as about 35 megabits) but I couldn't get the 5.0.1 OTA to work, I had to do it via cable to my computer's iTunes - and as I was already on iOS 5 it was only a small download, basically the same size as the OTA size.
    As the original poster is talking about a 730 meg download then I assume that they are still on iOS 4.3.5 or below and can therefore only download via their computer's iTunes - you need to be on iOS 5+ before you get the OTA option.

  • TS3694 I am trying to update my iPodtouch & keep getting this error message:  There was a problem downloading the software for the iPod.  The network connection timed out.  Make sure your network settings are correct and your network connection is active.

    I am trying to update my iPod touch & keep getting this error message:  There was a problem downloading the software for the iPod.  The network connection timed out.  Make sure your network settings are correct and your network connection is active.  Help!

    Temporarily disable or turn off your Firewall and Anti-Virus software and try the download again.

Maybe you are looking for