Cannot connect wifi after updated ios7.1.2

After i updated to ios 7.1.2, i cannot connect wifi but another device can connect wifi normally.

Because...
a) Some people are earnestly trying to help.
b) Some people are clueless about this royal Apple iOS update screwup!
I am extremely ****** off... partly because one of the so-call 'genius' suggestions of "forgetting network" and reapplying degraded my phone from occasional WiFi loss to COMPLETE WiFi loss. Then I wasted two hours trying the other 'genius' suggestions like resetting the entire phone and network settings!
B.S.!
Apple still refuses to acknowledge this problem! What else is new?

Similar Messages

  • Cannot connect to wifi after updating ios7 to both iPhone and iPad?

    Can anyone help? Cannot cannot to wifi since updating new software ios7. On both my iPhone 5 and ipad

    Can anyone help? Cannot cannot to wifi since updating new software ios7. On both my iPhone 5 and ipad

  • I can't connect wifi after updating Windows.

    I installed Windows Embedded 8.1 Industry Pro. And I have 49 important updates. But after updating, I can't connect my wifi. Then I restore system, I can connect again. I have did this some times
    Before, I had installed Windows 8.1 Pro, it was the same problem.
    Please tell me solution. My laptop is Acer Aspire m3 481 which is installed Qualcomm Atheros AR5BWB222 wireless driver

    Download the latest drivers for the Wireless network card that are applicable to Windows 8.1.
    You can check with Acer on this. 
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.
    I did. but it was not fixed. after updating, I can't connect wifi until I restore current system.

  • HT4623 Cannot use wifi after updating to 6.1.2 on my 4S how do I restore this

    Since updating to 6.1.2 my wifi is now greyed out and cannot connect to Wifi.  Please help as I have tried everything.

    Try Settings App > General > Reset > Reset Network Settings. See if better. If still problem, Restore iPhone with iTunes on your computer. See if better. If still problem, and if there is Warranty or AppleCare make Genius reservation or set up Service and take or send iPhone to Apple for resolution.

  • Cannot use wifi after updating to 6.1.2 on my iPhone 4S WIFI solutions proposed by Apple are not working

    Dear Apple.
    I was really happy with my iphone4s, IOS 6.0, great product amazing quality and posibilities BUT.......
    I updated from IOS 6.0 to 6.1.1. and the WIFI nightmare started.
    I waited for a new update to fix the WIFI problems and I updated my iphone 4s from 6.1.1. to 6.1.2. in order to solve these problems related with WIFI connections.
    But IOS 6.1.2. is even worst:
    - WIFI is not working at all. So I cannot download apps greater than 50MB.
    - Battery life is shorter than ever.
    - 3G goes in and out every minute.
    - When you operate the iphone4s you can realize that is hotter than before.
    These problems are unnaceptable and inconsistent with a high quality standard product.
    You can read a lot of blogs, I am not the only one.
    Please give us a solution as soon as possible.
    Best Regards

    Try Settings App > General > Reset > Reset Network Settings. See if better. If still problem, Restore iPhone with iTunes on your computer. See if better. If still problem, and if there is Warranty or AppleCare make Genius reservation or set up Service and take or send iPhone to Apple for resolution.

  • HT4623 I cannot connect to my wifi after updating to iOS 6

    I updated my iPhone 4s to iOS 6.  I cannot connect to my wifi after updating to iOS 6.  I updated while connected to iTunes.  I can no longer connect to the wifi that I had previously used at that location.  However, I can connect to all of the other wifi areas I had previously connected to ie. home, coffee shop, etc.
    I have tried turning off cellular data..  Other than not being able to connect to my office wifi it appears that iOS 6 is working properly..
    Thank you in advance for your assistance

    I have the same problem too and I have not been able to "fix" it. It is very frustrating! My other electronics connected to my wifi:  pc, ipad, iphone 3G,and TV they all working fine. I went to the Apple store and they say this problem is ralated to my network provider, then when I went to AT&T they say it is Apples problem. Who do you believe?
    Luis

  • Iphone 4s cannot auto connect to home wifi after updating to ios 6.1.2

    My iphone 4s will not auto connect to my home wifi after updating to IOS 6.1.2.  I can manually connect to my phone to wifi but it will get disconnect if I'mnot using the phone. Any way to reslove?

    Once the phone goes into sleep mode, it is supposed to auto disconnect from wifi to save battery. Are you saying that once you wake the phone up it will not auto connect at that time?
    Suggest you try and forget the network, then go in and try the reset network settings again and then try to rediscover the network and connect again. Have you tried to do a reset of the phone, but holding the sleep/wake and home buttons together until you see the Apple logo and then release?

  • TS1398 After update iOS7, my iphone 4s not able to connect any Wi-Fi. I tried all the possible ways, but faild.

    After update iOS7, my iphone 4s not able to connect any Wi-Fi. I tried all the possible ways, but faild.

    Settings > General > Reset > Reset Network Settings

  • IPhone 4  cannot update or restore after updating ios7

    Help!  Iphone 4 stuck on recovery mode and cannot get out after updating ios 7.
    1. I already tried this as well, no luck: http://support.apple.com/kb/ht1808
    2. Got caption on Iphone after trying to restore:
    The iPhone could not be restored. An unknown error occured (9)
    3. Tried every trick to get out of recovery, no luck.
    Cannot access work emails! No bueno.
    Help!

    it seems that itunes can't connect to the apple servers. This is usually caused by your firewall. Turn it off. If turning it off doesn't help or you don't have a firewall, goto this site:
    http://www.felixbruns.de/iPod/firmware/

  • Can't connect to wifi after updating to iOS 6

    can't connect to wifi after updating to iOS 6

    really stupid... but click on the arrow to the right of your netowrk and turn off auto-join

  • Please Help!!! 'iTunes cannot connect to iphone update software server'

    I cannot 'Restore' iPhone 3G to pass on to my fiance, after she kindly allowed me to get a new iPhone4 because iTunes 'cannot connect to iphone update software server'. I have tried both our laptop and desktop - both connecting to the internet fine - but neither will connect to the iTunes store nor update servers!!
    Not sure what to try next, have tried setting up new user to no avail.
    I have followed the support guidance and I am not connected through proxy.
    Diagnostics reported as follows:
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    Dell Inc. Dell DV051
    iTunes 9.2.1.5
    QuickTime 7.6.6
    FairPlay 1.8.20
    Apple Application Support 1.3
    iPod Updater Library 9.2d4
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.1.0.62
    Apple Mobile Device Driver 1.49.0.0
    Bonjour 2.0.2.0 (214.3)
    iTunes Serial Number 098625257EFAC14A
    Current user is an administrator.
    The current local date and time is 2010-07-25 12:16:28.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Video Display Information
    Intel(R) 82915G/GV/910GL Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {F45A9B15-8BE6-4964-8534-71947B51A91B}
    Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
    IP Address: 192.168.1.77
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: No
    DHCP Server: 255.255.255.255
    Lease Obtained: Thu Jan 01 00:00:00 1970
    Lease Expires: Thu Jan 01 00:00:00 1970
    DNS Servers: 192.168.1.1
    192.168.1.1
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2010-07-25 10:25:45.
    ** Device Connectivity Tests **
    iPodService 9.2.1.5 is currently running.

    Right, I'm going to try something, if this works, then this'll probably fix a lot of iTunes problems.
    1: Make sure your whole iTunes database is backed up.
    2: Uninstall iTunes, then run "Revo Uninstaller", this will remove ALL traces of iTunes from you computer, not your library.
    I've found out that when un-installing or re-installing over a previous version of iTunes will carry over some problems from previous versions, or even create problems. Registry leftovers can be a problem also. Completely removing iTunes using "Revo Uninstaller" then re-installing will have the same effect as installing iTunes from a fresh OS install. Typically iTunes should be problem free when installed totally fresh.
    3: Re-install the correct version of iTunes fresh and try again.

  • OSX 10.6.7 gets confused on access and connection rights after updateing device or program

    Hello
    On all our 4 Mac, all with Snow Leopard 10.6.7, I have an issue with storing access and network connection rights after updating programs and devices.
    We have a Canon network printer. Everything worked fine, the necessary programs had the rights to accept incoming network connections. But then I reinstalled the printer on two Macs because of the PDF fonts problem with 10.6.7. But now, the system asks for every single document if incomming connection should be allowed, even if the according program is listed in the firewall as "allow". Deleting the program from the list in the firewall and add it newly did not help.
    The same issue occures now with a selfwritten Applescript program. It access a key in the keychain. I told the system to allow access always, that worked in the beginning, but after updating the program, it does not store the program as allowed any more. I cannot even add it manually to the allowed list for the specific key. Means, I can select the program after clicking the plus, but the program simply not shows up in the list.
    This happened on two Macs up to now, one is the same as the printer problem, but the other does not have the printer problem (up to now).
    What to I have to do, that the program stores the given rights newly, also after updating a device or program?
    Other people have the same problem as you can see here.

    reFX guys were very helpful and took remote connection to my desktop. It was 5 minutes and Nexus2 was up and running.
    The thing was that my hard drive is case sensitive. They just renamed the file white_3_nsk to lower case in
    /Library/Audio/Plug-Ins/Components/Nexus.component/Contents/Resources/. After that, everything is working.
    Hopefully this helps someone in the future who has put fortune to Nexus2 and gets heart attack when it doesn't work.
    Regards,
    Hannu

  • Cannot connect wifi, wrong i.p. address, worked before

    NO FIX FOR WIFI
    cannot connect wifi. thanks for info, as I've read and read but no solution:
    I submit: 2g iPHONE firmware 1.1.1 . used wifi fine but now I get weird I.P. addresses , wrong i.p. address, cannot connect . I have connected fine before and can connect fine with other routers.
    I have had to configure static i.p. in the past if a conflict with other devices but on DHCP normally. setting static i.p. doesnt help, still cannot connect.tried reset network... don't have weird apps like openssh or any wifi apps.
    any ideas?

    I never had a problem with WiFi on my original iPhone until I upgraded to 2.0.1. Then WiFi began to drop out, I would have to tweak a lot of settings to get a connection again and another problem surfaced: my phone started loosing time -- even though I have it configured to "set automatically." (Sometimes I would discover it was hours off). I updated to 2.0.2 as soon as it showed up in my iTunes because I assumed it would fix these problems. WRONG! Now my WiFi is totally broken and my phone is unable to sync with MobilMe. I've turned the "push" and "fetch" settings off and am syncing though iTunes.

  • After update iOS7

    After update iOS7- my husband's and my phones synced. So he deleted all of my contacts off his phone - and they deleted off mine. So I tried to restore my phone from my computer back up - still none of my contacts. Just his.

    This would seem to mimic the problems i am having with my car interface-
    After updating to iOS7 I find that my iPhone 5 has connection issues with the audio system in my 2013 Mercedes ML350. When first plugged in the phone switches the audio system to the iPhone input and begins to play iTunes which it always did, however it resets the connection every ten seconds or so making the interface unusable. It also takes over the audio system so that when I switch to radio for example, which with iOS6 put the iTunes player in pause and switched to the radio, now the radio will play for a few seconds and then when the phone connection resets the phone takes control away from the radio.
    Not sure if this is an iOS7 bug or if something in setup needs to be different. It is very annoying however and because the phone takes control I can no longer charge it in the car.
    Basic phone functions all work through bluetooth and are fine.

  • Just bought a iPhone5, I cannot connect Wifi in my home, whereas, my another iPhone4 can connect Wifi, why? How to resolve? Pls advise. thx.

    Just bought iPhone 5 and try to use Wifi at home, but it cannot connect Wifi, whereas, my another iPhone4 can connect Wifi, why? how to resolve? Pls advise. Thanks.

    Make sure you're updated to iOS 6.0.2, I know that has had something to do with Wi-Fi for a lot of people.

Maybe you are looking for

  • Albums in full

    when i look at the albums in full horizontal (when you can flick the album covers )the program shuts down and goes back to phone view now when look at them in the vertical its fine  i have reset the iphone  but it still does it

  • Defaulting Null Values in an outer join to the last joined row's values.

    I have a situation where I need to fill in the missing values from an outer join with the last values returned by the join. The query is based on a date table, an organization table and a transaction table. SELECT D.DATE_ID, O.ORG_ID, T.VALUE FROM D_

  • IPhoto uses lots of CPU time while idle

    I run iPhoto '08 (7.0.2) on a G4 iMac that I use as a photo and music server. Today I was using the computer to rip some CDs and scan the covers and the computer seemed sluggish. I checked Activity Monitor and saw that iPhoto was using between 20 and

  • Material or any links regarding Project systems

    Hi Guys, Can u provide me the basics and the detail info abt the Project systems,and also the datafowand terminology in the project system. Cheers Sunil Reddy LCP

  • ESATA 5/6 + CF reader

    Hey guys, Is there any way to make the #5 and #6 SATA pathways on the motherboard capable of hot swapping? I just installed two Addonics SATA CF card readers and set them up in my second drive bay [wired to the SATA pathways on the motherboard under