Cannot connect to WLAN

I just got my iPad today and there is no way I am able to connect to my home WLAN network. It is a WPA-PSK protected network. The modem is Arcor-DSL-WLAN-Modem 200. I have turned the firewall off in my modem settings, but still no luck. Please help!!!

It has assigned an IP address of 169.254.18.4 with a subnet mask of 255.255.0.0. The DNS is 195.50.140.246 which is what I see on the system status of my router as well. Here is more information about the system status on my router:
Systemname: P660HW-T7
ZyNOS Firmware-Version: V3.40(ACU.0) | 12/23/2005
DSL Firmware-Version:DMT FwVer: 3.3.0.55BTC, HwVer: T14F7_0.0
Standard:ADSL_G.dmt
WAN-Informationen
IP-Adresse:82.82.87.136
IP-Subnet-Maske:255.255.255.255
Standard-Gateway:ArcorDSL
Primärer DNS:195.50.140.246
Sekundärer DNS:195.50.140.252
VPI/VCI:1/ 32
LAN-Informationen
MAC-Adresse:00:13:49:48:15:20
IP-Adresse: 192.168.1.1
IP-Subnet-Maske: 255.255.255.0
DHCP: Server
DHCP-Startadresse: 192.168.1.33
Größe IP-Folge für DHCP: 32
WLAN Informationen
ESSID:ArcorWLAN
Kanal: 6
WEP: Disable

Similar Messages

Cannot connect to wlan eap-peap athentication fail...

Hi all
I have A nokia N97 which I tried to connect to my work WLAN but I get eap-peap athentication failed. We do user a certificate which I have installed on the phone but it does not connect. It does not even promt for user name or password. I can connect to my home wireless which just ask for a security key which i enter and it works please please help.
Please help

I got it working please read my How to
/t5/Connectivity/How-to-connect-to-wlan-with-n97-using-ca-certificate/td-p/659372

AMD CPU with Vista cannot connect to WLAN using MS-PEAP with WEP-128

We have a notebook "HP Pavilion tx1000 (AMD Turion64 CPU with Vista 32bits)". The notebook is using Broadcom 802.11a/b/g chipset, running AMD and Vista. It cannot associate to WLAN using MS-PEAP and WEP-128. Also, it cannot associate to PEAP and WPA2-AES.
The AP's log shows:
Oct 11 15:35:20 CCT: %DOT11-7-AUTH_FAILED: Station xxxx.xxx.xxxx Authentication failed
The ACS's log shows:
"EAP-TLS or PEAP authentication failed during SSL handshake"
We do not validate the certificate in the wireless setup. Vista's WLAN AutoConfig is used to configure the wireless profile. We are running Autonomous AP with Switch-Based WDS (WLSM).
We have no issue with Intel Centrino on the above authentication and encryption scheme.
Have checked the CCX program, broadcom 802.11a/b/g chipset is supported only for windows 2000 and xp. There is no mentioning about support for vista. Could this be a compatibility issue?
Please advise and thks

Maybe look at this post: http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=WLAN%20Radio%20Standards&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddf9be9/5#selected_message

Cannot connect to WLAN on E63

Hi,
I had my home network setup sweet for a while but then my phone started dropping the connection like crazy. One second I could go to a webpage and then the next it would say WLAN not found. Keep in mind this was literally 10cm from the wireless router.
Now at work I tried connecting to the WLAN after following a very comprehensive guide put together by our IT department with all the required details. I also downloaded the required certificate and opened it (selecting all 3 of the options that come up, whatever they were).
Another person at work has the E65 and they connected fine. I have attached the settings I used in case you can spot something wrong.
Cheers
Attachments:
ESeries WLAN Configuration.txt ‏1 KB

My problem is like Harry (whose question I think was answered by cjlim). I have an E63 which I purposely I have do not have my SIM in, as I wish to use it, a) to answer SKYPE calls around the house which I work from thne b) I'm going to transfer my agenda from my PSION 5MX/Outlook and then c) convert the many data files from it, but first the wireless link. Now I have taken out my SIM, I can see my wireless link is recognised but as soon as I move to say Bookmarks etc I get I cannot get say SKYPE to work as it tells me unable to use Network. Phone is in offline mode. Has anyone any suggestions, have been through some of the other areas of the forum, this seems close to my problems! Cheers beecee

Satellite A500-03P: Cannot connect to WLan using Win 7 + Event message

Hi all,
I very recently bought the Satellite A500 with the included offer of Windows7 when it was available end October 09.
So I got the DVD from Toshibe for the upgrade and followed the steps and upgraded from Visa home premium to Windows 7. I have two issues now.
1) I am getting a System Event Notification after start up, telling me about the system event log. The full message is below.
Failed to connect to a windows service
Windows could not connect to the System Event Notification Service service. This problem prevents limited users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond
2) I was able to use this laptop for the internet PRIOR to the upgrade, both via a wireless USB drive as well at office via a modem ADSL.
Now I cannot access the internet after the Windows 7 upgarde!!
As an example the Optus dial up pop up box appears andwhen I click "connect" it does not connect.
Can anyone help please??
Thanks
C I

Hey buddy,
1)Have you checked the Service Configuration for this service? The start up type of System Event Notification Service must be always set to Automatic. This service is absolutely necessary for Windows and shouldnt be disabled or set to manual start type.
Check this!
2)To be honest I never heard about internet PRIOR but normally it should also be possible to access the Internet with Windows 7.
Make sure that the WLAN and/or LAN card is installed properly and check the TCP/IP settings. If you are missing some driver you can get it on the Toshiba page.

Satellite E300 cannot connect to WLan

Hi,
I have also bought a new Toshiba Satellite e300 yesterday. I have the same issues and have updated to the latest firmware. What is perplexing is, I have 3 other laptops(mac, older toshiba & acer) and 3 iphones, they are all able to connect to my wireless lan and it's only the new toshiba that can't.
The other devices could see other wireless lans in my vicinity while the new toshiba could only see my own wireless with only a bar of signal strength.
Seems like the Atheros device is the only issue. Your advice is greatly appreciated.

>...updated to the latest firmware
Firmware? What firmware?
Maybe other laptops dont use WLAN standard n and your new laptop can do this. Who knows which standards use all these WLANs. Try to check WLAN settings on your router and your new Toshiba.

Satellite Pro M70: Cannot connect to WLan with ConfigFree

Hi in Forum.
I'm having trouble with a Satelite Pro M70, concerning gaining control of wireless conections.
When scanning with "The Radar" i ConfigFree for available wireless accesspoints, I get several points available, but is not able to connect to a single one of them. I can read their status and see their WEP encryption marker.
When I try to connect to any one of them, I get a pop up dialog box, which says (translated from danish) "Another suppliers software is in control of the wireless adapter". When trying to set up a connection through the classic windows way, windows states that "windows is not able to configure this wireless connection - if you have another program to administrate wireless connections you must use this". I suppose it refers to ConfigFree...?
Is the unnamed "other supplier" Windows related or maybe McAfee related (Security Suite 2007)?
If you're familiar with this problem or something like it I would be please to know.
By the way - where do I enter WEP encryption keys for my friends WLAN routers in ConfigFree?

> When trying to set up a connection through the classic windows way, windows states that "windows is not able to configure this wireless connection - if you have another program to administrate wireless connections you must use this". I suppose it refers to ConfigFree...?
It must be not a ConfigFree. Depending on you WLan card an Intel ProSet utility or a Atheros Client utility could controls the Wlan configuration!
Please check if one of the both tools controls the wlan and disable the function!
> where do I enter WEP encryption keys for my friends WLAN routers in ConfigFree
You should have three different tabs in the Configfree utility.
The second one Device settigns provides device list and there you should find Wireless network connection.
Choose it and use the button Network connections.
There you should find some encryption settings!
Please check also the Profile settings tab and the option called Security settings

Satellite Pro 6100 - Cannot connect to WLAN router

Hi there,
I have brought a 2nd hand Satellite Pro, Model version SP6100 (PS610E-029ZV-EN), P4 1.7Ghz, 512Mb, 30GB, with Windows 2000 Pro loaded.
I cannot get the wireless to connect to my router. The switch is in the correct position.
I want to change to XP using the key supplied with the laptop from new (dual OS) however I can't get it to reformat using an XP disc at start up or if I use the recovery cd (start with holding C down and release when it runs up) it begins but displays "invalid drive specification" three times and loads Win2000.
Can anyone advise how (or if!) I can reformat as I would like?
Any help will be greatly appreciated.
Cheers.

Hi Jaba,
I'm quite happy to 'start again' and erase the existing partions via reformatting however I do not know how. I have tried starting with the XP disk in the dvd drive but it starts up in to 2000 without reading the XP disk.
I would prefer WXP than W2000 as it will be for home use.
If you or anyone else can advise on how I proceed from here I would be very grateful.
Cheers All.

Qosmio X300-13G - Cannot connect to WLan router using N draft

Hi
I've bought a Qosmio X300-13g (the only one availabe on Portugal :/ ) and i've tried to connect it to a wirelles N network, but I always receive an error:
windows couldn't connect 'cause the defenitions of the router are different from yours...
Well do you know why? I've tried with several routers and it's always the same..
Tks
Regards

Hi
Yes, i've tried with a SMC WBR14S-N2 and now I'm using a Sitecom 300N (wl-183 / wl-541), I only receive the error when I choose the N mode, when I try the Mixed (G-N) it works (the computer connect with the G mode)
Thanks

Cannot connect to WLAN because FN+F8 doesnt work!?

Can anybody help or I have to get my notebook to guarantee. I have problem with wireless capability of my computer because FN+F8 doesnt work. I bought my notebook 3 days ago and thats very big problem for me. I have to get to wireless connection.
Please help
Riuno

I had the same problem on my new L300 laptop and the wireless adapter couldn't be found.
I was advised by my dealer that this is a problem that the software was not installed by Toshiba and the solution is to
create a backup DVD and reboot from that.
I created the DVD and the machine advised me to shut down & install some updates that had materialised.
The updates solved my problem.
I didn't get as far as rebooting from the DVD.
I don't know if the process of creating the backup opened the wireless driver, or whether while searching this forum (using a cable) the computer automatically checked for windows updates, but any way, it now works!

Cant connect to WLAN?

After installing IOS 4.0.2 on my iPhone cannot connect to WLAN anymore. Mostly it dont fint any WLAN's at all. Sometimes i can find a network, but when I try to connect I cant. No matter if it is an open WLAN or encrypted.
Is this a known problem with this upgrade?

I have found the cover over the sim card slot is a little fiddly to insert into the slot. Can you connect to your network operator (gsm or 3g) or does the phone stay in offline mode. A little more info would help.

Cannot connect E71 using Wlan

Hi,
Since I have purchased E71 I have never been able to connect via Wlan. Are there any advance setting to be done.
Wlan get detected on the phone but when I try to browse using the access point it says cannot connect.
Thanks,
Sameer

Hi,
which security settings, you have enabled on your hotspot ?
Whcih WLAN standard is used (b\a\g\n) ?
What Router is used ?
Guess we need to have this information to help you out further.
Br, Oliver

Win 7 PC cannot connect to Time Capsule - despite flawless I'net connection

Hi, strange thing and I'd appreciate if someone knew a trick to solve it:
Although my Windows notebook can connect to the internet via our Time Capsule (WPA2 key, AES encryption) without any problems for a long time now, I cannot connect to it via AirPort even with the correct WPA key.
When running the AirPort utility I can see our TC with its name and IP address (10.0.1.1 as usual, I think) in the main view. After clicking "Manual Setup" or "Continue" in the main view, AirPort asks for the password.
After entering the password (same as the one that is in my settings for the WLAN connection via TC, of course), *TC REFUSES TO CONNECT* and the *"Enter password" window will appear over and over again*. No specific error message given.
The WLAN connection has been set up using the MacBook (I once read this could be a problem). Working proberly
all the time, though.
Tried deactivating both firewall and virus protection of my Norton security package on my Lenovo - no effect.
Background:
We intend to use an external USB hard drive which is connected to our Time Capsule. After TC has moaned that the drive had to be "repaired", we created partitions for Mac (OS X) and Windows (FAT) partition from the MacBook.
The MacBook can access the drive and partitions. Fine.
The Windows 7 notebook won't show the hard drive nor the Time Capsule. Thus, I have installed AirPort utility (V 5.5.1) to get access to the USB hard drive. And there I am - kinda stuck halfway...
Hardware setup:
Lenovo ThinkPad X61, Windows 7 Pro
MacBook, OS X 10.5.8
Time Capsule
1.0TB Buffalo Drive Station USB 3.0 plugged into Time Capsule
Help would be very much appreciated!
Thanks a lot,
Mark

I found something that worked for me. I got Error Number 53 when trying to connect to my time capsule using Airport Base Station Agent with windows vista. I think the issue is allowing your time capsule to be accessed over Bonjour; I think this feature is disabled by default. Well, here is what I did (also, this may answer the question for those of you who are confused to why it asks for a username/password when you attempted to map the time capsule's hdd) -
In Airport Utility: Airport >> Time Capsule
- Click "Edit..." and check the "Use dynamic global hostname" box.
- Enter in the info (for hostname, I used the same name as the local Hostname (at the top of that window, for user/password -- The info you enter here is the same info you must enter when you are prompted to, that is if you try to map the time capsule's hdd)
- Click "OK"
In Airport Utility: Disks >> Files Sharing
- Make sure "Share disks over WAN" is checked AND make sure "Share disks over the Internet using Bonjour" is checked as well.
- Click OK.
In Airport Utility: Click "Update", let it reset, and try accessing the Time Capsule via Airport Base Station Agent as you usually would/or mapping the harddrive"
In summary, since vista uses Bonjour, you must make sure your time capsule is 'Bonjour-accessible'
I Hope this solution alleviates a lot of people's problems!!!
Oh yea, this solution worked with firmware 7.4.1
AND...prior to trying this method, I did enable NETBIOS. It was enabled while I did this solution (and still is). I haven't tried it with it disabled (well maybe not disabled - it's on automatic by default).

ITunes 9.2.0.61 cannot connect to iTunes Store

To make a long story short, I have been through the forums and tried everything to no avail. I was asked to update iTunes in order to update my iPhone to ver 4. This was 3 days ago and I still have not updated my iPhone. I have updated iTunes to the above and cannot connect to itunes store. I have tried the forums which seems to have improved things but it is still not working. I have access to the iTunes store from my laptop and iPhone (Wifi) When I run iTunes and try to access the store it says "iTunes could not Connect to the iTunes Store. Make sure your network connection is active and try again"
If I go to the iTunes help tab and Run Diagnostics, the Network connectivity test passes and verifies all ok???????????????
I am not an IT guy but to my way of thinking, something is pointing iTunes to the wrong place when it wants to go to the store. I have spent enough time trying to fix my PC after apple broke it and would like to just upgrade my iPhone 3gS. I am waiting for an email from Apple since yesterday but would appreciate it if someone here could help me get this sorted.
Herewith the additional info that may be required as well as verification that I should be able to connect to iTunes store.
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
Dell Inc. Vostro1510
iTunes 9.2.0.61
QuickTime 7.6.6
FairPlay 1.8.20
Apple Application Support 1.3
iPod Updater Library 9.2d4
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.1.0.62
Apple Mobile Device Driver 1.49.0.0
Bonjour 2.0.2.0 (214.3)
iTunes Serial Number 50D4A26C8592F897
Current user is an administrator.
The current local date and time is 2010-06-24 11:01:57.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Video Display Information
NVIDIA GeForce 8400M GS
** External Plug-ins Information **
No external plug-ins installed.
iPodService 9.2.0.61 is currently running.
iTunesHelper 9.2.0.61 is currently running.
Apple Mobile Device service 3.1.0.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {D25AF4E1-5629-4695-A88C-33EB9B542680}
Description: Dell Wireless 1395 WLAN Mini-Card - Packet Scheduler Miniport
IP Address: 192.168.0.116
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.252
DHCP Enabled: Yes
DHCP Server: 192.168.0.250
Lease Obtained: Thu Jun 24 07:32:34 2010
Lease Expires: Fri Jul 02 07:32:34 2010
DNS Servers: 192.168.0.250
192.168.0.250
Adapter Name: {6322B6B8-7B23-4D8C-829C-D093ADFB2A84}
Description: Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC - Packet Scheduler Miniport
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server: 192.168.0.250
Lease Obtained: Wed Jun 23 13:50:08 2010
Lease Expires: Thu Jul 01 13:50:08 2010
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: Yes
HTTP Proxy: 192.168.0.252:8080
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-04-21 19:51:31.
Message was edited by: Gerrie Coetzee

I would really try this...
Edit > Preferences > Parental Control and check iTunes Store, Allow access to iTunes U and click OK. Try going to the store. Then go back to Preferences and uncheck iTunes Store
or the LAN settings..
After sitting at my computer for HOURS on Wednesday trying almost everything everyone suggested... I logged back into my PC Thursday & somehow my iTunes store was connected. I have absolutely no idea what I did. Point is you should probably try those, turn it off then turn it back on & see if that helps. I really wish I could help. I know exactly how much of a pain this entire issue can be.. Good luck!

Help...downloaded new version of itunes...and now I cannot connect

I just downloaded new version of itunes and now I cannot connect to the itunes store...I get a message that says..."Itunes cannot connect to itunes store. the network connection timed out."
ran diagnostics here are the results... if anyone can help...
Microsoft Windows Vista Home Premium Edition (Build 6000)
Hewlett-Packard Presario F700 (GR967UA#ABA)
iTunes 8.2.0.23
QuickTime 7.6.2
FairPlay 1.4.10
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.5.0.31
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number D3C70EE5E29DDAC2
Current user is not an administrator.
The current local date and time is 2009-06-09 23:19:03.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce Go 6100
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {C07101F5-89CB-4921-9239-F59263AF4FAA}
Description: Broadcom 802.11b/g WLAN
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Tue Jun 09 22:30:17 2009
Lease Expires: Wed Jun 10 22:30:17 2009
DNS Servers: 192.168.1.1
192.168.1.1
Adapter Name: {33E3719A-76B1-48B1-9F31-BD3CBF2DBDDA}
Description: NVIDIA nForce Networking Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iPhone activation server unsuccessful.
The network connection timed out.
Last successful store access was 2009-06-08 09:41:24.
** CD/DVD Drive Tests **
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.1.0.1),
E: TSSTcorp CD/DVDW TS-L632M, Rev 0A17
Audio CD in drive.
Found 1 songs on CD, playing time 04:24 on Audio CD.
Track 1, start time 00:02:00
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 10 16 20 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
** iPod/iPhone Connectivity Tests **
iPodService 8.2.0.23 is currently running.
iTunesHelper 8.2.0.23 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Device Not Currently Connected:
iPod nano (Second Generation) running firmware version 1.1.1
Serial Number: 7J651R7ZVQ5
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.

Are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? There have been reports that some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
Check the settings for your utility. If iTunes is still listed, remove and re-enable the exception for iTunes. Consult your utility's documentation for the appropriate procedure; you can find instructions for Norton on Symantec's web page for iTunes. You may also need to check the built-in Windows firewall as well.
Hope this helps.

Cannot connect to WLAN

Similar Messages

Maybe you are looking for