Cannot connect using new modem
My sister spilled water on my modem so I dug up this older Westell Model 2200 modem which works fine with my desktop. However, when I plug the modem to the router, I don't get any internet signal anymore. I tried reconnecting all wires, rebooted everything.
Also when I try to hit up the router's web based setup, it leads me to the Modem's intead when I type in 192.168.1.1
When I try running ipconfig, the windows pops up for a split second and then disappears.
HELP PLEASE!
Message Edited by fobsternd on 08-27-2008 08:08 PM
Reset the router for few seconds ..... after reset .... try this settings .....
Access the setup page of the router by launching an
Browser and type on the address bar, 192.168.1.1 and press enter. When
it prompts for the username and password, leave the username field
empty and provide password as "admin" (Without quotes)
click on ok.
On the main setup page the ""Internet Connection Type"" should be
on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
button.
Now click on the sub tab ""MAC address clone"".
- Click on enable
Click Clone & click save settings
Check WAN Ip on Status page of router ....
If getting Valid Ip .... try going online
If you are getting Ip - 192.168.1.X ...change the LAN Ip to 192.168.2.1 ....Power cycle for 3-4 minutes ...
Try going online
If still not working ...use Internet Connection type as PPPOE .... Use Username & Password provided by Service Provider ....
Click save settings....
Look for WAN IP address again under status page ....
Similar Messages
-
New gmail account on iPhone cannot connect using SSL
Hi,
I was having problems accessing the gmail server on my iphone so i deleted the account settings on the iphone and am creating a new one. However, the iphone tells me that it cannot connect using SSL. Has anyone had a similar problem? I don't want to setup the account without this basic security.Hey milos321,
I'm not sure what caused the issue. I believe account may have been automatically locked because abnormal activity.
You can find more detailed information here:
http://mail.google.com/support/bin/answer.py?answer=61805
http://mail.google.com/support/
Jason -
F4580 and can't connect to new modem/router
This printer was working ok with the old router but won't connect with new modem/router.
Yup, this is expected. You will have to re-install the printer. Get the latest software for your printer from the "Support & Drivers" link at the top of this page, run the installation and choose "Wireless" or "Network" when it asks. You will have to temporarily use a USB cable to communicate with the printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
HT201320 CANNOT CONNECT USING SLL
I have a new Ipad 3rd generation, and I cannot setup my verizon email account on ADD ACCOUNT, does anyone know how to proceed? I am receiving the message "cannot connect using SSL" - My ipad is connected to AT&T for wifi service.
Thanks,
It's just Ducky2UGmail accounts can be set up as either IMAP or POP. Each refers to the email protocol. POP is the older of the two and is typically a simple mail delivery with minimal interaction with the server. It pretty much sends the email to your client device and accepts outgoing for delivery processing. IMAP includes a synchronized folder structure and usually an email tagging/classification setup to allow for for flexible management of the the account through the client device. That's a bit of a simplistic description, but should give you an idea.
For anyone using the same account on multiple devices, IMAP is generally the preferred type. -
Cannot connect using webserviceclient+ssl.jar
Hello!
I installed Verisign test certificate on my server and I am able to connect
to the server using Web Service client with JSSE adapter class. Funnily
enough, I cannot connect using WebLogic SSL library, I get an exception.
Could someone help me understand, why I cannot connect using WebLogic SSL
implementation?
To connect using JSSE I use following system properties:
java^
-classpath
.;abcconnect-client.jar;webserviceclient.jar;..\lib\jcert.jar;..\lib\jnet.ja
r;..\lib\jsse.jar;^
-Dweblogic.webservice.client.ssl.adapterclass=com.xxx.yyy.webservice.ssl.AB
CJSSEAdapter^
-Djavax.net.ssl.trustStore=abc.keystore^
-Djava.protocol.handler.pkgs=com.sun.net.ssl.internal.www.protocol^
Client https://MyServer:7002/webservice/ABCConnectService?WSDL
where abcconnect-client.jar is the client jar file, and abc.keystore
contains getcacert.cer root CA, which I downloaded from Verisign from this
page: https://digitalid.verisign.com/server/trial/trialStep4.htm,
ABCJSSEAdapter is the adapter class, implementing SSLAdapter. JSSE test
works fine.
To connect using WebLogic SSL implementation I use following system
properties:
java^
-classpath .;abcconnect-client.jar;webserviceclient+ssl.jar;^
-Dweblogic.webservice.client.ssl.trustedcertfile=getcacert.cer^
-Dweblogic.webservice.client.ssl.strictcertchecking=false^
-Dweblogic.webservice.security.verbose=true^
-Dweblogic.webservice.client.verbose=true^
-Dbea.home=.^
-Djava.protocol.handler.pkgs=com.certicom.net.ssl^
Client https://MyServer:7002/webservice/ABCConnectService?WSDL
I converted binary format of the certificate to PEM, but it did not help.
I am getting this exception:
[BaseWLSSLAdapter] : SSLAdapter verbose output enabled
[BaseWLSSLAdapter] : Strict cert checking disabled by default
[BaseWLSSLAdapter] : Trusted certificates will be loaded from getcacert.cer
[BaseWLSSLAdapter] : Loaded local trusted certificates from
java.io.FileInputStream@73a7ab
[BaseWLSSLAdapter] : Disabling strict checking on adapter
weblogic.webservice.client.WLSSLAdapter@4faf8
[BaseWLSSLAdapter] : Set TrustManager to
weblogic.webservice.client.BaseWLSSLAdapter$NullTrustManager@78c6df
[WLSSLAdapter] : Set HostnameVerifier to
weblogic.webservice.client.WLSSLAdapter$NullVerifier@4ac00c
[BaseWLSSLAdapter] : Loaded local trusted certificates from
java.io.FileInputStream@57c2bd
[BaseWLSSLAdapter] : Disabling strict checking on adapter
weblogic.webservice.client.WLSSLAdapter@323210
[BaseWLSSLAdapter] : Set TrustManager to
weblogic.webservice.client.BaseWLSSLAdapter$NullTrustManager@74f44a
[WLSSLAdapter] : Set HostnameVerifier to
weblogic.webservice.client.WLSSLAdapter$NullVerifier@4ac00c
[BaseWLSSLAdapter] : Got new socketfactory
javax.net.ssl.impl.SSLSocketFactoryImpl@18c56d
[WLSSLAdapter] :
openConnection(https://MyServer:7002/webservice/ABCConnectService?WSDL)
returning
weblogic.webservice.client.https.HttpsURLConnection:https://MyServer:7002/we
bservice/ABCConnectService?WSDL
[WLSSLAdapter] : -- using HostnameVerifier
weblogic.webservice.client.WLSSLAdapter$NullVerifier@4ac00c
[WLSSLAdapter] : -- loaded certs from getcacert.cer
java.io.IOException: Write Channel Closed, possible SSL handshaking or trust
failure
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at
com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireAlertSent(Unknown
Source)
at
com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at
com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at
com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Un
known Source)
at
com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(U
nknown Source)
at com.certicom.tls.record.ReadHandler.interpretContent(Unknown
Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at
com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown
Source)
at
com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown
Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.net.ssl.HttpsClient.doHandshake(Unknown Source)
at
com.certicom.net.ssl.internal.HttpURLConnection.getInputStream(Unknown
Source)
at
weblogic.webservice.client.https.HttpsURLConnection.getInputStream(HttpsURLC
onnection.java:216)
at
weblogic.webservice.tools.wsdlp.DefinitionFactory.createDefinition(Definitio
nFactory.java:71)
at
weblogic.webservice.tools.wsdlp.WSDLParser.<init>(WSDLParser.java:62)
at
weblogic.webservice.WebServiceFactory.createFromWSDL(WebServiceFactory.java:
106)
at
weblogic.webservice.WebServiceFactory.createFromWSDL(WebServiceFactory.java:
82)
at
weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:67)
at Client.main(Client.java:136)Michael,
I guess the getcacert.cer, which is on the client side, should have the
server's certificate followed by the root CA certificate in .pem format.
I have it working with this format.
Could you please try this out and let us know.
Regards,
Anurag
"Michael Jouravlev" <[email protected]> wrote in message
news:[email protected]...
Hello!
I installed Verisign test certificate on my server and I am able toconnect
to the server using Web Service client with JSSE adapter class. Funnily
enough, I cannot connect using WebLogic SSL library, I get an exception.
Could someone help me understand, why I cannot connect using WebLogic SSL
implementation?
To connect using JSSE I use following system properties:
java^
-classpath
.;abcconnect-client.jar;webserviceclient.jar;..\lib\jcert.jar;..\lib\jnet.ja
r;..\lib\jsse.jar;^
-Dweblogic.webservice.client.ssl.adapterclass=com.xxx.yyy.webservice.ssl.AB
CJSSEAdapter^
-Djavax.net.ssl.trustStore=abc.keystore^
-Djava.protocol.handler.pkgs=com.sun.net.ssl.internal.www.protocol^
Client https://MyServer:7002/webservice/ABCConnectService?WSDL
where abcconnect-client.jar is the client jar file, and abc.keystore
contains getcacert.cer root CA, which I downloaded from Verisign from this
page: https://digitalid.verisign.com/server/trial/trialStep4.htm,
ABCJSSEAdapter is the adapter class, implementing SSLAdapter. JSSE test
works fine.
To connect using WebLogic SSL implementation I use following system
properties:
java^
-classpath .;abcconnect-client.jar;webserviceclient+ssl.jar;^
-Dweblogic.webservice.client.ssl.trustedcertfile=getcacert.cer^
-Dweblogic.webservice.client.ssl.strictcertchecking=false^
-Dweblogic.webservice.security.verbose=true^
-Dweblogic.webservice.client.verbose=true^
-Dbea.home=.^
-Djava.protocol.handler.pkgs=com.certicom.net.ssl^
Client https://MyServer:7002/webservice/ABCConnectService?WSDL
I converted binary format of the certificate to PEM, but it did not help.
I am getting this exception:
[BaseWLSSLAdapter] : SSLAdapter verbose output enabled
[BaseWLSSLAdapter] : Strict cert checking disabled by default
[BaseWLSSLAdapter] : Trusted certificates will be loaded fromgetcacert.cer
[BaseWLSSLAdapter] : Loaded local trusted certificates from
java.io.FileInputStream@73a7ab
[BaseWLSSLAdapter] : Disabling strict checking on adapter
weblogic.webservice.client.WLSSLAdapter@4faf8
[BaseWLSSLAdapter] : Set TrustManager to
weblogic.webservice.client.BaseWLSSLAdapter$NullTrustManager@78c6df
[WLSSLAdapter] : Set HostnameVerifier to
weblogic.webservice.client.WLSSLAdapter$NullVerifier@4ac00c
[BaseWLSSLAdapter] : Loaded local trusted certificates from
java.io.FileInputStream@57c2bd
[BaseWLSSLAdapter] : Disabling strict checking on adapter
weblogic.webservice.client.WLSSLAdapter@323210
[BaseWLSSLAdapter] : Set TrustManager to
weblogic.webservice.client.BaseWLSSLAdapter$NullTrustManager@74f44a
[WLSSLAdapter] : Set HostnameVerifier to
weblogic.webservice.client.WLSSLAdapter$NullVerifier@4ac00c
[BaseWLSSLAdapter] : Got new socketfactory
javax.net.ssl.impl.SSLSocketFactoryImpl@18c56d
[WLSSLAdapter] :
openConnection(https://MyServer:7002/webservice/ABCConnectService?WSDL)
returning
weblogic.webservice.client.https.HttpsURLConnection:https://MyServer:7002/we
bservice/ABCConnectService?WSDL
[WLSSLAdapter] : -- using HostnameVerifier
weblogic.webservice.client.WLSSLAdapter$NullVerifier@4ac00c
[WLSSLAdapter] : -- loaded certs from getcacert.cer
java.io.IOException: Write Channel Closed, possible SSL handshaking ortrust
failure
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at
com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireAlertSent(Unknown
Source)
at
com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at
com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(UnknownSource)
at
com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Un
known Source)
at
com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(U
nknown Source)
at com.certicom.tls.record.ReadHandler.interpretContent(Unknown
Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at
com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown
Source)
at
com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown
Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.net.ssl.HttpsClient.doHandshake(Unknown Source)
at
com.certicom.net.ssl.internal.HttpURLConnection.getInputStream(Unknown
Source)
at
weblogic.webservice.client.https.HttpsURLConnection.getInputStream(HttpsURLC
onnection.java:216)
at
weblogic.webservice.tools.wsdlp.DefinitionFactory.createDefinition(Definitio
nFactory.java:71)
at
weblogic.webservice.tools.wsdlp.WSDLParser.<init>(WSDLParser.java:62)
at
weblogic.webservice.WebServiceFactory.createFromWSDL(WebServiceFactory.java:
106)
at
weblogic.webservice.WebServiceFactory.createFromWSDL(WebServiceFactory.java:
82)
at
weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:67)
at Client.main(Client.java:136) -
when trying to set up my personal email account, following the on screen instructions, it comes back with CANNOT CONNECT USING SSL, do you want to try setting up the account without ssl? Yes or No
Since Thunderbird does not run on iPads, what does this have to do with Thunderbird?
-
When I try to set up my Optimum email account I get an error message saying Cannot Connect Using SSL.
What mail provider is it?
Have you Googled for: setup XXX email on iPhone
where xxx is the provider
You can try going to Mail>the accounts>Advanced and turn Use SSL on or off, the opposite of what it is now. -
Cannot connect using FaceTime on my IMAC with an iPhone 5
Cannot connect using FaceTime on my IMAC with an iPhone 5.
sry, but you posted this in the wrong forum
this is the PowerPC forum, which is for machines built before about 2001.
post it in the INTEL forum -
how do i set up email on my iphone??? it says "cannot connect using ssl" whats this mean, i cant recieve or send emails coz of this
Try just choosing yes when it says that. And yes if you get it a second time. Lots of mail providers don't use SSL.
-
I am running a macminiserver on ahome newtwork. Original running snow leopard and then upgraded to 10.7 lion on all machine and everything was working fine. Clients coul connected to shared drives on the server using afp. However, after upgrading to 10.7.1 on the server and client machines, they can no lnger connect to the drives using afp, however you can connect using smb.
I ahve tried stopping and starting the afp server, rebuilding permissions on the server - still cannot connect using afp.
Any ideas?Be sure the correct Lion afp port is open on your router, even if you are using an Airport (port 548 tcp). Just do a search on "Mac OS X Lion ports".
Also, if this is outside of the network, use the full server name in the Finder's Connect to Server, afp://server.com; when it prompts for a username, enter your first name and last name (not your short name) and then you also need to enter your password. If you don't have a fqdn, then you can use the static ip for "server.com"
It should work, working for me inside and outside of the network. Admittedly, I don't think you need the port on the router for internal use, but you can test both ways.
When working outside of the network a vpn is not required. -
I m trying to add my gmail acoount to mail app but when i click on next button it is showing following message, cannot connect using ssl, what to do???
Some of the following may help:
How to enable imap: https://support.google.com/mail/troubleshooter/1668960?rd=1
For your username, did you enter the full name including "@gmail.com"
Do you have gMail 2-step verification turned on? If so, you need to use an application-specifc password instead of your normal password if using a mail app: https://support.google.com/mail/answer/1173270?hl=en -
trying to set up my tiscali email address on an ipad mini, after trying to verify, message comes up stating "cannot connect using SSL"
Not sure what the shortcut is. I'm just going, Settings > Mail > Add Account > Gmail
That is the GMail shortcut. That should work. Just for testing, use the "Other" shortcut.
Settings / Mail / Add Account / Other
Name: <put your name>
Email [email protected]
Incoming server: pop.gmail.com
Login: [email protected]
Password: yourpassword
Outgoing server: smtp.gmail.com
Login: [email protected]
Password: yourpassword
Hit SAVE.
It should set itself up correctly without you having to specify anything else. Try that. -
5130 cannot get phone connection, using as modem
Recently purchased 5130 to use as modem for my laptop. Am using sim card from primary phone to access internet (primary phone has internet service), and connection with USB cable. Downloaded PC suite, have Vista OS. Have set specs to phone and internet provider (AT&T) but cannot get connection. Error display says cannot get phone connection. Phone works in phone mode, although cannot see contacts.
( I have a new bluetooth USB adaptor, but do not want to open package if I can get cable to work. No point in opening blue tooth yet as cannot even get phone connection.)
Any advice?Hello, dthurnherr.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting articles that I would recommend going through when experiencing this issue.
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Cheers,
Jason H. -
New (Refurb) AE cannot connect to cable modem
I just got a refurb AE today from Apple and everything seems to work except that it cannot connect to m y cable mdoem (sees no connection). I am using the same cable modem and cable that I use for my Airport Extreme (unplugged power) and everything works fine on it, but not in the AE. Is there anything special in the setup? I have tried resetting to factory defaults and starting all over, but to no avail.
Also, does anybody know if I can take this back to an Apple store and trade it for a new unit (not refurb)? Or would I have to ship it back to Apple?
Message was edited by: danny whittingtonNevermind, I got it working finally. I noticed somebody else's post about turning off the cable modem and then turning it back on, and this seemed to fix the issue. I guess when the modem saw a different device (AE) it did not connect to it. Now I have it setup for my trip next week with an iPad and will now go back to my Airport Extreme for home use.
-
Airport extreme blinking amber light error when connecting to new modem
I have just bought and installed a new modem gateway. It is an Arris TG852G DOC 3.0 model with a built in WiFi router.
After connecting it and activating it through Comcast, I reset, then reconnected my airport extreme MD0331LL/A Model No. A1408 to the new Arris
modem, I am getting blinking amber lights on the base station. I have internet connectivity, but I am still getting an amber light. My wireless devices (ipad and iphones) all see the old network name and id and seem to work just fine.
When I scanned for my airport base station in my airport utility (version 5.6.1) to try to resolve the error message I get
a message stating that the Airport Utility is not detecting any airport devices.
I cannot reset the default settings as these buttons do not work within the Airport Utility.
I suspect interference between the built in router in the Arris and I understand I need to operate it in bridge mode. Can you please help me fix this.
The COMCAST people are extremely unhelpful, and stated that this is not their problem but a problem with my router
as they have provifded me internet connectivity through the modem and the issue is my problem.Try connecting an Ethernet cable from your computer directly to one of the LAN <-> ports on the AirPort Extreme to see if AirPort Utility can detect the AirPort Extreme that way.
If yes, click on the AirPort Extreme and then click directly on the word Status (2nd line on the summary page)
A window will open to explain why the amber light is blinking
If the message indicates that you need to configure the AirPort in Bridge Mode......
Click the Internet icon at the top of the window
Click the Internet Connection tab just below
Change the setting for Connection Sharing to Off (Bridge Mode)
Click Update at the lower right of the window to save the new setting and restart the AirPort Extreme
You can disconnect the Ethernet cable that you were using to configure the AirPort Extreme now
It would be a good idea to power off both the Arris gateway and the AirPort Extreme now
Wait a minute
Start the Arris first, and let it run a full minute
Start the AirPort Extreme next the same way
You should be all set
Maybe you are looking for
-
I need help in Report for production orders for my customer.
Hi All I have scenario where plant A needs the following report for Material XXX which has setting as Stock Trnasfer order from Plant B. Need report withthe following details, Storage Unit number, Material No, Quantity, Planned Order Date in plant A,
-
Issue when creating sales order with Sold-to/Ship-to Party's state tax
Hi All, we have issue while creating Sales Order with picking up of State tax for Ship-to-party & Sold-to-party. <b>When we create a sales order, for the sold to party 140052732 and ship to party 140052733 it is picking state tax. Which should not su
-
Hi all, I am importing an expdat.dmp which is an output of 11g to lower 10g db. So I am using a 11g client to import it to 10g. But I can not understand why some tables got imported while others were not :( The error said that the table already exist
-
Deployment error in WAS 6.4
Hello, I have an Application deployed in Sap J2ee Engine 6.2. I want to deploy the same in WAS 6.4. i am trying to deploy using Deploy tool(deploy tool.bat). When i loaded the Ear file, it got loaded, but when deploying it after adding the Library re
-
Where are the web templetes, web items and queries stored?
Hi, I have created many reports using Web Application Designer and Query Designer, Now I want to get these reports and querys in my webDypro program, so i think first i must find out where can i find them, anybody know which table store the web templ