Cannot connect to the secure network but can to the guest network
I have three computers in my home, all Apple. One is an iMac with 10.5 installed, another is a powerbook g4 17" with 10.5 installed and the third is an old titanium powerbook g4 15" with 10.4 installed. All of them have the newest versions of software.
I just bought a new time capsule and that has the newest firmware upgrade installed. I set the time capsule up with a secure WPA Personal network and a guest network with no password. I can connect to the secure network on the iMac and the 17" powerbook but the titanium powerbook cannot even see the secure network or connect to it if I enter it and put in the correct password. However the titanium powerbook can see and connect to the guest network.
Please help, I need to be able to print from the titanium powerbook to an ethernet printer connected to the time capsule.
I've tried adding a wireless client with no password in airport utility thinking I could connect the titanium powerbook that way and that does not work either.
Actually I have figured it out. I guess the titanium powerbooks cannot do WPA encryption, only WEP but I cannot choose WEP in the airport utility nor do I want to. I did find a work around though.
In airport utility I went to the base station menu and clicked on "equivalent network password" and it shows the WPA password and then something called "WPA Pre-Shared Key". The key is a 64 character password but I tried it on the titanium powerbook and it worked!
Similar Messages
-
i forgot the apple id and email password also the answer to the security question but i have the Serial, part number and imei
Apple ID security issues -
Account security issues almost always require you to speak directly to an Apple representative to securely establish your identity as the account holder. You can set it up so that Apple calls you, either immediately or at a time convenient to you.
1. Go to www.apple.com/support
2. Choose Contact Support and click Contact Us
3. Choose Other Apple ID Topics and choose the appropriate topic for your issue
4. Follow the onscreen instructions -
My thuderbolt display is 3 weeks old which I'm using as display for my mac mini. I no longer get the display on but can hear the sound. Please suggest.
Make sure the mini-displayport/TB plug is fully seated. It may look fully plugged in but isn't.
Make sure the Displays system preferences has an Arrangement tab. No Arrangement means the monitor is not being detected.
Do a smc reset.
If none of this works I suggest you take it back to apple (along with your mini). -
hi
i need help please . when i want to buy app from store ask me the security question
but i forgot the answer
so i need to the link to rest answer of security questionThe Best Alternatives for Security Questions and Rescue Mail
a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
b. Call Apple Support in your country: Customer Service: Contact Apple support.
c. Rescue email address and how to reset Apple ID security questions. -
My ISP has just installed a new modem with an ethernet connection, which I have plugged into my Airport Express. I'm able to connect to an open network in the neighborhood but not to my own network that I had set up before. I have done some troubleshooting, the modem is working when connected to my computer. It may just be the password, it's not accepting the password that I thought I had used to set up the Airport Express when I first bought it. Should I be using the same password as in my Accounts on my Mac's System Preferences?
... Would the network password be the same as my Mac's password?
It can be if you configured it that way, but since that is apparently not working for you it's probably not the same. You can reconfigure the Express easily enough using AirPort Utility - it is in your Utilities folder, which is found within your Applications folder.
Launch AirPort utility, then reset the Express:
To reset your Express:
Press and hold the reset button with a pen or pencil for 1 full second. The light (LED) will flash amber, indicating that the AirPort Express is in soft reset mode.
This will enable you to use AirPort Utility to reset your network password.
Note: If you do not make your changes within five minutes of pressing the reset button, AirPort Express will return to its previous configuration. The light will change back to solid green (or whatever state it was in before the reset).
Resetting an AirPort Base Station or Time Capsule FAQ -
I want to change the security answers on my account but have noticed that the email address I listed is a hotmail one which I cannot get into. How do I change this as I only see an edit button for logging into iTunes but not one where I can change in the security answers. Thankyou
You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(94157) -
HT1414 I cannot access the internet on my home network but can on any other network
My iPad is able to access the internet on all other networks but my new home network doesn't allow me to get on.
I do not think so. It seems that this has happened to some people that use comcast. I am wondering if anyone has figured out a way to override the issue.
-
Cannot connect to Session broker server, but can to other servers in Cluster
Hi Everyone,
Hopefully this is the right place to post. Have searched quite a bit through the forums (not all 19000+ pages though), and can't seem to find a similiar issue.
I have also searched the internet and tried all solutions others with a similiar problem have.
This is my problem:
We have two servers running Server 2008 R2, set up as Remote Desktop Servers in a cluster setup.
The session broker is located on the second server (This is an active server which has sessions load balanced to it). There is also a DNS round robin setup
Problem: When sessions are allowed to be load balanced on Server2, then the users cannot connect to the cluster. The round robin seems to still send some sessions to the first server, and these seem to connect fine.
I suspected the issue was with the WMI Respository, and so started. I found a lot of errors, but have been unable to fix them.
I downlaoded the WMIDiag from Microsoft, and here is the report:
48866 15:56:44 (0) ** WMIDiag v2.1 started on 15 April 2015 at 15:48.
48867 15:56:44 (0) **
48868 15:56:44 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
48869 15:56:44 (0) **
48870 15:56:44 (0) ** This script is not supported under any Microsoft standard support program or service.
48871 15:56:44 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
48872 15:56:44 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
48873 15:56:44 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
48874 15:56:44 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
48875 15:56:44 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
48876 15:56:44 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
48877 15:56:44 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
48878 15:56:44 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
48879 15:56:44 (0) ** of the possibility of such damages.
48880 15:56:44 (0) **
48881 15:56:44 (0) **
48882 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48883 15:56:44 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
48884 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48885 15:56:44 (0) **
48886 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48887 15:56:44 (0) ** Windows Server 2008 R2 - Service pack 1 - 64-bit (7601) - User 'MIBCO\CONN.LOMBARD' on computer 'SSCRDS02'.
48888 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48889 15:56:44 (0) ** INFO: Environment: .................................................................................................. 1 ITEM(S)!
48890 15:56:44 (0) ** INFO: => 3 possible incorrect shutdown(s) detected on:
48891 15:56:44 (0) ** - Shutdown on 05 December 2014 22:55:28 (GMT-0).
48892 15:56:44 (0) ** - Shutdown on 12 December 2014 06:43:00 (GMT-0).
48893 15:56:44 (0) ** - Shutdown on 27 February 2015 05:19:26 (GMT-0).
48894 15:56:44 (0) **
48895 15:56:44 (0) ** System drive: ....................................................................................................... C: (Disk #0 Partition #1).
48896 15:56:44 (0) ** Drive type: ......................................................................................................... SCSI (DELL PERC H700 SCSI Disk Device).
48897 15:56:44 (0) ** There are no missing WMI system files: .............................................................................. OK.
48898 15:56:44 (0) ** There are no missing WMI repository files: .......................................................................... OK.
48899 15:56:44 (0) ** WMI repository state: ............................................................................................... CONSISTENT.
48900 15:56:44 (0) ** AFTER running WMIDiag:
48901 15:56:44 (0) ** The WMI repository has a size of: ................................................................................... 26 MB.
48902 15:56:44 (0) ** - Disk free space on 'C:': .......................................................................................... 297281 MB.
48903 15:56:44 (0) ** - INDEX.BTR, 5513216 bytes, 2015/04/15 03:52:21 PM
48904 15:56:44 (0) ** - MAPPING1.MAP, 76804 bytes, 2015/04/15 03:50:51 PM
48905 15:56:44 (0) ** - MAPPING2.MAP, 76804 bytes, 2015/04/15 03:52:21 PM
48906 15:56:44 (0) ** - OBJECTS.DATA, 22036480 bytes, 2015/04/15 03:52:21 PM
48907 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48908 15:56:44 (0) ** INFO: Windows Firewall status: ...................................................................................... ENABLED.
48909 15:56:44 (0) ** Windows Firewall Profile: ........................................................................................... DOMAIN.
48910 15:56:44 (0) ** Inbound connections that do not match a rule BLOCKED: ............................................................... ENABLED.
48911 15:56:44 (0) ** => This will prevent any WMI remote connectivity to this computer except
48912 15:56:44 (0) ** if the following three inbound rules are ENABLED and non-BLOCKING:
48913 15:56:44 (0) ** - 'Windows Management Instrumentation (DCOM-In)'
48914 15:56:44 (0) ** - 'Windows Management Instrumentation (WMI-In)'
48915 15:56:44 (0) ** - 'Windows Management Instrumentation (ASync-In)'
48916 15:56:44 (0) ** Verify the reported status for each of these three inbound rules below.
48917 15:56:44 (0) **
48918 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI)' GROUP rule: ............................................. ENABLED.
48919 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI-Out)' rule: ............................................... ENABLED.
48920 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI-In)' rule: ................................................ ENABLED.
48921 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (DCOM-In)' rule: ............................................... ENABLED.
48922 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (ASync-In)' rule: .............................................. ENABLED.
48923 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48924 15:56:44 (0) ** DCOM Status: ........................................................................................................ OK.
48925 15:56:44 (0) ** WMI registry setup: ................................................................................................. OK.
48926 15:56:44 (0) ** INFO: WMI service has dependents: ................................................................................... 2 SERVICE(S)!
48927 15:56:44 (0) ** - Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Disabled')
48928 15:56:44 (0) ** - SMS Agent Host (CCMEXEC, StartMode='Automatic')
48929 15:56:44 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
48930 15:56:44 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
48931 15:56:44 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
48932 15:56:44 (0) ** this can prevent the service/application to work as expected.
48933 15:56:44 (0) **
48934 15:56:44 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
48935 15:56:44 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
48936 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48937 15:56:44 (0) ** WMI service DCOM setup: ............................................................................................. OK.
48938 15:56:44 (0) ** WMI components DCOM registrations: .................................................................................. OK.
48939 15:56:44 (0) ** WMI ProgID registrations: ........................................................................................... OK.
48940 15:56:44 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
48941 15:56:44 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
48942 15:56:44 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
48943 15:56:44 (0) ** WMI providers EXE/DLL availability: ................................................................................. OK.
48944 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48945 15:56:44 (0) ** INFO: User Account Control (UAC): ................................................................................... ENABLED.
48946 15:56:44 (0) ** => WMI tasks requiring Administrative privileges on this computer MUST run in an elevated context.
48947 15:56:44 (0) ** i.e. You can start your scripts or WMIC commands from an elevated command
48948 15:56:44 (0) ** prompt by right clicking on the 'Command Prompt' icon in the Start Menu and
48949 15:56:44 (0) ** selecting 'Run as Administrator'.
48950 15:56:44 (0) ** i.e. You can also execute the WMI scripts or WMIC commands as a task
48951 15:56:44 (0) ** in the Task Scheduler within the right security context.
48952 15:56:44 (0) **
48953 15:56:44 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
48954 15:56:44 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
48955 15:56:44 (0) ** privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
48956 15:56:44 (0) ** to ensure that administrative privileges are granted. If a Local User account is used for remote
48957 15:56:44 (0) ** accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
48958 15:56:44 (0) **
48959 15:56:44 (0) ** DCOM security for 'Microsoft WBEM UnSecured Apartment' (Launch & Activation Permissions): ........................... MODIFIED.
48960 15:56:44 (1) !! ERROR: Actual trustee 'NT AUTHORITY\SYSTEM' DOES NOT match corresponding expected trustee rights (Actual->Default)
48961 15:56:44 (0) ** - ACTUAL ACE:
48962 15:56:44 (0) ** ACEType: &h0
48963 15:56:44 (0) ** ACCESS_ALLOWED_ACE_TYPE
48964 15:56:44 (0) ** ACEFlags: &h4
48965 15:56:44 (0) ** NO_PROPAGATE_INHERIT_ACE
48966 15:56:44 (0) ** ACEMask: &hB
48967 15:56:44 (0) ** DCOM_RIGHT_EXECUTE
48968 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
48969 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
48970 15:56:44 (0) ** - EXPECTED ACE:
48971 15:56:44 (0) ** ACEType: &h0
48972 15:56:44 (0) ** ACCESS_ALLOWED_ACE_TYPE
48973 15:56:44 (0) ** ACEFlags: &h0
48974 15:56:44 (0) ** ACEMask: &h1F
48975 15:56:44 (0) ** DCOM_RIGHT_EXECUTE
48976 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
48977 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
48978 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
48979 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
48980 15:56:44 (0) **
48981 15:56:44 (0) ** => The actual ACE has the right(s) '&h14 DCOM_RIGHT_LAUNCH_REMOTE DCOM_RIGHT_ACTIVATE_REMOTE' removed!
48982 15:56:44 (0) ** This will cause some operations to fail!
48983 15:56:44 (0) ** It is possible to fix this issue by editing the security descriptor and adding the removed right.
48984 15:56:44 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
48985 15:56:44 (0) **
48986 15:56:44 (0) ** DCOM security for 'Microsoft WBEM UnSecured Apartment' (Launch & Activation Permissions): ........................... MODIFIED.
48987 15:56:44 (1) !! ERROR: Actual trustee 'NT AUTHORITY\INTERACTIVE' DOES NOT match corresponding expected trustee rights (Actual->Default)
48988 15:56:44 (0) ** - ACTUAL ACE:
48989 15:56:44 (0) ** ACEType: &h0
48990 15:56:44 (0) ** ACCESS_ALLOWED_ACE_TYPE
48991 15:56:44 (0) ** ACEFlags: &h4
48992 15:56:44 (0) ** NO_PROPAGATE_INHERIT_ACE
48993 15:56:44 (0) ** ACEMask: &hB
48994 15:56:44 (0) ** DCOM_RIGHT_EXECUTE
48995 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
48996 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
48997 15:56:44 (0) ** - EXPECTED ACE:
48998 15:56:44 (0) ** ACEType: &h0
48999 15:56:44 (0) ** ACCESS_ALLOWED_ACE_TYPE
49000 15:56:44 (0) ** ACEFlags: &h0
49001 15:56:44 (0) ** ACEMask: &h1F
49002 15:56:44 (0) ** DCOM_RIGHT_EXECUTE
49003 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
49004 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
49005 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
49006 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
49007 15:56:44 (0) **
49008 15:56:44 (0) ** => The actual ACE has the right(s) '&h14 DCOM_RIGHT_LAUNCH_REMOTE DCOM_RIGHT_ACTIVATE_REMOTE' removed!
49009 15:56:44 (0) ** This will cause some operations to fail!
49010 15:56:44 (0) ** It is possible to fix this issue by editing the security descriptor and adding the removed right.
49011 15:56:44 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
49012 15:56:44 (0) **
49013 15:56:44 (0) **
49014 15:56:44 (0) ** DCOM security warning(s) detected: .................................................................................. 0.
49015 15:56:44 (0) ** DCOM security error(s) detected: .................................................................................... 2.
49016 15:56:44 (0) ** WMI security warning(s) detected: ................................................................................... 0.
49017 15:56:44 (0) ** WMI security error(s) detected: ..................................................................................... 0.
49018 15:56:44 (0) **
49019 15:56:44 (1) !! ERROR: Overall DCOM security status: ................................................................................ ERROR!
49020 15:56:44 (0) ** Overall WMI security status: ........................................................................................ OK.
49021 15:56:44 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
49022 15:56:44 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 5.
49023 15:56:44 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
49024 15:56:44 (0) ** 'select * from MSFT_SCMEventLogEvent'
49025 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
49026 15:56:44 (0) ** 'SELECT * FROM __NamespaceCreationEvent'
49027 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
49028 15:56:44 (0) ** 'SELECT * FROM __ClassOperationEvent WHERE TargetClass ISA "CCM_Policy_EmbeddedObject"'
49029 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
49030 15:56:44 (0) ** 'SELECT * FROM __ClassOperationEvent WHERE TargetClass ISA "CCM_Policy_Config"'
49031 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
49032 15:56:44 (0) ** 'SELECT * FROM __ClassOperationEvent WHERE TargetClass ISA "CCM_Policy"'
49033 15:56:44 (0) **
49034 15:56:44 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
49035 15:56:44 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 3 NAMESPACE(S)!
49036 15:56:44 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTTPM.
49037 15:56:44 (0) ** - ROOT/CIMV2/TERMINALSERVICES.
49038 15:56:44 (0) ** - ROOT/SERVICEMODEL.
49039 15:56:44 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
49040 15:56:44 (0) ** use an encrypted connection by specifying the PACKET PRIVACY authentication level.
49041 15:56:44 (0) ** (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
49042 15:56:44 (0) ** i.e. 'WMIC.EXE /NODE:"SSCRDS02" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
49043 15:56:44 (0) **
49044 15:56:44 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
49045 15:56:44 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
49046 15:56:44 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 34 ERROR(S)!
49047 15:56:44 (0) ** - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49048 15:56:44 (0) ** MOF Registration: ''
49049 15:56:44 (0) ** - Root/CIMV2, Win32_OsBaselineProvider, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49050 15:56:44 (0) ** MOF Registration: ''
49051 15:56:44 (0) ** - Root/CIMV2, Win32_OsBaseline, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49052 15:56:44 (0) ** MOF Registration: ''
49053 15:56:44 (0) ** - Root/CIMV2, Win32_DriverVXD, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49054 15:56:44 (0) ** MOF Registration: ''
49055 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49056 15:56:44 (0) ** MOF Registration: ''
49057 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49058 15:56:44 (0) ** MOF Registration: ''
49059 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49060 15:56:44 (0) ** MOF Registration: ''
49061 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49062 15:56:44 (0) ** MOF Registration: ''
49063 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49064 15:56:44 (0) ** MOF Registration: ''
49065 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49066 15:56:44 (0) ** MOF Registration: ''
49067 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49068 15:56:44 (0) ** MOF Registration: ''
49069 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49070 15:56:44 (0) ** MOF Registration: ''
49071 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49072 15:56:44 (0) ** MOF Registration: ''
49073 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49074 15:56:44 (0) ** MOF Registration: ''
49075 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_NETDataProviderforOracle_NETDataProviderforOracle, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49076 15:56:44 (0) ** MOF Registration: ''
49077 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_NETDataProviderforOracle_NETDataProviderforOracle, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49078 15:56:44 (0) ** MOF Registration: ''
49079 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49080 15:56:44 (0) ** MOF Registration: ''
49081 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49082 15:56:44 (0) ** MOF Registration: ''
49083 15:56:44 (0) ** - Root/WMI, ReserveDisjoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49084 15:56:44 (0) ** MOF Registration: ''
49085 15:56:44 (0) ** - Root/WMI, ReserveLateCount, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49086 15:56:44 (0) ** MOF Registration: ''
49087 15:56:44 (0) ** - Root/WMI, ReserveJoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49088 15:56:44 (0) ** MOF Registration: ''
49089 15:56:44 (0) ** - Root/WMI, ReserveDelete, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49090 15:56:44 (0) ** MOF Registration: ''
49091 15:56:44 (0) ** - Root/WMI, ReserveBandwidth, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49092 15:56:44 (0) ** MOF Registration: ''
49093 15:56:44 (0) ** - Root/WMI, ReserveCreate, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49094 15:56:44 (0) ** MOF Registration: ''
49095 15:56:44 (0) ** - Root/WMI, SystemConfig_PhyDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49096 15:56:44 (0) ** MOF Registration: ''
49097 15:56:44 (0) ** - Root/WMI, SystemConfig_Video, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49098 15:56:44 (0) ** MOF Registration: ''
49099 15:56:44 (0) ** - Root/WMI, SystemConfig_IDEChannel, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49100 15:56:44 (0) ** MOF Registration: ''
49101 15:56:44 (0) ** - Root/WMI, SystemConfig_NIC, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49102 15:56:44 (0) ** MOF Registration: ''
49103 15:56:44 (0) ** - Root/WMI, SystemConfig_Network, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49104 15:56:44 (0) ** MOF Registration: ''
49105 15:56:44 (0) ** - Root/WMI, SystemConfig_CPU, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49106 15:56:44 (0) ** MOF Registration: ''
49107 15:56:44 (0) ** - Root/WMI, SystemConfig_LogDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49108 15:56:44 (0) ** MOF Registration: ''
49109 15:56:44 (0) ** - Root/WMI, SystemConfig_Power, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49110 15:56:44 (0) ** MOF Registration: ''
49111 15:56:44 (0) ** - root/ccm/LocationServices, ClientInfo, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49112 15:56:44 (0) ** MOF Registration: ''
49113 15:56:44 (0) ** - root/ccm/LocationServices, ClientInfo, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49114 15:56:44 (0) ** MOF Registration: ''
49115 15:56:44 (0) ** => When a WMI performance class is missing (i.e. 'Win32_PerfRawData_TermService_TerminalServices'), it is generally due to
49116 15:56:44 (0) ** a lack of buffer refresh of the WMI class provider exposing the WMI performance counters.
49117 15:56:44 (0) ** You can refresh the WMI class provider buffer with the following command:
49118 15:56:44 (0) **
49119 15:56:44 (0) ** i.e. 'WINMGMT.EXE /SYNCPERF'
49120 15:56:44 (0) **
49121 15:56:44 (0) ** WMI MOF representations: ............................................................................................ OK.
49122 15:56:44 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
49123 15:56:44 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
49124 15:56:44 (0) ** WMI EXECQUERY operations: ........................................................................................... OK.
49125 15:56:44 (2) !! WARNING: WMI GET VALUE operation errors reported: ................................................................... 5 WARNING(S)!
49126 15:56:44 (0) ** - Root, Instance: __EventConsumerProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
49127 15:56:44 (0) ** - Root, Instance: __EventProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
49128 15:56:44 (0) ** - Root, Instance: __EventSinkCacheControl=@, Property: ClearAfter='00000000000015.000000:000' (Expected default='00000000000230.000000:000').
49129 15:56:44 (0) ** - Root, Instance: __ObjectProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
49130 15:56:44 (0) ** - Root, Instance: __PropertyProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
49131 15:56:44 (0) **
49132 15:56:44 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
49133 15:56:44 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
49134 15:56:44 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
49135 15:56:44 (0) ** WMI static instances retrieved: ..................................................................................... 6304.
49136 15:56:44 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
49137 15:56:44 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 3.
49138 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49139 15:56:44 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
49140 15:56:44 (0) ** DCOM: ............................................................................................................. 0.
49141 15:56:44 (0) ** WINMGMT: .......................................................................................................... 0.
49142 15:56:44 (0) ** WMIADAPTER: ....................................................................................................... 0.
49143 15:56:44 (0) **
49144 15:56:44 (0) ** # of additional Event Log events AFTER WMIDiag execution:
49145 15:56:44 (0) ** DCOM: ............................................................................................................. 0.
49146 15:56:44 (0) ** WINMGMT: .......................................................................................................... 0.
49147 15:56:44 (0) ** WMIADAPTER: ....................................................................................................... 0.
49148 15:56:44 (0) **
49149 15:56:44 (0) ** 34 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
49150 15:56:44 (0) ** => This error is typically a WMI error. This WMI error is due to:
49151 15:56:44 (0) ** - a missing WMI class definition or object.
49152 15:56:44 (0) ** (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
49153 15:56:44 (0) ** You can correct the missing class definitions by:
49154 15:56:44 (0) ** - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
49155 15:56:44 (0) ** Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
49156 15:56:44 (0) ** (This list can be built on a similar and working WMI Windows installation)
49157 15:56:44 (0) ** The following command line must be used:
49158 15:56:44 (0) ** i.e. 'WMIDiag CorrelateClassAndProvider'
49159 15:56:44 (0) ** Note: When a WMI performance class is missing, you can manually resynchronize performance counters
49160 15:56:44 (0) ** with WMI by starting the ADAP process.
49161 15:56:44 (0) ** - a WMI repository corruption.
49162 15:56:44 (0) ** In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
49163 15:56:44 (0) ** to validate the WMI repository operations.
49164 15:56:44 (0) ** Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
49165 15:56:44 (0) ** executing the WriteInRepository command. To write temporary data from the Root namespace, use:
49166 15:56:44 (0) ** i.e. 'WMIDiag WriteInRepository=Root'
49167 15:56:44 (0) ** - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
49168 15:56:44 (0) ** the WMI repository must be reconstructed.
49169 15:56:44 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
49170 15:56:44 (0) ** otherwise some applications may fail after the reconstruction.
49171 15:56:44 (0) ** This can be achieved with the following command:
49172 15:56:44 (0) ** i.e. 'WMIDiag ShowMOFErrors'
49173 15:56:44 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
49174 15:56:44 (0) ** ALL fixes previously mentioned.
49175 15:56:44 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
49176 15:56:44 (0) **
49177 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49178 15:56:44 (0) ** Unexpected, wrong or missing registry key values: ................................................................... 1 KEY(S)!
49179 15:56:44 (0) ** INFO: Unexpected registry key value:
49180 15:56:44 (0) ** - Current: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 0
49181 15:56:44 (0) ** - Expected: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 1
49182 15:56:44 (0) ** From the command line, the registry configuration can be corrected with the following command:
49183 15:56:44 (0) ** i.e. 'REG.EXE Add "HKLM\SOFTWARE\Microsoft\WBEM\CIMOM" /v "Logging" /t "REG_SZ" /d "1" /f'
49184 15:56:44 (0) **
49185 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49186 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49187 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49188 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49189 15:56:44 (0) **
49190 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49191 15:56:44 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
49192 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49193 15:56:44 (0) **
49194 15:56:44 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\USERS\CONN.LOMBARD\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2.SRV.SP1.64_SSCRDS02_2015.04.15_15.48.25.LOG' for details.
49195 15:56:44 (0) **
49196 15:56:44 (0) ** WMIDiag v2.1 ended on 15 April 2015 at 15:56 (W:110 E:41 S:1).
This seems to be the biggest problem:
48960 15:56:44 (1) !! ERROR: Actual trustee 'NT AUTHORITY\SYSTEM' DOES NOT match corresponding expected trustee rights (Actual->Default)
This seems to be the second biggest error (and there are a few of them):
0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
I have tried:
winmgmt /resyncperf
winmgmt /verifyrepository
winmgmt /salvagerepository
winmgmt /resetrepository
I have also tried registering the mof files with
MOFCOMP <FileName.mof>
Lastly, I even disabled the WMI service, renamed the Repository folder, and had it rebuild the repository.
I got stuck on re registering the 'NT AUTHORITY\SYSTEM' (I think it is in the Components section in Administrative tools), as I could not find clear instructions on exactly how to go about it.
Chkdsk found no errors
Sfc /scannow found no errors
winmgmt /verifyrepository finds no errors.
I'm hoping someone here might be able to steer me in the right direction to get this resolved, as I do not want to rebuild a server that hosts a connection broker and has over 100 user profiles on it, as well as some very annoying and finniky LOB apps installed,
which will have to manually be reinstalled for each profile.Hi,
Here is a blog regarding how to fix WMI issue might be useful to you:
Fixing WMI issues Using Batch Script
http://social.technet.microsoft.com/wiki/contents/articles/6887.fixing-wmi-issues-using-batch-script.aspx
In addition, you mentioned Remote Desktop Servers are in a cluster setup, would you tell us how did you create the cluster?
As far as I know, with RD Connection Broker, we don’t need to create a cluster but just add multiple RD session hosts into one collection, then RD connection Broker would redirect sessions automatically.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Cannot connect to RemoteApp (VDI mode) but can connect to full VDI desktop
Title says it all. I have a multiple server RDS farm. Gateway, license and broker are concentrated on one server. Several session hosts and they all work fine. They host full desktop sessions.
The problem started when we started to move to VDI (pooled managed). At first during testing everything was working in fine. We had started publishing our apps and it was working in our lab. We then tested for scale and deployment and everything was fine.
When we started to roll out, at some point during creating of the VDI vm's (we were testing with 5 and then deployed 50), it got interrupted and failed. We recreated all desktops and that finished OK.
Problem is: no one can connect to an app.
If I remove the published apps, everyone can get a VDI desktop, but as soon as I try to publish an app, then nothing. No errors generated... nothing. It looks like it is connecting but then nothing. The Remotepp window just silently closes.
I have:
1. Rebuilt then entire RD Host from bare metal
2. Removed and re-added the gateway and connection broker services on the main server
3. Rebuilt the template from scratch and republished
I get the exact same behavior. Users can get full managed VDI desktops... cannot get RemoteApps.
Unfortunately, I cannot destroy the entire RDS infrastructure and rebuild because it is a business critical part of our infrastructure.
I have combed through the registries looking for orphaned entries, etc. and nothing. I saw a few blog posts related to the local DB for the connection broker and have not tried digging into that. I DO NOT have connection broker running in HA.Hi Jason,
Thanks for your comment.
First of all sorry for late response.
There are many issue which can be caused by WMI to deny access to retrieve connection list. You can try few things which is quoted from below thread.
1. Check if the "TS Web Access Computers" security group on the RDSH server has incorrect permissions in DCOM and/or WMI:
For checking DCOM security settings:
1. Start the Component Services MMC snapin
2. Navigate to Component Services -> Computers -> My Computer
3. Right-click on My Computer and select properties
4. Go to the COM Security tab
5. Under Access Permissions, click the Edit Limits button
6. Ensure that TS Web Access Computers is in the list, with all of the permissions set to “allow”.
7. Under Launch and Activation Permissions, click the Edit Limits button
8. Ensure that TS Web Access Computers is in the list, with all of the permissions set to “allow”.
For checking WMI security settings:
1. Start the WMI Control MMC snapin
2. Right-click the WMI Control node and select properties
3. Go to the Security tab
4. Navigate to Root->CIMV2->TerminalServices
5. With TerminalServices selected, click the Security button
6. Ensure that TS Web Access Computers is in the list with Execute Methods, Enable Account, and Remote Enable set to "allow"
2. Verify the RD Session Host server's firewall allows WMI calls.
3. Verify that the RD Connection Broker hasn't lost its trust relationship with the domain.
4. See if non-RDS related WMI calls can be successfully made to the RDSH server. This can help differentiate between a general WMI issue and an issue calling the RDS WMI provider.
More information.
RemoteApp Source not working from RDWeb
http://social.technet.microsoft.com/Forums/windowsserver/en-US/173d4546-e12f-47c1-ac66-8b4f69826892/remoteapp-source-not-working-from-rdweb?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki -
Can Printer over network but can't scan over network with Officejet 6500 E710n
Got an odd problem... I can print all day via my wireless network, I can even ping my printer's IP with no issues.
I can't scan at all, it keeps giving me connection related error messages (Scanner Unreachable, etc). I checked the "Update IP Address" tool and the IP address was correct. So I figured I would install on a different computer.
I installed using the software from this website (I have never installed this HP printer on this computer, I always did eprinting from this computer), it worked perfectly, it found the printer almost instantly. Installation worked perfect with no issues, errors, etc.
Printed the test page perfectly but I still can't scan over the network, I tried both clicking on "HP Officejet 6500 E710n-z" and clicking on both "Scan a document or photo" and "Activate Scan to Computer" and also I get a connection error if I try the "HP Scan" software.
I ran the "HP Home Network Diagnostic Utility" but it can't find my printer (odd that it found it to install the software and I can print/ping it all day).
I also ran the "HP Scan Diagnostic Utility 4.2" and it DID find the printer... It also got past the "Connectivity" and "Device Manager" steps and put a check next to them.
It then failed on the "Windows (WIA) Scan" step. I skip it and it fails on the "HP Twian Scan" after giving me a connection related error message. It will not let me continue the test.
I have restarted both computers and printer multiple times. I am running Windows 7 on my laptop and Windows XP on my desktop.I suggest uninstalling the full feature software from both PCs and re-installing and configuring the software on both.
Are you using the HP Solution center to scan? It is in Dutch, but the images are the same as what you should see in a correctly installed full feature software package.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
im trying to find out whats my security answer but there sending to a different account that i dont know about but i want them to send it to my email account please help me get my security answers
Alternatives for Help Resetting Security Questions and/or Rescue Mail
1. If you have a valid rescue email address, then use this procedure:
Rescue email address and how to reset Apple ID security questions.
2. Fill out and submit this form. Select the topic, Account Security. You must
have a Rescue Email to use this option.
3. This is the only option if you do not already have a valid Rescue Email.
These are telephone numbers for contacting Apple Support in your country.
Apple ID- Contacting Apple for help with Apple ID account security. Select
the appropriate country and call. Ask to speak to the Account Security Team.
4. Account security issues almost always require you to speak directly to an
Apple representative to securely establish your identity as the account holder.
You can set it up so that Apple calls you, either immediately or at a time
convenient to you.
1. Go to www.apple.com/support.
2. Choose Contact Support and click Contact Us.
3. Choose Other Apple ID Topics and choose the appropriate topic for
your issue.
4. Follow the onscreen instructions.
Note: If you have already forgotten your security questions, then you cannot
set up a rescue email address in order to reset them. You must set up
the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
Apple ID- All about Apple ID security questions. -
Help me please
You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(93682) -
Can Management Studio connect to a server that is on the same network but not on the same domain?
Should management studio be able to connect to an instance of an sql server that is on the same network but not on the same domain? I am trying to have it do so but am unsuccessful, so to continue to troubleshoot what the issue might be I need to know
whether I am embarking on an exercise in futility.Hello,
That's your issue!
Since you're attempting to use Windows Authentication you'll need to start the SSMS process under the domain credentials of the domain account that has access to that SQL Server. Otherwise windows is going to send you local user token which is going to quickly
be rejected as your local computer user account is not the correct domain account.
You can do this by either using shift+right-click run as different user or from the command line using RunAs /user.
In either case, if you want to use Windows Authentication you'll need to run the SSMS process as that domain user so that you can pass a valid security token.
Edit:
I read that backwards... If it's not on any domain (or member of a workgroup) you'll have a really hard time in using windows authentication as you're limited to LOCAL users on that machine. Thus you could really only use windows auth if you were logged
in locally on that server. I'd either setup a SQL Login for this or join it to a domain.
Sean Gallardy | Blog |
Twitter -
can't restore apple id , because apple were blocked for security reasons, but to restore the need to enter the key two- step werification . after typing it , apple sends a 4-digit code on the ipad , but at ipad I am not connected to icloud ,so i cant get code . but if i want to recover apple id, i need to connect icloud, so what to do? help !
I have (sorry forgot to add that). I was switched around and finally I was told I would be put through to a supervisor but after being on hold for about 10 minutes the phone went dead, I did not lose connection so I do not know if I was hung up on or there was some technical difficulty. I called again yesterday and did in fact speak with a supervisor for Account Security but he told me he did not know why it was happening and put me through to a different number but that ended up not being any helpful either. That's when I decided to give it a shot on here!
-
the conection on my ipod has 3 bars and i am able to connect safari and seach on google but when i try youtube it says "cannot connect to youtube" every time, how can i fix this?
try to exit out of the youtube app with the multitasking feature. if this doesnt work then try to do a manual restart by holding down the home and power/sleep button all the way past the "slide to unlock" screen until the ipod will power off and the apple symbol will appear when the ipod tuens back on
Maybe you are looking for
-
In Visual C++ 6.0 SCardStatus Function
I use MFC library... in Smart Card Library, There is Function that name is ScardStaus... The function requires 7 parameters... sixth parameter ( LPBYTE pbAtr ) returns Card's ATR In my source ScardStaus returns SCARD_S_SUCCESS. That's meen is 'No pro
-
Automatic measures only in 1 color ink (script modification)
Hi all, I would need to modify this script so that put the measure already in es.. PANTONE Pantone 485 (solid coated), I need to change this string, but do not know how... thanks very much // measurement line color var color = new RGBColor;
-
HT1657 Where can i find the movie i have already downloaded from itunes on my ipad ?
Some part make me confused :((
-
Output type not automatically determined (no output device specified)
the output device is already specified for this output we dont want to manually add the output on all the invoices where the output was not automatically determined before... what should we do? is there a way not to manually add them? thanks in advan
-
1 End-2-End Life Cycle Implementation
Hi, Provide me with the detailed information about 1 End-2-End Life Cycle Implementation. How it is done?