Cannot connect to X1 platform

I am continually losing my connection to X1. On two of my TV's a restet seems to solve the problem (although I am very tired of going through this process every week or so). On my other TV, it just will not connect. I have called customer service and gotten no where.

The upstream on your dvr and one of your secondary boxes are way out of spec and would cause the issues you're having. If you can't get the other box to connect ( right now it shows offline) chances are pretty good the signal at that outlet is worse than the other 2. Check your cables, connections, and remove any unnecessary splitters to get your upstream signal back in spec. If you're unable to get anywhere call for a tech to troubleshoot further

Similar Messages

  • BIB-16633 Cannot connect because the database version is incompatible with

    BIB-16633 Cannot connect because the database version is incompatible with Feb 15, 2005 9:28 PM
    Reply
    why is this?
    oracle.dss.connection.common.ConnectionException: BIB-16633 Cannot connect because the database version is incompatible with this BI Beans version.
    at oracle.dss.connection.server.drivers.mdm.MDMConnectionDriverImpl.connect(MDMConnectionDriverImpl.java:147)
    at oracle.dss.connection.server.ConnectionImpl.connect(ConnectionImpl.java:285)
    at oracle.dss.connection.client.Connection.connect(Connection.java:425)
    at oracle.dss.connection.client.Connection.connect(Connection.java:342)
    at oracle.dss.addins.designer.OLAPSource.test(OLAPSource.java:284)
    at oracle.dss.addins.wizard.configFileEditor.OlapPanel.testConnection(OlapPanel.java:244)
    at oracle.dss.addins.wizard.configFileEditor.OlapPanel.btnTest_actionPerformed(OlapPanel.java:378)
    at oracle.dss.addins.wizard.configFileEditor.OlapPanel$3.actionPerformed(OlapPanel.java:120)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
    at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
    at java.awt.Component.processMouseEvent(Component.java:5100)
    at java.awt.Component.processEvent(Component.java:4897)
    at java.awt.Container.processEvent(Container.java:1569)
    at java.awt.Component.dispatchEventImpl(Component.java:3615)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:141)
    at java.awt.Dialog$1.run(Dialog.java:540)
    at java.awt.Dialog.show(Dialog.java:561)
    at java.awt.Component.show(Component.java:1133)
    at java.awt.Component.setVisible(Component.java:1088)
    at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
    at oracle.dss.addins.wizard.configFileEditor.ConfigFileEditorWizard.run(ConfigFileEditorWizard.java:229)
    at oracle.dss.addins.designer.BIDesignerImpl.editConfigFile(BIDesignerImpl.java:1428)
    at oracle.dss.addins.designer.BIDesignerAddin.openBIDesignerSettings(BIDesignerAddin.java:990)
    at oracle.dss.addins.designer.BIDesignerAddin.actionPerformed(BIDesignerAddin.java:807)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
    at javax.swing.AbstractButton.doClick(AbstractButton.java:289)
    at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1113)
    at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(BasicMenuItemUI.java:943)
    at java.awt.Component.processMouseEvent(Component.java:5100)
    at java.awt.Component.processEvent(Component.java:4897)
    at java.awt.Container.processEvent(Container.java:1569)
    at java.awt.Component.dispatchEventImpl(Component.java:3615)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    Lisa Sherriff
    Posts: 137
    OTN Member Since: Jan, 2001
    Re: BIB-16633 Cannot connect because the database version is incompatible w ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 16, 2005 1:32 AM
    Reply
    Hi,
    From the 10.1.2 BI Beans Install Guide it says:
    OracleBI Beans supports data stored in Oracle9i Enterprise Edition or Oracle Database 10g Enterprise Edition. However, only particular releases and patchsets are supported:
    * Oracle9i Release 2 Enterprise Edition, as follows:
    o 9.2.0.6 for all platforms.
    o 9.2.0.5 with the latest OLAP patch for Windows-only.
    * Oracle Database 10g Release 1 Enterprise Edition with the latest OLAP patch.
    From the error message it would appear that the Database is not one of the above.
    Thanks,
    Lisa
    JDev QA
    401488
    Posts: 48
    OTN Member Since: Aug, 2002
    Re: BIB-16633 Cannot connect because the database version is incompatible with ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 18, 2005 8:01 PM
    Reply
    Hi,
    Please note that we have follwing versions of DB up and running:-
    1)Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    2)Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
    With the Partitioning and Real Application Clusters options
    JServer Release 9.2.0.5.0 - Production
    Pls let us know the solution to resolve this problem ASAP.
    Thanks.

    You are not using a supported version of the database. BI Beans/OLAP only support the following database versions:
    10g - 10.1.0.3 with additional OLAP patch
    9i - 9205 with additional OLAP patch
    9i - 9206
    I would suggest that you have not applied all the required database patches to your instance.
    Hope this helps
    Business Intelligence Beans Product Management Team
    Oraclc Corporation

  • TS2706 I cannot connect to my airport (time capsule) from a Windows PC

    Any information on how to connect to an aiport extreme (really the time capsule) from a Windows platform. Have no problem from our Mac's but cannot connect from a windows based platform.  I haven't been able to find any recent posts to help with this problem.

    First off, Archon23, what you want to achieve is possible.  I have access to both my Time Capsule (TC) and the USB drive connected to it, from a Win. 7 and Win. XP machine.
    Here is what I see from the Windows side of things:
         From My Computer - TC USB Drive (Y)
         From Windows HomeNet - Time Capsule:
    Now getting there is the trick.
    One caveat before proceeding:  I am not well versed in Windows Networks, Windows Sharing and Firewall settings so some of the following may not be elegant, may not be absolutely required, and may not be the best way of getting there.  But it is what I did to see both the TC drive and it's attached USB  drive on the Windows side of my network..
    1.) First, I added Airport Utility to the Inbound rules of Win 7 Firewall
    While poking around my Network Sharing and Firewall settings trying to figure this out, I got a Pop-up recommending I do that.  AND I did that. Oh, and while you are at it, make sure you have a Home network established. 
    2.) Next, on a hunch, I installed a USB Wi-Fi Adapter (under $20) to my Win PC, enabled that Wi-Fi connection and disabled my Ethernet connection.  I was getting no where on this matter with my Ethernet connection to a DSL Gateway.  But with a Wi-Fi connection to my AirPort Express Base Station, I made progress.
    3.) Finally, while poking around my Network Sharing Center some more, one by one I started the various network device Setup Wizards in there, and Trouble Shooters, to find the elusive TC/USB devices in question...AND voila, it worked.   And it's stable, been this way for going on two weeks now.
    Good luck.

  • Cannot connect to Database in SQL Developer - TIMEZONE errors

    Cannot connect to any database get the following errors.
    Status : Failure -Test failed: ORA-00604: error occurred at recursive SQL level 1
    ORA-01882: timezone region not found
    Tried change NLS settings to America (currently South Africa) but to no avail.
    My system info:
    About
    Oracle SQL Developer 3.2.20.09
    Version 3.2.20.09
    Build MAIN-09.87
    Copyright © 2005, 2012 Oracle. All Rights Reserved.
    IDE Version: 11.1.1.4.37.59.48
    Product ID: oracle.sqldeveloper
    Product Version: 11.2.0.09.87
    Version
    Component     Version
    =========     =======
    Java(TM) Platform     1.6.0_38
    Oracle IDE     3.2.20.09.87
    Versioning Support     3.2.20.09.87
    Running on Windows 7 with a 64-bit oracle client.

    I managed to find the solution in previous thread
    Please see my error message.

  • Cannot connect to DB2 on XP

    I have a weird problem. I'm using a Type-2 JDBC driver for DB2. My development environment is on XP using VisualAge. On that platform, I cannot connect to the DB2 database. The environment this program runs on is an NT 4.0 machine. On there, the same code works fine.
    The DB2 libs are in c:\sqllib\java and are contained in the zip files db2java.zip and runtime.zip. In both environments, (both DOS cmd line and VAJ) these zip files are in the classpath.
    On XP, the line
    Class.forName("COM.ibm..db2.jdbc.app.DB2Driver");
    does load the class. However, when I go to register the driver I get the error:
    "No suitable driver"
    The alias I am trying to connect to is cataloged on my machine. I can access it through RapidSQL and the command line db2 client. Is it possible that the driver is not compatible with WinXP? Can anyone think of another reason why this would not work on XP but work on NT 4.0.
    Thanks,
    Curt

    Hello,
    I ran into a very similar problem when I upgraded to DB2 V7.2 in that my application could not find a Type 2 driver. I would recommend trying the same application using a Type1 driver just to see if you are running into the same bug I ran into.
    To make the switch to a Type 1 driver go to c:\sqllib\java12 and issue the usejdbc1 command from the command line. You may have to back out of everything to avoid sharing violations. After I did this I was able to execute my application successfully. I am not sure if there is a fixpack available for this problem yet.
    Please report your results.
    Regards,
    Bill

  • Cannot connect when not granting acces to akamaitechnologies!!!

    Hi,
    Since a few days my firewall asks me that I have to grant access to the infamous akamaitechnologies(a194-109-192-7.deploy.akamaitechnologies.con) when starting sqldeveloper. If I refused I cannot connect!!!????. Before I have to grant access to bigip-www-adc.oracle.com (see my earlier post) and I get the same error: "I/O exception. The network adapter cannot establish the connection". vendor code 17002
    STILL NO ANSWER: WHY SHOULD I GRANT ACCESS MY COMPUER TO COMMUNICATE WITH AKAMAITECHNOLOGIES FOR USING SQLDEVELOPER???
    I dont like that external computers poking around in my computer.

    I did not see your earlier thread. It is best to reuse your initial thread and not to open a new one, as I had to go in search for your query and see if there were any other comments on the thread. This is not something from SQL Developer. You should definitely refuse that connection.
    In terms of the I/O exception, can you use SQL*Plus to connect to your database? Are you using a basic connection or tnsnames?
    What release of SQL Developer are you using? What platform? What database? what jdk?
    Sue

  • After a system restart i cannot connect to SAP with SAPGUI.

    After a system restart i cannot connect to SAP with SAPGUI.
    See attached log  "dev_disp" and "dev_w0"
    At the end of this message you can see the comparison between the
    defective system and another working system
    I notice the absence of the "IGS400" process
    Could you please help me ?
    Best regards to everybody.
    "dev_disp" log file tell me : ************************
    trc file: "dev_disp", trc level: 1, release: "640"
    Thu Jun 21 13:21:24 2007
    kernel runs with dp version 132(ext=102) (@(#) DPLIB-INT-VERSION-132)
    length of sys_adm_ext is 312 bytes
    sysno      00
    sid        SVI
    systemid   324 (IBM iSeries with OS400)
    relno      6400
    patchlevel 0
    patchno    147
    intno      20020600
    make:      single threaded, ASCII, 64 bit
    pid        380
    Thu Jun 21 13:21:27 2007
    ***LOG Q00=> DpSapEnvInit, DPStart (00 380) [dpxxdisp.c   1100]
         shared lib "dw_xml.so" version 147 successfully loaded
         shared lib "dw_xtc.so" version 147 successfully loaded
         shared lib "dw_stl.so" version 147 successfully loaded
         shared lib "dw_gui.so" version 147 successfully loaded
         shared lib "dw_mdm.so" version 147 successfully loaded
    MtxInit: -2 0 0
    DpSysAdmExtInit: ABAP is active
    DpIPCInit2: start server >FRASTEST_SVI_00                         <
    DpShMCreate: sizeof(wp_adm)          10712     (824)
    DpShMCreate: sizeof(tm_adm)          3021432     (15032)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpShMCreate: sizeof(comm_adm)          216000     (432)
    DpShMCreate: sizeof(vmc_adm)          0     (448)
    DpShMCreate: sizeof(wall_adm)          (22440/36712/56/104)
    Thu Jun 21 13:21:28 2007
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 700000080000000, size: 3337656)
    DpShMCreate: allocated sys_adm at 700000080000000
    DpShMCreate: allocated wp_adm at 700000080001830
    DpShMCreate: allocated tm_adm_list at 700000080004208
    DpShMCreate: allocated tm_adm at 700000080004230
    DpShMCreate: allocated wp_ca_adm at 7000000802e5ca8
    DpShMCreate: allocated appc_ca_adm at 7000000802ea2f8
    DpShMCreate: allocated comm_adm_list at 7000000802eba68
    DpShMCreate: allocated comm_adm at 7000000802eba80
    DpShMCreate: allocated vmc_adm_list at 700000080320640
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 700000080320668
    DpShMCreate: allocated wall_adm at 700000080320670
    MBUF state OFF
    EmInit: MmSetImplementation( 2 ).
    Thu Jun 21 13:21:29 2007
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation std
    EsIUnamFileMapInit: ES base = 0x7000000d0000000
    EsStdInit: Extended Memory 4096 MB allocated
    <ES> 1023 blocks reserved for free list.
    ES initialized.
    Thu Jun 21 13:22:33 2007
    rdisp/http_min_wait_dia_wp : 1 -> 1
    Thu Jun 21 13:22:35 2007
    ***LOG Q0K=> DpMsAttach, mscon ( FRASTEST) [dpxxdisp.c   10036]
    Thu Jun 21 13:22:36 2007
    DpStartStopMsg: send start message (myname is >FRASTEST_SVI_00                         <)
    DpStartStopMsg: start msg sent
    Thu Jun 21 13:22:47 2007
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Thu Jun 21 13:22:49 2007
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6400, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
    DpMsgAdmin: Set patchno for this platform to 147
    Release check o.K.
    Thu Jun 21 13:39:13 2007
    DpSigInt: caught signal 2
    DpHalt: shutdown server >FRASTEST_SVI_00                         < (normal)
    Thu Jun 21 13:39:14 2007
    ***LOG Q0I=> NiPWrite: writev (32: Broken pipe) [niuxi.c 1140]
    ERROR => MsINiWrite: NiBufSend (rc=NIECONN_BROKEN) [msxxi.c      2455]
    ERROR => MsIModState: MsINiWrite (rc=NIECONN_BROKEN) [msxxi.c      3695]
    MBUF state OFF
    MBUF component DOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Thu Jun 21 13:39:15 2007
    Stop work processes...
    Thu Jun 21 13:40:18 2007
    ERROR => DpWpKill(411, SIGUSR2): kill failed [dpxxtool.c   2462]
    Stop gateway
    Stop icman
    Terminate gui connections
    waiting for termination of work processes
    Thu Jun 21 13:40:19 2007
    waiting for termination of work processes
    Thu Jun 21 13:40:20 2007
    waiting for termination of work processes
    Thu Jun 21 13:40:21 2007
    waiting for termination of work processes
    "dev_w0" log file tell me : ************************
    trc file: "dev_w0", trc level: 1, release: "640"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M
    M sysno      00
    M sid        SVI
    M systemid   324 (IBM iSeries with OS400)
    M relno      6400
    M patchlevel 0
    M patchno    147
    M intno      20020600
    M make:      single threaded, ASCII, 64 bit
    M pid        404
    M
    M 
    M Thu Jun 21 13:22:00 2007
    M  ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 404) [thxxhead.c   1146]
    M  calling db_connect ...
    C  DB4 SQL Reparse Activated
    C 
    C Thu Jun 21 13:22:11 2007
    C  R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
    C  R3INLPGM: RmtExeLib is R3640ASVI
    C 
    C Thu Jun 21 13:22:13 2007
    C  Connection to database done without problems.
    C  -
    C  -
    DbSl EGO Structure
    C  -
    C     SAPSYSTEMNAME               = SVI
    C     Character encoding          = ASCII
    C     process class               = dialog process
    C     workprocess id              = 0
    C     local host                  = FRASTEST
    C     dbhost                      = FRASTEST
    C     rdbname                     =                  
    C     dbname                      = SVIFRASTEST
    C     dblib                       = R3SVIDATA
    C     application server          = DVEBMGS00
    C     Connect type                = LOCAL
    C     pid                         = 404
    C     dbjobname                   = WP00     
    C     dbjobuser                   = SVI00    
    C     dbjobno                     = 025901
    C     wpjobname                   = WP00
    C     wpjobuser                   = SVI00
    C     wpjobno                     = 025901
    C     DB2/400 vers. appl. server  = PASE 4
    C     DB2/400 vers. DB server     = V5R4                           
    C     da_cache_size               = 100
    C     reopen                      = ON
    C     timeout_retry               = 3
    C     ODP threshold               = 800
    C     ODP commit thresh.          = 810
    C     ODP open thresh.            = 850
    C     QAQQINI library             = Default (QUSRSYS)
    C     Alternate QAQQINI library   = Not specified
    C     use_lobs_for_long           = ON
    C     use_lobs_for_short          = OFF
    C     single_execution_threshold  = 2000
    C     single_execution_reuse      = OFF
    C     keep_tmp_SQLpkgs            = OFF
    C     dbsl_trace                  = off
    C     allow_cancel                = OFF
    C     nqe_optimize_method         = O - All I/O (compatibility mode)
    C     query_compl_reval           = O
    C     nte_list_size               = 10
    C  -
    C 
    C Thu Jun 21 13:22:17 2007
    C  SQL monitor started for job
    B 
    B Thu Jun 21 13:22:18 2007
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20070621 132200 FRASTEST       
    M 
    M Thu Jun 21 13:22:37 2007
    M  db_connect o.k.
    M 
    M Thu Jun 21 13:22:38 2007
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    ACTIVE TRACE LEVEL           2
    ACTIVE TRACE COMPONENTS      all, M
    M  -
    C-STACK -
    => 64 bit R/3 Kernel
    => 64 bit OS400 Kernel
    => Heap limit      = unlimited
    => Stack limit     = unlimited
    => Core limit      = unlimited
    => File size limit = unlimited
    => Heap address  = 0x40000000000000009ED34587C2E94220
    => Stack address = 0xffffffffffff3f0
    => Stack low     =  0xfffffffffffdb30
    => Stack high    =  0xffffffffffffa90
    => Stack Trace:
         Unknown at 0x3618
         sleepms() at 0x1000f9324
         SpinLockSemRq1() at 0x1000f926c
         SemRq() at 0x1000fcf6c
         ThIPCInit() at 0x1000ac1a0
         tskh_init() at 0x1000ad704
         tskhstart() at 0x1000c0950
         DpMain() at 0x10175ad2c
         nlsui_main() at 0x10172dee8
    => CPU Registers:
         msr = 0x800000000000f032     iar = 0x0000000000003618
         ctr = 0x0000000000003610      lr = 0x09000000000a2890
         xer = 0x0000000008000000      cr = 0x000000002a404445
         r00 = 0x0000000000000000     r01 = 0x0ffffffffffff3f0
         r02 = 0x00000000000000a4     r03 = 0xffffffffffffffff
         r04 = 0x0000000000000000     r05 = 0x0000000000000000
         r06 = 0x0000000000000000     r07 = 0x0ffffffffffff520
         r08 = 0x0000000000000001     r09 = 0x0000000010108003
         r10 = 0xb00010000c90e000     r11 = 0xb00010000c90ef30
         r12 = 0x0900000000001eb0     r13 = 0x0000000182784a50
         r14 = 0x0000000000000002     r15 = 0x00000001810e6c48
         r16 = 0x0ffffffffffffb28     r17 = 0x000000018001bf20
         r18 = 0x0000000000000003     r19 = 0x0000000000000004
         r20 = 0x0000000180c6de34     r21 = 0x0000000180c6de28
         r22 = 0x000000018004ce60     r23 = 0x0000000180c6e244
         r24 = 0x0000000000000064     r25 = 0x0000000000000158
         r26 = 0x0000000000000158     r27 = 0x0000000000000000
         r28 = 0x0000000000000000     r29 = 0x0fffffffffffffe0
         r30 = 0x09001000a005ec48     r31 = 0x0000000000000000
    Thu Jun 21 13:40:23 2007
    Library   |(SRV)PGM  |Module    |Function/Statement No.
    Thu Jun 21 13:40:24 2007
    |--||--
    QSYS      |QP2USER2  |QP2API    |__Qp2Fork  8
    QSYS      |QP2USER2  |QP2API    |runpase_main__FPi  6
    QSYS      |QP2USER2  |QP2API    |runpase_common__FiPvT2  2
    R3640ASVI |O4PRTLIBC |AS4STACK  |As4Stack_From_PASE  3
    R3640ASVI |O4PRTLIBC |AS4STACK  |As4StackOut  10
    R3640ASVI |O4PRTLIBC |AS4STACK  |_MATINVS2__8O4_StackFv  8
    M  -
    ACTIVE JOBS OF DEFECTIVE SYSTEM
    Opz  Sottosis/Lav  corrente    Tipo  % CPU  Funzione        Stato             
          R3_00         QSYS        SBS     0,0                  DEQW              
            DISP_WORK   SVI00       BCI     5,3  PGM-disp+work   CNDW              
            GWRD        SVI00       BCI    10,9  PGM-gwrd        RUN               
            ICMAN       SVI00       BCI     1,8  PGM-icman       RUN               
            MSG_SERVER  SVI00       BCI     0,0  PGM-MSG_SERVER  SELW              
            RSLGCOLL    SVI00       BCI     0,0  PGM-rslgcoll    SELW              
            RSLGSEND    SVI00       BCI     0,0  PGM-rslgsend    SELW              
            SAPOSCOL    SVI00       BCI     1,0  PGM-SAPOSCOL    RUN               
            SAPSTART    SVI00       BCH     0,0  PGM-sapstart    EVTW   
            WATCHDOG    SVI00       BCI     0,4  PGM-disp+work   SELW              
            WP00        SVI00       BCI     1,0  PGM-disp+work   RUN               
            WP01        SVI00       BCI     1,0  PGM-disp+work   RUN               
            WP02        SVI00       BCI     1,0  PGM-disp+work   RUN               
            WP03        SVI00       BCI     1,1  PGM-disp+work   RUN               
            WP04        SVI00       BCI     0,9  PGM-disp+work   RUN               
            WP05        SVI00       BCI     0,9  PGM-disp+work   RUN               
            WP06        SVI00       BCI     0,8  PGM-disp+work   RUN               
            WP07        SVI00       BCI     0,6  PGM-disp+work   RUN               
            WP08        SVI00       BCI     0,0                  RUN               
    ACTIVE JOBS OF WORKING SYSTEM
          R3_03         QSYS        SBS     0,0                  DEQW              
            DISP_WORK   TST03       BCI     0,0  PGM-disp+work   SELW              
            GWRD        TST03       BCI     0,0  PGM-gwrd        SELW              
            ICMAN       TST03       BCI     0,0  PGM-icman       SELW              
            IGS400      TST03       BCI     0,0  PGM-igswd_mt    THDW              
            IGS400      TST03       BCI     0,0  PGM-igsmux_mt   THDW              
            IGS400      TST03       BCI     0,0  PGM-igspw_mt    THDW              
            IGS400      TST03       BCI     0,0  PGM-igspw_mt    THDW              
            MSG_SERVER  TST03       BCI     0,0  PGM-MSG_SERVER  SELW              
            RSLGSEND    TST03       BCI     0,0  PGM-rslgsend    THDW              
            SAPSTART    TST03       BCH     0,0  PGM-sapstart    EVTW              
            WATCHDOG    TST03       BCI     0,0  PGM-disp+work   SELW              
            WP00        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP01        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP02        TST03       BCI     2,5  PGM-disp+work   RUN               
            WP03        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP04        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP05        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP06        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP07        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP08        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP09        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP10        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP11        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP12        TST03       BCI     0,0  PGM-disp+work   SEMW

    Following your suggestions i got this error message in the log file "dev_w0"
    This process creted also a very big "core" file
    B  ***LOG BY4=> sql error 304    performing FET on table DDNTF      [dbntab#7 @ 10281] [dbntab  1028 1]
    B  ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab  1028 1]
    B  *** ERROR => missing return code handler     
    caller does not handle code 1 from dbntab#7[3098]     
    Here is the complete log:
    trc file: "dev_w0", trc level: 1, release: "640"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M
    M sysno      00
    M sid        SVI
    M systemid   324 (IBM iSeries with OS400)
    M relno      6400
    M patchlevel 0
    M patchno    147
    M intno      20020600
    M make:      single threaded, ASCII, 64 bit
    M pid        317
    M
    M 
    M Wed Aug  1 17:53:03 2007
    M  ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 317) [thxxhead.c   1146]
    M  calling db_connect ...
    C  DB4 SQL Reparse Activated
    C 
    C Wed Aug  1 17:53:05 2007
    C  R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
    C  R3INLPGM: RmtExeLib is R3640ASVI
    C  Connection to database done without problems.
    C  -
    C  -
    DbSl EGO Structure
    C  -
    C     SAPSYSTEMNAME               = SVI
    C     Character encoding          = ASCII
    C     process class               = dialog process
    C     workprocess id              = 0
    C     local host                  = FRASTEST
    C     dbhost                      = FRASTEST
    C     rdbname                     =                  
    C     dbname                      = SVIFRASTEST
    C     dblib                       = R3SVIDATA
    C     application server          = DVEBMGS00
    C     Connect type                = LOCAL
    C     pid                         = 317
    C     dbjobname                   = WP00     
    C     dbjobuser                   = SVI00    
    C     dbjobno                     = 028178
    C     wpjobname                   = WP00
    C     wpjobuser                   = SVI00
    C     wpjobno                     = 028178
    C     DB2/400 vers. appl. server  = PASE 4
    C     DB2/400 vers. DB server     = V5R4                           
    C     da_cache_size               = 100
    C     reopen                      = ON
    C     timeout_retry               = 3
    C     ODP threshold               = 800
    C     ODP commit thresh.          = 810
    C     ODP open thresh.            = 850
    C     QAQQINI library             = Default (QUSRSYS)
    C     Alternate QAQQINI library   = Not specified
    C     use_lobs_for_long           = ON
    C     use_lobs_for_short          = OFF
    C     single_execution_threshold  = 2000
    C     single_execution_reuse      = OFF
    C     keep_tmp_SQLpkgs            = OFF
    C     dbsl_trace                  = off
    C     allow_cancel                = OFF
    C     nqe_optimize_method         = O - All I/O (compatibility mode)
    C     query_compl_reval           = O
    C     nte_list_size               = 10
    C  -
    C 
    C Wed Aug  1 17:53:09 2007
    C  SQL monitor started for job
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20070801 175303 FRASTEST       
    M 
    M Wed Aug  1 17:53:12 2007
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    I 
    I Wed Aug  1 17:53:13 2007
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF               (addr: 700000200000000, size: 4400128)
    M 
    M Wed Aug  1 17:53:14 2007
    M  SHM_ROLL_AREA          (addr: 700000210000000, size: 268435456)
    M 
    M Wed Aug  1 17:53:15 2007
    M  SHM_PAGING_AREA          (addr: 700000220000000, size: 67108864)
    M  SHM_ROLL_ADM               (addr: 700000230000000, size: 2672386)
    M  SHM_PAGING_ADM          (addr: 700000240000000, size: 164896)
    M 
    M Wed Aug  1 17:53:16 2007
    M  ThCreateNoBuffer          allocated 324144 bytes for 1000 entries at 700000250000000
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 7440 bytes (50 server) at 700000260000000
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation std
    X  ES initialized.
    B 
    B Wed Aug  1 17:53:20 2007
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 13, CON_ID = -1
    B 
    B Wed Aug  1 17:53:25 2007
    B  dbtbxbuf: Buffer TABL  (addr: 7000002d0000100, size: 64000000, end: 7000002d3d09100)
    B  dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
    B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
    B  dbtbxbuf: protect_shm = 0, force_checks = 0
    B  dbtbxbuf: tsize_retry = 31427136
    B  ***LOG BB0=> buffer TABL       started with length 64000000   bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
    B 
    B Wed Aug  1 17:53:26 2007
    B  dbtbxbuf: Buffer TABLP (addr: 7000002e0000100, size: 16776192, end: 7000002e0fffd00)
    B  dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
    B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
    B  dbtbxbuf: protect_shm = 0, force_checks = 0
    B  dbtbxbuf: tsize_retry = 8322944
    B  ***LOG BB0=> buffer TABLP      started with length 16776192   bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
    B  dbtbxbuf: Reading TBX statistics:
    B  dbtbxbuf: Opening /usr/sap/SVI/DVEBMGS00/data/tbxnew failed (No such file or directory).
    B  dbtbxbuf: Renaming /usr/sap/SVI/DVEBMGS00/data/tbxnew to /usr/sap/SVI/DVEBMGS00/data/tbxstat failed (No such file or directory).
    B  dbtbxbuf: 110 object entries precreated
    B  Layout of EIBUF buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 360 = 360
    B  2: 13 * 40 = 520
    B  3: 8009 * 40 = 320360
    B  4: 4000 * 160 = 640000
    B  5: 8009 * 8 = 64072
    B  6: 1 * 200 = 200
    B  7: 65 * 8 = 520
    B  8: 319664 * 128 = 40916992
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer EIBUF (addr: 700000300000108, size: 41943040, end: 700000302800108)
    B  ***LOG BB0=> buffer EIBUF      started with length 40960k     bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
    B  Layout of ESM   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 360 = 360
    B  2: 13 * 40 = 520
    B  3: 4001 * 40 = 160040
    B  4: 2000 * 160 = 320000
    B  5: 4001 * 8 = 32008
    B  6: 1 * 200 = 200
    B  7: 65 * 8 = 520
    B  8: 28755 * 128 = 3680640
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer ESM   (addr: 700000310000108, size: 4194304, end: 700000310400108)
    B  ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
    B  Layout of CUA   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 360 = 360
    B  2: 13 * 40 = 520
    B  3: 16411 * 40 = 656440
    B  4: 8191 * 160 = 1310560
    B  5: 16411 * 8 = 131288
    B  6: 1 * 200 = 200
    B  7: 193 * 8 = 1544
    B  8: 57325 * 256 = 14675200
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer CUA   (addr: 700000320000108, size: 16776192, end: 700000320fffd08)
    B  ***LOG BB0=> buffer CUA        started with length 16383k     bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
    B  Layout of OTR   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 360 = 360
    B  2: 13 * 40 = 520
    B  3: 4001 * 40 = 160040
    B  4: 2000 * 160 = 320000
    B  5: 4001 * 8 = 32008
    B  6: 1 * 200 = 200
    B  7: 81 * 8 = 648
    B  8: 28754 * 128 = 3680512
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B 
    B Wed Aug  1 17:53:27 2007
    B  dbexpbuf: Buffer OTR   (addr: 700000330000108, size: 4194304, end: 700000330400108)
    B  ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
    B  ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf#2 @ 2212] [dbcalbuf2212 ]
    C 
    C Wed Aug  1 17:53:29 2007
    C  *** ERROR => Error 304 in function db_fetch
    [dbsldb4.cpp  9041]
    C  === DBSL Begin of SQL request after execution ===
    C  === DBSL SQLP0400 ===
    C  Function              5
    C  Package               DDNTFIH             Library               R3SVIA2062
    C  Main_Pgm                                  Main_Lib                                 
    C  Statement_Name        "Wx3AAADpDB"        Cursor_Name           "CADDNTF16461"     
    C  Open_Options          x80                 Clause_For_Describe   N
    C  Commitment_Control    C
    C  Date_Format           USA                 Date_Separator        /
    C  Time_Format           USA                 Time_Separator        :
    C  Naming_Option         SYS                 Decimal_Point         .
    C  Blocking_Factor       1                   Scrollable_Option     0                  
    C  Position_Option       0                   Relative_Record       0                  
    C  Rows_To_Insert        0                   Direct_Map            N
    C  Reuse_DA              N                   Name_Check            Y
    C  Use_Ptrs              0                   With_Hold             N
    C  Close_File_Name                           Close_Library_Name    *THRESHOLD         
    C  Reopen                0                   Use_Perf              1
    C  Query_Compl. (Reval)  !                   Statement_Text_CCSID  819
    C  Sort_Sequence_Table   *JOB                Sort_Sequence_Library *LIBL              
    C  Language_ID           *JOB                Allow_Copy_Data       S                  
    C  Allow_Blocking        L
    C  === DBSL SQLDA ===
    C  sqldaid: SQLDA 2 , sqldabc: 816, sqln: 10, sqld: 4
    C  === TRACE VAR 0 ===
    C  sqlvar: 0, sqtype 469, sqllen 30, sqlname.data 13488
    C  sqlind: 0
    C  sqlname (hex):
    C  0008000034B00000  0000000000000000  0000000000000000  0000000000000000 
    C  sqldata row=0 (hex):
    C  005400430041004C  0053002000200020  0020002000200020  0020002000200020 
    C  0020002000200020  0020002000200020  0020002000200020  00200020
    C  === TRACE VAR 1 ===
    C  sqlvar: 1, sqtype 501, sqllen 2, sqlname.data 0
    C  sqlind: -2
    C  sqlname (hex):
    C  0000000000000000  0000000000000000  0000000000000000  0000000000000000 
    C  sqldata row=0 (hex):
    C  0000
    C  === TRACE VAR 2 ===
    C  sqlvar: 2, sqtype 497, sqllen 4, sqlname.data 0
    C  sqlind: -2
    C  sqlname (hex):
    C  0000000000000000  0000000000000000  0000000000000000  0000000000000000 
    C  sqldata row=0 (hex):
    C  00000031
    C  === TRACE VAR 3 ===
    C  sqlvar: 3, sqtype 405, sqllonglen 32700
    C  sqldatalen NULL
    C  sqlind: 0
    C  sqlname (hex):
    C  00080000FFFF0000  0000000000000000  0000000000000000  0000000000000000 
    C  sqldata row=0 (hex):
    C  0000028742000007  4100000000010000  0000280001000000  0100010000004944 
    C  0000000000000000  0000000000000000  0000000000000000  00000000004B4142 
    C  === DBSL errc ===
    C  errc: OK
    C  === DBSL sqlca ===
    C  sqlcode: 304
    C  sqlerrml: 68, sqlerrmc:
    C  00035CD540404040  4040404040404040  4040404040404040  4040404040404040 
    C  4040404040404040  4040404040404040  4040404040404040  4040404040404040 
    C  40400006
    B  ***LOG BY4=> sql error 304    performing FET on table DDNTF      [dbntab#7 @ 10281] [dbntab  1028 1]
    B  ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab  1028 1]
    B  *** ERROR => missing return code handler     
    caller does not handle code 1 from dbntab#7[3098]     
    ==> calling sap_dext to abort transaction
    [dbeh.c       93]
    M  -
    C-STACK -
    => 64 bit R/3 Kernel
    => 64 bit OS400 Kernel
    => Heap limit      = unlimited
    => Stack limit     = unlimited
    => Core limit      = unlimited
    => File size limit = unlimited
    => Heap address  = 0x40000000000000009E570787C2ED4260
    => Stack address = 0xfffffffffffd6f0
    => Stack low     =  0xfffffffffffd6f0
    => Stack high    =  0xffffffffffffa90
    => Stack Trace:
         AixStack() at 0x10008d040
         CTrcStack2() at 0x10008d138
         ThControl() at 0x1006551a4
         dyThControl() at 0x1003ab070
         dextIntern() at 0x1003aa06c
         sap_dext() at 0x1003aff24
         dbeh_exit() at 0x100416924
         db_ntab() at 0x10039d48c
         read_ntab() at 0x101512474
         db_cbufload() at 0x10150f40c
         reset_handling() at 0x101512f00
         init_shm_and_load_cals() at 0x10151394c
         db_cbufinst() at 0x101514c48
         db_calinit() at 0x1005ae8bc
         db_init() at 0x1001c7ae0
         ThCallHooks() at 0x1000c3654
         ThIPCInit() at 0x1000ac574
         tskh_init() at 0x1000ad704
         tskhstart() at 0x1000c0950
         DpMain() at 0x10175ad2c
         nlsui_main() at 0x10172dee8
    Wed Aug  1 17:53:29 2007
    Library   |(SRV)PGM  |Module    |Function/Statement No.
    |--||--
    QSYS      |QP2USER2  |QP2API    |__Qp2Fork  8
    QSYS      |QP2USER2  |QP2API    |runpase_main__FPi  6
    QSYS      |QP2USER2  |QP2API    |runpase_common__FiPvT2  2
    R3640ASVI |O4PRTLIBC |AS4STACK  |As4Stack_From_PASE  3
    R3640ASVI |O4PRTLIBC |AS4STACK  |As4StackOut  10
    R3640ASVI |O4PRTLIBC |AS4STACK  |_MATINVS2__8O4_StackFv  8
    M  -
    M  ***LOG R1B=> ThControl, sap_dext-call (00 ) [thxxdynp.c   355]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThControl: illegal sap_dext call !!! (step 1, th_errno 5, action 1, level 1) [thxxhead.c   9564]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M  Entering ThSetStatError
    M  Entering ThReadDetachMode
    M  ThISend: still inside critical section semaphore ?

  • Cannot connect between a Mac Pro (late 2013) and a MBP and vice versa

    Cannot connect to Macbook Pro from Mac Pro late 2013. I have tried via ethernet and wifi. I can screen share either way. I have tried to connect to other MBP's on the same network with no luck. I try and connect as a registered user, as I usually do, with no luck. When I enter the Username and then Password the box vibrates as if the details are incorrect, they are definitely correct however.
    I have no firewall on. Both devices are using the most recent OS.
    Thanks in advance
    Jeff

    Hi Grant, Here is the Console system log. Tried to connect to Macbook Pro at 15:46:30
    Mar 22 15:44:28 Jeffs-Mac-Pro com.apple.xpc.launchd[1] (com.apple.preference.datetime.remoteservice[744]): Service exited due to signal: Killed: 9
    Mar 22 15:44:38 Jeffs-Mac-Pro kernel[0]: hfs: mounted Time Machine Backups on device disk2s2
    Mar 22 15:44:40 Jeffs-Mac-Pro com.apple.backupd[736]: Disk image /Volumes/Data/Jeff’s Mac Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
    Mar 22 15:44:40 Jeffs-Mac-Pro mds[35]: (Volume.Error:880) Root store set to FSOnly with matching create! (loaded:1)
    Mar 22 15:44:41 Jeffs-Mac-Pro com.apple.backupd[736]: Backing up to /dev/disk2s2: /Volumes/Time Machine Backups/Backups.backupdb
    Mar 22 15:45:27 Jeffs-Mac-Pro com.apple.backupd[736]: Will copy (72.8 MB) from Jeff Mac Pro HD
    Mar 22 15:45:27 Jeffs-Mac-Pro com.apple.backupd[736]: Found 973 files (72.8 MB) needing backup
    Mar 22 15:45:27 Jeffs-Mac-Pro com.apple.backupd[736]: 1.56 GB required (including padding), 232.28 GB available
    Mar 22 15:45:48 Jeffs-Mac-Pro NetAuthSysAgent[773]: NAHSelectionAcquireCredential complete: iakerb A88A5E19-89A1-8FEF-EE42-8F065FC94669 - ***@mac.com: GSSCred: 0x7ffa296262f0 <MC: iakerb com.apple.idms.appleid.prd.4f7466316e4d737570647351515953457261382b32773d3d@WEL LKNOWN:COM.APPLE.LKDC>
    Mar 22 15:46:41 Jeffs-Mac-Pro NetAuthSysAgent[773]: NAHSelectionAcquireCredential complete: iakerb A88A5E19-89A1-8FEF-EE42-8F065FC94669 - ***@mac.com: GSSCred: 0x7ffa29432780 <MC: iakerb com.apple.idms.appleid.prd.4f7466316e4d737570647351515953457261382b32773d3d@WEL LKNOWN:COM.APPLE.LKDC>
    Mar 22 15:47:04 Jeffs-Mac-Pro Console[781]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
    Mar 22 15:47:17 Jeffs-Mac-Pro com.apple.xpc.launchd[1] (com.apple.PubSub.Agent[784]): Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.pubsub.ipc
    Mar 22 15:47:17 Jeffs-Mac-Pro com.apple.xpc.launchd[1] (com.apple.PubSub.Agent[784]): Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.pubsub.notification
    Mar 22 15:47:36 Jeffs-Mac-Pro com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
    Mar 22 15:47:56 Jeffs-Mac-Pro Dock[286]: void CGSShmemReleaseMappedMemory(CGSShmemID): failed to find shmem ID 787.

  • E7-00: Cannot connect to Facebook with Social Apps...

    My setup:
    Nokia E7-00 PR1.1
    SW version: 014.002
    Social Apps 1.3.215
    Dear all,
    with my Nokia E7-00 I cannot connect via the newest version of Social Apps with Facebook. Every time I try to enter my details for my facebook account, the program returns "login or password incorrect" (correct wording in English unknow to me as I use the German version).
    But, my password is correct. I am sure about this because every time I try to login with Social Apps, I receive an email from Facebook saying "someone logged into Facebook via Ovi by Nokia from an unknown device".
    Further interesting issue: If I enter the details for another Facebook account owned by my wife, I can connect without any problem.
    That means to me that my specific account (a pretty old one (5 years)) seems to be not the right one for Nokia's Social App.
    With my Android phone I can use the built-in Facebook app without any problem.
    Any ideas as to what might cause this? Re- and re-re-installing the Social App does not help.
    Thanks for any advice!
    FranzFrank

    Solved: /t5/Nseries-and-Symbian-Smartphones/N8-Trying-to-c​onnect-to-Facebook-but-can-t-log-in-to-nokia/m-p/1​...
    Thanks to the user Wiseorfool, his solution is:
    "12-Jul-2011 03:29 AM
    I found the solution for this problem.
    The application platform should be enabled in the facebook account as Ovi by Nokia is one of them.
    I had it disabled for reducing spams.
    In your Facebook account, Go to
    Account
    Privacy Settings
    Edit your Settings under "Apps and Websites" at lower left corner
    Click Turn on all platform apps.
    Then your facebook will login under Social Networking Client provided by Nokia without "Invalid username or password. Tip. Password is case sensitive."
    I created a new facebook account and it logged in the very first time and i knew it must have been the account security or application platform. The latter was the one. <
    Happy Networking!!!"
    Enjoy it

  • TS1368 My wifi works fine and I can access the store fine, but when I try to install an app, I get the message "cannot connect to iTunes store"

    My wifi works fine and I can access the store fine, but when I try to install an app, I get the message "cannot connect to iTunes store"

    I am guessing there is an issue with the store right now considering so many people are having the same problem on different platforms. I can't access it with my iPod Touch 4th Gen, yet my wifi is working and I can access the internet using other apps, but when I go to update a couple of apps from the iPod, I get the same error message after I try to sign in to the store.

  • Macbook Pro Cannot Connect to SMTP

    I am running a 2010 MacBook Pro with OS X 10.6.8.  I use Mac Mail app to send and receive e-mail.  Since Thursday 27th Dec 2012 I have been unable to send e-mail.  I get the grey spinning wheel until the following error message appears:
    The SMTP connection to server “mail.(mydomain).co.uk” failed.
    My outgoing mail server is currently showing as offline.  In fact I have 2 e-mail accounts and both are showing as offline.  No problem receiving mail.  Connection doctor connects fine to incoming mail, but not outgoing.
    I have tried the following (plus other things) without any success:
    Checked all the details, passwords etc
    Changed ports from 25 to 465 and 587
    Checked my IP address - it is not blacklisted
    Removed and re-added e-mail account
    Telnet port 25 - it is not blocked, but appeared to successfully connect (from what I understood from checking www)
    Temporarily disabled firewall
    Re-installed Mac app
    Rebuilt mailbox
    Repaired disk permissions
    Used the repair disk utility
    Deselected SSL and changed various options within "Edit SMTP server list"
    Reset the keychain
    Tried updating software but it says no update available.
    Re-instated an old Accounts.plist (and one other file which I forget, something like com.apple.mail) from time capsule.
    I then set up a hotmail account on Mail app but had exactly the same problem, ie cannot connect with SMTP server.
    However, I set up my e-mail account on my wife's iPad with the same details and there was no problem at all, e-mail sent just fine as it does from my iPhone.  So the issue has to be with my Macbook, right?  Can anyone help before I go and spent £1250 on a new Macbook?  I'm sure I'm missing something obvious.  Thanks in advance for any advice.

    Just FYI, I've had the same problem for months now. I have been accessing my hotmail via the web, but decided to try the OS X Mail app.  I could get emails into the account with no problem but couldn't send.  I read all the blog and support entries and have tried everything they recommended, like changing my computer name to one word, without success.  Then last night, it just so happened that my broadband provider had to change out my wireless modem.  As soon as he plugged in the new one, some emails that had been in my outbasket for a month went through instantly and all of a sudden my Mail, both incoming and outgoing now work.  So I think people need to look at their router settings for the a solution to the problem. 

  • I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Cannot connect to other computers on network

    We have a small office network with 7 macs on it. 5 wired 2 laptops with Airport Extreme.
    We have an 8 port switch where the 5 desktops and the airport connect. When I am on a laptop I cannot connect to any of the desktops. It does not even see them (and same with desktop to laptop) What do I need to do to share these two on the airport

    Configure the AirPort Extreme base station (AEBS) so that it the option to distribute IP addresses is DISABLED. That will place the wireless and wired computers on the same subnet.

  • PI 7.11: Cannot connect to server using message server:...

    Hello Guys,
    we make the Application Management for a Customer PI System.
    Scenario:
    - the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
      SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
    - WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
      Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
    Problem:
    Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
    "Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
    In the Details from the Error Message:
    "<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
    Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
    The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
    Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
    Sorry for my bad English
    Best Regards,
    Markus

    Hi Markus,
    did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
    P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented.  There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
    If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
    (This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
    Solution: Establish a connection without any proxy in between.
      E.g.: a terminal server in the same network
    It would be helpful to find more people with the same problem to force a fix from SAP for that.
    If anyone else is having problems with this, please add a comment to this thread.
    Best regards
    Christian

  • Exchange active sync cannot connect to server after migration mailbox user from exchange 2007 to exchange 2013 coexistence

    Hello, everyone, my name is rafl
    I have a problem with exchange 2013 active sync.
    I have installed exchange 2013 coexistence with legacy exchange 2007, I have to migrate user mailboxes: [email protected] from exchange 2007 to exchange 2013.
    but any problem with active sync connection on the mobile device after moving mailbox user. I reconfigure the exchange ActiveSync external connection domain (latest.domain.com) on mobile device replacing legacy exchange ActiveSync external connection domain
    (legacy.domain.com)
    the process of moving mailboxes successfully without error.
    Access OWA for exchange 2007 and exchange 2013 is running normally
    access mail from Outlook running normally
    Certificate request has been installed and has no problem with it
    The OWA virtual directory is configured for internal and external connections and different from the legacy exchange
    The autodiscover virtual directory is configured for internal and external connections and different from the legacy exchange
    ActiveSync virtual directory is configured for internal and external connections and different from the legacy exchange
    user mailboxes are still on exchange 2007 is not problematic.
    only problem with Exchange Active Sync on mobile devices, where I set up an email with android, iphone, windows phone. the error message: cannot connect to the server.
    but, if I create a new user and create user mailboxes directly in exchange server 2013, ActiveSync can run without error on mobile device, access through OWA, MsOutlook, Outlook Anywhere also run normally.
    only the results of user migration from exchange 2007 to exchange 2013 which is troubled with exchange ActiveSync connection.
    any ideas for this problem, and what should I check on the exchange server ..?

    i have run the activesync test connectivity and get some error :
    Testing TCP port 443 on host domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 3091 ms.
    Testing TCP port 443 on host autodiscover.domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 21072 ms.
    Testing TCP port 80 on host autodiscover.domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 21049 ms.
    I have allowed access to port 443 (https) and 80 (http) on the firewall and re-run testconnectivity, but still with the same results. if I enable active sync for users who created directly in Exch 2013 there is no problem with the ActiveSync, just a problem
    for users who moved from Exch 2007 to Exch 2013. @Android, iPhone, and Blackberry the error message "cannot connect to the server"

Maybe you are looking for

  • ORA-01403: no data found   when displaying a value from an   array

    I have a very simple pl/sql procedure like below which gives an error SQL> exec p_ks2; BEGIN p_ks2; END; ERROR at line 1: ORA-01403: no data found ORA-06512: at "KINASE.P_KS2", line 21 ORA-06512: at line 1 if i uncomment the for loop the procedure wo

  • Updating my Apple TV Software

    I am frustrated. Unable to update the software on my Apple TV. The progress bar never moves and the little circle goes round and round. I have tried restart several times and it doesn't make a difference.

  • An error has occurred during report processing. (rsProcessingAborted).. Query execution failed for data set

    Hi All, I'm facing a strange problem.. I've developed few reports. they are working fine in develop environment. after successfull testing they were published on web. in web version, all reports are executing for first time.. if I change any of param

  • In migo transaction mb_migo_badi  problem

    Dear ,       In migo  i have created one implementation for mb_migo_badi  badi  and in this implementation    i am call the functional module j_1iex_fill_excise_items by passing mseg data and document date(22.dec.2009), and this function module calls

  • Oracle Express Performance

    Hi, We are using Oracle Express 6.3.2 & Oracle 8.1.5 for a decision support system that we are building. We are using a server with 2GB RAM, Dual CPU( 550MHz) along with more than 100 GB HDD.The OS being used is Windows NT enterprise edition server 4