Cannot connect to the Service Manager portal WCF service - Error when opening SM Portal
Greetings,
I have tried everything I can think of to resolve this issue and I have tried all suggestions I have found on Technet.
Basically, I had the SM Portal working on a test VM. I am ready to use it in production but it is not working. I deleted my test VM and built a new one. On it, I have SharePoint 2010 Foundation and the SM Portal installed. I have
a valid self-signed cert. the FQDN is correct (hqsrva24.dds.local) in both SharePoint and also in IIS. I also made sure under Application Settings on the SM Portal IIS site points to the FQDN of the SCSMWebContentServer.
So what happens when I go to the SM Portal (https://hqsrva24.dds.local:444/SMPortal) is it prompts me for a logon, which i put in and the site comes up. But at that point the Silverlight portion is not loaded and I immediately get prompted for a logon.
I have tried several different logons, all of which have full access to the site in Sharepoint. Eventually I get the error in red at the bottom of the screen "Cannot connect to the Service Manager portal WCF service"
If I try to access the Web Content Server service on its own (https://hqsrva24.dds.local/Servicehost/services/DataAccessService.svc), I get a prompt to logon and none of my logons work. i eventually get
an unauthorized error. However; If I log into the server which SM Portal is on and go to https://localhost/Servicehost/services/DataAccessService.svc, I get no prompt to login and I get a "Metapublishing for this service is currently disabled."
I'm out of ideas at this point, barring completely starting over (not just the SM portal but all of the Service Manager Suite).
Man I've had this problem so many times and its almost always a different solution. Are you sure that either the Domain Users group or NT Authority\Authenticated Users have permissions to the site and service. remember the the two prompts are authenticating
different things: the Sharepoint site and the application site (silverlight). Make sure users have permission in both SCSM and in Sharepoint.
- Slow is smooth and smooth is fast.
Similar Messages
-
Issue: Lync 2013 users with remote call control enabled cannot connect to the phone system. When the user logs into Lync, they see an exclamation in the bottom right corner
with this error.
Error: Cannot connect to the phone system. An unidentified error has occurred, Please try again. If the problem continues, please contact your support team.
Environment:
1 site: Site1
2 Pools:
1. Lync 2010
Trusted application is added here for the site.
2. Lync 2013
Avaya phone system: AES r6-1-2-32-0
I have not moved the trusted application to the Lync 2013 pool yet, but my understanding is that it should still work since it’s in the site. Is my understanding on this correct? (All of my other trusted applications do work for Lync 2013
users & none of them have been moved yet. Remote Call Control is the only one that does not work.)
This is from the uccapi log. This is just from the user logging in, not actually making a call. Below are the items that I think are important, however, I don’t know how to interpret it to determine if the problem is on the Lync side or
the Avaya side. Here’s a summary:
SIP/2.0 100 Trying
Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="E05700E2", snum="9", rspauth="f308eae87c0bbe64a1ab213574776cbdf9823ab6", targetname="lync03.domain.com",
realm="SIP Communications Service", version=4
From: <sip:[email protected]>;tag=bbb282ebbd;epid=a86d5b0a29
To: <sip:[email protected]>
Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
CSeq: 1 INVITE
Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
Content-Length: 0
SIP/2.0 200 OK
Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="15C0F9A2", snum="13", rspauth="4fd891e39a33e902fb1cec5d980e5bf0ccb172a0", targetname="lync03.domain.com",
realm="SIP Communications Service", version=4
From: <sip:[email protected]
>;tag=bbb282ebbd;epid=a86d5b0a29
To: <sip:[email protected]
>;tag=A7A45C856ECD79121A1827265ABBD7F6
Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
CSeq: 1 CANCEL
Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
Content-Length: 0
SIP/2.0 487 Request terminated
Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="F46EC133", snum="14", rspauth="1d92718caa4f61d967faa46a5c256aafa8b4e740", targetname="lync03.domain.com",
realm="SIP Communications Service", version=4
From: <sip:[email protected]
>;tag=bbb282ebbd;epid=a86d5b0a29
To: <sip:[email protected]
>;tag=A7A45C856ECD79121A1827265ABBD7F6
Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
CSeq: 1 INVITE
Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
ms-diagnostics: 5002;reason="Request was cancelled";AppUri="http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent";source="lync03.
domain.com"
Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
Content-Length: 0Hi Suelizy,
To better understand the issue, I would like to collect the following information for troubleshooting:
1. Do you mean the Lync 2010 user can connect to the Phone System?
2. What’s next hop pool of the application?
In a mixed environment, you must set the next hop pool to be the Lync Server 2013 pool.
Best regards,
Eric -
TS1368 I cannot connect to the iTunes Store. I receive Error Code -1202. This problem began yesterday. I have been successfully connecting to the store for months on this PC. I am running Windows 7 and the Windows Security Center. Thanks for any help.
Hello alankilner,
And welcome to Apple Discussions!
Using Proxy: Yes
Try temporarily disabling this setting by following the steps outlined in this Apple support document.
http://support.apple.com/kb/TS1490
B-rock -
TS1368 "Cannot connect to the iTunes Store. An unknown error has occurred."
"Cannot connect to the iTunes , & I can't download any thing
I am getting the same in Denton, TX on both my iPad3 and Apple TV.
-
Keep getting application Manager missing or damaged error when opening application
Application missing or damaged error when opening application.
Tried CC cleaner
Tried uninstalling and reinstalling
Tried Short file name
Tried AAM patch
Tried installing Creative Cloud
Just plain frustrated not getting this software to work.What version of Premiere Elements is involved?
Premiere 12
And, on what computer operating system is it installed?
Windows 8
What are you doing when you get this message about the Adobe Application Manager?
Opening the application (Premiere)
Have you tried in install the Adobe Application Manager from the following link?
for Windows
Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
for Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
Yes
Tried CC cleaner
Tried uninstalling and reinstalling
Tried Short file name
Tried AAM patch
Tried installing Creative Cloud
Thank you for the assistance. -
For month I cannot connect to the Capital One online account services
Whenever I try to connect to the online services of Capital One in the uk, I get a note "We're sorry, Online Account Services is currently unavailable. I called Capital One and was told: now problem just use the Internet Explorer. But I prefer the Firefox. What can I do.
I assume you have looked at their site:
http://www.capitalone.com/about/browser-support/
Esp empty your cashe. -
I am unable to connect to the iTunes Store. This issue began yesterday, 3/11/13. I previously have been able to connect to the store successfully on this computer which runs Windows 7 and Security Center since November. I also used the iTunes Store on my previous computer for several years. I am able to connect to the store with my new iPod Touch 5th generation. I did a Google search for Error Code -1202 but did not find any pertinent results. I would greatly appreciate any assistance in troubleshooting this situation. Thank you!
Hello alankilner,
And welcome to Apple Discussions!
Using Proxy: Yes
Try temporarily disabling this setting by following the steps outlined in this Apple support document.
http://support.apple.com/kb/TS1490
B-rock -
SM2012 - Portal gives 404 error when opening KB article
In my System Center 2012 Service Manager demo environment, the portal bombs out the 404 error below whenever a user tries to open a Knowledge Base article. This happens with normal end users and administrators, and when done from the Help Articles
search page or from a Service Offering page. So far, everything else is working fine in the portal.
Does anyone have any ideas for troubleshooting this?
Server Error in '/ContentHost' Application.
The remote server returned an error: (404) Not Found.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information
about the error and where it originated in the code.
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
[WebException: The remote server returned an error: (404) Not Found.]
System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult) +3236137
System.ServiceModel.Channels.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult result) +216
[EndpointNotFoundException: There was no endpoint listening at https://MyFQDN.local/ServiceHost/Services/DataAccessService.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.]
System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) +4728723
System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) +1725
Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.IDataAccessService.EndExecute(IAsyncResult result) +0
Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.EndExecute(IAsyncResult result) +323
Microsoft.EnterpriseManagement.Presentation.DataAccess.ProxyDataGateway.ExecuteScalar(DataCommandScalar`1 command) +654
[DataAccessException: There was no endpoint listening at https://MyFQDN.local/ServiceHost/Services/DataAccessService.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.]
Microsoft.EnterpriseManagement.ServiceManager.Portal.ContentHost.KnowledgeArticleHandler.GetEndUserContent(HttpContext context) +1291
Microsoft.EnterpriseManagement.ServiceManager.Portal.ContentHost.KnowledgeArticleHandler.ProcessRequest(HttpContext context) +287
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +625
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +270
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.272
Nash Pherson, Senior Systems Consultant, Now Micro - http://www.nowmicro.com <--- If this post was helpful, please click "Vote as Helpful".
I have the the same problem, when opening an KB article on the web Portal of SCSM2012R2:
[WebException: The remote server returned an error: (404) Not Found.] System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult) +8606675 System.ServiceModel.Channels.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult
result) +222
[EndpointNotFoundException: There was no endpoint listening at http://myserver.xyz.corp:81/ServiceHost/Services/DataAccessService.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present,
for more details.] System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) +14543138 System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) +622
Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.IDataAccessService.EndExecute(IAsyncResult result) +0 Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.EndExecute(IAsyncResult
result) +323 Microsoft.EnterpriseManagement.Presentation.DataAccess.ProxyDataGateway.ExecuteScalar(DataCommandScalar`1 command) +654
[DataAccessException: There was no endpoint listening at http://myserver.xyz.corp:81/ServiceHost/Services/DataAccessService.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more
details.] Microsoft.EnterpriseManagement.ServiceManager.Portal.ContentHost.KnowledgeArticleHandler.GetEndUserContent(HttpContext context) +1292 Microsoft.EnterpriseManagement.ServiceManager.Portal.ContentHost.KnowledgeArticleHandler.ProcessRequest(HttpContext
context) +287 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +913 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +165
But
http://myserver.xyz.corp:81/ServiceHost/Services/DataAccessService.svc
is responding fine. So the endpoint is listening, also the webservice is reachable
this is the actual url which is failing:
https://myserver.xyz.corp/ContentHost/ClientBin/KnowledgeArticleViewer.aspx?ArticleId=4517f8fb-520b-e2ff-635c-8196583a9a05
a call to
https://myserver.xyz.corp/ContentHost/ClientBin/KnowledgeArticleViewer.aspx?ArticleId=
responses with “unrecognized guid format”. so the webservice KnowledgeArticleViewer seems to be reachable. the GUID also is fine (checked with a runbook and this is the proper scobjectid)
seems to be independend of permissions, even members of the administators role have the same issue
any ideas?
regards
Manfred -
Exchange Management Shell (Exch 2010) - Error when opening
Hi,
Ive an Exchange 2010 SP3 server which wont open Exchange Management Shell. When opening it, I get the following:
The term 'ImportPSSession' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At C:\Program Files\Microsoft\Exchange Server\V14\bin\connectfunctions.ps1:64 char:18
+ ImportPSSession <<<< -ClearCache:$false
+ CategoryInfo : ObjectNotFound: (ImportPSSession:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
The only difference I can see between this and another server which works is get-modules shows the output below on the one that works but the one that fails doesnt show anything. (This could be a symptom though rather than the cause.)
ModuleType Name ExportedCommands
Script <ServerNameReplaced>... {Get-IRMConfiguration, New-MailUser, Enable-CmdletExtensionAgent, New-Ac...
Ive tried copying over the files in this article, but it didnt work:
http://blogs.technet.com/b/nawar/archive/2010/09/03/exchange-management-shell-ems-missing-after-applying-exchange-2010-sp1.aspx
Any help appreciated!?
Thanks
StephenBecause that article has files from Exchange 2010 SP1 and you are running SP3.
If you have another server you can copy the file from that server to affected server
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Whenever i try to access the itunes store, it just stays on the page saying loading but never loads and then the error appears. What other ways can i access the itunes store to check my purchases account?
Thankyou for your help !!
i was also wondering, the reason im wanting to access the itunes store is to check my purchasing account because on my account balance ive been overcharged.
I was charged $1.00, but i read that this is for authorisation purposes of my debit cardand that it'll be refunded back to me over a few days. However ive only bought one app which was $1.19, yet i was charged double so $3.38. Do you know whats wrong??
Also how many days does it usually take for the email receipt to be sent to my email and is this email the apple ID email address?? -
Why does the Summary function give a datatype error when opening a data model for editing?
I have two datasets (G1 and G2) within a data model; i've used a field in G2 and placed it into G1 as a Summary Function of G2. The datatype of this field in G2 is Integer, however if you set the Summary field in G1 to the same datatype - Integer, an error appears.
Oracle have provided a patch.
We are running OBIEE at patchset 11.1.1.7.140715, Oracle have provided us with a patch p17563277 backported to the 140715 patchset.
This fix will presumably be incorporated in later releases. -
BPC 75M - Modify Application error "Cannot connect to the Reporting Server"
I have trouble with Modify Application, also in ApShell. Maybe you have a clue what it can be the problem.
Configuration: single server BPC 7.5M SP3, Windows Server 2008 SP2, SQL Server 2008 SP2
Installation user is a domain user.
No errors during installation, no error in Server Manager diagnostics.
But when I try to modify an Application from BPC Admin it gives an error for step "Make OLAP database and Journal/Audit reports. / Validate dimension formulas.".
In tblLogs I see the error message:
==============[System Error Tracing]============== [System Name] :
AdminServerHandler [Message Type] : ErrorMessage [Job Name] :
AdminApplicationHandler : ExecuteModIfyApplication [DateTime] :
10/19/2010 1:19:13 PM [UserId] : MYDOMAIN\MYUSER
[Exception] DetailMsg : {System.Exception: Cannot connect to the Reporting Server at
OSoft.Services.Application.AdminMainServer.AdminApplicationHandler.SetChangeDimensionForAudit(String strAppset, String strApp, String strUserID, Boolean blnIsChangedDimension, String& strErrMsg) at
OSoft.Services.Application.AdminMainServer.AdminApplicationHandler.ExecuteModIfyApplication(String strAppSet, String strApplicationName, String strApplicationDescription, String strSourceApplicationType, String
strNewApplicationType, String strRateApplicationName, String
strOwnerShipApplicationName, String strCurrencyConversionsCalculation,
String strCalculation, String strIntercompanyBookings, String
strUSEliminations, String strOpeningBalance, String strValidations,
String strIntercompanyEliminations, DataTable dtDimensionList, Boolean
bReassignSQLIndex, Boolean bProcessApplication, Boolean bDeleteFact,
String strChangeAppType, String strUserID, String strReportBackID)}
==============[System Error Tracing End ]==============
Edited by: Alexandru Berindei on Oct 26, 2010 7:57 PM
Edited by: Alexandru Berindei on Oct 26, 2010 7:58 PMThere were problems accessing the web page HTTP://server/reports
Error message: "Reporting services 2008 user does not have required permissions"
It was possible to open the page HTTP://server/reports with local administrator user and I fixed this problem by performin following:
- add Content Manager right to bpc installation user
- disable UAC from Windows Control Panel > User Accounts
Still Modify Application gives the same "Cannot connect to Reporting Services".
I tried:
- check that BPC Installation User is part of Local Administrators
- reboot server
- reinstall BPC after disabling UAC
- reinstall everything except the Windows Server 2008
- I installed another computer with the same exact configuration but with a local BPC Installation User and it works.
Have anyone installed BPC 7.5M SP3 on single Windows Server 2008 SP2 , with SQL Server 2008 SP2 and with BPC Installation user a domain user?
Maybe you have an idea of what I should check next.
Thank you,
Alex -
Acrobat cannot connect to the Review Server
I've been invited to a shared review on Acrobat.com. When I download and open the PDF from the Acrobat.com invitation email, I get this error message:
Acrobat cannot connect to the Review Server: Adobe online services.
If I click the "Check for new comments" button in the upper right corner, I get this message:
Could not get new comments. Acrobat did not get a response from the server. Try again later or contact your system administrator.
I can't see other reviewers' comments and can't post my own. I'm definitely online and connected, so not sure what's happening, but have had this error for several weeks now.
My system:
Acrobat XI Pro
MacBook Pro OS X 10.8.5
Safari browser 6.0.5
My Creative Cloud desktop app says Acrobat XI is up to date. I also have Photoshop CC installed.
I've tried logging into Acrobat.com with my Adobe ID before and after opening the PDF, nothing works. Also tried clearing my cache. Is there something in my Acrobat preferences that could be the issue?
Please help.
Thanks,
MarkI am having a similar problem. The review was set up as a test. All our PC colleagues can access as normal. Our 2 Mac machines are not having luck.
Acrobat 10.1.8 Pro
Macbookpro OSX 10.8.5
Error: Could not get new comments. Acrobat did not get a response from the server. Try again later or contact your system administrator.
Could not get new comments. Acrobat did not get a response from the server. Try again later or contact your system administrator.
I'm guessing maybe a proxy issue?... what protocol/port is acrobat tryng to use?
(I tried process above with no luck) -
Cannot connect to the Administration server?
I just installed Hyperion 11.1.2 in Windows 2008, and I'm sure the essbase server is started because I can connect by MaxL, and I can see the Administration server service is started because I can see it in the service list. But When I want to login ADM, error messageL "Cannot connect to the Administration server", please advise?
Error: java.lang.UnsatisfiedLinkError: no environmentjni in java.library.path
java.lang.NoClassDefFoundError: com/essbase/eas/utils/Environment
Error detail:
2010-04-23T23:24:59.576-04:00] [EssbaseAdminServices0] [WARNING] [] [oracle.epm.essbase.eas] [tid: 11] [userId: <anonymous>] [ecid: 0000IWhqB6yDwWWFLzNM8A1BoaI7000000,0] [APP: EAS#11.1.2.0] java.library.path=E:\Oracle\Middleware\user_projects\domains\EPMSystem\bin;.;C:\Windows\system32;C:\Windows;E:\Oracle\Middleware\jrockit_160_14_R27.6.5-32\jre\bin;E:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\native;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;E:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\bin;E:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\bin;E:\Oracle\MIDDLE~1\JROCKI~1.5-3\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;E:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0;E:\Oracle\Middleware\EPMSystem11R1\common\CSS\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\SAP\bin;E:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\JRE\Sun\1.6.0\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;D:\app\serv_hyperion\product\11.2.0\client_1\bin;D:\app\serv_hyperion\product\11.2.0\dbhome_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Intel\DMIX;E:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Common;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Client;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Server;E:\Oracle\Middleware\ohs\bin;E:\Oracle\Middleware\ohs\opmn\bin;E:\Oracle\Middleware\ohs\opmn\lib;E:\Oracle\Middleware\ohs\perl\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin\SQR\Activator\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin\SQR\Viewer\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\lib;E:\OraHome_1\oracledq\tsq11r5s\Software;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\Wbem;D:\app\serv_hyperion\product\11.2.0\dbhome_1\BIN;D:\app\serv_hyperion\product\11.2.0\client_1\BIN;E:\Oracle\Middleware\EPMSystem11R1\BIN;E:\Oracle\Middleware\EPMSystem11R1\common\CSS\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin;E:\OraHome_1\oracledq\tsq11r5s\Software;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\Wbem;D:\app\serv_hyperion\product\11.2.0\dbhome_1\BIN;D:\app\serv_hyperion\product\11.2.0\client_1\BIN;E:\Oracle\Middleware\EPMSystem11R1\BIN;E:\Oracle\Middleware\EPMSystem11R1\common\CSS\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
[2010-04-23T23:24:59.576-04:00] [EssbaseAdminServices0] [ERROR] [ESSEAS-00100] [oracle.epm.essbase.eas] [tid: 11] [userId: <anonymous>] [ecid: 0000IWhqB6yDwWWFLzNM8A1BoaI7000000,0] [APP: EAS#11.1.2.0] Unknown error occurred. See below stack trace for details[[
java.lang.UnsatisfiedLinkError: no environmentjni in java.library.path
Edited by: user2571802 on May 8, 2010 2:01 PM
Edited by: user2571802 on May 8, 2010 6:52 PMI too am getting the same error. When i click the validate 'Validate essbase connection' on the application wizard page, I get a blank page saying 'An errror occured'. I stop the planning service and restarted it from Start button. This time I got the error message
[ERROR] [HspCreateDatasource] - Servlet.service() for servlet HspCreateDatasourc
e threw exception <java.lang.UnsatisfiedLinkError: no HspEssbaseEnv in java.libr
ary.path>java.lang.UnsatisfiedLinkError: no HspEssbaseEnv in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseEnv.<clinit>(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseJniOlap.<clinit>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.TestEssConnection(Unknown Source)
at HspCreateDatasource.doCheckEssbaseConnection(Unknown Source)
at HspCreateDatasource.doHandle(Unknown Source)
at HspCreateDatasource.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF -
Any other suggestions to resolve the error, "cannot connect to the itunes store" ?
Hi paul.labiche,
When having iTunes Store connectivity issues, the following articles provide the best solutions:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks,
Matt M.
Maybe you are looking for
-
Cannot delete photos from iPod nano 3G
My brother, a windozer, has last week bought a iPod Nano. He was playing around a bit and loaded, he don't remember how, some photos on the Nano. He is now desperately trying to remove these photos from his nano. I suggested him to define one folder
-
while opening an excel file created in other computer which is not apple, there are always some strange characters that can be read. how can i solve this problem
-
HELP! An odd display problem
Dear Sirs Please refer to this attached link of screenshow, will make the problem a lot easier to explain: http://www.downloadthis.co.uk/display.jpg I seem to have lost the nice hierarchichal layout of e.g. my computer. I dont know how and why, but
-
Dear SAP Experts, Currently, our automatic credit control is configured as follow: Credit Control --- Reaction ---Block 1) Sales Order --- C (Warning) --- Y 2) Delivery ---C ---Y 3) PGI --- C --- Y By default, if credit check fails at SO creation, us
-
I Can´t open my iphoto, it stays charging.
When i try to open mi i photo it stays charging and i can´t see my photos, help!