Cannot connect to wlan eap-peap athentication fail...

Hi all
I have A nokia N97 which I tried to connect to my work WLAN but I get  eap-peap athentication failed. We do user a certificate which I have installed on the phone but it does not connect. It does not even promt for user name or password. I can connect to my home wireless which just ask for a security key which i enter and it works please please help.
Please help

I got it working please read my How to
/t5/Connectivity/How-to-connect-to-wlan-with-n97-u​sing-ca-certificate/td-p/659372

Similar Messages

  • AMD CPU with Vista cannot connect to WLAN using MS-PEAP with WEP-128

    We have a notebook "HP Pavilion tx1000 (AMD Turion64 CPU with Vista 32bits)". The notebook is using Broadcom 802.11a/b/g chipset, running AMD and Vista. It cannot associate to WLAN using MS-PEAP and WEP-128. Also, it cannot associate to PEAP and WPA2-AES.
    The AP's log shows:
    Oct 11 15:35:20 CCT: %DOT11-7-AUTH_FAILED: Station xxxx.xxx.xxxx Authentication failed
    The ACS's log shows:
    "EAP-TLS or PEAP authentication failed during SSL handshake"
    We do not validate the certificate in the wireless setup. Vista's WLAN AutoConfig is used to configure the wireless profile. We are running Autonomous AP with Switch-Based WDS (WLSM).
    We have no issue with Intel Centrino on the above authentication and encryption scheme.
    Have checked the CCX program, broadcom 802.11a/b/g chipset is supported only for windows 2000 and xp. There is no mentioning about support for vista. Could this be a compatibility issue?
    Please advise and thks

    Maybe look at this post: http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=WLAN%20Radio%20Standards&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddf9be9/5#selected_message

  • Apple MAC Cannot Connect on Wireless Using PEAP Auth

    I have a WLAN setup using the Cisco WiSM, Cisco ACS 4.1.3 as the Radius Server. We are using PEAP as the WLAN Security. THe issue is that all the clients who have Windows OS are able to connect to the WLAN and PEAP works fine.However the users who have Apple MAC OS are unable to connect to the WLAN that has PEAP as the Security setting. The MAC has OS 10.5.6 and I tried upgrading the image however the prob persists. On the ACS server I get in the Failed Log as "Internal Error".
    Can someone help what does the Error mean , and any resolution for the issue.

    Can you provide some detail about how you created the user profile on the Mac? Also - did you put the ACS server's certificate into the Mac's System store so that the Mac will trust the ACS server (or configure the PEAP profile on the Mac to ignore the ACS server's certificate)?

  • E63: WLAN; EAP (PEAP) settings.

    I am a student at UCT. They use a WLAN, with a WPA security mode. The EAP settings i have tried are not working and neither I nor the computer guy could figure it out.
    The WLAN settings I have set are as follows:
    WPA/WPA2 is EAP.
    WPA2 only mode is OFF.
    The EAP plug-in settings are:
    All types of EAPs are disabled apart from the EAP-PEAP.
    those settings are then as follows.
    Personal certificate is NOT DEFINED.
    Authority certificate is Thawte Premium.
    user name in use is USER DEFINED.
    User name is my user name.
    Realm in Use is USER DEFINED.
    Realm is the relevant realm.
    Allow PEAPv0 is yes.
    Allow PEAPv1 is yes.
    Allow PEAPv2 is no. 
    The EAPs: the only one which is active is the EAP-MSCHAPv2.
    Those settings are my user name 
    Prompt password YES
    My password is entered.
    The in terms of Ciphers I have 5 which are selected. I don't know what they do so I have not played with them too much.
    The enabled ones are:
     RSA, 3DES, SHA
    DHE-RSA,3DES, SHA
    DHE-DSS,3DES,SHA
    RSA, AES, SHA
    DHE-RSA, AES, SHA
     I have also tried connecting leaving all else the same but activating all ciphers and then again with no ciphers active.
    The problems i experience are either a endless cycle where i have to enter my user name and password or it simply says 'no gateway reply'.
    Assistance in this would be greatly appreciated as this is one of the primary functions I bought this phone for. 
    Thanks H 

    Are you sure you are using the right certificates and why dont you allow PEAPv2? You might need a personal certificate. Switch off the automatic settings in the advanced settings of your WLAN, scroll down to Power saving and disable to avoid "no gateway".
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Cannot connect to iTunes Store and purchase failed.. As alrdy iTunes took from my credit card 5 US dollars as I was tried 5 times...

    Hello,
    Was trying to purchase from Supercell as I am playing clash of clans. It used to work perfect before but I updated ISO, didn't work anymore and all the time tells failed to purchase. And it says cannot connect to iTunes Store.
    The problem is the iTunes cut from my credit everything I apply to buy from that game and failed to buy what I want to get.
    I am using I pad 2.
    Waiting your feed back regarding this issue.
    I sent an email to support and am still wait for them reply.
    Thanks

    How long ago did you contact iTunes Support ? If it's been longer than 48 hours, and you've checked the spam folder on your email account as well as the inbox, then contact them again : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption.
    The $1 'charges' are likely to be temporary store holding charges, they should disappear off your account within a few days or so.
    Store holding charge : http://support.apple.com/kb/HT3702

  • Cannot connect to itunes store ! Purshase failed !! Why !? How to fix it ?

    I'M from saudi arabia please help me soon !

    محمد
    من فضلك قل لنا القصة كلها بك في التفاصيل حتى نتمكن من الحصول على الصورة الذهنية عن ما كنت تعاني من
    كنت من المملكة العربية السعودية. هل أنت في المملكة العربية السعودية الآن؟
    هل للتسوق في متجر اي تيونز للمملكة العربية السعودية أو التسوق في تيونز بلد آخر؟
    وقال لكم اثنين من الأشياء التي تتضارب
    [1] لا يمكن الاتصال
    و
    [2] فشل شراء - وهو ما يعني أن كنت على اتصال
    مجلس التعاون الجمركي
    ====
    mohammad
    Please tell us your entire story in detail so that we may get a mental picture of what you are experiencing
    You are from Saudi Arabia. Are you in Saudi Arabia now?
    Are you shopping in the iTunes Store for Saudi Arabia or shopping in  another country's iTunes Store?
    You said two things that are conflicting
    [1] you cannot connect
    and
    [2] purchase failed - which means that you were connected
    ÇÇÇ

  • Satellite A500-03P: Cannot connect to WLan using Win 7 + Event message

    Hi all,
    I very recently bought the Satellite A500 with the included offer of Windows7 when it was available end October 09.
    So I got the DVD from Toshibe for the upgrade and followed the steps and upgraded from Visa home premium to Windows 7. I have two issues now.
    1) I am getting a System Event Notification after start up, telling me about the system event log. The full message is below.
    Failed to connect to a windows service
    Windows could not connect to the System Event Notification Service service. This problem prevents limited users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond
    2) I was able to use this laptop for the internet PRIOR to the upgrade, both via a wireless USB drive as well at office via a modem ADSL.
    Now I cannot access the internet after the Windows 7 upgarde!!
    As an example the Optus dial up pop up box appears andwhen I click "connect" it does not connect.
    Can anyone help please??
    Thanks
    C I

    Hey buddy,
    1)Have you checked the Service Configuration for this service? The start up type of System Event Notification Service must be always set to Automatic. This service is absolutely necessary for Windows and shouldnt be disabled or set to manual start type.
    Check this!
    2)To be honest I never heard about internet PRIOR but normally it should also be possible to access the Internet with Windows 7.
    Make sure that the WLAN and/or LAN card is installed properly and check the TCP/IP settings. If you are missing some driver you can get it on the Toshiba page.

  • Cannot connect to WLAN on E63

    Hi,
    I had my home network setup sweet for a while but then my phone started dropping the connection like crazy. One second I could go to a webpage and then the next it would say WLAN not found. Keep in mind this was literally 10cm from the wireless router.
    Now at work I tried connecting to the WLAN after following a very comprehensive guide put together by our IT department with all the required details. I also downloaded the required certificate and opened it (selecting all 3 of the options that come up, whatever they were).
    Another person at work has the E65 and they connected fine. I have attached the settings I used in case you can spot something wrong. 
    Cheers 
    Attachments:
    ESeries WLAN Configuration.txt ‏1 KB

    My problem is like Harry (whose question I think was answered by cjlim). I have an E63 which I purposely I have do not have my SIM in, as I wish to use it, a) to answer SKYPE calls around the house which I work from thne b) I'm going to transfer my agenda from my PSION 5MX/Outlook and then c) convert the many data files from it, but first the wireless link. Now I have taken out my SIM, I can see my wireless link is recognised but as soon as I move to say Bookmarks etc I get I cannot get say SKYPE to work as it tells me unable to use Network. Phone is in offline mode. Has anyone any suggestions, have been through some of the other areas of the forum, this seems close to my problems! Cheers beecee

  • Satellite E300 cannot connect to WLan

    Hi,
    I have also bought a new Toshiba Satellite e300 yesterday. I have the same issues and have updated to the latest firmware. What is perplexing is, I have 3 other laptops(mac, older toshiba & acer) and 3 iphones, they are all able to connect to my wireless lan and it's only the new toshiba that can't.
    The other devices could see other wireless lans in my vicinity while the new toshiba could only see my own wireless with only a bar of signal strength.
    Seems like the Atheros device is the only issue. Your advice is greatly appreciated.

    >...updated to the latest firmware
    Firmware? What firmware?
    Maybe other laptops dont use WLAN standard n and your new laptop can do this. Who knows which standards use all these WLANs. Try to check WLAN settings on your router and your new Toshiba.

  • Cannot connect to WLAN

    I just got my iPad today and there is no way I am able to connect to my home WLAN network. It is a WPA-PSK protected network. The modem is Arcor-DSL-WLAN-Modem 200. I have turned the firewall off in my modem settings, but still no luck. Please help!!!

    It has assigned an IP address of 169.254.18.4 with a subnet mask of 255.255.0.0. The DNS is 195.50.140.246 which is what I see on the system status of my router as well. Here is more information about the system status on my router:
    Systemname: P660HW-T7
    ZyNOS Firmware-Version: V3.40(ACU.0) | 12/23/2005
    DSL Firmware-Version:DMT FwVer: 3.3.0.55BTC, HwVer: T14F7_0.0
    Standard:ADSL_G.dmt
    WAN-Informationen
    IP-Adresse:82.82.87.136
    IP-Subnet-Maske:255.255.255.255
    Standard-Gateway:ArcorDSL
    Primärer DNS:195.50.140.246
    Sekundärer DNS:195.50.140.252
    VPI/VCI:1/ 32
    LAN-Informationen
    MAC-Adresse:00:13:49:48:15:20
    IP-Adresse: 192.168.1.1
    IP-Subnet-Maske: 255.255.255.0
    DHCP: Server
    DHCP-Startadresse: 192.168.1.33
    Größe IP-Folge für DHCP: 32
    WLAN Informationen
    ESSID:ArcorWLAN
    Kanal: 6
    WEP: Disable

  • Satellite Pro M70: Cannot connect to WLan with ConfigFree

    Hi in Forum.
    I'm having trouble with a Satelite Pro M70, concerning gaining control of wireless conections.
    When scanning with "The Radar" i ConfigFree for available wireless accesspoints, I get several points available, but is not able to connect to a single one of them. I can read their status and see their WEP encryption marker.
    When I try to connect to any one of them, I get a pop up dialog box, which says (translated from danish) "Another suppliers software is in control of the wireless adapter". When trying to set up a connection through the classic windows way, windows states that "windows is not able to configure this wireless connection - if you have another program to administrate wireless connections you must use this". I suppose it refers to ConfigFree...?
    Is the unnamed "other supplier" Windows related or maybe McAfee related (Security Suite 2007)?
    If you're familiar with this problem or something like it I would be please to know.
    By the way - where do I enter WEP encryption keys for my friends WLAN routers in ConfigFree?

    > When trying to set up a connection through the classic windows way, windows states that "windows is not able to configure this wireless connection - if you have another program to administrate wireless connections you must use this". I suppose it refers to ConfigFree...?
    It must be not a ConfigFree. Depending on you WLan card an Intel ProSet utility or a Atheros Client utility could controls the Wlan configuration!
    Please check if one of the both tools controls the wlan and disable the function!
    > where do I enter WEP encryption keys for my friends WLAN routers in ConfigFree
    You should have three different tabs in the Configfree utility.
    The second one Device settigns provides device list and there you should find Wireless network connection.
    Choose it and use the button Network connections.
    There you should find some encryption settings!
    Please check also the Profile settings tab and the option called Security settings

  • Satellite Pro 6100 - Cannot connect to WLAN router

    Hi there,
    I have brought a 2nd hand Satellite Pro, Model version SP6100 (PS610E-029ZV-EN), P4 1.7Ghz, 512Mb, 30GB, with Windows 2000 Pro loaded.
    I cannot get the wireless to connect to my router. The switch is in the correct position.
    I want to change to XP using the key supplied with the laptop from new (dual OS) however I can't get it to reformat using an XP disc at start up or if I use the recovery cd (start with holding C down and release when it runs up) it begins but displays "invalid drive specification" three times and loads Win2000.
    Can anyone advise how (or if!) I can reformat as I would like?
    Any help will be greatly appreciated.
    Cheers.

    Hi Jaba,
    I'm quite happy to 'start again' and erase the existing partions via reformatting however I do not know how. I have tried starting with the XP disk in the dvd drive but it starts up in to 2000 without reading the XP disk.
    I would prefer WXP than W2000 as it will be for home use.
    If you or anyone else can advise on how I proceed from here I would be very grateful.
    Cheers All.

  • Qosmio X300-13G - Cannot connect to WLan router using N draft

    Hi
    I've bought a Qosmio X300-13g (the only one availabe on Portugal :/ ) and i've tried to connect it to a wirelles N network, but I always receive an error:
    windows couldn't connect 'cause the defenitions of the router are different from yours...
    Well do you know why? I've tried with several routers and it's always the same..
    Tks
    Regards

    Hi
    Yes, i've tried with a SMC WBR14S-N2 and now I'm using a Sitecom 300N (wl-183 / wl-541), I only receive the error when I choose the N mode, when I try the Mixed (G-N) it works (the computer connect with the G mode)
    Thanks

  • Cannot connect to WLAN because FN+F8 doesnt work!?

    Can anybody help or I have to get my notebook to guarantee. I have problem with wireless capability of my computer because FN+F8 doesnt work. I bought my notebook 3 days ago and thats very big problem for me. I have to get to wireless connection.
    Please help
    Riuno

    I had the same problem on my new L300 laptop and the wireless adapter couldn't be found.
    I was advised by my dealer that this is a problem that the software was not installed by Toshiba and the solution is to
    create a backup DVD and reboot from that.
    I created the DVD and the machine advised me to shut down & install some updates that had materialised.
    The updates solved my problem.
    I didn't get as far as rebooting from the DVD.
    I don't know if the process of creating the backup opened the wireless driver, or whether while searching this forum (using a cable) the computer automatically checked for windows updates, but any way, it now works!

  • WPA2 EAP-PEAP error, may be Windows Server 2008 or...

    I've studied posts like /t5/Connectivity/Not-able-to-connect-to-company-WLAN-WPA2-AES-PEAP-with-E71/m-p/420301/highlight/tru... , updated firmware, no joy. On E71, get
    WLAN: EAP-PEAP authentication failed
    In the event log of the domain controller+NPS server, get:
    Log Name:      Security
    Source:        Microsoft-Windows-Security-Auditing
    Date:          5/19/2010 10:24:18 AM
    Event ID:      6274
    Task Category: Network Policy Server
    Level: Information
    Keywords: Audit Failure
    User: N/A
    Computer: Actinium.s********.com
    Description: Network Policy Server discarded the request for a user. Contact the Network Policy Server administrator for more information.
    User:
         Security ID: S****\****
         Account Name: d***@*****.com
         Account Domain: S*******
         Fully Qualified Account Name: S******\*****
    Client Machine:
         Security ID: NULL SID
         Account Name: -
         Fully Qualified Account Name: -
         OS-Version: -
         Called Station Identifier: 000B8651*****
         Calling Station Identifier: 0021FE3****
    NAS:
         NAS IPv4 Address: 10.0.1.253
         NAS IPv6 Address: - NAS Identifier: 10.0.1.253
         NAS Port-Type: Wireless - IEEE 802.11
         NAS Port: 1
    RADIUS Client:
         Client Friendly Name: OAW-4308
         Client IP Address: 10.0.1.253
    Authentication Details:
         Connection Request Policy Name: Secure Wireless Connections
         Network Policy Name: Secure Wireless Connections
         Authentication Provider: Windows Authentication Server: Actinium.s********.com
         Authentication Type: EAP
         EAP Type: -
         Account Session Identifier: -
         Reason Code: 1
         Reason: An internal error occurred. Check the system event log for additional information.
    I get a different "Reason" when I deliberately use the wrong certificate, so that part is probably OK. Tried many combinations of sAMAccountName, userPrincipalName, etc. in user and realm fields. I saw a perhaps related issue with somebody using a maemo device that stopped working when they upgraded to Windows Server 2008 on the back end. No problem with iPhones, Blackberry Storms, laptops.
    Help...

    In the SCVMM world a 'template' is composed of the following: a VHD with an OS that has been generalized (sysprep), virtual hardware profile (settings), and an OS profile.
    The OS profile is required to have a product key.  A MAC activation key at the minimum.  But the key is required.
    If you deploy a VM from a VHD, the same customization assumptions are not at play.  Which is why it succeeds.  (there is no template in this case, there is also no requirement that the OS in the VHD be sysprep'd).
    SCVMM has rules.  And lots of things don't make sense until you begin to understand them and play within them. (I am not saying that the SCVMM rules are a good thing, just saying they exist)
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

Maybe you are looking for