Cannot Connect to VPN After License Upgrade

Hello,
I am having an issue where I can't connect to VPN after upgrading the license.
The license upgraded is related to AnyConnect VPN.
I noticed from the newly upgraded license, the Encryption-3DES-AES is disabled whereas previously it was enabled.
Could it be the cause of the issue?
ASA 5512-K9
Version 8.6(1)2
Thank you in advance.
Regards,
Zul

Hello,
It is,
here you have the link to request it for free
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=139
Regards

Similar Messages

  • "Cannot connect to server" after Airport upgrade

    On Monday evening I accepted the updates to my Mac OSX
    10.4.5 system and downloaded the upgrades. It took it to
    10.4.6 and it also contained an Airport upgrade. I
    rebooted and used the Airport admin utility to refresh
    the code in my Airport. Ever since then I cannot access
    the Epson Stylus 740 through my Airport. I moved it's
    cable to go directly to my G4 desktop and it works fine.
    How do I get it working again on my Airport so my wireless
    iBook can print to it?
    RSVP Thanks
    Dan

    I was just out searching for a fix to my Epson 740 printer problem and
    ran across an item at http://www.macintouch.com/readerreports/macosx1041/topic3047.html. It sounds strange but I followed the
    instructions and now my printer works fine through my updated Airport.
    Reset procedure for Epson 740 solves printer error Problem
    When trying to use the Epson 740 printer you get a message that says “Printer not responding. Check your connections.”
    Resolution
    1. Disconnect the USB cable from the printer.
    2. Turn off the printer.
    3. While holding down the ink and paper buttons at the same time, turn the printer on.
    4. Release the ink and paper buttons and press the paper button once.
    5. Plug the printer’s USB cable back in. The printer should now work.
    Dan

  • Cannot connect to VPN after sleep - still works on Windows machine

    Hi Guys,
    I'm very new to using VPN which I now need for work. I recently set up a new connection and it was working fine for a few hours until I closed my MBP lid and sent the machine to sleep. Upon waking the Mac up again the VPN connection appeared to be lost. Trying to reconnect gives me the following error:
    The L2TP-VPN server did not respond. Try reconnecting. If the problem continues, verify your settings and contact your Administrator.
    I've spoken to the sys admin at work and he can't find any problems on his side and the same VPN details appear to work fine on multiple Windows machines. I've tried creating a new connection with the same details and deleting the old one with no success. Tried restarting the machine as well. What other things can I try to potentially get this issue solved?

    I tried BDAqua's suggestion. It did not work.
    System Preferences/Network will not allow a MTU smaller than 72, so I was unable to try a MTU of 53. Maybe there is a configuration file that can be edited manually, bypassing the GUI tool? I tried several other MTU sizes, including 72, no joy. I reset the MTU back to 1492 (to match the router setting) and eventually was able to connect. Running ifconfig in Terminal shows that en0, after connection, still has a MTU of 1492.
    I'm not sure that Mac OS X's dislike of PPPoA has anything to do with it, as this machine never sees PPPoA, it only sees standard TCP/IP - Ethernet. PPPoA is only, best I know, used between the router and the ISP, and no computer on the network cares or is even aware that something such as PPPoA exists. During the time I am unable to connect to the outside with this machine, I am also unable to connect on the inside, despite DHCP on the router having assigned an IP address to the en0 interface.

  • Cannot connect to VPN through NetworkManager anymore.

    I cannot connect to VPN through networkmanager anymore. Last time used it, it worked perfectly but I don't use it so often and last time was 2-3 months ago. So I don't know what went wrong, or which package upgrade broke it.
    I switched to systemd a month ago, it may or may not be related.
    I can still connect from the commandline using the vpn/vpn-disconnect tools.
    All that happens is an alert windows saying: "The VPN connection '......' failed because there were no valid VPN secrets." And here is the journal:
    NetworkManager[355]: <info> Starting VPN service 'vpnc'...
    NetworkManager[356]: <info> VPN service 'vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 9214
    kernel: tun: Universal TUN/TAP device driver, 1.6
    kernel: tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
    NetworkManager[356]: <info> VPN service 'vpnc' appeared; activating connections
    NetworkManager[356]: <error> [1349687970.426748] [nm-vpn-connection.c:1405] get_secrets_cb(): Failed to request VPN secrets #3: (6) No agents were available for this request.
    NetworkManager[356]: <info> Policy set 'MYSSIDOMITTED' (wifi0) as default for IPv4 routing and DNS.
    NetworkManager[356]: <error> [1349687973.943758] [nm-vpn-connection.c:1405] get_secrets_cb(): Failed to request VPN secrets #3: (6) No agents were available for this request.
    NetworkManager[356]: <info> Policy set 'MYSSIDOMITTED' (wifi0) as default for IPv4 routing and DNS.
    NetworkManager[356]: <info> VPN service 'vpnc' disappeared
    All neccessary vpn packages for networkmanager are installed.
    Google did not turn up any useful info other than a few year old threads saying "upgrade your networkmanager".

    Well, I managed to get the auth dialog to show up reliably by applying a couple patches from this Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=679212
    Still getting breakage in that it's not properly authenticating:
    Attempting to connect to redacted:443
    Using client certificate '/CN=redacted'
    Client certificate expires soon at: Dec 5 02:57:05 2012 GMT
    SSL negotiation with somesite.somedomain.com
    Connected to HTTPS on somesite.somedomain.com
    GET https://somesite.somedomain.com/
    Got HTTP response: HTTP/1.0 302 Object Moved
    SSL negotiation with somesite.somedomain.com
    Connected to HTTPS on somesite.somedomain.com
    GET https://somesite.somedomain.com/+webvpn+/index.html
    GET https://somesite.somedomain.com/CACHE/sdesktop/install/binaries/sfinst
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
    GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
    Failed to read from SSL socket
    Error fetching HTTPS response
    This behavior is not what I'm getting from the command-line client, of course, so... still digging.

  • I have several iPod touches and there is always one that cannot connect to wifi. after several weeks it usually rights itself. what is going on?

    I have several iPod touches and there is always one that cannot connect to wifi. after several weeks it usually rights itself. what is going on?

    Matthew...
    Try here > iOS: Troubleshooting Wi-Fi networks and connections

  • ODI Client cannot connect the datebase after the datebase IP changed

    ODI Client cannot connect the datebase after the datebase IP changed.
    1,the datebase on mac A,the mac changed ip
    2,on the client, tnsping db is ok.
    3,use pl/sql ,can connect on the db
    4,with odi,changed the repostry URL to the new db IP,throw the exception below
    java.sql.SQLException: Io Exception: The Network Adapter could not establish the connection
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:274)
         at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
         at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
         at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
         at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
         at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
         at com.sunopsis.sql.SnpsConnection.c(SnpsConnection.java)
         at com.sunopsis.sql.h.run(h.java)
    Is anything we need to config after change db machine IP?

    yeah,I got it.Everything is ok now.
    After change IP,we must open TopologyManager:change the JDBC connection of workrepository which must chose in Designer.
    when we open the Designer ,it will connect to db.then coonect to workrepository with original IP.So,we must rechange workrepository's JDBC first!

  • I cannot connect to FaceTime since I upgraded to Yosemite.

    I cannot connect to FaceTime since I upgraded to Yosemite. It keeps telling me I cannot log in with my apple ID and to contact customer support with this Customer Code: *****. It worked fine before, why is it doing this?
    <Edited By Host>

    Check Settings>General>Date & Time>Set Automatically>On. Make sure that the time zone setting is also set correctly.

  • Cannot connect to iTunes after iOS6 install

    Cannot connect to iTunes after iOS6 install. Tried to reset date forward as others have suggested, has not worked. Any other idea's solutions out there?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Help! I cannot connect Itunes store after my ipad 1 use ios5! Does anyone have a similar problem?

    help! I cannot connect Itunes store after my ipad 1 use ios5! Does anyone have a similar problem?

    Same :(
    Do you have any problem with apps? I can download or update apps without problem. Also no problem with podcasts, but no music, no video or movie: cannot connect to iTunes Store :(

  • TS1368 cannot connect itune store after update ios 6

    cannot connect itune store after update ios 6

    Hello Dannard Lee,
    It sounds like you aren't able to connect to the iTunes Store, or update your device to iOS 8. I would use the troubleshooting from the following article to help troubleshoot the issue, and it seems to be they may be related to one another:
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • I cannot download sny apps after i upgrade to IOS6 ,message keep telling me ' Your session has timed out. Try again. I need help ����

    cannot download sny apps after i upgrade to IOS6 ,message keep telling me ' Your session has timed out. Try again. I need help  

    From Apple Support...
    Here are troubleshooting steps that should help you fix the problem.
    1) Quit App Store in multi-tasking.
    2) Tap Settings.
    3) Tap Safari.
    4) Tap Clear History.
    5) Tap the Clear History button.
    6) Tap Clear Cookies and Data.
    7) Tap the Clear Cookies and Data button.
    Try purchasing an app again from the device to get the security question prompt. You really need to set up the security question.
    ...it seems to have worked for me.....

  • HTF do i get my iPhone to connect to network after iOS7 upgrade? (Upgrade--really?)

    HTF do i get my iPhone to connect to network after iOS7 upgrade?  Upgrade?  Really?   I'm just really upset that I have to continually make concessions to someone else and my product does NOT work the way it should, and has done in the past!!!!

    Depends on your browser and it may appear in your downloads folder to run.  If you are using IE, it will appear on the bottom of the screen, Google Chrome, bottom of the screen, Firefox, top of the screen with an big arrow

  • Unable to connect to VPN after upgrade?

    Hi:
    I had a working VPN running on 10.3.9 Server which I could connect to without a problem. Now, from 10.4.7, I cannot connect to it anymore.
    I can connect to another 10.4.5 Server though.
    I wonder if something has changed in the client side with any of the software upgrades?
    In the system log on 10.3.9 I can see the following error:
    racoon: ERROR: isakmp.c:1087:isakmpph1beginr(): not acceptable Aggressive mode
    kernel: ipfw: 64110 Deny ICMP:8.0 84.218.23.208 82.182.141.81 in via en0
    Again, this messages are now, as I have been using this VPN before without a problem.
    Thanks in advance!
    MacBook Pro   Mac OS X (10.4.7)  

    Hi there.
    Have you had any success by stopped and starting the service?
    (The VPN service tends to stop working after a reboot -- I have another post out about this topic).
    Also, have you checked whether your VPN users are still in the RemoteUsers list for VPN access?
    Cheers,
    Derek

  • Can't connect to VPN after 10.4.10 Upgrade

    Please help me!
    Before I upgrade to 10.4.10 I could connect to VPN.
    But after the upgrade, it just "timed out". In the Console it shows:
    Sep 28 12:22:57 vivivold pppd744: PPTP error when sending echo_reply : Network is unreachable\n
    Sep 28 12:22:57 vivivold pppd744: MPPE disabled
    And I just can't find the solution?!?!?!?!?! Anyone help? (and yes I have written the correct pass and username... )

    Anyone??? please??
    I try to connect to vpn (it is the correct ip and all that)
    And after 59sek (1 min) it stops and says "the connection were lost because the reciever did't respond, try again"
    And the console writes:
    Oct 12 08:25:30 vivivold pppd[3968]: PPTP error when sending echo_reply : Network is unreachable\n
    Oct 12 08:25:30 vivivold pppd[3968]: MPPE disabled
    2007-10-12 08:25:30.641 SystemUIServer[131] Exception raised during posting of notification. Ignored. exception: * -[NSPlaceholderString initWithString:]: nil argument
    Anybody... anything any idea at all??? PLEASE HELP ME!

  • Cannot Connect to Server after Upgrade

    After performing several MS upgrades from MS site, the following error occurs when trying to connect to my local (single computer) Database
    Engine using SQL Server Express 2008 Express:
    TITLE: Connect to Server
    Cannot connect to SR1320NX\SQLEXPRESS.
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not
    found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
    Note that one of the MS upgrades performed was for
    Microsoft SQL Server 2008 Service Pack 3 (KB2546951).
    Additionally, some of the upgrades did not initially install correctly, although they all eventually did install correctly.
    The following is my SQL Server 2008 Express configuration:
    Microsoft SQL Server Management Studio                              
    10.0.5500.0
    Microsoft Data Access Components (MDAC)                           
    3.85.1132
    Microsoft MSXML                                                                     
    2.6 3.0 4.0 6.0
    Microsoft Internet Explorer                                                     
    8.0.6001.18702
    Microsoft .NET Framework                                                      
    2.0.50727.3649
    Operating System                                                                   
    5.1.2600
    And my operating system:
    Microsoft Windows XP, Home Edition, Version 2002, Service Pack 3

    try below links for troubleshooting.
    http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/
    http://social.technet.microsoft.com/wiki/contents/articles/2102.how-to-troubleshoot-connecting-to-the-sql-server-database-engine.aspx
    http://stackoverflow.com/questions/360141/how-to-connect-to-local-instance-of-sql-server-2008-express
    Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
    Praveen Dsa | MCITP - Database Administrator 2008 |
    My Blog | My Page

Maybe you are looking for