Cannot connect to the PSN? MTU settings changed

Good morning, I've been having an issue with the console over the past 2 days, where I am not able to connect to the PSN. It occured yesterday morning without any signs or for any reason. I didn't have a power outage, network connections were not interrupted. I signed off yesterday morning for a few hours, I then went to re-connect and couldn't.
I have read online that changing the MTU settings helps, and I had a little joy last night for a few hours where I was able to connect with MTU codes 1472 and 1473, however this morning I'm back to not being able to connect. I have tried unplugging and resetting all consoles and network devices, and I have reset my network settings back to factory, but I have had no luck. SONY are saying the servers are fine, but I am connected to the internet fine on my console and can browse, and use apps like Netflix and the BBC iPlayer. A various number of my friends and family are having the same problems nationwide so I doubt very much whether it is not something on SONY's end. Any information regarding this matter, tips and tricks or if anyone is having the same issue, please reply. Would be good to get some idea of what people are doing to solve this, if anything. Thanks for reading,Sam

Since you changed the password on the router, you have to input the new password in the printer. 
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

  • Since i updated v 8 my iphone cannot connect to the internet via settings or other apps

    since i updated v 8 on my phone i cannot connect to the internet through settings or any other app. Text works intermittently

    Greetings emondro, 
    Thank you for participating in the Apple Support Communities. 
    It sounds like you're not able to connect to Wi-Fi or cellular data on your iPhone. You may find the troubleshooting steps in these articles helpful with troubleshooting the connectivity issues you're seeing:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    iPhone cellular data connection issues - Apple Support
    All the best,
    Jeremy 

  • I cannot connect to the internet after switching providers.  I've changed the email address associated with the new account but am sure there is something else I need to change.  Can anyone help me?

    I cannot connect to the internet after switching providers.  I've changed the email address associated with the new account but am sure there is something else I need to change.   I have also changed the apple information as well including user name and password.  Can anyone help me?  (This is an ipad question).

    Apple ID: Changing your Apple ID
    http://support.apple.com/kb/ht5621
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    iOS: Changing the signed-in iTunes Store Apple ID Account
    http://support.apple.com/kb/ht1311
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings"  I am on a secure networ

    My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings"  I am on a secure networkl.

    Can't connect to the iTunes Store
    Make sure that time zone is correct in addition to date and time

  • I have 2 Apple TV's in my home. When I attempt to login, is say cannot connect to the internet.  I have reset both Apple TV's and also restarted them both.but still cannot connect to the internet.  I al reset my router and still not change

    I have 2 Apple TV's in my home.  One is 2nd Generation and the other is 3rd Generation.  One one that is 2nd Gen cannot connect to the internet.  First I restarted, the I rest it and I even changed the password. still no connection.  So I purchased the 3rd Gen TV and I have to same problem, but they are in different rooms.  Before I had no problem with my 2nd Gen TV, but then one day it did not connect.  I even had my internet provider come and check my internet and it worked ok, but no connection with the Apple TV.  I have tried everything but no results.  Somebody please help me.
    Regards,
    Richard

    Hi richardwilliams51,
    If you are having difficulty connecting to the Internet using your Apple TV, I would suggest troubleshooting using the steps in this article -
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS4546
    If that does not completely fix your Apple TV, you may need to restore it, using this article -
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/kb/HT4367
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • I cannot connect to the internet. I think I have my settings all out of whack now and need to get them back to the way they were when it was working. (I know my wireless router is working because my Dell has no problem connecting to the internet.)

    I cannot connect to the internet on my iMac through my wireless router. I think I screwed up the settings and need to reset them. I know the router is working because I can access the internet on my Dell laptop which is located right next to my Mac.

    On your iMac try the following, in order, until (hopefully) resolved:
    1a. Delete Preferred Network(s)
    System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
    Under "Preferred Networks," delete the network(s) you regularly use from the list.
    1b. Delete AirPort Keychain Entries
    Launch the "Keychain Access" application located in Applications/Utilties.
    In the windows on the left side: Select login for Keychains and "All Items" for Category.
    Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
    1c. Add Preferred Network(s)
    System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
    Add the preferred network(s) using the "+" button.
    Restart or log out then back in.
    2. Move System Configuration Files
    (Note: You will have to reestablish your network connections settings.)
    Go to /Library/Preferences
    Move the SystemConfiguration folder to the desktop.
    Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

  • Why am i getting the message cannot get mail or that i am not connected to the internet what settings do i need to be on

    why am i getting the message cannot get mail or that i am not connected to the internet what settings do i need to be on

    WIFi needs to enabled and you need to be connected to a network. Alternatively, you need Cellular Data to be "on". (Settings>General>Network). But it propably is a problem with your router (at least, it often is with me), provided you are using your private router. Try schutting it off and turning it on again. This usually sorts problems like this out.

  • I am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet.  Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

    i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet.  Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I get a message that my ipad and iphone cannot connect to the iTunes store. I have tried to sync books to my iPad and iphone and i get the message that I cannot connect to the iTunes store and thus cannot sync a book to my books app. Why?

    I get a message that my ipad 2 and iphone 5 cannot connect to the itunes store when I try to sync a book to my book app. Although, when I click "store" both are able to access the itunes store. Why is this? Also I tried to open a book that was synced and a message that I did not have enough memory to load this book popped up--when I know that I have well over 40gb of memory left in my ipad and over 16gb left in my iphone. The message that I cannot connect to the itunes store is strange that it offers no option and I have to hit OK to get out and use my ipad or iphone.

    Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.
    If that doesn't solve it then what has worked for some people is going into Settings > General > Date & Time and changing the date to a few months (or maybe a year or two) in the future and then re-trying

  • Cannot Connect to the iBooks Store

    When I open the iBooks store in Mavericks I get "Cannot Connect to the iBooks Store". Also, in Safari anything it cannot connect to anything that uses HTTPS (secure/encrypted connection) such as Twitter. However I do not know if that persisted from Mountain Lion, as I use Firefox. It is solely with my computer, the other mac on Mavericks connects just fine. However, here's where it gets strange. My iPhone, which I have my keychain synced to, does not have a problem. Additionally, the iTunes Store on iTunes can connect to the books section. I've tried going through my certificates and resetting them to Use System Default, using First Aid, changing my MTU in Network Preferences to 1300, and fixing disk permissions, but none of that worked. I have no proxies and no DNS servers.
    I'm getting this error in this console whenever I open iBooks: NSURLConnection/CFURLConnection HTTP load failed (kCFStreamErrorDomainSSL, -9813).

    I have exactly the same issue as describet by "bengersfoo", i.e.
    "I can find exactly the certificate that pavelfrompraha mentions, and it is set to "Always Trust".
    But I cannot reem to reset it to System Defaults. When I choose that option it has always reverted to "Always Trust" whenever I check again."
    It would be very helpful if someone could please explain how to make the "System Defaults" setting stick.

  • Error: "Cannot connect to the provider. Make sure it is running in the specified host/port. Error (12031)"

    Hi,
    EPM version: EPM 11.1.2.1
    When we are using Zoom In Level as All Levels and tring to drill down for dimention of HFM application we are getting below error.
    Error: "Cannot connect to the provider. Make sure it is running in the specified host/port. Error (12031)"
    As we found some solution from comunity , we have performed below workaround but still we are getting same error.
    ·              We have done the changes in mod_wl_ohs.conf file of OHS  with (WLIOTimeoutSecs 3600 and WLIOSocketTimeoutSecs 3600)
    ·              And then restarted OHS and  APS service but still we found same error.
    Could anyone please suggest ,where can we trace its log from web server and the solution for this issue?
         Thanks,
             D.N. Rana

    Hi,
    We have already performed the changes for APS in OHS as mentioned in the solution and the path also same as under OHS.
    Intially we were getting error for "to increase netRetryCould and NetRetryInterval"  as a solution we have added below 3  registry DWORD keys under  path
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
    "KeepAliveTimeout"=dword:00180000                   (26 Minutes)
    "ReceiveTimeout"=dword:00dbba00                      (240 Minutes)
    "ServerInfoTimeout"=dword:00180000                  (26 Minutes)
    Above error resolved but then we received Error"12031"
    Now we have added above 3 DWORD keys under path HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
    and now we are not getting the  error "12031".
    But here we are not getting how it(LB issue) resolved with above solution?
    Thanks,
    D.N.Rana

  • TS1702 I can't update my applications. Always appeared cannot connect to the iTunes store

    I can't update my applications. Always appeared cannot connect to the iTunes store

    I had the same issue all i had to do was go into settings > general > cellular > itunes > ON  then go back to the first settings > iTunes & App Stores > Use Cellular Data > ON
    i had 5 days of trying to fix this with no help from apple, i also dont have wifi at home, but found if i went out could use wifi to access itunes, so went home and played with my phone and YAY FINALLY FIXED!
    Hope this helps everyone and maybe apple will let everyone know that after the update some phones automaticly switch cellular use off, i tried everything from changing the date forward to factory restoring my phone none of which fixed it
    GOODLUCK!

  • No trusted certificate found (91);Cannot connect to the LDAP server

    HI All,
    I am trying to connect to LDAP server with the following code.
    JSSESocketFactory fact = null;
    private LDAPConnection conn = null;
    String keystore = "C:\\j2sdk1.4.2_15\\jre\\lib\\security\\cacerts";
    System.setProperty("javax.net.ssl.trustStore",keystore);
    fact = new JSSESocketFactory(null);
    conn = new LDAPConnection(fact);
    int ldapVersion = 3;//LDAPConnection.LDAP_V3; //defualt values of LDAP settings
    private int ldapPort = 636;
    LDAPAttributeSet ldapAtrbSet;
    String ldapHost;
    String loginDN;
    String loginDN_Password;
    And it is gicving me error :
    Error: netscape.ldap.LDAPException: SSL connection to 192.168.10.8:636, sun.security.validator.ValidatorException: No trusted certificate found (91); Cannot connect to the LDAP server
    netscape.ldap.LDAPException: SSL connection to 192.168.10.8:636, sun.security.validator.ValidatorException: No trusted certificate found (91); Cannot connect to the LDAP server
         at netscape.ldap.factory.JSSESocketFactory.makeSocket(JSSESocketFactory.java:105)
         at netscape.ldap.LDAPConnSetupMgr.connectServer(LDAPConnSetupMgr.java:418)
         at netscape.ldap.LDAPConnSetupMgr.openSerial(LDAPConnSetupMgr.java:350)
         at netscape.ldap.LDAPConnSetupMgr.connect(LDAPConnSetupMgr.java:244)
         at netscape.ldap.LDAPConnSetupMgr.openConnection(LDAPConnSetupMgr.java:170)
         at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1042)
         at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:924)
         at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:768)
         at com.reflexis.LDAP.LdapTestSSL.createConnection(LdapTestSSL.java:522)
         at com.reflexis.LDAP.LdapTestSSL.checkLdap(LdapTestSSL.java:118)
         at com.reflexis.LDAP.LdapTestSSL.main(LdapTestSSL.java:52)
    Unable to connect to LDAP server
    I have imported atr certificate also by using command:
    "keytool -import -alias jag -file c:\x225.cer -keystore c:\j
    2sdk1.4.2_15\jre\lib\security\cacerts"
    I am running my java code from eclipse. And do i have to set any thing in eclipse for certificate. I Have imported certificate from command prompt.
    Can any one please help me.It is very important for me.
    Please its very urgent.
    THanks,
    Ankush Patni

    As previously said network is a possible cause.Other things could be time on filer is too far off time on DC.AD object for filer has been deleted or change by a Windows admin.If all users are experiencing a problem, you may need to rebind it to AD - run CIFS setup at command prompt

  • Applicaton Catalog - "Cannot connect to the application server" - Existing solutions have not worked

    Hi there,
    I have researched the problem below extensively online and found quite a varies array of solutions offered however they all seem to relate to the problem in that someone was setting up SCCM but couldn't get it to work. My situation is different in that the
    feature was working, no settings were changed however it has now stopped working.
    The issue is that if any user attempts to use the app catalog, they are shown the error screen which says "Cannot connect to the application server". It then says the problem might be temporary, try again later etc however it's not temporary.
    All the settings for the app catalog appear to be correct, as I would expect them to be as it was working (I am new to this company, the Desktop manager has told me it was working a few weeks ago).
    Does anyone know of a service in Windows, maybe something to do with the SQL side or certificates that could cause this issue? (although I checked certificates and again, looks fine). I'm almost at the point now of just restarting the server because
    if all else fails, turn it off and on again right?
    Cheers all.

    Hi, I just typed a long reply to this and then accidentally clicked a favourite on the Favourites bar and lost everything I typed :(
    -Checked the path in IIS to the \SMS_CCM\CMApplicationCatalog folder was OK and it was.
    -Checked that required .NET components including WCF are installed.
    -This one seemed a bit strange but ensured local service account has access to C:\Windows\Temp (this seemed very basic and unlikely but I tried it anyway due to desperation).
    -Checked that self-signed certificate was trusted by my PC attempting to access the App Catalog.
    -Checked SCCM services on the server are all running (where they should be, or set to manual as appropriate).
    I'm sure I've tried more than this, but these are the main things I can remember.
    Cheers.

  • Networking - No Internet - Cannot Connect to the Server

    I have an old Intel Mac Mini running Leopard (10.5.8, I think) and connected to a wifi network created by a Time Capsule connected to a DSL router.  I use the Mini (connected to a widescreen TV) mostly as a media center for Hulu, Netflix, iTunes, and iPhoto.  The wifi network works fine for my laptop and iPhone, etc., but for some time now neither Safari nor Software Update has been able to access the internet from the Mac Mini.  Instead I get a message that 'Safari cannot connect to [the URL] because Safari cannot connect to the server', and a recommendation to check my internet connection and try again.  But I appear to be connected to my wifi network, Network Diagnostics says my internet connection appears to be working normally, and--most important--iTunes DOES connect to the internet to download podcasts etc. without any problems.  I went to Network Preferences > Security > Firewall and found that iTunes was set to allow connections while Safari was set to block them--but authorizing Safari to allow connections didn't fix the problem even after a restart.  (Also, because Software Update doesn't show up in Applications or Utilities, there doesn't seem to be any way to select Software Update under the firewall, which is understandable but also suggests that the problem is elsewhere.)   So I turned the firewall off entirely and restarted but that didn't help either.  Does anyone have any idea what to do?  Thanks.

    Camelot-
    Thanks.  I see it but I don't know what it means:  The pane is set to configure proxies manually (the only other option is to configure using a PAD file).  There nothing checked under 'Select a protocol to configure' and nothing entered in the 'FTP Proxy Server' box.  In the 'Bypass proxy settings for these Hosts and Domains' box there are two entries (separated by commas) for '*.local' and 'nnn.nnn/nn' (with the n's representing numbers).  The 'Use Passive FTP Mode (PASV)' checkbox is checked.  Does anything here sound problematic, or is there anything else I can check?  Also, FYI, iTunes stopped connecting too after I had started downloading small podcasts individually to check the connection after making various changes to the firewall (but restoring the firewall back where it was didn't get iTunes back).  Thanks very much.
    -Jim

Maybe you are looking for

  • Newbie questions regarding HD editing

    I've used Premiere Pro since the 1.5 days, but now I have CS 4 (4.1) and I want to edit HD video. I have a Sony HDR-SR12 camcorder that I have set to record using AVC HD 16M (FH) with X.V. Color. My questions are: 1) Is there a preset for CS4 that wi

  • Err in J1IEX

    D/ F, Weu2019re capturing RG23 C goods as Non Cenvatable. While Posting Exc. Inv. thru J1IEX, sys is giving err: u201CFI/CO interface: Inconsistent FI/CO line item data for updating. Message no. RW016u201D. How to solve this? Pls advice. Thank you.

  • Variant creation

    Hi, We have a variant for a SE38 program, which is being used by a batch job to execute the program in the background. We would like to change the variant directly in production, but find in the attributes that the variant is protected. My questions

  • HT3529 Links removed from messages to iPhone

    I dragged and dropped a URL from Safari (MAC) to Messages (MAC) and sent it to a friend (iPhone). My Messages(MAC) showed the link, and I could click on the link and the website would pop-up in Safari.  (as expected). However, my friend's iPhone did

  • Help register ipod

    Have put in info and the correct serial number ipod still not register.My e mail name has 40 characters Could that be the problem?