Cannot connect to work using Nortel Vpn Client

Hi Guys,
I have a linksys router at home and I am unable to connect to work using the Nortel VPN Client, it works intermittently.. sometimes it connects but most of the time it comes back with an error saying " Login Failure: remote host not responding"
But when i ping the FQDN of my company's vpn box I get a successfull reply,  I did a small test and connected to a random wi-fi connection near my house and after I was connected to that I was able to use my vpn client to connect and connect to work so there has to be something wrong with the linksys router settings I have.
I tried logging on to the admin page of the router by going to 192.168.1.1 and under the security tab under vpn I enabled all the protocols for thr VPN passthorough but the problem still persists.. any ideas??
Thanks in advance
A

Set the MTU to 1500
uncheck Filter Internet Request.
turn off any third party firewall.
Yesterday is history. Tomorrow is mystery. Today is a gift.

Similar Messages

  • Problem accessing company resources remotely using Cisco VPN Client

    I connect to my company's network remotely using Cisco VPN client both from a PC (v 4.0.1) and from a MacBook Pro (v 4.9.00)(same configs), and use Remote Desktop to connect to my work computer, and now i'm able to use Citrix to run applications on the company server.
    The problem occurs on the Mac when I'm connecting from a location that uses the same private domain IP as our company's private domain. Our company's private domain is 192.168.1.x, so when I'm using the Mac on a WiFi router that happens to be set to 192.168.1.1, the Mac can connect using VPN but the remote desktop cannot connect to my work computer. Presumably, the Mac doesn't "know" that I'm trying to go through the VPN for the connection and not connect to something locally.
    This problem seems to be unique to the Mac. Every Windows machine with the same client installed has no problems no matter what WiFi I've tried. The Mac works fine on any WiFi that is not 192.168.1.x.
    However, since 192.168.1.x is very common (hotels, airports, etc., its a major problem with the Mac.
    Suggestions are greatly appreciated!
    Also, now that we're moving to Citrix, our administrator has created a webpage on the intranet that we launch applications from, but the Mac cannot find that page when connected to VPN from 192.168.1.x. Same problem.
    Thanks in advance.

    Hi,
    I presume you have split-tunneling activated.
    1. Make sure the 192.168.1.x is on the protected networks and on the MacBook client, disable "Allow local LAN access"
    2. Create a separate group for the Mac users and assgn them a different pool (192.168.100.x )and advertise it in your company to point to the VPN Concentrator.
    3. Use the NAT feature on your VPN concentrator.
    If this helped, please rate.
    Regards,
    Daniel

  • PI 7.11: Cannot connect to server using message server:...

    Hello Guys,
    we make the Application Management for a Customer PI System.
    Scenario:
    - the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
      SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
    - WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
      Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
    Problem:
    Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
    "Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
    In the Details from the Error Message:
    "<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
    Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
    The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
    Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
    Sorry for my bad English
    Best Regards,
    Markus

    Hi Markus,
    did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
    P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented.  There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
    If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
    (This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
    Solution: Establish a connection without any proxy in between.
      E.g.: a terminal server in the same network
    It would be helpful to find more people with the same problem to force a fix from SAP for that.
    If anyone else is having problems with this, please add a comment to this thread.
    Best regards
    Christian

  • Reliable working combination of VPN client and Sidewinder firewall?

    My work's I.T. Dept has deployed a "Sidewinder" VPN firewall with certs at our workplace. All works well with our many remote Windoze clients. The Windoze clients are using a "Greenbow" VPN client.
    They (the I.T. Dept.) were never able to get the built-in OS X VPN client to work with the Sidewinder VPN firewall at all. I don't really have any details of what they tried or why it didn't work and they aren't exactly the friendliest types to us Mac users in the organization so I probably won't be getting any further details in that regard.
    They (the I.T. Dept.) did get VPN Tracker Player v6.2 client to work on the remote Mac clients -- sort of -- but it consistently fails after roughly ten minutes of connection time at IKE renegotiation. They purportedly had a trouble ticket open with, and were working with, Equinux to try to resolve the issue, but after spending a certain amount of time on it, they basically told us Mac users in the organization that they had already spent way too much time on trying to make the Mac VPN client work, so they weren't going to be doing anything further with it, so too bad, so sad for us. And they've got 100% Director support backing up their decision.
    So, the question du jour is, is anyone out there using a VPN client on a Mac and reliably connecting through a "Sidewinder" VPN firewall/server with certs (i.e., no dropped connections after about ten minutes or thereabouts), and if so, what VPN client are using and how did you/do you have it configured?
    Thanks

    (first and last) bump

  • IP Communicator doesn't work with Cisco VPN Client

    Hi,
    Im having problem to connect  IP Communicator (either ver 2 or 7 )whenever using Cisco VPN Client 5.0.06.0160 for windows
    the IPC didn't register to the CUCM
    There's nothing showing on the screen
    but whenever im using  Anyconnect VPN Client, it works perfectly
    The remote side is using ASA5505
    Anyone can help ??
    Thanks

         It's probably an issue with the ASA configuration in your "group-policy attributes".  The "split-tunnel-network-list value" is pointing to an access list without the subnet for the call manager.  While your ssl group-policy for webvpn has a "split-tunnel network-list value" access-list which does contain the subnet for the call manager.
         The other issue could be that your using different ip pools for ipsec and ssl vpn.  The ip pool subnet that you might be giving out for ipsec might not be in your "no nat" acl.
    Jason

  • Tunneling using Cisco VPN Client 4.9

    Hello,
    in recent times I used the Cisco VPN Client 4.7 with no problems:
    1. I installed the software
    2. I started "Internet Connect.app", created a VPN connection (PPTP) with no entries
    3. created a new network connection ("Tunnel to company"), with ETH and VPN (PPTP) enabled
    4. the ethernet interface points at the local router wich is connected to my ISP
    5. DHCP-Client-ID: our.company.de, DNS-Server: no entry, Domain-Names: our.company.de
    6. Proxies: our companies proxies
    7. the VPN (PPTP) interface is configuered as PPP, DNS-Server: our companies server IPs, Domain-Names: no entries, Proxy: no entries
    8. Starting the Cisco VPN Client I configuered an new session, connected, ok
    As said, this was in the old days.
    Now using Cisco VPN Client 4.9 on a MacBookPro (Intel) this works also with one exception:
    I can establish a network connection (ping, smb, AFP, intranet/HTTP) only using the companies fully qualified domain name, e.g.:
    1. ping server1: unable to resolve name
    2. ping server1.our.company.de: works as exspected
    I am using Cisco VPN Client 4.9.00 (0050), Mac OS X 4.8 with all available updates.
    Any help would be appreciated
    Roland

    ...
    trying the same (without the "Internet Config.app" / VPN PPTP) using VPN Tracker works fine. But I don´t want to spend Euro 79.-...
    Roland

  • Airport Extreme 802.11n with Nortel VPN client

    Hello,
    Has anyone had any experience using the Airport Extreme 802.11n) with a PC (sorry, I have both a PC and a Mac)running the Nortel VPN client?
    The new router works perfectly with the Mac but I also need to use the VPN on the PC for certain functions in my work. On my previous router (Dlink DIR625), I had to set a dedicated virtual tunnel to port 9550 to solve this issue. I think this might still be true for the Airport Extreme but I don't see how to do it. Any help would be appreciated. Thanks.

    I had the same problem and an apple apple care tech walked me through it yeterday.
    Call them, they were great.
    JK

  • Time Capsule - Nortel VPN Client

    Has Apple finally addressed the issue(s) with Nortel VPN clients??? I know that this has been an ongoing issue...I lost track of notes...can someone please update me. Thanks!

    I tried for about a week to get my Contivity 4_65.09 client to work thru the Time Capsule to no avail. When I called apple, they refused to offer any help. I have not seen any successful updates from anyone. Returned TC on day 14. I really did like it other than this issue, but sadly, not being able to connect to work is a dealbreaker.

  • XE connection problem after using Cisco AnyConnect Client

    Hello
    I have a rather annoying problem connecting to an XE instance AFTER I have disconnected from a VPN via a Cisco AnyConnect VPN Agent.
    Sequence of operations:
    - start Oracle XE and work normally
    - connect to client's vpn
    - do other stuff
    - DISCONNECT from Client's VPN
    -> unable to connect to XE service any more, unless I reboot
    The problem does not happen with other vpn clients like Cisco VPN Service, Juniper, Checkpoint.
    Details:
    - sqlplus connection WITH service name (eg sqlplus user/pwd@XE): FAILURE with ORA-12170
    - but...sqlplus connection WITHOUT service name (eg sqlplus user/pwd): SUCCESS (weird !)
    - tnsping XE: TNS-12535 error
    - lsnrctl status output (sorry, italian localized)
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 22-GIU-2011 14:19
    :38
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connessione a (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    STATO del LISTENER
    Alias LISTENER
    Versione TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
    ction
    Data di inizio 22-GIU-2011 12:26:15
    Tempo di attivitÓ 0 giorni 1 ore 53 min. 22 sec.
    Livello trace off
    Sicurezza ON: Local OS Authentication
    SNMP OFF
    Servizio predefinito XE
    File di parametri listenerC:\programs\oraclexe\app\oracle\product\10.2.0\server\
    network\admin\listener.ora
    File di log listener C:\programs\oraclexe\app\oracle\product\10.2.0\server\
    network\log\listener.log
    Summary table degli endpoint di ascolto...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=MyPCName)(PORT=8080))(Presentation=HTTP)(Session=RAW))
    Summary table dei servizi...
    Il servizio "CLRExtProc" ha 1 istanze.
    L'istanza "CLRExtProc", stato UNKNOWN, ha 1 handler per questo servizio...
    Il servizio "PLSExtProc" ha 1 istanze.
    L'istanza "PLSExtProc", stato UNKNOWN, ha 1 handler per questo servizio...
    Il servizio "XEXDB" ha 1 istanze.
    L'istanza "xe", stato READY, ha 1 handler per questo servizio...
    Il servizio "XE_XPT" ha 1 istanze.
    L'istanza "xe", stato READY, ha 1 handler per questo servizio...
    Il servizio "xe" ha 1 istanze.
    L'istanza "xe", stato READY, ha 1 handler per questo servizio...
    Environment:
    Win7 Pro SP1
    Oracle XE 10.2.0
    I have stopped the Win firewall and the problem is still there, so it is not a firewall problem
    listener.ora configuration
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\programs\oraclexe\app\oracle\product\10.2.0\server)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = C:\programs\oraclexe\app\oracle\product\10.2.0\server)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (ADDRESS = (PROTOCOL = TCP)(HOST = MyPCName)(PORT = 1521))
    DEFAULT_SERVICE_LISTENER = (XE)
    tnsnames.ora
    XE =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = MyPCName)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = XE)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    Any help ?

    Hi;
    Pelase close this tread as answered and keep update issue at:
    Re: XE connection problem after using Cisco AnyConnect Client
    Regard
    Helios

  • Cannot connect to server using message server: ms://xiidhasoft:50004/P4

    Hi SAP Guru's
    When PISUPER or any any of the enduser is trying to login in the Integration Builder , they are getting error
    Cannot connect to server using message server: ms://xiidhasoft:50004/P4
    I have tryed to search in SDN and got below solution but no success
    1. Exchange Profile of PI - http://host:port/exchangeProfile
    2. Check with the rmi port number.
    3. if rmi port number is empty or any number is present ( check with Tr code: SMICM - services - check for p4 port number - it will be ex: 5<nr>04)
    4. fill the rmi port number as present in the P4.
    OR
    implement note 864268
    I have Netweaver PI 7.1 .
    Please suggest some alternative solution.
    Thanks & Regards
    Vinay Patel

    You may check your local PC Java Network Setting.
    Troubleshooting:
    Probably Javau2122 WebStart does not detect the correct Proxy Settings. In this case please proceed as follows:
    To change the Proxy Settings for Javau2122 Web Start:
    1. Click Start --> Run  and enter javaws. Press button OK.
    2. Control Panel -> Programs ->Java -> Network Settings...
    3. Select Direct Connection to switch off the proxy settings and press button OK.
    If this still does not work, select Use proxy server to set manually the HTTP Proxy and Port.
    Contact your network administrator for the correct settings.

  • Since a I have intalled OS X Lion I cannot connect internet mobile using my ZTE mobile pen

    Since a I have intalled OS X Lion I cannot connect internet mobile using my ZTE mobile pen.

    It sounds like you need updated drivers. They are hard to find for that thing. This is what I found on a cursory search:
    http://studiofourfour.zendesk.com/entries/20305042-mac-os-x-lion-3-zte-usb-broad band-drivers
    You should consider contacting the manufacturer or cell provider that sold you the modem for support.

  • Client Computer cannot connect to server over internet (VPN)

    Hello Guys,
    I am setting up a windows server 2012 Data centre for business purpose. I have installed & configured server with AD DC, DNS, DHCP, IIS, NPS, Routing etc.. I am able to connect client computers which is on the same domain to the server through same router.
    VPN also work fine. But if I try to connect to the server via VPN through a different internet connection it won't connect. Can some one please tell me what I am doing wrong.
    My Network Confg is,
    DHCP IP ADDRESS FROM ISP
    DHCP Disables Router, (Tried with enable)
    Have my own website domain which is not linked with the server.
    NAT not configured.
    Thanks in Advance
    Emmanual.

    Hi Emmanual,
    Thank you for posting in Windows Server Forum.
    Can you ping to the remote server after connecting through VPN?
    Did you find any specific error\event id for your case?
    What’s your client OS version?
    If you are not getting ping successfully then seems there is connection issue through VPN. So for this you can initially check the connection setting with following article.
    You Cannot Connect to the Internet After You Connect to a VPN Server
    http://support.microsoft.com/kb/317025
    There are several reason as client is not getting remotely connected to server. In addition you can checl following article.
    Enabling remote client access over a VPN connection
    http://technet.microsoft.com/en-us/library/cc995159.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Cannot connect to database using the Upgrade Simulation Tool

    I have installed the Upgrade Simulation Tool on my system and when I try to run the tool my system works in the for awhile in the background and creates the _Simulation mdf and ldf files and a .bck file.  After 3 or 4 minutes it gives me an error "Cannot connect to the database".  
    It looks to me like it is connecting to the database because it is creating the files in the SQL Data folder.  I have tried to run it on several databases and get the same results.
    Thank you, Jeff

    Hi,
    You may not have the ability to upgrade it directly.
    He does have the ability.
    When downloading Pl 42, it is cleary marked as "Upgrader", which means it can be used for upgrade (in this case simulation) from a lower version than 2007A
    Patchlevel which are marked as "patch" are suitable only for updating the PL within the very same version of SAP Business One.
    This tool should run under 2007 system I believe.
    The Upgrade Simulation tool was designed in orderto test an upgrade, therefore it can run at a machine where 2005 version is installed. Technically speaking it creates a second SBO-common, which can be used only with the special designed (read only) client of the tool.
    Jeff, you should check access rights of your SQL Data folder.Maybe grant user "Everyone" modifying rights to that folder. In addition you could try to detach a DB and move the related *.mdf and *.ldf to another folder where no access denied rights were applied.
    If using MSSQL 2005 create via ODBC a Native Client connection to the Server, although you might just working locally only.
    Regards
    Mario

  • WRVS4400N - Logging and Email Alerts when I use a VPN client - Firmware bug?

    Hi folks -
    I've got a problem with my WRVS4400N that has been dogging me for a long time now, and I'm finally fed up with the email alerts.
    My wife has a VPN client for her work, on her laptop.  It is nothing fancy, normal IPSec VPN, details on it I can get if needed, but it's just VPN.
    My WRVS4400N is running 1.1.03 firmware, latest on the site.  I have all VPN pass-throughs enabled.  VPN connectivity for the wife works great, no problems that I'm aware of for her functionally.
    The problem is, that I have logging turned on with email alerts.  When my wife uses her VPN connection, I get flooded with alerts from the router with all sorts of goobly goo information.  It's almost like there is a bug in the router firmware that is parsing information incorrectly. 
    Log levels are set to 0,1,2,3.  Email alerts enabled.  DoS threshold is 50, Log Queue is 100, Log Time is 60.  SMTP information for my mail server populated of course, and Local Log enabled.
    Below is a sample of the email body that gets sent.  My wife has been using her VPN connection for about 3 hours tonight, and already I've been flooded with over 1000 emails.
    Here's some body content:
    Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN05 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN07 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENH CID=054619136 Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENv8 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENW9 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENQ1 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN` CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENu CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENf CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENf CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN20 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN43 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENb CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENu CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENH CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN=CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENI CID=054619136 Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENI CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENE CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENE CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=w GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136 Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENQ1 CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN` CID=054619136
    Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 7
    Does anyone have any ideas?  This seems like a code bug to me, but how do I go about reporting to Linksys?
    Of course, I can turn off email alerts, but then that defeats the purpose of the router being able to tell me when something is awry.
    Any help would be appreciated!
    Thanks,
    Jesse T.

    hay,
    Nobody can test this?
    nobody has a 5520?

  • Using 2 VPN clients

    I have an Apani VPN client for work and want to install a CISCO VPN client for another job. When I try to connect using CISCO, I get an error message saying my other VPN is interfering with the connection. I have tried putting CISCO under a different mac user but no luck.

    Hi,
    I'm guessing you need to Make a New Location, Using network locations in Mac OS X ...
    http://docs.info.apple.com/article.html?artnum=106653
    One for each.

Maybe you are looking for

  • Shortdump ASSIGN_TYPE_CONFLICT

    Hi, when i start a DTP (with info source), I get a runtime error (ASSIGN_TYPE_CONFLICT), especially flatfiles DEMOSYSTEM: Netweaver 2004s SPS5 Can anybody help me, please. Thanks. Bernd

  • Printing in Illustrator 5 with a file created in Illustrator 4-crash!

    I have a brand new system running on Snow Leopard (10.6.2). Most of the files I'm working on were created in Creative Suite 4. So when I go to open a file created in a Illustrator 4 program in my new Illustrator 5 program, it crashes when I go to fil

  • All PDF files on my computer open when I try to just open 1 of them with Acrobat Pro 9

    Everytime I try to open a PDF in acrobat pro 9 several other PDF documents open as well (like every single one it can find on my computer). I do not have this problem if I open the file in acrobat 8 pro. Any ideas what I can do to fix this problem? T

  • From Jobs...

    "iPhone now has Maps with location. Webclips. Can customize the home screens. You can SMS multiple people at once."

  • Error - Complex Approval Workflow in OIM

    I am trying to configure a complex workflow in OIM. I have done the following steps to do this : 1. Made the resource a self-requested resource. 2. Created a provisioning task for this resource. 3. Created an approval task with appropriate assignment